Kodak P720 User Manual

Kodak EasyShare

P720 digital frame

Extended user guide

www.kodak.com

For help with your picture frame, www.kodak.com/go/digitalframesupport

Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2008

All screen images are simulated.

Kodak and EasyShare are trademarks of Eastman Kodak Company.

P/N 4F8172_en

Front View

1

2

Back/Side View

1

1 LCD screen
2 Touch border (tap/slide)
3 Touch border (tap only)

3

4 Raised guide

4

To use the touch border, see page 3.

4

5

6

Product features

2

3

1 Power button 5 Reset button

2 Stand attachment slot 6 USB connector (to camera/USB device)

3 Frame stand (see page 1) 7 Memory card slot - SD/SDHC

4 Memory card slot - SD/SDHC, MS, xD,

MMC (see page 5)

www.kodak.com/go/support

8 Wall mounting holes (see page 7)

7

8

i

Table of contents 1

1 Getting started ......................................................................................1

Setting up your frame.................................................................................... 1

Turning on your frame................................................................................... 2

Using your frame’s touch border ....................................................................3

Setting your language ...................................................................................4

Enjoying your pictures immediately! .............................................................. 4

Inserting a memory card ................................................................................ 5

Connecting a digital camera or other USB device ........................................... 5

Turning off your frame................................................................................... 6

Changing your frame orientation ................................................................... 6

Mounting your frame on the wall .................................................................. 7

2 Viewing pictures ....................................................................................8

Accessing your pictures ................................................................................. 8

Running a slide show .................................................................................... 9

Viewing thumbnails (multi-up)....................................................................... 9

Viewing a single picture .............................................................................. 10

Viewing pictures by filename ....................................................................... 10

Copying pictures .........................................................................................11

Copying from your computer ....................................................................... 12

Deleting pictures ......................................................................................... 15

Selecting multiple pictures ........................................................................... 15

3 Doing more .........................................................................................17

Changing frame settings ............................................................................. 17

Settings menus ........................................................................................... 17

Setting the clock and timer .......................................................................... 19

Upgrading your firmware............................................................................. 20

Installing the software................................................................................. 21

Customizing your frame .............................................................................. 22

Maintaining your frame and mattes ............................................................. 22

ii www.kodak.com/go/support

Table of contents

Learning more about your frame.................................................................. 22

4 Troubleshooting and support ..............................................................23

Picture frame problems ............................................................................... 23

Screen messages ......................................................................................... 25

5 Appendix .............................................................................................27

Digital frame specifications..........................................................................27

Important safety instructions .......................................................................28

Upgrading your software and firmware........................................................ 28

Additional care and maintenance ................................................................ 28

Limited warranty .........................................................................................29

FCC compliance and advisory ......................................................................31

www.kodak.com/go/support

iii

1 Getting started

Welcome to your Kodak EasyShare P720 digital frame. Viewing your pictures couldn’t
be simpler!

Setting up your frame

Attaching the frame stand

Your frame displays pictures in landscape orientation. To change to portrait
orientation, see page 6.

Ta b

Make sure the tab is

Slot

secure in the slot.

1 www.kodak.com/go/support

Attaching the power cable

CAUTION:
Do not use this power cable with other devices, including digital

cameras.

1

Turning on your frame

Getting started

Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.

2

Power button - press and hold (for about 2 seconds), then release

www.kodak.com/go/support

2

Getting started

Using your frame’s touch border

Touch at the bottom (tap/slide) or right (tap only) border to find/highlight menu items
or pictures. Press OK to select them.

NOTE: The screen is not touch-sensitive. Do not touch.

CAUTION:
Only use your finger to touch the borders. Using sharp or metal

objects may damage the border or screen.

On the side border, tap between the
icons and the raised guide

(Home)

(Slide show)

.

(Close),

On the bottom
border, tap between
the icons and the
raised guide.

(Slider): Under slider, slide, or touch and hold

(for about 3 seconds to scroll even faster through your images), or tap slider arrows.

Tap Menu for more options, or tap

If the icons disappear, tap the bottom or right border.

Raised guide

to resume a slide show.

or

(Done)

3 www.kodak.com/go/support

Getting started

Setting your language

The language screen appears the first time you turn on your frame.

■ Slide or tap below slider arrows to find your

language, then tap OK.

To change the language at a later time:

■ Tap (Home) → (Settings) → Language.

2

The language screen appears.

Slide to find your language, then tap OK.

1

Enjoying your pictures immediately!

NOTE: If the software installation screen appears, dismiss it and start playing a slide show immediately. To

install the software later, see page 21.

■ To view your pictures or play a slide show,

insert a memory card, or connect a camera or other
USB device (see page 5).

www.kodak.com/go/support

If you are at the Home screen, see page 8 to start
your slide show.

To change the slide show order, see page 10.

4

Getting started

Inserting a memory card

To insert a card, push the card firmly into
the slot until it stops.

To remove a card from:

top card slot - push in the card to release it
side card slot - pull out the card

CAUTION: Insert a micro or mini
memory card in an adapter first, or
the card will get stuck in your frame.

MultiMedia Card

SD/SDHC

Memory Stick

xD

SD/SDHC

Connecting a digital camera or other USB device

USB cable included
with your USB device

USB devices: camera, flash
drive, card reader, etc.
(sold separately)

5 www.kodak.com/go/support

Getting started

Turning off your frame

■ Standby mode—Press and hold the power

button (for about 2 seconds), then release.

■ Power off—Unplug the power cable.

Changing your frame orientation

Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.

Change the stand position:

■ R

emove the stand, turn it 90 °, and replace as shown

page 1).

Change the setting:
1 Tap ( Ho me)

2 Slide to highlight (Viewing options), then tap

OK.

3 Slide to highlight Frame orientation, then tap OK.

4 Slide to highlight Portrait, then tap OK.

→ (Settings).

(see

5 Tap to e xit.

www.kodak.com/go/support

6

Getting started

Mounting your frame on the wall

Use wall-anchoring hardware (not included) to anchor your frame securely to your
wall.

Clip (use to reroute and secure power cable)

Power cable

Wall mounting holes

To change to portrait , turn your frame 90° and use
the wall mounting holes at the top.

7 www.kodak.com/go/support

2 Viewing pictures

Accessing your pictures

Tap Home to access pictures from your memory card and all connected devices (see

page 5). Use the touch borders to make your selections

1 Tap (Home ).

Picture sources and settings icons:

Memory card—appears when you insert a card (page 5). The label and icon
indicate the type of card.

Camera—appears when you connect a digital camera via USB cable (page 5).

USB drive—appears when you insert a USB flash drive (page 5).

Settings—customize your frame settings. For example; set slide show durations
and transitions, set viewing options, screen brightness, clock, and timer.

All connected sources and the Settings icon are
displayed.

2 Slide to highlight a picture source, then:

■ Tap (Slide show) to start a slide show.

OR

■ Tap OK to view thumbnails.

(

see page 3).

www.kodak.com/go/support 8