Ultra Wash Hi/Lo
Convertible Dishwashing Machine
“One Machinei
For Highi or Low
Temp Dishwashingi i
Withith Greatt Results!”lt
SPECIAL FEATURES:
■Easily Converts from High Temp to Low Temp
■In-line or Corner Operation
■Fresh Water Rinse
■ Probeless Controlled Chemical Injection
Ultra Wash Hi/Lo
Dishwashing Machine
The Hi/Lo was designed especially for the chemical industry. This new concept in dishwashing gives you total flexibility for your customer’s needs at an extremely affordable price. The Hi/Lo comes self-contained as a Straight-Through or Corner operation. It is also easily converted from a High Temp to a Low Temp machine. The 60-second wash cycle allows this machine to clean wares in foodservice operations of up to 250 seats quickly and economically.
OPERATION: The distinctive wash tank allows the machine to utilize all the fresh water from the rinse which helps maintain the water temperature and keeps the wash water fresh. This concept allows Low Temp cleaning principles to be combined with High Temp drying ability, regardless of whether you sanitize with hot water or chlorine. The wash tank is heated with a 3000 watt low water float controlled element with an adjustable thermostat. The unique tank design keeps the small tank of water hot enough to maintain proper temperature throughout the wash cycle and economical enough to operate at an affordable cost.
The Hi/Lo comes standard with probeless chemical controls, but can be easily converted to probe or dry detergent. This unique machine also comes with top mounted control gauges and a complete set of chemical pumps already installed. This is the first High Temp machine to be totally self-contained, and running extra plumbing and electrical lines is not required.
Standard Peristaltic Pumps |
Control Gauges |
|
“HIGH-TEMP” PERFORMANCE
The specially designed 5-gallon tank is split into two halves with a stainless steel divider. Hot water is contained by putting a removable solid cover over the front of the wash tank where the heater and skimmer are located.
Top View Without Solid Pan Cover
When the rinse is activated, the fresh water flows into the rear of the tank through the perforated
removable strainer. This process forces the soiled water under the divider and over the drain skimmer, saving clean, hot water to wash the next load. This keeps the water constantly recycling.
Fresh Water From Rinse Follows This Path
Removable Solid Pan |
Removable |
|
Perforated |
||
Divider |
||
|
Screen |
Water
Level
Indicator
Drain
Skimmer
Recycled Water Goes |
Thermometer |
|
|
Down the Drain |
|
By placing the thermometer at the rear of the divider, proper operating temperatures can be maintained regardless of time between cycles. Traditional high temp units skim the hot water from the top of the whole tank, allowing the fresh, hot water to go right down the drain. This not only causes your heater to work harder, but the wash water gets increasingly soiled.
Visual water levels can be conveniently verified with the Water Level Indicator which is located on the front of the machine.
2