For information on replacing batteries and extending battery life, see page 57.
Turning on the camera
Setting the date/time, first time
1
2
At the prompt, press OK.
to change.
for previous/next field.
OK
o accept.
t
2www.kodak.com/go/support
Setting up your camera
Setting the language and date/time, other times
Press Menu.
1
2
3
to highlight Setup Menu
then press OK.
to highlight Language
or Date/Time
If setting the date/time:
to change.
for previous/next field.
OK
to accept.
, then press OK.
Storing pictures on an SD or MMC card
Your camera has 16 MB of internal memory. You can purchase an SD or MMC card to
conveniently store more pictures and videos.
NOTE: We recommend Kodak SD and MMC cards. When using the card for the first time, format it in this
camera before taking pictures (see page 33).
Notched corner
CAUTION:
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card when the Ready light is
blinking may damage pictures, card, or camera.
See page 54 for storage capacities. Purchase SD or MMC cards at a dealer of Kodak
products or www.kodak.com/go/c330accessories.
www.kodak.com/go/support
SD or MMC
card (optional)
3
2Taking pictures and videos
Taking a picture
1
Turn on camera.
Ready light
2
Frame your
subject in the
Viewfinder
or LCD screen.
Taking a video
1
Turn on camera.
Press Shutter button
3
halfway to focus and
set exposure.
When the Ready light
4
turns green, press the
button completely down.
Press the Shutter button
3
completely down
and release.
2
Frame your
subject in the
Viewfinder
or LCD screen.
4www.kodak.com/go/support
To stop recording,
press and release the
Shutter button again.
Taking pictures and videos
Reviewing the picture or video just taken
After you take a picture or video, the LCD screen displays a Quickview for
approximately 5 seconds.
While the picture or video and are displayed:
Delete
If you press
no buttons, the
picture/video is
saved.
OK to play/pause a video
(adjust the volume on your Video
Out device.)
Tag a picture/video for email or as a
favorite, or tag a picture for print.
To view pictures and videos anytime, see page 9.
Checking camera and picture status
Press the LCD On/Off/Status button to see the active camera
and picture settings.
Press once to turn off
the icons of the active
Status
button
camera and picture settings.
Press twice to turn off
the screen entirely.
(Press again to turn on icons and
picture settings.)
www.kodak.com/go/support
5
Taking pictures and videos
Using the auto-focus framing marks (pictures)
When using the LCD screen as a viewfinder, framing marks indicate where the camera
is focusing. For the best pictures, the camera attempts to focus on foreground
subjects, even if the subjects are not centered in the scene.
1Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
While the shutter button is pressed halfway:
Framing marks
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
2If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape, Fireworks, or Video mode. When you use Focus Zone
(page 30) and set Center Zone, the framing marks are fixed at Center Wide.
6www.kodak.com/go/support
Capture mode
Self Timer/Burst
Taking pictures and videos
Flash Mode
Picture size
Pictures/time remaining
Date stamp
Album name
Zoom:
digital
telephoto
wide
Storage
Focus
White balance
ISO
Low battery
Camera mode
Exposure compensation
location
zone
www.kodak.com/go/support
7
Taking pictures and videos
Using optical zoom
Use optical zoom to get up to 3X closer to your subject. Optical zoom is effective
when the lens is no closer than 2 ft (0.6 m) to the subject or 5 in. (13 cm) in Close-up
mode. You can change optical zoom before (but not during) video recording.
1Use the Viewfinder or LCD screen to frame your
subject.
2Press Telephoto (T) to zoom in. Press Wide Angle
(W) to zoom out.
The Zoom indicator shows zoom status.
Zoomindicator
3Press the Shutter button halfway to set the
exposure and focus, then press completely down
Digital zoom range
to take the picture. (When taking videos, press and
release the Shutter button.)
Optical zoom
range
Using digital zoom
Use digital zoom in any Still mode to get an additional 5X magnification beyond
optical zoom. Combined zoom settings are from 3X to 15X.
1Press the Telephoto (T) button to the optical zoom limit (3X). Release the button,
then press it again.
The Zoom indicator shows zoom status.
2Take the picture.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when
using digital zoom. The blue slider on the zoom indicator pauses and turns red when the picture
quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
8www.kodak.com/go/support
Taking pictures and videos
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Press the
through flash modes (see Flash modes table).
The active flash icon is displayed in the
LCD screen.
button repeatedly to scroll
To change the flash settings, see page 26.
Flash-to-subject distance
Zoom positionFlash distance
Wide angle2–12 ft (0.6–3.6 m) @ ISO 140
Telephoto2–7 ft (0.6–2.1 m) @ ISO 140
Reviewing pictures and videos
Press the Review button to view and work with your pictures and videos.
Review
1
(Press again to exit)
2
(previous/next)
Videos:
OK to play/pause
Adjust the volume
Rewind to beginning (during playback)
Next picture/video (during playback)
To save battery power, use the optional Kodak EasyShare camera or printer dock, or
Kodak 3-volt AC adapter. (See www.kodak.com/go/c330accessories.)
NOTE: Pictures taken at the 3.5 MP (3:2) quality setting are displayed at a 3:2 aspect ratio with a black bar
at the top of the screen.
www.kodak.com/go/support
9
Taking pictures and videos
What the review icons mean
Print tag/number of prints
Favorite
Emailtag
Scroll
Video length
Favorite tag
tag
arrows
Protected
Picture number
storage
Image
location
Review mode
Protected
Video number
Email tag
Press OK to Play
or Pause
Image storage
location
Review mode
10www.kodak.com/go/support
Magnifying a picture during review
Taking pictures and videos
W/T
OK
magnify 1X–8X.
view other parts of the picture.
return to 1X
.
Viewing multi-up (thumbnails) during review
view multi-up thumbnails.
view previous/next row of thumbnails.
view previous/next thumbnail.
OK
view single picture.
Cropping a picture during review
Press Menu. (To exit, press Menu again.)
1
Highlight Crop, then press OK.
2
Follow on-screen instructions.
3
move crop box.
zoom out or in.
W/T
(Crop box turns red at maximum zoom.)
OK
crop and save picture. (Original picture is kept.)
NOTE: Cropping may not be supported for images captured on other digital cameras.
Pictures under 2.1 MP cannot be cropped.
www.kodak.com/go/support
11
Taking pictures and videos
Protecting pictures and videos from deletion
Press Review. (To exit, press
1
Review again.)
Note: To cancel Protect,
press OK again.
2
3
Press
4
highlight Protect ,
then press OK.
for previous/next.
Press Menu.
to
The picture or video is protected and cannot be deleted. The Protect icon appears
with the protected picture or video.
Press the Menu button to exit the menu.
CAUTION:
Formatting internal memory or an SD or MMC card deletes all
(including protected) pictures, videos. (Formatting internal
memory also deletes email addresses, album names, and
favorites. To restore them, see EasyShare software Help.)
12www.kodak.com/go/support
Deleting pictures and videos
Taking pictures and videos
Press Review. (To exit, press
1
Review again.)
2
3
Follow the screen prompts.
4
for previous/next.
Press Delete.
PICTURE or VIDEO—deletes the displayed picture or video.
EXIT—exits the Delete screen.
ALL—deletes all pictures and videos from your current storage location.
NOTE: To delete protected pictures and videos, remove protection before deleting.
www.kodak.com/go/support
13
3Transferring and printing
pictures
CAUTION:
Install Kodak EasyShare software
before
connecting the camera or
optional dock to the computer. Failure to do so may cause the
software to load incorrectly.
Minimum system requirements
Windows OS-based computersMacintosh computers
■ Windows 98, 98SE, ME, 2000 SP1, or
XP OS
■ Internet Explorer 5.01 or higher
■ 233 MHz processor or greater
■ 64 MB RAM (128 MB RAM for
Windows XP OS)
■ 200 MB hard disk space available
■ CD-ROM drive
■ Power Mac G3, G4, G5, G4 Cube,
iMac; PowerBook G3, G4; or iBook
computers
■ Mac OS X version 10.2.3, 10.3
■ Safari 1.0 or higher
■ 128 MB RAM
■ 200 MB hard disk space available
■ CD-ROM drive
■ Available USB port
■ Color monitor, 800 x 600 pixels (16-bit
or 24-bit recommended)
NOTE: To download EasyShare software, visit
14www.kodak.com/go/support
■ Available USB port
■ Color monitor, 1024 x 768 pixels
(thousands or millions of colors
recommended)
www.kodak.com/go/c330downloads.
Installing the software
Transferring and printing pictures
CAUTION:
Install Kodak EasyShare software
connecting the camera or optional
dock to the computer. Failure to do so
may cause the software to load
incorrectly.
1Close all software applications that are open on your computer (including
anti-virus software).
2Place the Kodak EasyShare software CD into the CD-ROM drive.
3Load the software:
Windows OS-based computer
—if the install window does not appear, choose
Run from the Start menu and type d:\setup.exe where d is the drive letter that
contains the CD.
Mac OS X
—double-click the CD icon on the desktop, then click the Install icon.
before
4Follow the on-screen instructions to install the software.
Windows OS-based computer—select Typical to automatically install the most
commonly used applications. Select Custom to choose the applications you wish to
install.
Mac OS X
—follow the on-screen instructions.
NOTE: When prompted, take a few minutes to electronically register your camera and software. This lets
you receive information regarding software updates and registers some of the products included
with the camera. You must be connected to your Internet service provider to register electronically.
To register later, see
www.kodak.com/go/register.
5If prompted, restart the computer. If you turned off anti-virus software, turn it back
on. See the anti-virus software manual for details.
For information on the software applications included on the Kodak EasyShare
software CD, click the Help button in the Kodak EasyShare software.
www.kodak.com/go/support
15
Transferring and printing pictures
Transferring pictures with the USB cable
1Turn off the camera.
2Plug the labeled end of the USB cable into the
labeled USB port on your computer. See your
computer user’s guide for details.
3Plug the other end of the USB cable into the labeled
USB port on the camera.
4Turn on the camera.
Kodak EasyShare software opens on your computer.
The software prompts you through the transfer
process.
NOTE: Visit
www.kodak.com/go/howto
for an online tutorial on connecting.
Also available for transferring
You can also use these Kodak products to transfer your pictures and videos.
■ Kodak EasyShare camera dock, Kodak EasyShare printer dock (see page 20)
Purchase these and other accessories at a dealer of Kodak products or
www.kodak.com/go/c330accessories.
16www.kodak.com/go/support
Transferring and printing pictures
Printing pictures
Printing with a Kodak EasyShare printer dock
Dock your camera to the Kodak EasyShare printer dock and print directly—with or
without a computer. The printer dock may require a D-22 Adapter (see page 20).
Purchase this and other accessories at a dealer of Kodak products or
www.kodak.com/go/c330accessories.
Direct printing with a PictBridge enabled printer
Your camera is compatible with PictBridge technology, so you can print directly to
PictBridge enabled printers. You need:
■ Camera with fully-charged batteries, or
with optional Kodak 3-volt AC adapter
■ PictBridge enabled printer
■ USB cable (may be sold separately)
Connecting the camera to a PictBridge enabled printer
1Turn off the camera and printer.
2Optional: If you have a Kodak 3-volt AC adapter (optional accessory), plug it into
the camera and into an electrical outlet.
3Connect the appropriate USB cable from the camera to the printer. (See your
printer user guide or www.kodak.com/go/c330accessories for details.)
www.kodak.com/go/support
17
Loading...
+ 51 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.