Kenwood TK-980, TK-981 User Manual

TK-980/981

(800/900 MHz) FM Mobile Radios

GENERAL FEATURES

• 15 W 800 & 900 MHz Models

• Trunked Format

• LTR®Trunked Systems

• Conventional Systems

• 32 Systems / 250 Groups

• System Scan

List Type System Scan

•

• 10 Character Alphanumeric Aliases

• Backlit Dot Matrix LCD

• 3-Digit Sub-Display

• Function / Status LCD Icons

• Transmit / Busy / Call Alert / Warn LED

• 6 Backlit PF Keys

• 500 mW Speaker Audio

• Companded Audio

• Encryption / ANI Board Control

• Emergency Call Features

• DTMF Encode / Decode

• Time Out Timer

• Timed Power Off

• ACC Cable Option

• Ignition Sense

Public Address / Horn Alert Option

•

Dynamic Mobile Mic Included

•

• MIL-Spec Noise-canceling Mic Option

• MIL-Spec 12-Key Noise-canceling Mic Option

• Windows®Programming & Tuning

• Windows®Firmware Uploading

• Front Panel Test / Tune

• Cloning

• MIL-STD-810 C/D/E/F

• NPSPAC Option

CONVENTIONAL ZONES

• QT / DQT

• Single Priority Group Scan

• Busy Channel Lockout

Features

TRUNKED ZONES

Kenwood LTR

•

FleetSync

• PTT ID Digital ANI

• Selective Call & Group Call

• Status Messaging

• Emergency Status

• Caller ID Display

• Short Text Messages

• PC Serial Interface

JQA-QMA1205

Options

■ KMC-9C

Control Station Desktop Microphone

■ KMC-27A

Microphone (MIL-SPEC Noise-Canceling)

■ KCT-19

Accessories Connector Cable

■ KCT-31

PC Serial Interface Cable

■ KMC-27B

Microphone

■ KES-3

■ KMC-28A

Keypad Microphone (MIL-SPEC Noise-Canceling)

■ KCT-18

Ignition Sense Cable

External Speaker

■ KES-5

External Speaker

Specifications

Model TK-980 TK-981

GENERAL

Frequency Range Type 1 (RX) 851~870 MHz 935 ~ 941 MHz Type 2 (TX) 806 ~ 825 MHz, 896 ~ 902 MHz, Type 3 (Talk Around) 851 ~ 870 MHz 935 ~ 941 MHz Systems Max. 32 Group Max. 250 per system Channels

Mode Max. 600

LTR

(Conventional) Max. 250

PLL Channel Spacing 25 kHz 12.5 kHz

Operating Voltage 13.6 V DC ± 15 % Current Drain

Standby Less than 0.4 A Receive Less than 1.0 A

Transmit Less than 7.0 A Duty Cycle Transmit: 20% Operating Temperature -22° F ~ +140° F Range (-30° C ~ +60° C) Frequency Stability ±0.00015%

Antenna Impedance 50 Dimensions (W x H x D) 5-1/2 x 1-1/2 x 5-3/4 in. (140 x 40 x 145 mm) Weight (net) 2.07 lbs. (940 g) FCC ID ALH24563110 ALH24572110 IC Certification 282195546A 282195545A

(PLL step: 12.5 kHz)

(-22° F ~ +140° F)

Ω

■ KMB-2B

Mounting Case

■ KLF-2

Line Noise Filter

■ KMB-10

Key Lock Adapter

■ KMB-20

Mounting Case

■ KPS-15

DC Power Supply

All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

Model TK-980 TK-981

RECEIVER (Measurements made per TIA/EIA-603)

Sensitivity (12 dB SINAD) 0.25 µV Selectivity* 75 dB 68 dB Intermodulation Distortion 70 dB 65 dB Spurious Response* 80 dB Audio Output 4 W with less than 5% distortion Channel frequency spread 19 MHz 6 MHz

TRANSMITTER (Measurements made per TIA/EIA-603)

RF Power Output 15 W Spurious & Harmonics 60 dB Modulation 16KØF3E 11KØF3E FM Noise 45 dB 40 dB Audio Distortion Less than 3% Less than 5% Microphone Impedance Low Impedance Channel Frequency Spread 64 MHz 45 MHz

* Typical specifications Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.

FleetSync®is a registered trademark of Kenwood Corporation.

LTR

is a registered trademark of Transcrypt International.

■ KAP-1

PA/HA Unit

■ KDS-100

Mobile Data Terminal

■ KGP-2A/2B

GPS Receiver / Modem Unit

GPS-2A

GPS-2B

Applicable MIL-STD

Standard MIL 810C MIL 810D MIL 810E MIL 810F

Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II

High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II

Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II

Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II

Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I

Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4

Sand & Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III

Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I

Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V

Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

footnotes from Front:

Trunked Format: 32 Systems max. (prog. for LTR®or Conventional), 250 Groups per system max (limited per repeater channels programmed).

DTMF Encode includes PTT ID, Emergency ANI, Manual Encode (KMC-28A DTMF mic required), Auto-Dial (32 numbers); DTMF Decode includes Stun (dead beat disable), primary/secondary selective call with call alert and transpond.

Ignition sense requires KCT-34 ACC cable & KCT-18 Ignition sense cable options.

Public Address / Horn Alert Option- requires KAP-1 PA/HA Unit and KCT-34 ACC Cable options.

KPG-49D required: Windows®98/ NT/ 2000/ Me/XP compatible.

Kenwood LTR®Features: KPG-49D Group Delete/Add, LTR®Tal k Around, Scan Revert Group Display, System Scan, Group Scan, Auto Search.

FleetSync®(not FleetSync®II capable)

Short Text Messages are radio stored & LCD displayed.

ADS#44307 Printed in USA