Kenwood KRF-V4070D, KRF-V5070D, KRF-V5570D User Manual

AUDIO VIDEO SURROUND RECEIVER

KRF-V5070D

ENGLISH

KRF-V4070D KRF-V5570D

INSTRUCTION MANUAL

KENWOOD CORPORATION

This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.

About the supplied remote control

Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations.

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

B60-5339-00 00 ID (E) 0211

Before applying the power

Caution : Read this page carefully to ensure safe

operation.

Units are designed for operation as follows.

U.S.A. and Canada ........................................... AC 120 V only

Australia ........................................................... AC 240 V only

Europe and U.K. ............................................... AC 230 V only

China and Russia ............................................. AC 220 V only

Other countries .......... AC 110-120 / 220-240 V switchable*

Maintenance of the unit

When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may

ENGLISH

cause discoloration.

In regard to contact cleaner

Do not use contact cleaner because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component.

Safety precautions

WARNING :

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

How to use this manual

This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information.

Preparations

Shows you how to connect your audio and video components to the receiver and prepare the surround processor. Since this receiver works with all of your audio and video components, we will guide you in setting up your system to be as easy as possible.

Operations

Shows you how to operate the various functions available on the receiver.

Remote Control

Shows you how to operate other components using the remote control, as well as a detailed explanation of all remote control operations. Once you have registered your components with the proper setup codes, you’ll be able to operate both this receiver and your other AV components (TV, VCR, DVD player, CD player, etc.) using the remote control supplied with this receiver.

Additional Information

Shows you additional information such as “In case of difficulty” (troubleshooting) and “Specifications”.

Memory back up function

Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet for approximately 1 day.

• Power mode. • SUBWOOFER ON/OFF.

• Input selector settings. • SW RE-MIX ON/OFF.

• Picture output. • Distance setting.

• Speaker ON/OFF. • Input mode setting.

• Volume level. • Midnight mode setting.

• BASS, TREBLE, INPUT level. • PRO LOGIC II mode setting.

• TONE ON/OFF. • Broadcast band.

• LOUDNESS ON/OFF. • Frequency setting.

• Dimmer level. • Preset stations.

• MD/TAPE settings. • Tuning mode.

• Listen mode setting. • ACTIVE EQ mode.

• SP SYSTEM. • DSP mode.

• Speaker settings.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Before applying the power

Contents

Caution : Read the pages marked carefully to ensure

Preparations

safe operation.

Before applying the power .............................. 2

Safety precautions ............................................. 2

How to use this manual ..................................... 2

Unpacking .......................................................... 4

Preparing the remote control ............................ 4

Special features ................................................. 5

Names and functions of parts ......................... 6

Main Unit ........................................................... 6

Remote control unit (RC-R0627)

(KRF-V5070D) ..................................................... 7

Remote control unit (RC-R0628) (KRF-V4070D/

V5570D) ............................................................. 8

Setting up the system ........................................ 9

Connecting audio components ........................ 10

Connecting video components ........................ 11

Digital connections .......................................... 12

Connecting a DVD player (6-channel input)

(For KRF-V5070D only) .................................... 13

Connecting the speakers ................................. 14

Connecting the terminals ................................ 15

Connecting the antennas ................................. 15

Connecting the system control ....................... 16

Preparing for surround sound ....................... 17

Speaker settings .............................................. 17

Remote Control

Additional

Information

Basic remote control operations for other

components ....................................................... 31

DVD player operation keys .............................. 31

CASSETTE deck, CD player & MD recorder

operations ........................................................ 32

In case of difficulty.......................................... 33

Specifications .................................................. 35

ENGLISH

Operations

Normal playback.............................................. 19

Preparing for playback ..................................... 19

Listening to a source component .................... 19

Adjusting the sound ......................................... 20

Recording .......................................................... 21

Recording audio (analog sources) ................... 21

Recording video ............................................... 21

Recording audio (digital sources) .................... 21

Listening to radio broadcasts ....................... 22

Tuning (non-RDS) radio stations ...................... 22

Using RDS (Radio Data System) ..................... 22

Presetting radio stations manually .................. 23

Receiving preset stations ................................ 23

Receiving preset stations in order (P.CALL) ... 23

Using the RDS DISPLAY key ........................... 24

Presetting RDS stations (RDS AUTO

MEMORY) ........................................................ 24

Tuning by Program TYpe (PTY search) ............ 25

Ambience effects ............................................. 26

Surround modes .............................................. 26

Surround play ................................................... 28

DVD 6-channel playback

(For KRF-V5070D only) .................................... 29

Convenient functions ....................................... 29

Before applying the power

Unpacking

Unpack the unit carefully and make sure that all accessories are present.

FM indoor antenna (1) AM loop antenna (1)

For KRF-V5070D

Remote control unit (1) Batteries (R6/AA) (2)

ENGLISH

RC-R0627

For KRF-V4070D and KRF-V5570D

Remote control unit (1) Batteries (R6/AA) (2) RC-R0628

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify your shipper immediately. Kenwood recommend that you retain the original carton and packing materials in case you needs to move or ship the unit in the future.

Keep this manual handy for future reference.

Preparing the remote control

Loading the batteries

1 Remove the cover. 2 Insert the batteries.

3 Close the cover.

• Insert two AA-size (R6) batteries as indicated by the polarity markings.

Operation

When the STANDBY indicator is lit, the power turns ON when you press the POWER press the key you want to operate.

key on the remote control. When the power comes ON,

Operating range (Approx.)

Remote sensor

6 m

POWER

Infrared ray system

• When pressing more than one remote control key successively, press the keys securely by leaving an interval of 1 second or more between keys.

Notes

1. The supplied batteries may have shorter lives than ordinary batteries due to use during operation checks.

2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.

3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction. In such a case, change the location of the system installation to prevent malfunction.

Before applying the power

Special features

True home theater sound

This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software. Select a surround mode according to your equipment or the software you are going to play and enjoy! §

Dolby Digital

The DOLBY DIGITAL mode lets you enjoy full digital surround from software processed in the Dolby Digital format. Dolby Digital provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround.

Dolby PRO LOGIC

DOLBY PRO LOGIC II, whilst totally compatible with its predecessor PRO LOGIC, provides greater advantages in surround sound. It allows user to enjoy the conventional stereo or Dolby Surround with a convincing “5.1 like” presentation. PRO LOGIC II offers special features for controlling the overall spatial, dimensionality and frontal sound field imaging. PRO LOGIC II produces an impressive surround sound from video software marked When listening to music, you will be able to enjoy the experience of sheer STEREO surround sound.

and three-dimensional space from music CD.

DTS

DTS (Digital Theater System) is a 5.1 channel digital audio format that provides five full-spectrum channels and one low-frequency (subwoofer) channel for unprecedented clarity, optimum channel separation and a (wide) dynamic range. In the DTS mode, the 5.1 channel digital input from a DTS CD, LD or DVD disc (carrying the “DTS” marking) can be played in Digital Surround. Important: When a DTS disc is played on a CD, LD or DVD player, noise may be output from the analog output. It is recommended that you connect the digital output of the player to the digital input of this unit.

DSP surround modes

The DSP (Digital Signal Processor) used for this receiver incorporates a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ CLUB”, THEATER”, STADIUM” and “DISCO”. It is compatible with almost any kind of program source.

DVD 6-channel input (For KRF-V5070D only)

If you own a DVD player equipped with 6-channel output, this receiver allows you to obtain the full surround sound impact of DVD source material featuring multi-channel encoding. Since the source signals are digital and each channel is input independently, the resulting ambience is far superior to what can be achieved with conventional surround sound systems.

ACTIVE EQ

ACTIVE EQ mode will produce a more dynamic sound quality in any condition. You can enjoy a more impressive sound effect when ACTIVE EQ is turned on during Dolby Digital and DTS playback.

IR (InfraRed) remote control

In addition to the basic receiver opeations, this IR remote control supplied can also operate Kenwood cassette deck, MD recorder or CD player which are connected using the system control cords. This remote control can also control Kenwood DVD players directly without using the DVD players' remote control.

RDS (Radio Data System) tuner

The receiver is equipped with an RDS tuner that provides several convenient tuning functions: RDS Auto Memory, to automatically preset up to 40 RDS stations broadcasting different programs; station name display, to show you the name of the current broadcast station; and PTY search to let you tune stations by program type.

PTY (Program TYpe) search

Tune the stations by specifying the type of program you want to hear.

ENGLISH

Names and functions of parts

Main Unit

RDS indicators

ENGLISH

Speaker indicator

CLIP indicator

TONE indicator LOUDNESS indicator

96kHzfs indicator

ON ⁄ STANDBY

SPEAKERS ON ⁄ OFF

STANDBY

POWER

ON OFF PHONES

MUTE indicator

DIMMER

ACTIVE EQ

Frequency display, Input display, Preset channel display, Surround mode display

Speaker selection indicators Input channel indicators Output channel indicators

ACTIVE EQ DTS

DOLBY DIGITAL

LISTEN MODE

INPUT MODE BAND AUTO MEMORY

Display

DTS indicator

Band indicators

DOLBY DIGITAL indicator

PRO LOGIC indicator

MULTI CONTROL INPUT SELECTOR

SOUND

SETUP

AUTO DETECT indicator

6CH INPUT indicator

DOWN

DIGITAL indicator

AUTO indicator

MEMO. indicator

ST. indicator

TUNED indicator

DSP indicator

STEREO indicator

VOLUME CONTROL

MUTE

1 POWER ON/OFF key &

Use to turn the main power ON/OFF.

2 ON/STANDBY

key &

Use to switch the power ON/STANDBY when the POWER is turned ON.

STANDBY indicator

3 DIMMER key

Use to select the REC MODE. ¡ Use to adjust the brightness of the display.

4 LISTEN MODE key •

Use to select the listening mode.

5 Surround LED (light-emitting diode)

indicators ACTIVE EQ mode LED indicator )

Lights when the receiver is in the ACTIVE EQ mode.

DOLBY DIGITAL mode LED indicator •

Lights when the receiver is in the Dolby Digital mode.

6 SOUND key ª

Use to adjust the sound quality and the ambience effects.

7 MULTI CONTROL knob &

Use to control a variety of settings.

8 INPUT SELECTOR knob (

Use to select the input sources.

9 VOLUME CONTROL knob ( 0 PHONES jack )

Use for headphone listening.

! SPEAKERS ON/OFF key (

Use to turn the speakers ON/OFF.

@ ACTIVE EQ key )

Use to select ACTIVE EQ setting.

DTS mode LED indicator •

Lights when the receiver is in the DTS mode.

Standby mode

While the standby indicator is lit, a small amount of power is supplied to the system to back-up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.

# INPUT MODE key 9

Use to switch between full auto, digital and analog inputs.

$ BAND key ™

Use to select the broadcast band.

% AUTO key

Use to change “TAPE” indication to “MD”.

(

Use to select the auto tuning mode. ™

^ MEMORY key £

Use to store radio stations in the preset memory.

& SETUP key &

Use to select the speakers' settings etc.

* MUTE key )

Use to temporarily mute the sound.

Connection at POWER ON/OFF key

The power in this equipment will not be completely cut off from the AC wall outlet when the main switch is turned OFF.

Names and functions of parts

Remote control unit (RC-R0627) (KRF-V5070D)

456

789

0+10

SETUP

P.CALL

TUNING

BASS BOOST

PHONO

DVD

VIDEO1 VIDEO2

MUTE

DOWN-PAGE-UP LOUDNESS

OSD

RETURN

SOUND

LISTEN MODE

MULTI CONTROL

ENTER

AUTO

A/B+100

DISC SKIP

CD/DVD

TUNER

DISC SEL.

ACTIVE EQ

VOLUME

POWER

DVD

POWER

RECEIVER

PTY

TOP MENU

RDS DISPLAY

P.CALL

BAND

DVD/6CH

MD/TAPE

TONE

ENGLISH

If the name of a function is different on the receiver and on the remote control, the name of the remote control key in this manual is indicated in parentheses.

1 Numeric keys £

If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presets.

2 DOWN-PAGE- key

Use to operate the DVD component.

LOUDNESS key )

Use to switch the status of LOUDNESS.

3 MENU key

Use to operate the DVD component.

SETUP key &

Use to select the speakers' settings etc.

4 OSD (On Screen Display) key

Use to operate the DVD component.

SOUND key ª

Use to adjust the sound quality and ambience effects.

5 MULTI CONTROL %/ﬁ keys &

Use to control a variety of settings. Use to operate other components.

P.CALL 4/¢ keys £

If tuner is selected as the input source, these keys function as preset channel call keys.

4/¢ keys

If CD or MD is selected as the input source, these keys function as skip keys.

6 TUNING 1/¡ keys

Use to operate the tuner or selected component. If CD, MD or TAPE is selected as the input source, these keys function as search keys.

7 A/B key

If TAPE is selected as the input source, this is A and B deck of a double cassette deck.

+100 key

Use to select the disc number with the multiCD player.

DISC SKIP key

If CD is selected as the input source, this key functions as the multi-CD player disc skip key.

8 BASS BOOST key )

Use to select the maximum adjustment setting for the low frequency range.

9 Input Selector keys (DVD/6CH, PHONO,

CD/DVD, TUNER, MD/TAPE, VIDEO 1, VIDEO 2) (

Use to select the input sources. 4 DVD ¢ keys When in DVD player operations, these keys function as skip keys.

0 DISC SEL. key

Use to operate other components.

ACTIVE EQ key )

Use to select ACTIVE EQ setting.

! MUTE key )

Use to temporarily mute the sound.

@ POWER

key

Use to turn the receiver on and off.

# DVD POWER key

Use to turn on the DVD equipment.

$ RECEIVER key

Use to return to the operation of the receiver.

% -PAGE-UP key

Use to operate the DVD component.

PTY key ∞

Use for PTY search.

^ TOP MENU key

Use to operate the DVD component.

RDS DISPLAY key ¢

Use for RDS function.

& RETURN key

Use to operate the DVD component.

LISTEN MODE key •

Use to select the listening mode.

* ENTER key

Use to operate other components.

2 key

Use to operate other components.

( BAND key ™

Use to select the broadcast band. 6 key If CD is selected as the input source, this key functions as the play/pause key. If MD or TAPE is selected as the input source, this key functions as the play key.

) 8 key

Use to operate other components.

¡ AUTO key ™

Use to select the auto tuning mode. 7 key If CD, MD or TAPE is selected as the input source, this key functions as the stop key.

™ TONE key )

Use to switch the status of TONE control.

£ VOLUME keys (

Use to adjust the receiver volume.

Names and functions of parts

Remote control unit (RC-R0628) (KRF-V4070D/V5570D)

ENGLISH

456

789

0+10

SETUP

P.CALL

TUNING

BASS BOOST

AUX CD/DVD

DVD

VIDEO1 VIDEO2

MUTE

DOWN-PAGE-UP LOUDNESS

OSD

RETURN

SOUND

LISTEN MODE

MULTI CONTROL

ENTER

AUTO

A/B+100

DISC SKIP

TUNER

DISC SEL.

ACTIVE EQ

VOLUME

POWER

DVD

POWER

RECEIVER

PTY

TOP MENU

RDS DISPLAY

P.CALL

BAND

DVD

MD/TAPE

TONE

If the name of a function is different on the receiver and on the remote control, the name of the remote control key in this manual is indicated in parentheses.

1 Numeric keys £

If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presets.

2 DOWN-PAGE- key

Use to operate the DVD component.

LOUDNESS key )

Use to switch the status of LOUDNESS.

3 MENU key

Use to operate the DVD component.

SETUP key &

Use to select the speakers' settings etc.

4 OSD (On Screen Display) key

Use to operate the DVD component.

SOUND key ª

Use to adjust the sound quality and ambience effects.

5 MULTI CONTROL %/ﬁ keys &

Use to control a variety of settings. Use to operate other components.

P.CALL 4/¢ keys £

If tuner is selected as the input source, these keys function as preset channel call keys.

4/¢ keys

If CD or MD is selected as the input source, these keys function as skip keys.

6 TUNING 1/¡ keys

Use to operate the tuner or selected component. If CD, MD or TAPE is selected as the input source, these keys function as search keys.

7 A/B key

If TAPE is selected as the input source, this is A and B deck of a double cassette deck.

+100 key

Use to select the disc number with the multiCD player.

DISC SKIP key

If CD is selected as the input source, this key functions as the multi-CD player disc skip key.

8 BASS BOOST key )

Use to select the maximum adjustment setting for the low frequency range.

9 Input Selector keys (DVD, AUX, CD/DVD,

TUNER, MD/TAPE, VIDEO 1, VIDEO 2)(

Use to select the input sources. 4 DVD ¢ keys When in DVD player operations, these keys function as skip keys.

0 DISC SEL. key

Use to operate other components.

ACTIVE EQ key )

Use to select ACTIVE EQ setting.

! MUTE key )

Use to temporarily mute the sound.

@ POWER

key

Use to turn the receiver on and off.

# DVD POWER key

Use to turn on the DVD equipment.

$ RECEIVER key

Use to return to the operation of the receiver.

% -PAGE-UP key

Use to operate the DVD component.

PTY key ∞

Use for PTY search.

^ TOP MENU key

Use to operate the DVD component.

RDS DISPLAY key ¢

Use for RDS function.

& RETURN key

Use to operate the DVD component.

LISTEN MODE key •

Use to select the listening mode.

* ENTER key

Use to operate other components.

2 key

Use to operate other components.

( BAND key ™

) 8 key

Use to operate other components.

¡ AUTO key ™

Use to select the auto tuning mode. 7 key If CD, MD or TAPE is selected as the input source, this key functions as the stop key.

™ TONE key )

Use to switch the status of TONE control.

£ VOLUME keys (

Use to adjust the receiver volume.

Setting up the system

Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.

Notes

1. Be sure to insert all connection cords securely. If their connections are imperfect, the sound may not be produced or there will be noise interference.

2. Be sure to remove the power cord from the AC outlet before plugging or unplugging any connection cords. Plugging/unplugging connection cords without disconnecting the power cord can cause malfunctions and may damage the unit.

3. Do not connect power cords from components whose power consumption is larger than what is indicated on the AC outlet at the rear of this unit.

Analog connections

Audio connections are made using RCA pin cords. These cables transfer stereo audio signal in an “analog” form. This means the audio signal corresponds to the actual audio of two channels. These cables usually have 2 plugs at each end, red for the right channel and white for the left channel. These cables are usually packed together with the source unit, or are available at your local electronics retailer.

Microcomputer malfunction

If operation is not possible or an erroneous display appears, even though all connections have been made properly, reset the microcomputer by referring to “In case of difficulty”. ‹

Input mode settings

CD/DVD, VIDEO2 and DVD or DVD/6CH (KRF-V5070D only) inputs each include jacks for digital audio input and analog audio input. After completing connections and turning on the receiver, follow the steps below.

LISTEN MODE

INPUT MODE

1 Use the INPUT SELECTOR knob to select CD/DVD, VIDEO2,

DVD or DVD/6CH (KRF-V5070D only).

2 Press the INPUT MODE key.

Each press switches the setting as follows:

In DTS play mode

1 F-AUTO (digital input, analog input) 2 D-MANUAL (digital input)

In CD/DVD, VIDEO2, DVD or DVD/6CH (KRF-V5070D only) play mode

1 F-AUTO (digital input, analog input) 2 D-MANUAL (digital input) 3 6CH INPT (DVD/6CH input) 4 ANALOG (analog input)

INPUT SELECTOR

ENGLISH

Digital input:

Select this setting to play digital signals from a DVD, CD, or LD player.

Analog input:

Select this setting to play analog signals from a cassette deck, VCR, or record player.

Auto detect:

In “F-AUTO” (full auto) mode (AUTO DETECT and DIGITAL indicators light up), the receiver detects the digital or analog input signals automatically. Priority is given to digital signal during input mode selection. The receiver will select the input mode and listening mode automatically during playback to match the type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting. The initial factory setting is full auto.

To keep the receiver set to the currently selected listening mode, use the INPUT MODE key to select “D-MANUAL” (digital manual). However, even when this setting is selected, there may be cases in which the listening mode is selected automatically to match a Dolby Digital source signal depending on the combination of listening mode and source digital. In D-MANUAL mode, if the audio reproduction stops in the middle due to change in the input signals, etc, press the LISTEN MODE key. If the INPUT MODE key is pressed quickly, sound may not be produced. Press the INPUT MODE key again.

Setting up the system

Connecting audio components

ENGLISH

GND

SYSTEM CONTROL jacks ^

CD/DVD

REC OUT PLAY IN

PHONO

MD / TAPE

AUDIO

REC OUT PLAY IN

VIDEO1

Shape of AC outlets

U.K.

EUROPE

To AC wall outlet

OUTIN

Video component ¡

OUT

Cassette deck or MD recorder

AUX

(For KRF-V4070D/

OUT

CD or DVD player

V5570D)

Moving coil (MC) cartridge record player cannot be used directly from the receiver unit. It

OUT

can only be used when another equalizer amplifier is connected. (For KRF-V5070D only)

Record player

Setting up the system

Connecting video components

DVD IN

VIDEO 2 IN

VIDEO 1

VIDEO

MONITOR

OUT

VIDEO 1

OUT

VIDEO IN

Monitor TV

AUDIO

VIDEO 1

PLAY IN VIDEO 2

ENGLISH

For KRF-V4070D/ V5570D only

DVDREC OUT PLAY IN

Video inputs

Video

IN/OUT

IN IN

(Yellow RCA pin cords)

Video deck

OUT OUT Video inputs and outputs

(Yellow RCA pin cords)

Audio inputs and outputs

DVD player or LD player

OUT OUT

DVD player or LD player

OUT

A video component with digital audio outputs should be connected to the VIDEO 2 jacks.

Audio IN/OUT

+ 25 hidden pages