Kodak DCS 300 Series, DCS 315, DCS 330, DCS 315 - 300 SERIES, DCS 330 - 300 SERIES Quick Reference Manual
DCS 300 Series
Digital Cameras
Camera Status LCD Panel
Using the Digital Controls
Display the Menu bar and select a Menu bar icon: Press
and hold the MENU button and rotate the Main Command
dial until the desired icon is highlighted.
Display a dropdown menu: Highlight the Folder, Menu,
Display, or White Balance icon (see next page), and continue
pressing the MENU button until the dropdown menu appears.
Choose an item from a dropdown menu: Continue pressing
the MENU button and rotate the Main Command dial until
the desired menu choice is highlighted.
Choose an item from a menu screen (e.g., Main menu):
Press and hold the SELECT button and rotate the Main
Command dial to highlight your choice.
Tag an image: Quickly press and release the REC/TAG
button.
Record a sound file: Press and hold the REC/TAG button
and speak into the microphone.
Display Icon
Displays choices for Single,
Four, and Nine Image
Review mode
Status Icon
Displays the Status screen
that contains information
about the current image
White Balance Icon
Displays choices for White
Balance settings
Contrast Icon
Displays the Contrast
screen where you can
adjust the contrast of the
images displayed on the
Image LCD panel (the
images themselves are not
affected)
1
4. AC Adapter Connection
5. Hand Strap eyelet
5
AF-C
AF-S
S
S
REAR
TYPE
PRINT
ISO
AE
SLOW
F
QR
C
M
A
IN
BKT
AF-C
AF-S
S
S
REAR
TYPE
PRINT
ISO
AE
SLOW
F
QR
C
M
A
IN
BKT
AF-C
AF-S
S
S
REAR
TYPE
PRINT
ISO
AE
SLOW
F
QR
C
M
A
IN
BKT
1
1. Vari-Program
2. Exposure mode
3. Shutter speed
4. Aperture
2 3 4
1. Function area indicators
2. Focus area/AF mode
3. Drive mode
4. Flash sync mode
5. Auto Exposure
Bracketing/Flash
Exposure Bracketing
6. Flash output level
compensation
7. Quick recall function
8. ISO setting mode
234
1
5 7
86
1
2
3
4
1. Compensation value/
QR number, ISO
2. Metering system
3. Exposure
Compensation
4. Self-timer
3
4
3. Tripod mount rubber pad
4. Tripod mount
The Menu Bar
Folder Icon
Displays
the Folder
menu
Menu Icon
Displays choices for the
Main and Properties menus
1 PC Card 2 PC Cards
To insert a PC Card,
open the Battery/PC
Card door and insert.
With two cards, the first
card inserted is the
active card.
T o select a diff erent PC
Card, select the Folder
icon, then select the
card. (Refer to other
side.)
Important! Be sure
the Card Busy LED is
off before removing a
PC Card. The blinking
indicates data is being
transferred to or from
the PC Card. You can lose data if you remove
a PC Card when it is busy.
To remove the PC Card, press the Eject
button.
M
A
F
1. Main-Command dial
2. Sub-Command dial
3. Anti-aliasing filter (DCS
330 only)
4. Self-timer LED
5. Lens Release button
6. Focus Mode selector
7. Battery/PC Card door
EASTMAN KODAK COMPANY
Rochester, New York 14650
© Eastman Kodak Company, 2000
Kodak and Kodak Professional are trademarks.
Printed in U.S.A. P/N 6B4715 5/00
Card door, insert the
battery tray into the
battery tray slot until
the tray is locked in
place.
Full
Low
Insufficient
Empty
Camera Front
1
2
3
4
5
6
7
Camera
Back
1
6
7
1. Camera Status LCD
Panel Illuminator button
2. Vari-Program (Ps) button
3. Exposure Mode (MDE)
button
4. Function (FNC) button
5. Function Set (SET) button
6. Serial Port Jack (DCS
330 only)
7. Metering button
8. Exposure Compensation
button
9. PC Card Busy/Record
LED
10. Microphone
11. RESET button
12. Camera Status LCD
Panel
13. REC/TAG button
14. SELECT button
15. MENU button
16. Image LCD panel
17. AE Lock button
18. Main-Command dial
Camera Top
1
2
3
4
5
1. Flash Lock-release
button
2. Self-timer button
3. Neck Strap eyelet
4. BASIC/ADVANCED
switch
5. Accessory shoe
6. Power switch
7. Main-command dial
8. Neck/Hand Strap eyelet
9. Remote Shutter Release
terminal
10. QR-OUT button
11. Shutter Release button
Card 1
Card 0
Eject button
REC/TAG
RESET
BUSY
SET
( ) +/-
FNC
MDE
Ps
SELECTMENU
AE-L
2
3
4
5
8 9 10
11
12
13
14
15
16
17
18
OR
-
O
U
T
O
FF
O
N
B
A
S
IC
ADVANCED
6 7
8
9
10
11
Loading...