Kenwood TK-690, TK-890, TK-790 User Manual 2

TK-690/790/890

VHF/UHF FM Mobile Radios

GENERAL FEATURES

• 45W & 110W (136-156, 148-174 MHz)

• 40W (403-430, 450-490, 480-512 MHz)

• 110W-75W (450-480 MHz)

• 110W (29.7-37.0, 35.0-43.0, 39.0-50.0 MHz)

• 160 Channels

• Dual Priority Scan

• Single / Multi Group Scan

• QT / DQT

• Operator Selectable Tone

• Two-Tone Decode

• DTMF Encode/ Decode / Stun

• Encryption / ANI Board Control

• Emergency Call Features

• Companded Audio

• Intercom

• Public Address

• Time Out Timer

• Busy Channel Lockout

• Ignition Sense

• Timed Power Off

• DB-25 Accessory Connector

• 7 Programmable AUX Inputs

• 6 Programmable AUX Outputs

• Windows®Programming & Tuning

• Windows®Firmware Uploading

• Panel Tuning

• Cloning

• MIL-STD-810 C/D/E/F

• MIL-Spec Noise-Cancel Mic (included)

• MIL-Spec 12-Key DTMF Mic Option

FleetSync

• PTT ID Digital ANI

• Emergency Status

MOUNTING CONFIGURATIONS

• Dash Mount

• Single Head Remote Mount

• Dual Head Remote Mount

• Dual Band Remote Mount

• Dual Head / Dual Band Remote Mount

FRONT PANELS / CONTROL HEADS

• Backlit Dot Matrix LCD

• 3-Digit Sub-Display

• Function/Status LCD Icons

• Transmit LED

• Busy, Call Alert, Warn LED

• LCD Dimmer Control

• Power On/Off Switch

• Rotary Volume Knob

• Rotary Selector Knob

• Backlit Keys

• PF Key Label Inserts

• Microphone Jack

• MILSTD 810 512.X Driven Rain

KCH-10 FRONT PANEL

• 8-Character Alphanumeric Aliases

• 5 PF Keys

• UP/DOWN Keys

• Built-in Front Speaker

KCH-11 FRONT PANEL

• 14-Character Alphanumeric Aliases

• 13 PF Keys

• UP/DOWN Keys

• External Speaker Required

JQA-QMA1205

Options Specifications

Model TK-690H TK-790H TK-790 TK-890H TK-890

■ KMC-9B

Desktop Microphone

■ KMC-27

Microphone (MIL-SPEC noise-canceling)

■ KMC-28

Keypad Microphone (MIL-SPEC noise-canceling)

■ KCT-18

Ignition Sense Cable

■ KCT-22

Remote Control Cable

8ft./17ft./25ft.

■ KCT-23

DC Power Cable

■ KES-5

External Speaker (20W)

■ KCH-10

Basic Remote Control Head

■ KCH-11

Full-Featured Remote Control Head

■ KRK-5

Single Control Head Remote Kit

■ KRK-6DH

Dual Control Head Remote Kit

■ KRK-7DB

Dual Band Remote Kit

■ KRK-8DBH

Dual Band & Dual Control Head Remote Kit

All accessories and options may not be available in all markets. Contact an authorized Kenwood dealer for details and complete list of all accessories and options.

GENERAL

Frequency Range

Type 1 29.7-37.0 MHz 148-174 MHz 148-174 MHz 450-480 MHz 450-490 MHz Type 2 35.0-43.0 MHz 136-156 MHz 480-512 MHz

Type 3 39.0-50.0 MHz 403-430 MHz Number of Channels 160 Channel Spacing

Wide 20 kHz 25, 30 kHz 25, 30 kHz 25 kHz 25 kHz

Narrow 12.5, 15 kHz 12.5, 15 kHz 12.5 kHz 12.5 kHz Channel Step 5 kHz 2.5 / 5 / 6.25 / 7.5 kHz 2.5 / 5 / 6.25 / 7.5 kHz 5 / 6.25 kHz 5 / 6.25 kHz Operating Voltage 13.4 V DC ±15% 13.4 V DC ±15% 13.6 V DC ±15% 13.4 V DC ±15% 13.6 V DC ±15% Current Drain

Standby < 0.6 A < 0.6 A < 0.6 A < 0.6 A < 0.6 A

Receive < 2.2 A < 2.2 A < 2.2 A < 2.2 A < 2.2 A

Transmit < 25 A < 25 A < 12 A < 28 A < 12 A Duty Cycle Transmit: 20% Operating Temperature Range -22˚f ~ +140˚f (-30˚c ~ +60˚c) Frequency Stability (-22˚ F - +140˚ F) ±0.0005% ±0.0002% ±0.0002% ±0.0002% ±0.0002% Antenna Impedance 50  Dimensions (W x H x D) (w/ KCH-10) 7x2-1/4x14 1/8in. 7x2-1/4x14 1/8in. 7x2-1/4x9 in. 7x2-1/4x14 1/8in. 7x2-1/4x9 in.

Weight (net) 7.9 lbs. (3.6kg) 7.9 lbs. (3.6kg) 5 lbs. (2.3kg) 7.9 lbs. (3.6kg) 5 lbs. (2.3kg) FCC ID

Type 1 ALH22923110 ALH22933210 ALH22933110 ALH22943210 ALH22943110

Type 2 ALH22923120 ALH22933120 ALH22943120

Type 3 ALH22923130 ALH22943130 IC Certification

Type 1 282195519A 282195450A 282195451A 282195446A 282195447A

Type 2 282195532A 282195510A

Type 3 282195520A

RECEIVER (Measurements made per EIA/TIA-204-D)

Sensitivity

(12dB SINAD) 0.25µV 0.25µV 0.25µV 0.25µV 0.25µV

(20dB Quieting) 0.35µV 0.35µV 0.35µV 0.35µV 0.35µV Selectivity

Wide 85 dB 85 dB 85 dB 85 dB 85 dB

Narrow 80 dB 80 dB 77 dB 77 dB Intermodulation Distortion

Wide 80 dB 80 dB 80 dB 80 dB 80 dB

Narrow 75 dB 75 dB 75 dB 75 dB Spurious Response 90 dB 90 dB 90 dB 90 dB 90 dB Audio Output 13W at 4 with less than 5% distortion (12W 4 with less than 3% distortion)

TRANSMITTER (Measurements made per EIA/TIA-152-C)

RF Output Power 110-45 W 110-45 W 45-5 W 100-40 W 40-5 W

Type of Emission

Wide 16K0F3E 16K0F3E 16K0F3E 16K0F3E 16K0F3E

Narrow 11K0F3E 11K0F3E 11K0F3E 11K0F3E Spurious Response 80 dB 80 dB 80 dB 80 dB 80 dB FM Hum & Noise

Wide 55dB 53dB 53dB 50dB 50dB

Narrow 47dB 47dB 44dB 44dB Microphone Impedance 600  Audio Distortion Less than 2% at 1000 Hz

Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice.

is a registered trademark of Kenwood Corporation.

FleetSync

LTR

is a registered trademark of Transcrypt International.

All other trademarks are property of their respective owners.

(178x60x360 mm) (178x60x360 mm) (178x60x228 mm) (178x60x360 mm) (178x60x228 mm)

(75-40W in 470-480 MHz)

Applicable MIL-STD

Standard MIL 810C MIL 810D MIL 810E MIL 810F

Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock

* Control head only

Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures

500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II

501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II

502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II

503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II

505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I

506.1/Procedure I*, II 506.2/Procedure I*, II 506.3/Procedure I*, II 506.4/Procedure I*, III

507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4

509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4

510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III

514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I

516.2/Procedure I, II, V 516.3/Procedure I, IV 516.4/Procedure I, IV 516.5/Procedure I, IV

footnotes from Front:

Two-Tone Decode (3 sets x 2 pairs each); Operator Selectable Tone (16 QT.DQT code pairs)

DTMF Encode: PTT ID, Emergency ANI, Manual Encode (KMC-28), Auto-Dial (9 numbers); DTMF Decode: Primary/secondary ID, Stun (a.k.a. dead beat disable)

Encryption/ANI Board: PCB lands for wire harness connectors.

Intercom: Dual Head & Dual Head/Dual Band remote mounts only

KCT-18 ignition sense option required.

DB-25 ACC: I/O's for dispatch consoles, desktop remotes, vehicle intercom/PA units, motorcycle PTT/headset kits, PC Laptop /Data Modems, GPS/AVL Modems.

KPG-44D Software required (Windows®98/NT/2000/Me/XP compatible)

ADS#35308 Printed in USA