Kenwood KRFV-5050-D Owners manual

AUDIO VIDEO SURROUND RECEIVER

KRF-V6050D KRF-V5050D

INSTR UCTION MANUAL

KENWOOD CORPORATION

This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area.

PreparationsAdditional Information

About the supplied remote control

Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations.

Operations

Remote Control

B60-4947-00 00 MA (E2, T) 0009

Before applying the power

Caution : Read this page carefully to ensure safe

operation.

Units are designed for operation as follows.

Europe and U.K................................................ AC 230 V only

Other countries ............................... AC 110-120 / 220 - 240 V

Preparations

Unpacking

Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.

Keep this manual handy for future reference.

Accessories

FM indoor antenna (1)

For KRF-V6050D

Remote control unit (1) RC-R0616

AM loop antenna (1)

Batteries (R6/AA) (2)

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

For KRF-V5050D

Remote control unit (1) RC-R0512

Batteries (R6/AA) (2)

Microcomputer malfunction

If operation is not possible or an erroneous display appears, even though all connections have been made properly, reset the microcomputer referring to “In case of difficulty”. °

Maintenance of the unit

When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration.

In regard to contact cleaner

Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Contents

Caution : Read the pages marked carefully to ensure safe operation.

Before applying the power

Preparations

Operations

Before applying the power ................... 2

Safety precautions .............................................. 2

Unpacking .......................................................... 2

How to use this manual ...................................... 4

Special features .................................................. 4

Names and functions of parts ................ 5

Remote control unit (RC-R0616)

(KRF-V6050D) ..................................................... 6

Remote control unit (RC-R0512)

(KRF-V5050D) ..................................................... 7

Setting up the system ......................... 8

Connecting audio components ........................... 9

Connecting video components .........................10

Connecting a DVD player (6 channel input) ...... 11

Digital connections ........................................... 12

Connecting to the AV AUX jacks

(KRF-V6050D only) ........................................... 13

Connecting the antennas .................................. 13

Connecting the system control ......................... 14

Connecting the speakers ..................................15

Preparing the remote control ............................ 17

Preparing for surround sound ............... 18

Speaker settings ...............................................18

Normal playback .............................. 19

Preparing for playback ...................................... 19

Listening to a source component ..................... 20

Adjusting the sound ..........................................20

Recording ...................................... 21

Recording audio (analog sources) .................... 21

Recording video ................................................ 22

Recording audio (digital sources) ...................... 22

Listening to radio broadcasts ............... 23

Tuning (non-RDS) radio stations ....................... 23

Using RDS (Radio Data System) .......................23

Using the RDS DISP. (Display) key ................... 24

Presetting RDS stations

(RDS AUTO MEMORY) ..................................... 24

Presetting radio stations manually .................... 25

Receiving preset stations .................................. 25

Receiving preset stations in order (P.CALL) ...... 25

Tuning by program type (PTY search) .............. 26

Ambience effects.............................. 27

Surround modes ...............................................27

Surround play ................................................... 29

DVD 6-channel playback .................................. 30

Convenient functions ........................................ 30

Remote Control

Additional

Information

Basic remote control operations for other

components (For KRF-V6050D)............. 32

Registering setup codes for other

components ...................................................... 32

Operating other components ............................ 32

Setup code chart (KRF-V6050D)

(For RC-R0616) ................................................ 33

DVD player operations (For KRF-V5050D) ........ 34

Cassette deck, CD player & MD recorder

operations (For KRF-V5050D) ........................... 35

Cassette deck, CD player & MD recorder

operations (For KRF-V6050D) ........................... 36

Other components' operations

(For KRF-V6050D) ............................................ 37

In case of difficulty ........................... 38

Specifications ................................. 40

PreparationsOther

Operations

Remote Control

Remote Control Additional Information

The manual covers the KRF-V6050D and KRF-V5050D. Items such as functions, number of jacks, and remote control details differ somewhat between these models. To confirm the functions available on the model you have purchased, refer to the table below.

Model name

KRF-V6050D RC-R0616 2 systems Equipped

Preparations

KRF-V5050D RC-R0512 1 system Not equipped

This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information.

Remote Control

Speaker out

Preparations

Shows you how to connect your audio and video components to the receiver and prepare the surround processor. We will guide you to make setting up your system as easy as possible. However, since this receiver works with all of your audio and video components, connecting the system can be fairly complex.

Operations

Shows you how to operate the various functions available from the receiver.

Remote Control (KRF-V6050D only)

Shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have registered your components with the proper setup codes, you’ll be able to operate both this receiver and your other AV components (TV, VCR, DVD player, CD player, etc.) using the remote control supplied with this receiver.

Additional Information

Shows you additional information such as “In case of difficulty” (troubleshooting) and “Specifications”.

Terminal

Front input

(A, B)

Before applying the power

Special featuresHow to use this manual

True home theater sound

This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! ¶

Dolby Pro Logic & Dolby 3 Stereo

This surround system reproduces theater-like surround sound from video software marked The PRO LOGIC mode uses the built-in adaptive matrix circuit to steer the Left, Center, Right and Surround channel audio signals. The 3 STEREO mode will redirect the Surround signal to the front left and right speakers when only the front and center speakers are used.

Dolby Digital

The DOLBY DIGITAL mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround.

DTS

DTS (Digital Theater System) is a 5.1 channel digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer) channel for unprecedented clarity, optimum channel separation and a (wide) dynamic range. In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD disc (carrying the “DTS” marking) can be played in Digital Surround. Important: When a DTS disc is played on a CD, LD or DVD player, noise may be output from the analog output. It is recommended that you connect the digital output of the player to the digital input of this unit.

DSP surround modes

The DSP (Digital Signal Processor) used for this receiver incorporates a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ CLUB”, “THEATER”, “STADIUM” and “DISCO” . It is compatible with almost any kind of program source.

DVD 6-channel input

If you own a DVD player equipped with 6-channel output, this receiver allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems.

Memory back up function

Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 2 days.

• Power mode.

• Input selector settings.

• Device preset.

• Picture output.

• Speaker ON/OFF

• Volume level.

• BASS, TREBLE, INPUT level.

• Subwoofer ON/OFF.

• Dimmer level.

• Monitor ON/OFF.

• MD/TAPE settings.

• 6ch/2ch input setting.

• Listen mode setting.

• Speaker settings.

• Input mode setting.

• Midnight mode setting.

• Broadcast band.

• Frequency setting.

• Preset stations.

• Tuning mode.

• CINEMA EQ.

• Source Direct.

Universal IR (InfraRed) remote control (KRF-V6050D only)

In addition to the basic receiver, the remote control supplied with this receiver can also operate almost all of your remote controllable audio and video components. Just follow the simple setup procedure to register the components you have connected.

RDS (Radio Data System) tuner

The receiver is equipped with an RDS tuner that provides several convenient tuning functions: RDS Auto Memory, to automatically preset up to 40 RDS stations broadcasting different programs; station name display, to show you the name of the current broadcast station; and PTY search to let you tune stations by program type.

PTY (Program TYpe) search

Tune the stations by specifying the type of program you want to hear.

Names and functions of parts

CLIP indicator

MUTE indicator

STANDBY

ON/STANDBY

POWER

ON OFF

PHONES

Speaker indicators

TI.VOL

MUTE

CLIP

RDS EON PTY RDS

PTY

TA NEWS

RDS indicators

Speaker selection indicators Input channel indicators Output channel indicators

A SPEAKERS B

Frequency display, Input display, Preset channel display, Surround mode display

LFE SW

S SRSL

MULTI CONTROL

Display

DTS

INPUT MODESET UP

LISTEN MODE

SOUND

AUTO/CINEMA EQ.BAND MEMORY

AUTO SOUND indicator

Band indicators

DOWNMIX indicator

DOLBY

DIGITAL

DIMMER MONITOR

DSP MODE

SOURCE DIRECT

INPUT SELECTOR

PRO LOGIC indicator

FM AM MHz kHz

DIGITAL

AUTO SOUND

PRO LOGIC

S.DIRECT

3 STEREO

MONITOR

DOWNMIX

3 STEREO indicator STEREO indicator

S-VIDEO V L – AUDIO – R

DIGITAL indicator

S.DIRECT indicator

AUTO MEMO

ST.

TUNED

DSP

MONITOR indicator DSP indicator

VOLUME CONTROL

AV AUX

AUTO indicator MEMO. indicator

ST. indicator

TUNED indicator

Preparations

UPDOWN

SPEAKER MUTE

For KRF-V5050D

1 POWER key *

Use to switch the main power ON/OFF.

2 ON/STANDBY (

) key *

Use to switch the power ON/STANDBY when the POWER is turned ON.

STANDBY indicator

3 MULTI CONTROL keys *

Use to control a variety of settings.

4 SET UP key *

Use to select the speakers' settings etc.

5 Surround indicators

DTS indicator ª

Lights when the receiver is in the DTS mode.

DOLBY DIGITAL indicator ª

Lights when the receiver is in the Dolby Digital mode.

DSP MODE indicator

Lights when the receiver is in the DSP mode.

6 INPUT MODE key 8

Use to switch between the digital and analog inputs.

7 DIMMER key ™⁄

Use to adjust the brightness of the display. Use to select the REC MODE.

8 MONITOR key ¡

Use to monitor the source that is connected to the VIDEO2/MONITOR jack.

9 VOLUME CONTROL knob ) 0 PHONES jack ¡

Use for headphone listening.

! SPEAKERS A/B keys )

(For KRF-V6050D)

Use to turn the A/B speakers ON/OFF.

! SPEAKER key )

(For KRF-V5050D)

Use to turn the speakers ON/OFF.

MUTE key ¡ (For KRF-V5050D)

Use to temporarily mute the sound.

@ SOUND key º

Use to adjust the sound quality and ambience effects.

For KRF-V6050D

# BAND key £

Use to select the broadcast band.

$ AUTO/CINEMA EQ. key £

Use to select the auto tuning mode. Use to switch the status of CINEMA EQ.

% LISTEN MODE key ª

Use to select the listening mode.

^ MEMORY key ∞

Use to store radio stations in the preset memory.

& SOURCE DIRECT key ¡

Use to pass the source material direct to the amplifier.

* INPUT SELECTOR knob )

Use to select the input sources.

( AV AUX (S VIDEO, V, AUDIO L/R) jack

(For KRF-V6050D) #

Standby mode

When standby indicator is lit, this receiver is in standby mode and consumes a small amount of current for back-up. This system can be switched on using remote control.

Remote control unit (RC-R0616) (KRF-V6050D)

This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate maker setup codes. ‹

POWER

Preparations

POWER

456

# $

Names and functions of parts

2 3

7 8

9 0

1 Numeric keys ﬁ

Provide functions identical to those of the original remote control supplied with the component you are controlling.

2 LSTN M. key ª

Use to select the listening mode.

RETURN key

Use to operate other components.

3 SET UP key *

Use to select speakers' settings etc.

MENU key

Use to operate other components.

4 SOUND key º

Use to adjust the sound quality and ambience effects.

OSD key

Use to operate other components.

5 MULTI CONTROL keys *

Use to control a variety of settings. Use to operate other components.

P.CALL 4/¢ keys ∞

If tuner is selected as the input source, these keys function as P.CALL keys.

4/¢ keys

If CD or MD is selected as the input source, these keys function as skip keys.

6 TUNING 1/¡ keys

Use to operate the tuner or selected component. If CD, MD or TAPE is selected as the input source, these keys function as search keys.

PTY

™

VCR

DVD

RDS DISP.

P.CALL

BAND

DVD

MD/TAPE

CHANNEL

AV AUX

^ & * ( )

¡

789

RETURN

0 +10

SET UP SOUND

P.CALL

TUNING

B.BOOST

RECEIVER

TITLE TV SEL.

PHONO

DVD

VIDEO1 VIDEO2

LSTN M.

OSDMENU

MULTI CONTROL

ENTER

A/B+100

AUTO

DISC SKIP

INPUT SEL.

CD/DVD

TUNER

DISC SEL.

CINE.EQ

™

MUTE VOLUME

7 B. BOOST key )

Use to select the maximum adjustment setting for the low frequency range.

RECEIVER key

Use to return to the operation of the receiver.

8 DISC SKIP key

If CD is selected as the input source, this key functions as the multi-CD player disc skip key.

A/B key

If TAPE is selected as the input source, this key functions as the A and B play keys of a double cassette deck.

+100 key

Use to select the disc number with the multiCD player.

9 TITLE key

Use to operate other components.

0 TV SEL. key

Use to operate other components.

! INPUT SELECTOR keys (DVD, PHONO,

CD/DVD, TUNER, MD/TAPE, VIDEO1, VIDEO2, AV AUX) )

Use to select the input sources. 4 DVD ¢ keys When in DVD player operations, these keys function as skip keys.

@ MUTE key ¡

Use to temporarily mute the sound.

# POWER ( )key &

Use to turn the receiver on and off.

$ POWER key (TV, VCR, DVD)

Use to turn the other components on and off.

£

If the name of a function is different on the receiver and on the remote control, the name of the remote control key in this manual is indicated in parentheses.

% PTY key §

Use for PTY search.

RDS DISP. key ¢

Use to receive RDS broadcasts.

^ ENTER key

Use to operate other components.

2 key

If tape is selected as the input source, this key functions as the play key for side B of the cassette (the side facing away from the front of the deck).

& BAND key £

Use to select the broadcast band.

6 key

If CD is selected as the input source, this key functions as the play/pause key. If MD or TAPE is selected as the input source, this key functions as the play key.

* AUTO key £

Use to select the auto tuning mode.

7 key

If CD, MD or TAPE is selected as the input source, this key functions as the stop key.

( 8 key

Use to operate other components.

) INPUT SEL. key

Use to operate other components.

¡ CHANNEL %/ﬁ keys

Use to select the channel.

™ CINE. EQ key

Use to switch the status of CINEMA EQ.

DISC SEL. key

Use to operate other components.

£ VOLUME keys ¡

Use to adjust the receiver volume.

Remote control unit (RC-R0512) (KRF-V5050D)

2 3

6 7

SET UP

P.CALL

BASS BOOST

PHONO

456

789

0 +10

OSD

SOUND

MULTI CONTROL

TUNING

A/B+100

DISC SKIP

CD/DVD

POWER

DVD

POWER

RECEIVER

PTY

RETURN

ENTER

AUTO

TUNER

TITLE

RDS DISP.

P.CALL

BAND

DVD

MD/TAPE

LISTEN MODE

Names and functions of parts

Preparations

# $

% ^

& *

1 Numeric keys ∞

If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presets.

2 SET UP key *

Use to select speakers' settings etc.

MENU key

Use to operate other components.

3 SOUND key º

Use to adjust the sound quality and ambience effects.

OSD key

Use to operate other components.

4 MULTI CONTROL keys *

Use to control a variety of settings.

P.CALL 4/¢ keys ∞

If tuner is selected as the input source, these keys function as P.CALL keys.

4/¢ keys

If CD or MD is selected as the input source, these keys function as skip keys.

5 TUNING 1/¡ keys

If tuner is selected as the input source, these keys function as tuning keys. If CD, MD or TAPE is selected as the input source, these keys function as search keys.

6 BASS BOOST key )

Use to select the maximum adjustment setting for the low frequency range.

7 DISC SKIP key

If CD is selected as the input source, this key functions as the multi-CD player disc skip key.

DVD

VIDEO1 VIDEO2

DISC SEL.

CINE.EQ

MUTE VOLUME

A/B key

If TAPE is selected as the input source, this key functions as the A and B play keys of a double cassette deck.

+100 key

Use to select the disc number with the multiCD player.

8 INPUT SELECTOR keys (DVD, PHONO, CD/

DVD, TUNER, MD/TAPE, VIDEO1, VIDEO2)

Use to select the input sources.

9 MUTE key ¡

Use to temporarily mute the sound.

0 POWER (

Use to turn the receiver on and off.

! DVD POWER key ›

Use to operate DVD player. For details, refer to the instruction manual of your DVD player. (Press the DVD POWER key for more than 2 seconds.) 4 DVD ¢ keys When in DVD player operations, these keys function as skip keys.

@ RECEIVER key

Use to return to the operation of the receiver.

# TITLE key

Use to operate other components.

PTY key ¶

Use for PTY search.

RDS DISP. key ¢

Use to receive RDS broadcasts.

) key &

)

(

)

$ LISTEN MODE key º

Use to select the listening mode.

RETURN key

Use to operate other components.

% ENTER key

Use to operate other components.

2 key

If tape is selected as the input source, this key functions as the play key for side B of the cassette (the side facing away from the front of the deck).

^ BAND key £

Use to select the broadcast band.

6 key

If CD is selected as the input source, this key functions as the play/pause key. If MD or TAPE is selected as the input source, this key functions as the play key.

& 8 key

Use to operate other components.

* AUTO key ¢

Use to select the auto tuning mode.

7 key

If CD, MD or TAPE is selected as the input source, this key functions as the stop key.

( CINE.EQ key

Use to switch the status of CINEMA EQ.

DISC SEL. key

Use to operate other components

) VOLUME keys ¡

Use to adjust the receiver volume.

Setting up the system

Make connections as shown in the following pages. When connecting the related system components, be sure to

also refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.

DTS disclaimer clause

DTS Digital Surround™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD software which consequently cannot be

Preparations

decoded and played back inside most CD, LD, or DVD players. For this reason, when DTS-encoded software is played back through the analog outputs of the CD, LD, or DVD player, excessive noise will be exhibited. To avoid possible damage to the audio system, proper precautions should taken by the consumer if the analog outputs are connected directly to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the CD, LD or DVD player.

VIDEO 2/MONITOR jacks

The receiver’s VIDEO 2/MONITOR jacks can be used in two different ways. Make the appropriate setting for the component connected to the jack when the receiver is turned on.

Use as a VIDEO 2 jack

You can connect a video deck or the like to these jacks and perform video playback and recording. The initial factory setting is “VIDEO 2”.

Use as a MONITOR jack

You can connect a cassette deck or the like to these jacks and make use of the deck’s monitoring function during recording. Alternately, you can connect a graphic equalizer to these jacks to apply compensation to the music signal. To use the VIDEO 2/MONITOR jacks as MONITOR jacks, hold down the MONITOR key of the main unit for more than two seconds so that the indication shown below appears.

MONITOR

Input mode settings

CD/DVD, VIDEO2 and DVD/6ch inputs each include jacks for digital audio input and analog audio input. You must select beforehand which type of input is to be used for each connected component.

The initial factory settings for audio signal playback (CD/DVD, DVD/6ch) and (VIDEO2) are digital and analog respectively.

To use the analog audio input for playback instead (if, for example, you have connected a VCR to the VIDEO2 input), you must set the input mode for the corresponding input to the analog mode. After completing connections and turning on the receiver, follow the steps below.

INPUT SELECTOR

INPUT MODE

1 Use the INPUT SELECTOR knob to select CD/DVD, VIDEO2, or

DVD/6ch.

2 Press the INPUT MODE key.

Each press switches the setting as follows:

In DTS play mode

1 D-AUTO (digital input, auto sound) 2 D-MANUAL (digital input, manual sound)

In DVD/6ch play mode

1 D-AUTO (digital input, auto sound) 2 D-MANUAL (digital input, manual sound) 3 6ch INPT (DVD/6ch input) 4 ANALOG (analog input, manual sound)

TI.VOLB

SP A

CLIP MUTE

RDS EON PTY TP TA NEWS

LFE

AUTO SOUND

PRO LOGIC

MHz

DOWN MIX

kHz

STEREO

S.DIRECT MONITOR

DSP

AUTO MEMO

TUNED

ST.

DIGITAL

• To switch the setting back to “VIDEO 2”, once again hold down the

MONITOR key for two seconds or more.

Notes

1. Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced or noise may interfere.

2. Be sure to remove the power cord from the AC outlet before plugging or unplugging any connection cords. Plugging/unplugging connection cords without disconnecting the power cord can cause malfunctions and may damage the unit.

3. Do not connect power cords from components whose power consumption is larger than what is indicated on the AC outlet at the rear of this unit.

Analog connections

Audio connections are made using RCA pin cords. These cables transfer stereo audio signal in an “analog” form. This means the audio signal corresponds to the actual audio of two channels. These cables usually have 2 plugs on each end, one red for the right channel and one white for the left channel. These cables are usually packed together with the source unit, or are available at your local electronics retailer.

In modes other than DTS or DVD play mode

1 D-AUTO (digital input, auto sound) 2 D-MANUAL (digital input, manual sound) 3 ANALOG (analog input, manual sound)

Digital input:

Select this setting to play digital signals from a DVD, CD, or LD player.

Analog input:

Select this setting to play analog signals from a cassette deck, VCR, or turntable.

Auto sound:

In the auto sound mode (AUTO SOUND indicator lights), the receiver selects the listening mode automatically during playback to match the type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting. The initial factory setting is auto sound on. To keep the receiver set to the currently selected listening mode, use the INPUT MODE key to select “D-MANUAL” (manual sound). However, even when this setting is selected, there may be cases in which the listening mode is selected automatically to match a Dolby Digital source signal depending on the combination of listening mode and source signal. If the INPUT MODE key is pressed quickly, sound may not be produced.

Connecting audio components

SYSTEM CONTROL jacks $

Setting up the system

Shape of AC outlets

U. K.

Europe

Preparations

GND

PHONO

RALC

PLAY IN

REC OUT REC OUT PLAY IN

CD/DVD

MD/TAPE

AUDIO

VIDEO 2/MONITOR

IN OUT

Video component, 3 head cassette deck, or Graphic equalizer ¡

OUT

To AC wall outlet

Cassette deck or MD recorder

OUT

CD player

Moving Coil (MC) cartridge record player cannot be used directly from the receiver unit.

OUT

It can only be used when another equalizer amplifier is connected.

Record player

When you connect the audio cord of the video component to the VIDEO2/ MONITOR jacks, connect the video cord (yellow RCA pin cords) of the connected component to the VIDEO2 IN jack.

Connecting video components

Setting up the system

Preparations

VIDEO

VIDEO 2 IN

MONITOR OUT

VIDEO 1 IN

S Video jacks (KRF-V6050D only)

S VIDEO

PLAY IN REC OUT PLAY IN

MONITOR

OUT

DVD VIDEO 1 VIDEO 1

About the S VIDEO jacks

S VIDEO

Use the S VIDEO jacks to make connections to

S VIDEO

PLAY INREC OUTPLAY IN

MONITOR

OUT

DVD

VIDEO 1

RALC

video components with S VIDEO IN/OUT jacks.

÷If you use the S VIDEO

jacks to connect your video playback components, be sure to use the S VIDEO jacks when connecting your monitor and video recording components.

CD/DVD

DVD

VIDEO 1

OUT

CD / DVD

REC OUT

MD / TAPE

PLAY IN

AUDIO

PLAY IN

VIDEO 2/MONITOR VIDEO 1

REC OUT

PLAY INREC OUT

Monitor TV

VIDEO IN

Video Inputs

Video deck

OUT Video inputs and outputs

(Yellow RCA pin cords)

(Yellow RCA pin cord)

OUT Audio inputs and

outputs

DVD player or LD player

OUT

A video component with digital audio outputs should be connected to the VIDEO2 jacks.

Connecting a DVD player (6-channel input)

If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section carefully. 8

PLAY INREC OUTPLAY IN

S VIDEO

MONITOR

OUT

DVD

VIDEO 1

Setting up the system

VIDEO

VIDEO 2 IN

MONITOR OUT

VIDEO 1 IN

VIDEO OUT (Yellow RCA pin cord)

CD/DVD

DVD

VIDEO 1

OUT

RALC

FRONT

DVD/6CH. INPUT

SURROUND

CENTER DVD

VIDEO 2/MONITOR

SUB

COAXIAL

WOOFER

PLAY IN

DVD

Preparations

S VIDEO cord

FRONT OUT L/R

SURROUND OUT L/R

CENTER OUT

DVD player

S VIDEO OUT

COAXIAL DIGITAL OUT (AUDIO)

SUBWOOFER OUT

To switch the speakers off , press the MUTE key.

CAUTION

Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.

• Do not place any objects impairing heat radiation onto the top of unit.

• Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm

Digital connections

The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to the receiver, be sure to read the “Input mode settings” section carefully. 8

Preparations

S VIDEO

PLAY INREC OUTPLAY IN

MONITOR

OUT

DVD

VIDEO 1

Setting up the system

DVD

VIDEO 2/MONITOR

COAXIAL

DIGITAL IN

CD/DVD OPTICAL

Optical fiber cable

RALC

OPTICAL DIGITAL OUT (AUDIO)

CD player

COAXIAL DIGITAL OUT (AUDIO)

Component with a DTS,

COAXIAL DIGITAL OUT (AUDIO)

Dolby Digital, or PCM COAXIAL DIGITAL OUT

RF digital demodulator (DEM-9991D) (sold separately)

Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See “Connecting video components”.)

DOLBY DIGITAL RF OUT (AUDIO)

PCM OUT

LD player

To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect the video signal and analog audio signals to the VIDEO2/MONITOR jacks. (See “Connecting video components”.)

+ 28 hidden pages