Krups EA9000 User Manual

DEFRNLIT
EN
ENGLISH
WWW.KRUPS.COM
ESPRESSO AUTOMATIC
SERIE EA9000
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page1
14
11
16
15
23
18
19
20
21
12
22
13
17
10
20
ENGLISH
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page3
KRUPS SERIE EA9000
WELCOME
Dear Customer,
Congratulations! You are now the proud owner of an Espresso Automatic Series EA9000. With your machine, you can prepare a wide range of drinks; espressos, coffees or milk-based drinks, entirely automatically. It is designed so that you can enjoy the same quality at home as in a restaurant, whatever the time of the day and throughout the week. You will appreciate both the quality of the result in your cup and its superior ease-of-use.
Thanks to its Compact Thermoblock System with built-in brewing chamber, its 15 bar pump, and because it can use either coffee beans freshly ground just before the coffee is made or ground coffee fed via a funnel, your machine will give you ristrettos, espressos and coffees hot from the first cup with maximum aroma and a fine creamy golden-brown top.
With its exclusive and patented system for preparing milk-based drinks automatically, you can easily make delicious cappuccinos and caffe lattes, without compromise: hot, with the “three layer effect” and thick, creamy froth. Its automatic steam nozzle rinsing and cleaning programmes guarantee hassle-free hygiene for long-lasting performance, cup after cup.
With the hot water function, you can prepare teas and other drinks instantaneously.
You can also personalise all of these drinks using the “Favourites” menu. You can set the volume, proportions, intensity and temperature of your drinks.
The colour touch-screen makes navigation ergonomic and comfortable. It will guide you through each step, from preparing your drink to servicing your machine.
We wish you many years of enjoyment with your Krups machine.
The Krups team
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page4
ENGLISH
A FEW EXPERT TIPS
Here are a few tips for achieving the best results from your machine:
n The quality of your water significantly influences the quality of the flavours. Limescale and
chlorine can alter the taste of your coffee. We recommend that you use the Claris Aqua Filter System cartridge or low mineral-content water to preserve all of the flavours of your coffee.
n When preparing ristretto, espresso and coffee recipes, we recommend that you use
tulip-shaped porcelain cups, preheated beforehand (by running them under hot water, for instance), and whose size is appropriate for the quantity you want to make. For your cappuccino, caffe latte and hot milk recipes, we recommend that you use thick glass cups, for an appealing, precise and gourmet presentation.
n Roasted coffee beans can lose their flavour if they are not protected. We recommended
that you use the amount of beans required for your consumption for the next 4-5 days. As the machine automatically detects when there are no beans, you can be certain that you will always have sufficient beans for preparing your coffee drinks. Though the quality of coffee beans is subjective and varied, we can nevertheless recommend that you use arabica rather than robusta. After a few trials, you will learn how to mix and roast the coffee beans according to your tastes. Lastly, please remember that oily and caramelised coffee beans must be avoided, as they can damage your machine.
n The quality and fineness of the grinding determine the strength of the flavours and the quality
of the crema. The finer the ground, the richer the crema. Moreover, it must be adapted to the drink you want: fine for ristretto and espresso, coarser for coffee. For your comfort, the machine carries out this operation automatically.
n Thanks to the ground coffee funnel and spoon, you can choose to serve your drink
differently. You can vary the flavours and strengths of your coffee as you wish. Ground coffee should ideally be stored in the refrigerator in a hermetically sealed bag.
n You can use pasteurised or UHT, skimmed, semi-skimmed or whole milk, straight from the
refrigerator (7°C). Using special milks (microfiltered, raw, fermented, enriched, etc.) can produce less satisfactory results especially regarding the quality of the froth. However, we recommend that you use fresh, cold milk for pre-programmed recipes.
DEFRNLIT
EN
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page5
KRUPS SERIE EA9000
The duration of this guarantee is 2 years.
Please check your guarantee card for more details on the guarantee conditions in your country.
This appliance is intended for domestic use only and is not suitable for commercial or professional use.
Any use other than domestic will void the guarantee.
The guarantee does not cover damage or faults resulting from improper use, repair by unauthorised
persons or non-observance of the instructions for use. The guarantee will become invalid if all of the
maintenance operations and instructions have not been followed, or if cleaning or descaling products
which do not comply with the original KRUPS specifications are used; if the Claris Aqua Filter System
water filter is not used in accordance with KRUPS instructions. Normal wear and tear of parts (grinding
disks, valves, seals) is exempted from the guarantee, as well as damages caused by foreign objects in
the coffee grinder (e.g. wood, stones, plastic parts etc.).
Caution: For the guarantee to be valid, this machine must be used only with Krups accessories.
!
Manufacturer
SAS GSM Rue Saint-Léonard F-53104 Mayenne France
F 088 Claris ­Aqua Filter System cartridge (1 cartridge supplied)
XS 3000 Packet of 10 cleaning tablets (2 tablets supplied)
F 054 Descaling powder (1 sachet supplied)
ACCESSORIES (sold separately)
Actual appearance may vary
Important: Read these instructions carefully and keep them for reference.
Please follow the safety guidelines.
!
XS 9000 (2 bottles of steam nozzle cleaning liquid)
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page6
DEFRNLIT
EN
ENGLISH
CONTENTS
1
2
3
4
5
7
8
9
10
11
12
6
IMPORTANT INFORMATION ON THE APPLIANCE AND INSTRUCTIONS 6
1.1 Guide to the symbols used in the instructions................................................................................................. 6
1.2 Safety guidelines........................................................................................................................................................... 6
1.3 Correct use
...................................................................................................................................................................... 8
1.4 Products supplied with your machine ................................................................................................................. 9
1.5 Factory check................................................................................................................................................................. 9
OVERALL VIEW 10
2.1 Description of the appliance.................................................................................................................................. 10
2.2 Presentation of the different symbols................................................................................................................ 12
2.3 Main operations of the appliance........................................................................................................................ 12
FIRST USE 15 INSTALLING THE APPLIANCE 15
3.1 Before first use............................................................................................................................................................ 15
3.2 Initial settings ............................................................................................................................................................... 16
3.3 Defining the settings ................................................................................................................................................. 16
PREPARING DRINKS 20
4.1 Information on recipes ............................................................................................................................................ 20
4.2 Preparing coffee-based drinks from coffee beans ...................................................................................... 22
4.3 Preparing coffee-based drinks from ground coffee .................................................................................... 26
4.4 Preparing other drinks: hot milk with or without froth, and hot water ............................................... 28
“FAVOURITES” MENU 32
SETTINGS 35
INFORMATION 37
MAINTENANCE AND CLEANING 39
8.1 Regular maintenance
............................................................................................................................................... 39
8.2 Maintenance menu.................................................................................................................................................... 41
8.3 Automatic cleaning programmes........................................................................................................................ 47
TROUBLESHOOTING 51
TECHNICAL DATA 54
TRANSPORT 54
DISPOSAL OF WASTE 54
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page7
KRUPS SERIE EA9000
6
IMPORTANT INFORMATION ON THE APPLIANCE AND INSTRUCTIONS
n In this manual you will find all of the important information concerning the preparation, use and
maintenance of your automatic coffee/espresso machine. Important safety guidelines are also included. Read these instructions carefully before using your appliance for the first time and keep them for reference: Krups may not be held responsible for any incorrect use.
1.1 Guide to the symbols used in the instructions
n Symbols and associated words used in these instructions.
1.2 Safety Instructions
Conditions of Use
n Do not immerse the appliance in water. Do not immerse the power cord or the mains plug in water or
any other liquid. Any contact of the conductive parts of the appliance with moisture or water may lead to fatal injuries due to the presence of electricity! This appliance must only be used indoors in dry areas.
n In the case of a change in the ambient temperature, from cold to hot, wait for a few hours before
using your machine so that it is not damaged by condensation.
n Avoid leaving the appliance in direct sunlight, exposed to heat, cold, frost or humidity.
n Do not place the appliance on a hot surface such as a hob or close to a naked flame, in order to
avoid any risks of fire or other damage!
n Keep the appliance out of the reach of children.
1
SYMBOL ASSOCIATED WORD MEANING
Danger
Warning against risks of serious or fatal injuries. The lightning bolt symbol warns against electrical dangers.
Caution
Warning against risks of incorrect operation, damage or destruction of the appliance.
Important
Note
General or important note on the operation of the appliance.
!
!
Important: These safety guidelines are intended to protect you and other persons, and the appliance.
They must therefore be respected.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page6
DEFRNLIT
EN
7
ENGLISH
n This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
n Children should be supervised to ensure that they do not play with the appliance.
n In case of ingestion of any of the products supplied with the machine, inform your physician and/or
the poison control centre immediately.
Electrical power supply
n Check that the supply voltage marked on the rating plate of the appliance is the same as that of
your electrical supply. Only connect the appliance to an earthed mains socket.
n Ensure that the mains socket is easily accessible so that the appliance can be unplugged easily,
for example in the event of any failure or a thunderstorm. For the safety of the appliance, unplug it from the socket during thunderstorms. Do not pull on the power cord to unplug it from the socket.
n Unplug it from the mains socket immediately if any operational failure occurs or if there is a problem
with brewing. Unplug the appliance when it is not to be used for a long period and when you are cleaning it.
n Do not use the appliance if the power cord or the appliance itself is damaged.
n If the power cord or the mains plug is damaged, they must only be replaced by an approved
KRUPS service centre.
n Do not let the power cord dangle over the edge of a table or a worktop. Do not leave the power
cord close to or in contact with the hot parts of the appliance.
n We do not recommend the use of extensions or multi-adapter plugs.
n Any incorrect connection invalidates the guarantee.
Appliance
n Do not pour water into the coffee bean container and/or under the ground coffee funnel.
n Except for cleaning and descaling as described in the instructions for the appliance, all work on
the appliance must be carried out by a KRUPS approved service centre.
n For your safety, only use KRUPS approved accessories and consumables as they are perfectly
adapted to your appliance.
n Unplug the appliance when leaving the room or your home for prolonged periods.
n Never open the appliance, as there is a risk of fatal injury due to electricity! Any unauthorised
opening of the appliance invalidates the guarantee. Do not use your appliance if it is not working correctly or if it has been damaged. In such cases, we recommend having the appliance checked by a KRUPS approved service centre (see the list in the KRUPS Service handbook).
n For safety and approval (CE) reasons, any transformation or modification of the appliance carried
out by an individual is prohibited, as only tested appliances have been approved and the manufacturer is absolved of all responsibility in the event of damage.
Danger: Failure to respect these guidelines may lead to fatal injuries due to electricity!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page7
KRUPS SERIE EA9000
8
n When producing steam for making cappuccino, hot milk or hot water, do not block the mechanism
that brings the steam nozzle forward, downward, upward or backward. In such cases, the manufacturer is absolved of all responsibility in the event of damage to the appliance and the guarantee will not apply.
n For your safety, while producing steam for making cappuccino, hot milk or hot water, do not place
your hand under the steam nozzle.
n The steam nozzle can be hot. Do not handle it during or immediately after a preparation.
n Do not place your hand or any other obstacle in front of the nozzle that can hinder the movement of
the nozzle.
n If you do not set a cup in place or if you do so incorrectly, there may be risks of pinching or scalding.
n Do not put anything but ground coffee or the cleaning tablet in the funnel provided for this purpose;
do not add more than the maximum dose of ground coffee (1 spoon). In such a case, any damage to the appliance will not be covered by the guarantee.
Use and Maintenance
n In the event of a problem or incorrect operation, check the appliance and try to resolve the problem
(see Section 9: “Troubleshooting”) or have the appliance repaired if the problem persists.
n Always refer to the instructions for descaling/cleaning the appliance. Unplug from the socket before
any maintenance operation.
n Should cleaning or regular maintenance not be carried out or if there is a foreign body in the grinder
or in the ground coffee funnel, the guarantee will not be valid.
1.3 Correct use
n This Espresso Automatic Series EA9000 coffee/espresso machine must only be used to prepare
espresso, coffee, hot water or to froth milk.
n This appliance is designed for domestic use only. It is not intended to be used in the following
environments and the guarantee will not apply for:
- staff kitchen areas in shops, offices and other working environments,
- farmhouses,
- by clients in hotels, motels and other residential-type environments,
- bed and breakfast-type environments.
n This Espresso Automatic Series EA9000 coffee/espresso machine is not designed for commercial or
professional use. Any use other than that described in this manual does not comply with these recommendations and may lead to injuries and damage to equipment as well as damage or destruction of the appliance (see Section 1.2, “Safety guidelines”).
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page8
DEFRNLIT
EN
9
ENGLISH
1.4 Products supplied with your machine
n Check the products supplied with your machine. If any parts are missing, contact our helpline (see
3.2: “Initial settings”).
Parts supplied:
n Espresso Automatic Series EA9000
n 2 bottles of steam nozzle cleaning liquid
n 2 cleaning tablets
n 1 descaling sachet
n Claris – Aqua Filter System cartridge with fitting accessory
n 2 cappuccino cups
n Ground coffee spoon with built-in brush
n 1 stick for testing water hardness
n Instructions
n List of approved Krups service centres
n Guarantee documents
n 1 power cord
n 1 cleaning needle
1.5 Factory check
n Your appliance has been checked and tested before leaving the manufacturing plant. Despite all
the care given to its cleaning, you may find traces of coffee in the coffee grinder and/or coffee drops on the drip tray grid. Thank you for your understanding. We also recommend that you rinse the appliance one or more times before you use it for the first time or if you have not used it for several days.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page9
KRUPS SERIE EA9000
10
OVERALL VIEW
2.1 Description of the appliance
n The fold-out page shows a photo of the appliance. Fold out this page. The various controls of the
appliance are listed below with a brief description of them:
2
No. IDENTIFICATION FUNCTION
1 ON/OFF button To switch the appliance on and off.
2 Ground coffee button
To access the machine’s ground coffee function and to unlock the ground coffee funnel.
3 Colour touch screen To access the recipes and other functions of the machine.
4 Removable water tank + lid Contains water for preparing recipes, cleaning and rinsing.
5 Used coffee collector Collects the used ground coffee.
6
Small drip tray and grid: can be removed to position tall cups
To collect water or coffee that might flow out of the appliance during/after preparation.
It can be removed to use taller cups (large recipes, caffe latte in particular).
7 Large drip tray with metal contacts
Collects water flowing out of the appliance (when draining the Thermoblock and hydraulic system) or water coming from the small drip tray.
8 Steam/hot water nozzle
To produce steam to heat or froth milk.
Or
To produce hot water.
9 Steam/hot water tube
10 Steam nozzle tip
11 Steam nozzle cleaning container For automatic programmes that rinse and clean the milk nozzle.
12 Ground coffee funnel
Holds the ground coffee.
Holds the cleaning tablet during the automatic cleaning programme.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page10
DEFRNLIT
EN
11
ENGLISH
No. IDENTIFICATION FUNCTION
13 Cup rest To hold and preheat cups.
14 Right door To access the water tank.
15 Left door
To access the cleaning liquid bottle, the ground coffee spoon/brush and the used coffee collector.
16
Coffee nozzles and height-adjustable handle
To dispense the prepared coffee recipe.
17 Power cord To supply power to the machine (removable).
18 Cleaning liquid bottle
Contains the product necessary for automatic cleaning of the steam nozzle.
19 Cleaning liquid bottle drawer Holds the cleaning bottle (fitting).
20
Ground coffee spoon with built-in brush
To measure the quantity of ground coffee necessary to prepare a ground coffee.
The brush is used to remove ground coffee residue from the ground coffee funnel.
21 Removable bean container lid
Closes the bean container. (Just open the removable lid slightly using the notches on the side of the bean container. Then it opens by itself.)
22 Coffee bean container
Holds the coffee beans and is equipped with automatic detection.
23 LED cup lighting Illuminates your drink as it is being prepared.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page11
KRUPS SERIE EA9000
12
2.2 Presentation of the different symbols
n The table below summarises all the symbols used on the screen:
To confirm the step.
To return to the previous step.
To scroll through the different options.
To bring the steam nozzle up in some menus.
To bring the steam nozzle down in some menus.
To go to the next step or stop a preparation in progress. For example, during a cycle of cappuccino, to move from phase the foaming phase to the coffee phase during coffee recipe or interrupt the coffee phase at the end of recipe.
To stop the cycle during preparation.
2.3 Main operations of the appliance
n Turning the appliance on or off
n Filling the bean container
Open the bean container lid.
Put in the coffee beans. Close the bean container
lid.
Press the “On/Off” button.
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page12
DEFRNLIT
EN
13
ENGLISH
n Filling the water tank
n Emptying the used coffee collector
n Emptying the drip trays
Open the right door. Lift and pull the tank out. Replace the tank.Fill the tank.
Open the right door. Remove the used coffee
collector.
Replace the used coffee collector.
Empty the used grounds.
Remove the small drip tray. Empty the small drip tray. Empty the large drip tray.
Wipe the metal contacts.
Remove the large drip tray.
Replace the large and small drip trays.
h h
hh
h
h
h
h
h
h
h
1
2
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page13
KRUPS SERIE EA9000
14
n Adjusting the coffee nozzle height
n 2 espresso cups under the nozzles
n Coffee cup under the nozzles
n Cappuccino cup on the small drip tray
n Caffe latte glass without the small drip tray
Your machine is supplied with two cups (for cappuccino and caffe latte).
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:38 Page14
DEFRNLIT
EN
15
ENGLISH
FIRST USE
3
INSTALLING THE APPLIANCE
n Place your machine on a stable, flat, heat-resistant surface away from water splashes and
sources of heat. Ensure that the location chosen is sufficiently well ventilated, as the appliance gives off heat. Please do not place the appliance on surfaces such as marble. Remove the protective films from the display and grids.
3.1 Before first use
n Before using the appliance for the first time, check the hardness of your water so that you can set
the appliance accordingly. This operation should also be carried out when you use your machine in a place where the hardness of the water is different or if you notice a difference in the hardness of the water. To check the water hardness, use the stick supplied with your machine or contact your local water authority.
Measuring the water hardness
n
Fill a glass of water and immerse the stick in it for 5 seconds. Wait for a minute before reading the water hardness. You will be asked for the hardness class observed (from 0 to 4) during the initial setup of the machine. The red zones on the stick indicate the degree of hardness: class 0 = no red zone, i.e. your water has a very low mineral content. Your water is more or less hard depending on the number of red zones. The details of the classes are given in the table below:
Degree of hardness
Class 0 Class 1 Class 2 Class 3 Class 4
° dH < 3° > 4° > 7° > 14° > 21°
° e < 3,75° > 5° > 8,75° > 17,5° > 26,25°
° f < 5,4° > 7,2° > 12,6° > 25,2° > 37,8°
Appliance
setting
0 1 2 3 4
01234
The water hardness classes for the initial setting of the appliance (section 3.2)
Danger: Connect the appliance to an earthed mains socket. Voltage 220 - 240V. Failure to do
so means that you run the risk of fatal injury due to electricity! Respect the safety guidelines (see section “Safety guidelines”).
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page15
KRUPS SERIE EA9000
16
n When your machine displays this screen to you, or when you have performed the water hardness test,
you must indicate the number of red and green zones, using the touch screen. If the stick shows 2 red zones and 2 green zones, press the first two red squares and the last two green squares on the touch screen. The screen will then show an identical representation of your stick.
If you move home or if the quality of your water changes significantly, you can also reset the water hardness at any time.
3.2 Initial settings
n When using the machine for the first time, you will be prompted to configure various settings. Follow
the indications displayed on the screen. The aim of the following paragraphs is to give you a few visual cues.
3.3 Configuring the settings
n Switch on the appliance by pressing the ON/OFF button (1). A welcome message is displayed on the
screen, followed by the “Language” setting menu. After each selection, you can go back by using the
symbol. Configure the other settings by following the indications on the screen.
LANGUAGE
n Your machine has a touch screen.
n Select a display language by pressing the arrows until “Hello” appears in the
language of your choice.
n Press OK to confirm.
HOTLINE
n The number is associated with the country you have selected. However, you
can modify this number, as it may change over time.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page16
DEFRNLIT
EN
17
ENGLISH
DATE
n The correct date should normally be displayed automatically. If necessary,
you can adjust the day, month and year using the arrows.
n Press OK to confirm.
TIME
n Press the desired time format.
n For 12 hour format (AM/PM): set the hours, the minutes and lastly AM or
PM. Press the corresponding box to confirm. You can go back using the symbol.
n For 24 hour format: set the hours and then the minutes.
VOLUME UNIT
n Select oz or ml as the volume unit, and press the corresponding box to
confirm.
AUTO-OFF
n Auto-off: you can select the length of time after which your appliance
switches off automatically: from 15 minutes to 2 hours, in steps of 15 minutes.
n Set the auto-off time using the arrows.
n Press OK to confirm.
WATER HARDNESS
n You must set your machine depending on the hardness of your water, from
0 to 4 (see p. 15 and p. 16).
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page17
KRUPS SERIE EA9000
18
INSTALLING THE FILTER (LATER)
n Press “Later” and confirm.
n Remove the water tank from inside the right door.
n Fill the water tank and then put it back in the machine.
n Close the right door again.
INSTALLING THE FILTER (NOW)
n Filter installation: press “Now“.
n Open the right door of the machine and remove the water tank.
n Remove the filter cartridge and the fitting accessory from the packaging and
assemble the cartridge fitting accessory as illustrated.
n Set the month when the cartridge is fitted (position 1 on the illustration, left
side figure in the opening) by turning the grey ring located on the upper end of the filter. The month when the cartridge should be replaced is indicated in position 2 on the illustration.
n Attach the cartridge fitting accessory to the filter cartridge as shown in the
illustration.
n Take off the removable lid.
n Screw the filter cartridge into the screw thread at the bottom of the water
tank: place the filter cartridge into the thread and screw in the cartridge. Remove the cartridge fitting accessory from the filter cartridge.
n Fill the water tank and then put it back in the machine.
n Close the right door. Your machine will fill the filter cartridge.
Note: The filter cartridge must be replaced approximately every 50 litres of water
or at least every 2 months. Your machine tells you how many days or litres remain before you need to change the cartridge. (see Section 7, “Info menu”)
!
h
h
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page18
DEFRNLIT
EN
19
ENGLISH
Note: If the first use cycle is interrupted before it has fully completed, you will be asked to save certain
parameters again or to confirm certain settings.
!
Important: Ensure that all of the lids, covers and doors are closed and that all parts of the machine are
fitted correctly before starting to prepare a drink.
!
INSTALLING THE CLEANING LIQUID
n Press “Now” to confirm or “Later” to do it later.
n Open the left door (15). Pull the container (19) and screw the bottle (18)
onto the container.
n Replace the container back with the bottle and close the door.
n Do not screw in the bottle fully.
n The bottle must be positioned in line with the drawer.
AUTOMATIC STEAM NOZZLE CLEANING PROGRAMME
n Your machine will prompt you to start this programme.
n To do so, press “Now“. The cycle will last about 5 minutes and the screen
will display the progress of the cleaning.
PREHEATING, AUTOMATIC MAINTENANCE, RINSING
n The machine will start by preheating the circuits, then will carry out an
automatic test and finally will ask you if the appliance needs to be rinsed or not.
n Place a container under the coffee nozzles and press YES if this is required.
The rinsing procedure starts and stops automatically, after around 40 ml have passed through.
n The main drink selection menu is then displayed on the screen.
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page19
KRUPS SERIE EA9000
20
PREPARING DRINKS
4.1 Information on recipes
n Depending on the recipes chosen, your Espresso Automatic EA9000 will automatically adjust the
quantity of ground coffee as well as the grinding fineness. We recommend that you use appropriately sized porcelain cups, ideally preheated. For your milk-based recipes, we recommend that you use thick glass cups.
Table of drinks and parameters modifiable by the user
4
COFFEE RECIPES
Number of cups
possible
Possible settings
Volume (ml)
Possible settings
Strength
RISTRETTO
1 20 to 35 ml (per 5 ml)
ESPRESSO
1
2 x 1
40 to 70 ml (per 10 ml)
2x 40 to 70 ml (per 10 ml)
in a single cycle
COFFEE
1
2 x 1
80 to 160 ml (per 10 ml)
2x80 to 160 ml (per 10 ml)
in two cycles
Automatic
Automatic
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:11 Page20
DEFRNLIT
EN
21
ENGLISH
n Cappuccino is made with following proportions:
1/3 milk + 1/3 coffee + 1/3 milk froth.
n Caffe Latte is made with following proportions:
3/5 milk + 1/5 coffee + 1/5 milk froth.
n Hot milk with frothing is made with following proportions:
3/5 milk + 2/5 milk froth.
Cappuccino Final volume Milk Coffee
Small
180 ml 60 ml 60 ml
Medium
240 ml 80 ml 80 ml
Large
300 ml 100 ml 100 ml
Hot milk with frothing Final volume Milk
Small
180 ml 100 ml
Medium
240 ml 150 ml
Large
310 ml 200 ml
Hot water Final volume
From 20 ml to 250 ml
Caffe Latte Final volume Milk Coffee
Small
140 ml 80 ml 30 ml
Medium
200 ml 120 ml 40 ml
Large
260 ml 160 ml 50 ml
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page21
4.2 Preparing coffee-based drinks with coffee beans
n This section explains how to operate the machine using its features, taking the example of espresso
and cappuccino.
n Espresso
KRUPS SERIE EA9000
22
1
n Press the “Espresso” button on the touch screen.
n If the machine detects no beans when you request this recipe, it will ask
you to fill the bean container (see section 2.3).
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
2
n Place the cup(s) under the coffee nozzles.
n You can lower or raise the coffee nozzle to suit the size of your cup(s).
3
n Possible settings
n You can prepare one or two cups with your appliance.
n Choosing the strength: The more beans you select, the stronger the
preparation will be. You can modify the strength using the arrows on the left and right of the symbols (except in the case of double espressos).
n Choosing the volume: The screen displays the last volume setting
associated with espresso. You can modify this volume using the arrows on the left and right of the indicated value .
n Press the “Start” button on the touch screen to start the preparation.
4
n Preparing an espresso
n The machine starts preheating, if required, and then grinds the beans,
tamps the ground coffee and finally brews the coffee.
n You can adjust the coffee volume during the cycle using the up and down
arrows.
n You can stop the preparation by pressing the “Stop” symbol or the On/Off
button (1) or the ground coffee button (2).
n Remove the cup when the screen shows: Your espresso is ready.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page22
DEFRNLIT
EN
23
ENGLISH
n Cappuccino
1
n Press the “Cappuccino” button on the touch screen.
n If the machine detects no beans when you request this recipe, it will
ask you to fill the bean container (see section 2.3).
n If the machine detects no water when you request this recipe, it will
ask you to fill the tank.
2
n Choosing the volume (small/medium/large).
n The screen shows the last volume setting associated with cappuccino
(volume of milk + volume of coffee + volume of froth). You can modify this selection using the arrows on the left and right of the indicated value (small – medium - large).
n Press the “Start” button.
3
n Fill the cup with the volume of milk indicated.
n Pour the quantity of milk indicated on the screen into the cup.
n Press the OK button.
Important: To prepare your Krups milk-based recipes to perfection:
n The recipes suggested were made with cold semi-skimmed UHT milk, straight from a refrigerator (7°C), and served
in the cups supplied with the machine.
n You can also use (fresh) cold pasteurised or UHT skimmed, semi-skimmed or whole milk, straight from the
refrigerator. What is important is that it should be fresh and at this temperature. Using special milks (microfiltered, raw, fermented, enriched, etc.) can produce less satisfactory results especially when it comes to the quantity and quality of the froth.
n To guarantee the best results, we recommend that you follow the indicated proportions and use the cups supplied
with your machine
n If you use a cup other than those supplied with the product, make sure you choose a cup suitable for the volume
in the recipe (taking frothing into account).
n If your milk is at room temperature, reduce the pre-heating time (press >> during the recipe).
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page23
KRUPS SERIE EA9000
24
Caution: Caution: Do not place your hand or any other obstacle in front of the nozzle that can hinder
the movement of the nozzle. Caution: If you do not set a cup in place or if you do so incorrectly, there may be risks of pinching or scalding. If you press the Stop button, the entire recipe is stopped, and therefore the brewing will be cancelled. The unused ground coffee will then be ejected.
!
4
n Place the cup under the coffee nozzles.
n The cup must be placed close to the cleaning container, under the steam
nozzle, at the back of the niche.
n However, do not press the cleaning container (11) with the cup; otherwise,
it might break off.
n You can lower or raise the coffee nozzle to suit the size of your cup. The
steam nozzle will descend just behind the coffee nozzles. Caution: the maximum height of the cup is defined by the coffee nozzles; do not tilt the cup to place it under the coffee nozzles.
n To use a large cup (or mug), you might have to remove the small drip tray (6).
n Press the “OK” button.
5
n Milk preheating phase: The milk is first preheated and during this
time the beans are ground for preparing the coffee.
n The nozzle moves forward and goes down into the milk
n The nozzle tip must be submerged in the milk by 1 cm for perfect results.
If this is not the case, the cup is not suitable for the volume chosen; stop the preparation using the “Stop” button and change the cup.
n If the milk used is at an initial temperature higher than 7°C, you can
shorten the preheating time by pressing “>>” and move on to frothing to avoid “spoiling” the recipe.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page24
7
n Coffee dispensing phases.
n The machine tamps the ground coffee and then brews it.
n The volume is consistent with the chosen recipe.
n However, you can modify the coffee volume during the cycle.
n You can stop the preparation by pressing the “Stop” button.
n Remove the cup when the screen shows: Your cappuccino is ready.
n Add a little sugar or some chocolate chips/powder to taste. You must
add the sugar only at the end of the preparation.
6
n Milk frothing phase: The milk is then frothed according to the
chosen recipe.
n You can increase or decrease the frothing time. (Make sure the cup
does not overflow).
n Press the “>>” button to stop the frothing and move on to preparing
the coffee.
DEFRNLIT
EN
25
ENGLISH
8
n Automatic rinsing of the nozzle.
n The nozzle is rinsed automatically after every milk-based preparation
to guarantee the hygiene of the machine.
n You must wait for this rinsing to be complete before starting the next
preparation.
Important: The production of steam does not stop immediately after you press the “>>” button
(it takes 3 to 5 seconds to stop). Press the button sufficiently early to avoid overflows.
n The nozzle moves up and draws back to return to its cleaning container.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page25
KRUPS SERIE EA9000
26
4.3 Preparing coffee-based drinks with ground coffee
n With your Espresso Automatic EA9000, you can prepare your drinks from ground coffee, if you prefer
decaffeinated coffee, if you want variety, or if you have run out of beans.
n Espresso via the “ground coffee menu”
n This section describes how the recipes function when you use ground coffee via the ground coffee
funnel, taking the example of espresso. The other recipes are similar. Just follow the instructions on the different screens.
1
n Press the ground coffee button.
2
n The ground coffee funnel is unlocked.
n Press the “Espresso” button on the touch screen.
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
3
n Place the cup under the coffee nozzles.
n You can lower or raise the coffee nozzle to suit the size of your cup.
Caution: The volume available under the lid is the maximum quantity of ground coffee permissible.
Please put the ground coffee only once into the funnel for each recipe. Do not tamp the ground coffee inside the funnel. If you open the lid and close it again without putting in ground coffee, the machine will perform a self-test. If an object falls into the machine, you must unplug it and take it to the after-sales service centre. The ground coffee funnel is locked. To unlock it, press the ground coffee button.
ANY DAMAGE CAUSED BY INTRODUCING AN EXCESSIVE QUANTITY OF GROUND COFFEE WILL NOT BE COVERED BY THE GUARANTEE.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page26
DEFRNLIT
EN
27
ENGLISH
6
n Introducing the ground coffee.
n Pour the ground coffee into the funnel.
n Use only one spoon of ground coffee for each recipe.
n Close the ground coffee funnel lid.
n The funnel is then locked by the machine.
5
n Use the coffee spoon (20) in the left door.
4
n Open the ground coffee funnel lid.
n If you notice moisture inside the funnel, it is recommended that you
wipe it dry.
7
n Choosing the volume.
n The screen displays the last volume setting associated with ground
coffee espresso. You can modify this volume using the arrows on the left and right of the indicated value.
n Press the “Start” button.
8
n Preparing coffee.
n The machine tamps the ground coffee and then brews it.
n You can stop the preparation by pressing the “Stop” button.
n Remove the cup when the screen shows: Your espresso is ready.
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page27
KRUPS SERIE EA9000
28
4.4 Preparing other drinks: hot milk with or without froth, and hot water
n Hot milk with frothing
1
n Press the “Hot Milk” button on the touch screen.
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
2
n Choosing: with or without froth.
n Check the “Frothing” box if you want froth in addition to hot milk.
n When you choose a milk recipe “without frothing”, there can still be a very
fine layer of froth.
n Press the “Start” button to start the preparation.
3
n Choosing the volume (small/medium/large).
n The screen displays the volume of milk to be poured into the cup. You can
modify this volume using the arrows on the left and right of the indicated value.
4
n Fill the cup with the volume of milk indicated on the screen.
5
n Place the cup under the coffee nozzles.
n The cup must be placed close to the cleaning container, under the steam
nozzle, at the back of the niche.
n However, do not press the cleaning container (11) with the cup; otherwise,
it might break off.
n You can lower or raise the coffee nozzle to suit the size of your cup. The
steam nozzle will descend just behind the coffee nozzles. Caution: the maximum height of the cup is defined by the coffee nozzles; do not tilt the cup to place it under the coffee nozzles.
n To use a large cup (or mug), you might have to remove the small drip tray
(6).
n Press the “OK” button.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page28
DEFRNLIT
EN
29
ENGLISH
6
n Milk preheating phase.
n The nozzle moves forward and goes down into the milk
n The nozzle tip (10) must be submerged in the milk by 1 cm for perfect
results. If this is not the case, the cup is not suitable for the volume chosen; stop the preparation using the “Stop” button and change the cup.
n If the milk used is at an initial temperature higher than 7°C, you can
shorten the preheating time by pressing “>>” and move on to frothing to avoid “spoiling” the recipe.
7
n Milk frothing phase: The milk is then frothed according to the
chosen recipe.
n You can increase or decrease the frothing time. (Make sure the cup
does not overflow).
n Press the “>>” button to stop the frothing.
8
n The nozzle moves up and draws back to return to its cleaning
container.
n Remove the cup when the screen shows: Your milk is ready.
9
n Rinsing the nozzle.
n The nozzle is rinsed automatically. You must wait for this rinsing to
be complete before starting the next preparation.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page29
KRUPS SERIE EA9000
30
n Hot water
1
n Press the “Hot water” button on the touch screen.
n If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
2
n Choosing the volume.
n The screen displays the last volume requested. You can modify this volume
using the arrows on the left and right of the indicated value.
3
n Place your cup under the coffee nozzles.
n To use a large cup (or mug), you must remove the small drip tray. Make
sure that the cup fits under the coffee nozzles without interference.
n The cup must be placed close to the cleaning container.
n Caution: use a cup that matches the volume of the recipe. The maximum
height of the cup is defined by the coffee nozzles; do not tilt the cup to place it under the coffee nozzles.
n Caution: Do not press the cleaning container (11) with the cup; otherwise,
it might break off.
4
n Press OK. The nozzle then comes out of its cleaning container to stop
just above your cup.
n You can modify the nozzle position using the + and - symbols according to
your convenience. If the nozzle is too high from the bottom of the cup, there is a risk of splashing. Caution: The nozzle must not touch the bottom of the cup either.
n Press the OK button on the touch screen.
Caution: Caution: Do not place your hand or any other obstacle in front of the nozzle that can hinder
the movement of the nozzle. Caution: If you do not set a cup in place or if you do so incorrectly, there may be risks of pinching or scalding.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page30
DEFRNLIT
EN
31
ENGLISH
5
n Dispensing hot water through the steam nozzle.
n If necessary, the machine goes into preheating mode, then begins to
dispense hot water.
n You can modify the volume of your preparation using the arrows on
the left and right of the indicated value.
n Press “Stop” to stop the recipe.
6
n The nozzle moves up and draws back to return to its cleaning
container.
n Remove the cup when the screen shows: Your hot water is ready.
Important: The production of hot water does not stop immediately after you press the “Stop” button
(it takes 3 to 5 seconds to stop). Press the button sufficiently early to avoid overflows.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page31
KRUPS SERIE EA9000
32
“FAVOURITES” MENU
n The “Favourites” menu on your Krups Espresso Automatic Series EA9000 allows you
to save your favourite recipes and to customise them to your tastes and habits. You can create up to 8 profiles, which can contain up to 8 recipes each. The screens will guide you very intuitively through this entire menu. This section aims to explain the various features this programme offers you, taking the example of espresso.
n Customisable recipes are those in the main menu (see page 21).
n The following criteria can be customised, depending on the recipes: volume of coffee, coffee strength,
coffee temperature, volume of milk, preheating time and milk frothing time.
5
RECIPES STEP 1 STEP 2 STEP 3
Ristretto Choice of volume Confirm the name
Espresso Choice between 1 or 2 cups
1.Volume selection
2.Coffee strength (3)
3.Temperature (3)
Confirm the name
Coffee Choice between 1 or 2 cups
1.Volume selection
2.Coffee strength (3)
3.Temperature (3)
Confirm the name
Cappuccino
1.Volume of cold milk
2.Frothing time**
1.Coffee volume
2.Coffee strength (3)
Confirm the name
Caffe Latte
1.Volume of cold milk
2.Preheating time*
3.Frothing time**
1.Coffee volume
2.Coffee strength (3)
Confirm the name
Hot milk 1.Choice of frothing or not
1.Volume of cold milk
2.Preheating time
3.Frothing time**
Confirm the name
Hot water Choice of volume Confirm the name
STEPS AND RECIPE SETTINGS IN THE “FAVOURITES” MENU
n To enter the “Favourites” menu, press the corresponding visual in
the main menu.
n Before creating customised recipes, you must create a user profile.
* Allows you to increase the temperature of your recipe. ** Allows you to increase the proportion of froth in your recipe.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page32
DEFRNLIT
EN
33
ENGLISH
CREATING A PROFILE
1
n The first time you go to the “Favourites” menu, your machine
will prompt you to create a new profile. Press the OK button.
n During subsequent uses, press the icon to create a new
profile.
2
n Then enter the name of your profile using the alphabetic keypad
displayed on the screen and confirm by pressing OK.
3
n You must then select a colour for your profile. Choose it and confirm by
pressing OK.
4
n Your profile will then appear in the Favourites menu. You can associate
up to 8 recipes with it. When you press the profile button, you will access the list of recipes associated.
NB: At any time, you can:
n Create a new profile by pressing the + button
- You must then repeat the same operations, i.e. enter the name and choose the colour.
n Modify the profile characteristics by pressing the (Change) button.
- Choose the profile you want to modify
- Modify the name entered
- Modify the colour
- Confirm by pressing OK.
n Delete one or more profile(s) by pressing the (Delete) button.
- Choose the profile(s) you want to delete
- Confirm by pressing the OK button.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page33
KRUPS SERIE EA9000
34
1
n After creating the profile, you can associate a recipe with this profile
by pressing the + button.
n Several recipes are then displayed on the screen. Choose the Espresso
recipe, in this case.
2
n Choosing the number of cups: Choose 1 or 2 cups by pressing the
appropriate box.
3
n Choosing the coffee settings: Choose the volume (40 to 70 ml), strength
(1 to 3 beans) and temperature (levels 1 to 3) of the espresso you want to store. Confirm by pressing OK.
4
n By default, a name is given to your Espresso recipe. You can decide to
keep it (by pressing OK) or modify it (by pressing Change).
n If you modify it, the indication Espresso will be present in the name and
you can add a suffix using the keypad. Then press OK to confirm the new name.
5
n Your recipe is then saved with its new name and appears in the screen
showing the recipes of the user profile in question.
CREATING A RECIPE
n Example of espresso
NB: At any time, you can:
n Create a new recipe by pressing the + button
- You must then repeat the same operations of choosing the recipe settings.
n Modify the recipe characteristics by pressing the (Change) button.
- Choose the recipe you want to change
- Modify the recipe settings
- Modify the recipe name
- Confirm by pressing OK.
n Delete one or more recipe(s) by pressing the (Delete) button.
- Choose the recipe(s) you want to delete
- Confirm by pressing the OK button.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page34
DEFRNLIT
EN
35
ENGLISH
SETTINGS
n The “Settings” menu allows you to make changes to optimise your ease of use and suit your
preferences. Below are the main settings available. Just follow the instructions on the different screens in the display.
6
1
n Language
n Choose the language in which your screens will be displayed.
n Press OK to confirm.
2
n Brightness
n Increase or decrease the brightness of the screen of your appliance.
n Press OK to confirm.
3
n Date and time
n Set the date and time of your machine if necessary.
n Press OK to confirm.
n You can access the “Settings” menu from the main menu by
pressing the “Settings” tab.
n You can modify: the language, brightness, date and time, volume unit; but
also water hardness, coffee temperature and auto-off mode.
n To go back to the recipe sequence, press the small cup at the top
right-hand of the screen.
n To quit the Settings menu: press the Settings tab.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page35
KRUPS SERIE EA9000
36
4
n Auto-off
n Decide how long your appliance must remain turned on before turning off
automatically; between 15 minutes and two hours, in steps of 15 minutes.
n Press OK to confirm.
5
n Volume unit
n Select the volume unit you want displayed.
n Press OK to confirm.
6
n Water hardness
n Save the hardness of the water you are using to optimise the frequency of
your maintenance programmes.
n Press OK to confirm.
7
n Coffee temperature
n Choose the temperature level of your coffee.
n Press OK to confirm.
8
n To quit the settings menu
n Go back to the Settings menu by pressing the symbol . Then press the Settings tab to return to the
main menu.
n Press OK to confirm.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page36
DEFRNLIT
EN
37
ENGLISH
INFO
n The “Info” menu provides information about your use and about certain stages in the life of your
machine. It also informs you about the maintenance of your machine. Below are the main details available. Just follow the instructions on the various screens in the display.
7
1
n Cycles
n Gives you information about your drinking habits, in terms of coffee
or milk-based drinks as well as the number of times you have prepared them via the “Ground coffee” or “Favourites” menus.
n Press OK to confirm.
2
n Helpline
n Here you can find the helpline number for your country.
n You can change it by pressing “Change”.
n Press OK to confirm.
3
n Water filter
n Tells you, where relevant, the last time the water filter was replaced
and next time the filter must be replaced.
n You can also start a filter replacement procedure.
n Press OK to confirm.
n You can access the “Info” menu from the main menu by pressing
the “Info” tab.
n You can then view all the information available on time limits in terms of:
rinsing, descaling, replacing the filter, cleaning the nozzles, cleaning the coffee circuit, changing the cleaning liquid and preparation cycles.
n To quit the Info menu: press the Info tab.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page37
KRUPS SERIE EA9000
38
4
n Rinsing
n Gives you the number of rinsing cycles already carried out by the machine.
n Press OK to confirm.
5
n Coffee circuit cleaning
n Tells you the number of cycles carried out since the last cleaning, and the
number of cycles that are possible before the next cleaning.
n You can also start a coffee circuit cleaning programme.
n Press OK to confirm.
6
n Descaling
n Tells you the number of cycles carried out since the last descaling, and
the number of cycles that are possible before the next descaling.
n Press OK to confirm.
7
n Automatic cleaning of the steam nozzle
n Tells you the number of cycles carried out since the last automatic cleaning
of the steam nozzle and the number of cycles possible before the next automatic cleaning of the steam nozzle.
n You can also start an automatic steam nozzle cleaning programme.
n Press OK to confirm.
8
n Manual cleaning of the steam nozzle
n Tells you the number of cycles carried out since the last manual cleaning
of the steam nozzle and the number of cycles possible before the next manual cleaning of the steam nozzle.
n You can also start a manual steam nozzle cleaning programme.
n Press OK to confirm.
9
n Cleaning liquid
n Tells you the number of cycles carried out since the last replacement of
the cleaning liquid bottle and the number of cycles possible before the next replacement of the cleaning liquid bottle.
n You can also start a cleaning liquid bottle replacement programme.
n Press OK to confirm.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page38
DEFRNLIT
EN
39
ENGLISH
MAINTENANCE AND CLEANING
8.1 Regular maintenance
n Filling the water tank – see visuals p. 13
The tank is fitted with a sensor to detect the presence of the tank and the water level.
n To remove it, open the right door (14), slightly lift the water tank up and pull it out.
n Remove the lid to fill it with water (you can also leave the lid on if you are filling it through the hole
on the lid using a suitable recipient).
n To put the tank back in place: slide the tank right into its housing (until you feel some resistance).
n Emptying and cleaning the used coffee collector – see visuals p. 13
n Open the left door (15). Remove the used coffee collector (5). Empty and clean it before putting it
back in place.
n Emptying and cleaning the drip tray – see visuals p. 13
Your machine has two drip trays (6 and 7).
n The small drip tray collects drips from the coffee nozzles but can be removed for preparations with
tall glasses.
n The large drip tray collects used water and overflows from the small drip tray.
n The large drip tray is fitted with an overflow detection sensor.
n When it needs to be emptied, the request will be made on the screen.
n The cover of this tray is necessary to avoid excessive condensation and water spills.
8
n The machine prompts you to fill the tank with water although there is water in it: Caution: The
machine includes a mechanism that manages the water level required for the requested recipe. It is therefore normal that the water level is not always the same in the tank when there is a request to fill it.
n The machine does not detect my tank: Please check whether the tank has been inserted fully (until
you feel resistance).
Caution: Only put water in the tank!
!
Caution: Do not wash it in the dishwasher.
!
Caution: The cover and the grid can fall when you empty the drip tray.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page39
n If the tray is dirty, clean it under running water. If the metal contacts are dirty, clean by scrubbing them
under water. Wipe the metal contacts dry before putting them back in the machine.
n The drip trays will be separated when you empty them. Avoid spilling water as much as possible on the
metal contacts located at the end of the drip tray.
n If the machine asks you to empty the drip tray when it is empty, check whether the metal contacts at the
back of the drip tray are clean and thoroughly dry.
n Filling the coffee bean container – see visuals p. 12
The coffee bean container (22) is fitted with a sensor to detect the presence of beans.
n To fill the container, open the lid by slightly lifting it on the sides. Then it opens by itself.
n Put coffee beans into the container, which has a capacity of about 250 g.
n Close the lid.
KRUPS SERIE EA9000
40
n The machine prompts you to fill the bean container although there are beans in it: Some types of coffee
can interfere with optical sensors; you must shake the beans with your hand to make the function operational once again.
n The machine detects beans, but the coffee dispensed is very/too light: Some beans (especially those
that are too large or too greasy) do not easily go into the grinder. Use your hand to ease them into the grinder and/or change the type of coffee beans.
n The machine does not detect the absence of coffee beans: Check that a bean is not obstructing the optical
sensors. Otherwise, the function is not operational.
Caution: Never put ground coffee or water into the coffee bean container.
Ensure that no foreign bodies (e.g. small stones, hard wood) can get into the coffee bean container as they could damage the grinder (not covered by the guarantee).
!
Danger: Any contact of the conductive parts of the appliance with humidity or water may lead to fatal injuries
due to the presence of electricity!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page40
DEFRNLIT
EN
41
ENGLISH
8.2 Maintenance menu
n Press the Maintenance tab to access the Maintenance menu.
n Automatic cleaning of the steam nozzle
The machine can automatically clean the nozzle on your request, or automatically. Automatic cleaning is required depending on the number and type of milk recipes prepared. Below are the main steps in this automatic cleaning when requested by the user. Otherwise, just follow the instructions on the screens displayed by the machine.
1
n You can access the “Maintenance” menu from the main menu
by pressing the “Maintenance” tab.
n Press the “Automatic cleaning of the nozzle” button on the touch
screen.
n NB: The cleaning cycle must not be interrupted.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n If necessary, the machine will ask you to replace the cleaning liquid bottle.
4
n The cleaning cycle is finished.
3
n Press Start.
(if you do not do so immediately, you will return to the initial screen).
n The machine starts by rinsing the nozzle.
n The nozzle comes out of its cleaning container.
n The cleaning liquid is introduced automatically into the nozzle
cleaning container.
n The machine mixes water with the cleaning liquid.
n Then, the machine cleans the nozzle by soaking it in this mixture.
n The nozzle is then rinsed twice with water.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page41
KRUPS SERIE EA9000
42
n Manual cleaning of the steam nozzle
The machine can ask you to clean the nozzle manually or can clean it on your request. Manual cleaning is requested depending on the number and type of milk recipes prepared.
Below are the main steps in this manual cleaning of the nozzle when requested by the user. Otherwise, just follow the instructions on the screens displayed by the machine.
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence shown
in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Manual cleaning of the nozzle” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n The nozzle comes out of the cleaning container.
n You can clean all of the parts of the machine located behind the coffee
nozzle.
3
n Remove the two drip trays.
n Empty and clean them.
n The nozzle moves forward and slightly downward.
4
n Unscrew the nozzle tip (10) with the steam nozzle (9).
n Do not remove the tip seals, as this may damage them and affect the
frothing performance.
Caution: Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page42
DEFRNLIT
EN
43
ENGLISH
5
n Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two parts to clean them properly.
n Do not wash the tip in the dishwasher.
n Caution: clean the tip properly.
n Press the “OK” button.
6
n The steam tube moves down.
n You can thus clean it properly with a damp cloth (you can use a little
washing-up liquid, but rinse it thoroughly). The steam tube cannot be dismantled.
n Press the “OK” button. The steam tube moves up so that the nozzle
tip and the nozzle can be refitted.
7
n Re-screw the nozzle with the tip onto the steam tube.
n Press the “OK” button.
n The steam nozzle assembly moves up and stops above the cleaning
container.
8
n Cleaning the steam nozzle cleaning container (11).
n Press YES to the question: “Do you want to clean your cleaning
container?” if you want to clean it.
n Press the top of the container to remove it. Clean it under running
water.
n To put the container back, first position the lower part and then press
the upper part: you should hear a “click”.
n Press the “OK” button.
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page43
KRUPS SERIE EA9000
44
n Cleaning the steam nozzle cleaning container
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n To clean the nozzle and its container, you must follow the sequence shown
in the Maintenance tab.
n Failure to follow this sequence may damage the system.
n Press the “Cleaning container” button on the touch screen.
2
n Then follow the instructions on the screen, referring to the visuals in step
9 in the manual cleaning of the nozzle until you see the screen on the right.
n This cleaning cycle is finished.
9
n Replace the two drip trays (see visuals p. 13).
n The manual steam nozzle cleaning cycle is finished.
n Press OK to confirm and quit.
Caution: The manual cleaning of the nozzle and the cleaning container must be carried out in this
sequence: If not, you risk damage to the steam nozzle assembly, malfunction or breakage.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page44
DEFRNLIT
EN
45
ENGLISH
n Cleaning the ground coffee funnel
2
n Open the ground coffee funnel lid.
n Remove the ground coffee funnel.
1
n You can access the “Maintenance” menu from the main menu
by pressing the “Maintenance” tab.
n You cannot clean the ground coffee funnel without going through the
Maintenance tab. Always follow the instructions given on the screen.
n Press the “Cleaning the ground coffee funnel” button on the touch
screen.
n The ground coffee funnel lid is then unlocked.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
3
n Clean the ground coffee funnel.
n You can clean it with the brush or under running water. Caution: Dry
it thoroughly. It must be dry when you replace it.
4
n Replace the ground coffee funnel.
n Close the funnel lid. The funnel lid is then locked. If the machine asks
you whether you have taken out the funnel: press the OK button on the touch screen.
5
n Cleaning of ground coffee funnel completed.
h
h
Caution: Do not force the funnel open; it is always locked when the recipes are prepared.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page45
KRUPS SERIE EA9000
46
n Changing the cleaning liquid bottle
The machine can request the replacement of the cleaning liquid bottle, but you can also make this request.
1
n You can access the “Maintenance” menu from the main menu by
pressing the “Maintenance” tab.
n You must always use this programme so that the counters can be updated.
n Press the “Changing the cleaning liquid bottle” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n Open the left door (15).
n Pull out the drawer (19) of the cleaning liquid bottle.
n Unscrew the bottle to be changed. Use only Krups bottles. The use of other
products that are incompatible or not approved by Krups will invalidate the guarantee.
3
n Remove the cap of the new cleaning liquid bottle and screw it to the
drawer (19).
n Screw in the new bottle. Place the liquid bottle in the axis of the
drawer.
n Screw at least two turns.
4
n Push the drawer to the back.
n Close the door.
n Press OK.
n This programme is finished.
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page46
DEFRNLIT
EN
47
ENGLISH
8.3 Automatic cleaning programmes
n Automatic cleaning programme of the coffee circuit
A message on the screen will indicate when a cleaning programme needs to be run for the appliance. Cleaning is required around every 360 preparations.
To run this cleaning programme, you will need a recipient with a capacity of at least 0.6 litres which can fit underneath the coffee nozzle, and a KRUPS cleaning tablet (two of which are supplied in the Welcome Pack).
The automatic cleaning programme has three phases: one cleaning cycle and two rinsing cycles. It lasts around 20 minutes.
Protect your worktop from any splashes during the cleaning and descaling cycles, especially if it is made of marble, stone or wood.
Here are the main steps in this programme. Otherwise, just follow the instructions on the screens displayed by the machine.
Caution: To respect the guarantee conditions, the cleaning cycle must be carried out when the
appliance requests you not to postpone it further.
!
Caution: You are not obliged to carry out the cleaning programme immediately the appliance
requests it, but it must be carried out reasonably soon. Only use KRUPS cleaning tablets otherwise the guarantee will not cover any material damage caused by the use of other brands of tablets. Cleaning tablets are available from your KRUPS After-Sales Service Centre.
!
1
n You can access the “Maintenance” menu from the main menu
by pressing the “Maintenance” tab.
n Press the “Cleaning coffee circuit” button on the touch screen.
n To quit the “Maintenance” menu, press the “Maintenance” tab.
2
n Empty the used coffee collector, remove and empty the drip trays, and fill the water tank.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page47
KRUPS SERIE EA9000
48
3
n Open the ground coffee funnel lid.
n Remove the ground coffee funnel.
n Clean the ground coffee funnel. You can clean it with the brush or under
running water. Caution: Dry it thoroughly. It must be dry when you replace it.
4
n Put the funnel back without closing the lid.
5
n Put the cleaning table into the funnel.
n Close the funnel lid. You must run this programme right to the end. The
funnel is locked.
n Press the OK button on the screen.
6
n Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
n Follow the instructions on the screen. Once the cleaning cycle is complete,
empty the recipient and put it back under the coffee nozzles and fill the tank again with water. After the second rinsing, empty the recipient and the drip trays.
7
n The cleaning of the coffee circuit is finished.
Caution: Make sure that the cleaning programme is completely finished.
If the cleaning programme is interrupted by a power cut or accidental unplugging of the ma­chine, it must be started again from the beginning. A new cleaning tablet will be required in this case. The programme must be started again completely in order to rinse the water cir­cuit and eliminate any traces of harmful cleaning products.
!
h
h
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page48
DEFRNLIT
EN
49
ENGLISH
n Automatic descaling programme of the steam circuit
A message on the screen will indicate when a descaling programme needs to be run for the appliance. The frequency of this programme depends on the quality of the water used (the harder the water, the more often the appliance has to be descaled) and on whether a Claris Aqua Filter System filter is used or not. To run the descaling programme, you will need a recipient with a capacity of at least 0.6 litres that may be placed underneath the coffee nozzles and the steam nozzle, and a KRUPS descaling sachet (F 054 – a 40 g sachet is supplied in the Welcome Pack). The automatic descaling programme has three phases: one descaling cycle and two rinsing cycles. The programme lasts approximately 22 minutes.
Caution: To respect the guarantee conditions, the cleaning cycle must be carried out when the
appliance requests you not to postpone it further.
!
Caution: You are not obliged to carry out the descaling programme immediately the appliance
requests it, but it must be carried out reasonably soon. Only use KRUPS descaler sachets supplied in the Welcome Pack; otherwise the guarantee will not cover any material damage caused by the use of other brands of sachets. Descaler sachets are available from your KRUPS After-Sales Service Centre.
!
1
n When the machine requests descaling, confirm to start the
programme.
2
n Empty the used coffee collector, take out and empty the drip trays.
3
n Remove the water tank.
n If you use the Krups Claris Aqua Filter System filter cartridge, remove
it before the descaling operation.
n Empty the water tank and then fill it with water up to the CALC mark.
n Pour the descaler into the water tank and put it back.
n Use a large spoon with a long handle to mix the water in the tank or
remove the water tank and carefully shake it from left to right until the descaler is fully dissolved.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:12 Page49
KRUPS SERIE EA9000
50
4
n Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
n The descaling phase will start.
5
n When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
n The first rinsing will start.
6
n End of the first rinsing: Empty your recipient and replace it.
7
n End of the second rinsing and of the steam circuit descaling phase.
n The nozzle returns to its cleaning container.
n Refit the Claris Aqua Filter System filter, if necessary.
n Empty your recipient and fill the water tank.
Caution: During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page50
DEFRNLIT
EN
51
ENGLISH
TROUBLESHOOTING
n If your machine is not operating correctly, try to resolve it by referring to this troubleshooting guide.
If the problem persists in spite of this, contact our helpline (see section 3.2).
9
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
The machine displays a failure, the software hangs or your machine has a malfunction.
n Software problem.
n Turn off and unplug the machine.
Remove the filter cartridge. Wait for 20 seconds and restart the machine.
n If the failure persists, note down
the message on the screen and call the KRUPS customer service.
The appliance does not switch on when the ON/OFF button is pressed.
n Power failure or blown fuse. n The mains plug is not pushed into
the mains socket correctly or into the machine or the mains socket is faulty.
n The appliance is faulty.
n Check the fuses of your electrical
installation.
n Check that the plug is correctly
inserted into the socket or have the socket repaired.
n Have the appliance checked by a
qualified technician.
You used pre-ground coffee and the machine does not make coffee.
n You have poured too much
pre-ground coffee or the pre-ground coffee is too fine.
n Use a mixture for espresso coffee
machines.
The espresso or coffee is not hot enough.
n The temperature of the coffee is
not set high enough.
n The coffee cup is cold.
n Check the coffee temperature in
the “Settings” menu.
n Programme your recipe using the
“Favourites” function by increasing the temperature.
n Warm the cup by rinsing it with
hot water before starting the preparation.
The coffee is too lightly coloured or too weak.
n There is not enough coffee in the
coffee bean container.
n Too much coffee is prepared.
n Check that coffee is present in
the container and that nothing is obstructing the sensor (coffee bean blocking in the front, etc.).
n Reduce the quantity of water in
the coffee.
The coffee dispenses too slowly.
n The filter cartridge is clogged. n The machine may need
cleaning/descaling.
n Start a cleaning of the machine. n Remove/replace the filter
cartridge.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page51
KRUPS SERIE EA9000
52
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
The coffee is not creamy.
n The machine may need to run a
cleaning cycle.
n The coffee is not fresh enough.
n Start a cleaning of the machine
(see section 8).
n Try using fresher coffee beans /
grounds.
The coffee grinder makes a strange noise.
n Foreign bodies are inside the
grinder.
n Check whether you can extract the
foreign body using a tool. Unplug the machine before you do this.
n Contact the KRUPS Customer
Service.
No steam comes out of the nozzle.
n The nozzle or the nozzle support is
blocked.
n The water used is not suitable for
making steam.
n Wash the steam nozzle manually
(see section 8); clean and unblock each part.
n Check that the steam nozzle is
screwed on properly.
n Empty the tank and remove the
Claris cartridge temporarily.
n Fill the water tank with mineral
water with high calcium content (>100 mg/l) and carry out steam cycles (5 to 10) consecutively into a recipient until you get a continuous jet of steam.
There is not enough milk froth.
n The steam does not come out
properly.
n The milk is not cold enough.
n See paragraph above. n We recommend that you use cold
pasteurised or UHT milk, freshly opened.
The milk froth is not fine enough.
n The steam does not come out
properly.
n The milk is not suitable.
n Check that the milk is fresh and
cold.
n Check that there is enough milk in
the glass.
n Wash the steam nozzle manually
(see section 8); clean and unblock each part.
n Check that the steam nozzle is
screwed on properly.
n We recommend that you use cold
pasteurised or UHT milk, freshly opened.
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page52
DEFRNLIT
EN
53
ENGLISH
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
Nozzle cleaning does not take place properly.
n No cleaning liquid. n The milk used is not suitable.
n Check that your preparation does
not boil while heating or frothing. If it does, reduce the heating and/or frothing time.
n Check that the cleaning liquid
bottle is not empty.
n Carry out a manual cleaning. n We recommend that you use cold
milk.
The water tank has been filled, but the warning message is still displayed on the screen.
n The water tank is not fitted
properly.
n The float at the bottom of the tank
does not move freely.
n The water tank is scaled up.
n Check and unblock the float if
necessary.
n Reinstall the water tank properly
until you feel some resistance.
n Rinse the water tank under
running water and descale, if necessary.
The drip tray has been emptied, but the warning message is still displayed on the screen.
n The metal contacts are dirty.
n Clean and wipe the metal
contacts at the back of the drip tray.
The used coffee collector has been emptied, but the warning message is still displayed on the screen.
n The used coffee collector is not
fitted properly.
n The used coffee collector has
been fitted back too quickly.
n Refit the used coffee collector. n Wait for at least 8 seconds before
refitting the empty collector.
A power failure occurs during the cycle.
n The appliance is automatically
reinitialised when it is switched back on.
There is water underneath the appliance.
n The drip tray is not correctly fitted
or is overflowing.
n Check that the drip tray has been
fitted correctly and empty it if required.
Danger: Only a qualified technician is authorised to carry out repairs on the power cord and the
230 V electrical system. Failure to respect this exposes you to fatal injuries due to the presence of electricity! Do not use an appliance that is visibly damaged!
Note: Programming problems are often resolved by unplugging the appliance for about one minute and
then plugging it in again.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page53
KRUPS SERIE EA9000
54
TECHNICAL DATA
10
Voltage: 220-240V / 50 Hz Weight EA9 metal: 11.5 kg
Power: In operation: 1450 W Used coffee collector
Energy consumption: On standby: 0 W Small drip tray
Water tank: 1.7 l Large drip tray
Coffee bean container 280 g Cable length
Pump pressure: 15 bar
Ground coffee funnel capacity
1 spoon or 6 grams
Dimensions (Height*Width*Depth):
38.5 * 29.5 * 39.5 cm
TRANSPORT
n Keep the original packaging to transport the appliance.
Before transporting or tilting the appliance, empty the used coffee collector, the bean container, the
water tank and the drip trays and remove the cleaning liquid bottle to avoid spilling water or the cleaning or descaling product.
11
DISPOSAL OF WASTE
n The symbol on the appliance or its packaging indicates that this product may not be processed as
household waste. Therefore it must be taken to a waste collection centre for the recycling of electrical and electronic equipment. By sorting waste and disposing of old equipment correctly, you are helping to preserve the natural resources and preventing harmful consequences for the environment and people’s health. To obtain more information on waste collection sites, please contact your retailer.
12
Caution: If the appliance is dropped without its packaging during transport, it is preferable to take it to an
After-Sales Service centre to have it checked and avoid any risk of fire or electrical danger.
!
Note: Your appliance contains many materials that may be recycled or recovered.
!
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page54
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page55
IFU_EN_KR_COFFEEMAKER_BARISTA_0828479_Mise en page 1 15/06/11 10:13 Page56
Loading...