The home theater entertainment experience is a growing trend, and larger TVs are popular
purchases. However, TVs are not always supported on the proper stands or installed
according to the manufacturer’s recommendations. We and the consumer electronics
industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or
carts may fall over and cause injury.
Tune into safety
•One size of TV stand does not fit all. Use only a TV stand
rated for the weight of your TV.
•Carefully read and understand all enclosed instructions
for proper use of this product.
•Don’t let children climb on or play with entertainment
system furniture and TVs.
•Don’t place TVs on furniture that can easily be used as
steps, such as a crate or chest of drawers.
•Remember that children can become excited while
watching a program, especially on a “larger-than-life” TV.
Make sure that you place or install the TV where it cannot
be pushed, pulled over, or knocked down.
•Make sure that you route all cords and cables so that they
cannot be pulled or grabbed by curious children.
CHILD SAFETY
your flat panel display
safety tips in mind
Wall mounting
If you decide to wall mount your TV, always remember:
•One size of wall mount does not fit all. Use only a wall mount rated for the weight of
your TV and that has been recommended by this TV manufacturer, listed in this
manual, or otherwise listed by an independent laboratory as suitable for your TV.
•Follow all instructions supplied by the TV and wall mount manufacturers.
•If you have any doubts about your ability to safely wall mount your TV, get help from a
professional installer.
•Make sure that the wall where you are mounting the TV is
appropriate. Some wall mounts are not designed to be
mounted to walls backed with steel studs or cinder blocks. If
you are unsure, ask a professional installer.
•TVs can be heavy. At least two people are required for safe wall mount installation.
www.insigniaproducts.com
1
NS-55E560A11
Important safety
instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
This symbol indicates that there are
important operating and maintenance
instructions in the literature
accompanying your TV.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with a cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the
cart/apparatus combination to avoid injury from
tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
S3125A
15 The wall plug is the disconnecting device. The
plug must remain readily operable.
16 An apparatus with three-prong, grounding-type
plug is a Class I apparatus which needs to be
grounded to prevent possible electric shock.
Make sure that you connect the Class I
apparatus to a grounding-type, three-prong
outlet.
17 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
18 The apparatus should not be exposed to
dripping or splashing, and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
Warnings
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
Lightning
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
Power lines
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
Replacement parts
When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
Safety check
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
2
www.insigniaproducts.com
Power source
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult
an electrician or your local power company.
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged
or frayed.
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls that are covered by the operating
instructions because incorrect adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore your TV to its normal
operation.
• If your TV has been dropped or damaged in any
way.
• When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
Condensation
Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To
prevent this, let the TV stand in its new
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV is exposed to the breeze from an air
conditioner. In such cases, change the location of
the TV.
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV.
End of life directives
Your TV contains tin-lead solder and a fluorescent
lamp containing a small amount of mercury.
Disposal of these materials may be regulated for
environmental reasons. Your TV also contains
material that can be recycled and reused. For
disposal or recycling information, contact your local
authorities or the Electronic Industries Alliance at
www.eia.org to find a recycler in your area.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
1
2
7
Antenna lead-in wire
1
Grounding clamp
2
Antenna discharge unit
3
Grounding conductors
4
5
Ground clamps
Power service grounding electrode system
6
7
Electric service equipment
3
4
5
6
www.insigniaproducts.com
3
NS-55E560A11 Insignia 55" LED-LCD TV, 1080p
Insignia 55" LED-LCD TV, 1080p
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-55E560A11 represents
the state of the art in LED-LCD TV design and is
designed for reliable and trouble-free performance.
Features
SR S TruSurround HD:
At Insignia, providing you with superior audio
quality is just as important as exceptional picture
quality. That's why we added SRS TruSurround HD,
which provides you with a theater-like
surround-sound experience, with the clearer dialog
and the enhanced bass sounds that movie viewers
and gamers crave.
Insignia Motion 120Hz:
With a 120 Hz screen refresh rate twice the rate of a
60 Hz screen, a screen with 1,080 lines of resolution
(up from 720 lines in the last generation of HDTVs),
and special motion-detection technology, you will
be experiencing a picture with clearer detail and
brightness, smoother transitions, and reduced
motion blurring, particularly when watching
fast-motion sports and action scenes.
Installing a wall-mount bracket
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, remove the four screws
that secure the stand to your TV, then remove
the stand.
15.75 inches (400 mm)
15.75 inches (400 mm)
Installing the stand or
wall-mount bracket
Installing the stand
To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Attach the stand to your TV.
M6 screws
Stand
3 Attach the wall-mount bracket to the back of
your TV using four M8 × 25 screws and four
spacers (provided).
TV components
Accessories
• Remote control
• Batteries (2 AAA)
•Power cord
• Component video cable
•Audio cable
• TV stand and screws
• Quick Setup Guide
3 Secure the stand to your TV using the provided
four screws.
4
www.insigniaproducts.com
Insignia 55" LED-LCD TV, 1080p
FrontSide
Note
To turn on your TV using the (power) button on
your TV, press twice. The presses must be within
five to seven seconds of each other. The first time you
press , the button labels appear on the screen. The
second time you press , your T V turns on.
# ItemDescription
1
Remote control sensor Receives signals from the remote control. Do not block.
Turns off when your TV is turned on.
2
Power indic ator
3
MENUPress to open the on-screen menu.
4
INPUTPress to select the video input source.
5
VOLPress to increase the volume.
6
VOL
7
CH
8
CH
9
(power)
Lights red when your TV is in standby mode.
Turns off when the power cord is unplugged.
Press to decrease the volume.
Press to go to the next channel in the channel list.
Press to go to the previous channel in the channel list.
Press to turn on your TV. Press again to put your TV in
standby mode.
When your TV is in standby mode, power still flows
through it. To completely disconnect power, unplug
the power cord.
# ItemDescription
Connect headphones to this jack. For more
1
HEADPHONE
2
ANT/CABLE IN
3
AUDIO OUT L/R OUT
PC VGA and PC/DVI
4
AUDIO IN
5
HDMI1/HDMI2/HDMI3
information, see “Connecting headphones” on
page 12.
Connect an antenna, cable TV, or satellite TV box to
this jack. For more information, see “Connecting an
antenna or cable TV without a cable box” on page 9.
Connect an analog sound system to these jacks to send
the TV audio through the sound system. For more
information, see “Connecting an analog (stereo)
sound system” on page 13.
Connect the video for a computer to the PC VGA jack.
Connect the audio for a computer or DVI device to the
PC/DVI AUDIO IN jack. For more information, see
“Connecting a computer” on page 12.
Connect HDMI devices to these jacks. An HDMI cable
carries both video and sound. You do not need to make
an audio connection for an HDMI device.
For more information, see “Connecting an HDMI
device” on page 10.
www.insigniaproducts.com
5
NS-55E560A11 Insignia 55" LED-LCD TV, 1080p
BackRemote control
# ItemDescription
1
COMP Y/Pb/Pr
2
AV V IDEO
3
AV/COMP L/R audio
4
DIGITAL AUDIO OUT
5
SERVICEFor service only.
6
HDMI4Connect an HDMI device to this jack.
Connect the video for a component video device to
these jacks. For more information, see “Connecting a
component video device” on page 11.
Connect the video for a composite video device to this
jack. For more information, see “Connecting a
camcorder or game console” on page 11.
Connect the audio for a composite video device
connected to the AV VIDEO jack or for a component
video device connected to the COMP Y/Pb/Pr jacks. For
more information, see “Connecting a camcorder or
game console” on page 11 or “Connecting a
component video device” on page 11.
Connect a digital sound system to this jack to send the
TV audio through the sound system. For more
information, see “Connecting a digital sound system”
on page 13.
POWER
MUTE
1
4
789
VOL+
PICTURE
2
56
RECALL
0
ENTER
VOL-
SLEEP
EN-21669I
AUDI O
3
CH
# ButtonDescription
Press to turn on your TV. Press again to put your TV in
standby mode.
1
POWER
2
PICTURE
3
MUTE
4
Numbers
5
6
7
ENTER
8
VOL+Press to increase the volume.
9
VOL–Press to decrease the volume.
10
CCD
When your TV is in standby mode, power still flows
through it. To completely disconnect power, unplug
the power cord.
Press to select the picture mode. For more
information, see “Adjusting the TV picture” on
page 16.
Press to turn off the sound. Press again to turn the
sound back on.
Press to enter channel numbers or the parental control
password.
Press to select a digital sub-channel. For more
information, see “Selecting a channel” on page 14.
Press to navigate in on-screen menus. For more
information, see “Navigating the menus” on page15.
Press to open a sub-menu or to confirm selections in
the on-screen menus. For more inf ormation, see
“Navigating the menus” on page 15.
Press to turn closed captioning on or off. For more
information, see “Using closed captioning” on
page 25.
INPUT
ZOOM
GUIDE
INFO
EXIT
MENU
+
CH
-
TIMECCD
6
www.insigniaproducts.com
Insignia 55" LED-LCD TV, 1080p
# ButtonDescription
Press to select the audio mode for an analog channel.
11
MTS/SAP
12
Remote indicatorLights when you press a button on the remote control.
13
INPUT
14
AUDIO
15
ZOOM
16
GUIDE
17
INFO
18
EXITPress to close the on-screen menu.
19
MENUPress to open the on-screen menu.
20
RECALLPress to go to the previous channel.
21
CH +
22
CH –
23
TIME
24
SLEEP
(red) (green) (yellow)
25
(blue)
Press to select the audio track for a digital channel if
more than one audio track is available.
For more information, see “Selecti ng the audio mode”
on page 17.
Press to open the Input Source list. For more
information, see “Selecting t he video input source” on
page 14.
Press to select the sound mode. For more information,
see “Adjusting sound settings” on page 16.
Press to select the aspect ratio. For more information,
see “Adjusting the TV picture” on page 16.
Press to open the program guide for digital channels
(if available). For more information, see “Viewing
channel information” on page 14.
Press to display the channel banner. For more
information, see “Viewing channel information” on
page 14.
Press to go to the next channel in the channel list. For
more information, see “Selecting a channel” on
page 14.
Press to go to the previous channel in the channel list.
For more information, see “Selecting a channel” on
page 14.
Press to display the current time.
Press to set the sleep timer. For more information, see
“Setting the sleep timer” on page 27.
These buttons work with the elec tronic program guide
(EPG). After you press GUIDE, follow the on-screen
instructions for using these buttons.
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries align with the + and –
symbols in the battery compartment.
3 Replace the cover.
Warnings
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Using the remote control
Installing remote control batteries
To install the remote control batteries:
1 While pressing the release tab on the battery
compartment cover on the back of the remote,
lift the cover off the remote.
www.insigniaproducts.com
7
NS-55E560A11 Insignia 55" LED-LCD TV, 1080p
Aiming the remote control
To aim the remote control:
• Point the remote control toward the remote
control sensor on the front of your TV.
19.68 ft. (6 m)
26.25 ft. (8 m)
19.68 ft. (6 m)
19.68 ft. (6 m)
Notes
• Do not expose the remote control to shock.
• Do not expose the remote control to liquids and
do not use the remote control in an area with
high humidity.
• Do not place the remote control in areas of high
heat or direct sunlight. The heat may warp the
battery case.
• The remote control may not work correctly if
sunlight or bright light is shining on the remote
control sensor. To correct this problem, move
your TV or use the remote control closer to the
remote control sensor.
19.68 ft. (6 m)
26.25 ft. (8 m)
Programming your existing universal remote
control
You can operate your Insignia TV with a new or
existing universal remote control.
To program a universal remote control:
1 See the table below for common codes. If you
have problems programming your remote or
need a different remote control code, visit
www.insigniaproducts.com for the latest
remote control code information.
Insignia TV codes for universal remote controls
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makes and models
Philips PHDVD5,
PH5DSS,
PMDVR8, PDVR8
11513504648043
Comcast
M1057
04637200463009110463
Codes for other remote controls are available
online at: www.insigniaproducts.com
RCA
RCU807
One for All
URC-6690
Sony
RM-VL600
Set-top box makes and models
Dish Network
VIP508, VIP622
Tips
• The brand name is often visible on the front of
the universal remote control, and the model
number is often visible on the back.
• If your universal remote control isn’t listed on
the chart, refer to your universal remote
control’s instructions and try codes for the
brands Orion, Emerson, Memorex, Sansui,
Sylvania, or Zenith. You may need to try several
codes before finding a match.
Motorola
DRC800
TIVO
Series 3, HD
DirectTV
RC23
2 Follow your universal remote control’s
instructions to enter the TV code you found in
Step 1.
Tips
• If your universal remote control has a code
search feature, run a code search to identify a
code that matches your T V. See your universal
remote control’s instructions for details.
• If your universal remote control has a “Learn”
feature, you can manually program it using the
Insignia TV remote to “teach” the commands
one at a time. See your universal remote
control’s instructions for details.
3 If all else fails, you must use a different universal
remote control that can operate both your
set-top box and your TV. Four such remotes are
listed on the chart, but many other compatible
models are available in the market.
For more help, go to insigniaproducts.com or
call technical support for your universal remote
control or set-top box manufacturer, or call the
Insignia Customer Care Center. For US and
Canada markets, call 1-877-467-4289. For
Mexico markets, call 01 800-926-3000.
8
www.insigniaproducts.com
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.