Kenwood KMM-BT203 User manual

KMM-BT203

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

DIGITAL-MEDIA-RECEIVER

BEDIENUNGSANLEITUNG

RICEVITORE MULTIMEDIALE DIGITALE

ISTRUZIONI PER L’USO

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

B5A-1344-00 (EN)© 2016 JVC KENWOOD Corporation

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable
for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling
these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and
waste disposal will help conserve resources whilst preventing detrimental effects on our health and the
environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien
(anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass
dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle
für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die
Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen
über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen
Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e
delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono
essere smaltiti insieme ai normali rifiuti di casa.
I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in
grado di trattare questi prodotti e di smaltirne i loro componenti.
Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio
comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla
salute e all’ambiente.
Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

For Israel

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы
(годности) данного товара “по истечении которого он может представлять опасность для жизни,
здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7)
лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут
храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов,
упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в
частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с
законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C
Влажность : от 0% до 90%

i

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to
connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with iPod
or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the
U.S. and other countries.

• Lightning is a trademark of Apple Inc.

• The “AAC” logo is a trademark of Dolby Laboratories.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names
are those of their respective owners.

• Android is trademark of Google Inc.

libFLAC

Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson
Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:

- Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.

- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and
the following disclaimer in the documentation and/or other materials provided with the distribution.

- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to
endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

ii

Declaration of Conformity with regard to the RE Directive 2014/53/EU
Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU
Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Dichiarazione di conformità alla Direttiva RE 2014/53/EU
Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Rappresentante UE:

JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Декларация соответствия относительно Директивы 2014/53/EU RE
Декларация соответствия относительно Директивы 2011/65/EU об
ограничении содержания вредных веществ

Производитель:

ДжейВиСи КЕНВУД Корпорейшн
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви.
Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

English

Hereby, JVCKENWOOD declares that the radio equipment
“KMM-BT203” is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement
radio « KMM-BT203 » est conforme à la directive
2014/53/UE.
L’intégralité de la déclaration de conformité UE est
disponible à l’adresse Internet suivante :
http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät
“KMM-BT203” der Richtlinie 2014/53/EU entspricht.
Der volle Text der EU-Konformitätserklärung steht unter
der folgenden Internetadresse zur Verfügung:
http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur
“KMM-BT203” in overeenstemming is met Richtlijn
2014/53/EU.
De volledige tekst van de EU-verklaring van
overeenstemming is te vinden op het volgende
internetadres:
http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio
radio “KMM-BT203” è conforme alla Direttiva
2014/53/UE.
Il testo integrale della dichiarazione di conformità UE è
disponibile al seguente indirizzo internet:
http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de
radio “KMM-BT203” cumple la Directiva 2014/53/EU.
El texto completo de la declaración de conformidad con la
UE está disponible en la siguiente dirección de internet:
http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento
de rádio “KMM-BT203” está em conformidade com a
Diretiva 2014/53/UE.
O texto integral da declaração de conformidade da UE está
disponível no seguinte endereço de internet:
http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy
“KMM-BT203” jest zgodny z dyrektywą 2014/53/UE.
Pełny tekst deklaracji zgodności EU jest dostępny pod
adresem:
http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové
zařízení “KMM-BT203” splňuje podmínky směrnice
2014/53/EU.
Plný text EU prohlášení o shodě je dostupný na následující
internetové adrese:
http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KMM-BT203“
rádióberendezés megfelel a 2014/53/EU irányelvnek.
Az EU konformitási nyilatkozat teljes szövege az alábbi
weboldalon érhető el:
http://www.kenwood.com/cs/ce/eudoc/

iii

Svenska

Härmed försäkrar JVCKENWOOD att
radioutrustningen “KMM-BT203” är i enlighet med
direktiv 2014/53/EU.
Den fullständiga texten av EU-försäkran
om överensstämmelse finns på följande
Internetadress:
http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite
“KMM-BT203” on direktiivin 2014/53/EU
mukainen.
EU-vaatimustenmukaisuusvakuutusvaatimus
löytyy kokonaisuudessaan seuraavasta internet­osoitteesta:
http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema
»KMM-BT203« v skladu z Direktivo 2014/53/EU.
Celotno besedilo direktive EU o skladnosti je
dostopno na tem spletnem naslovu:
http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že
rádiové zariadenie „KMM-BT203“ vyhovuje
smernici 2014/53/EÚ.
Celý text EÚ vyhlásenia o zhode nájdete na
nasledovnej internetovej adrese:
http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret
“KMM-BT203” er i overensstemmelse med
Direktiv 2014/53/EU.
EU-overensstemmelseserklæringens fulde ordlyd
er tilgængelig på følgende internetadresse:
http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο
ραδιοεξοπλισμός «KMM-BT203» συμμορφώνεται
με την Οδηγία 2014/53/ΕΕ.
Το πλήρες κείμενο της δήλωσης συμμόρφωσης
της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση
στο διαδίκτυο:
http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et
„KMM-BT203“ raadiovarustus on vastavuses
direktiiviga 2014/53/EL.
ELi vastavusdeklaratsiooni terviktekst on
kättesaadav järgmisel internetiaadressil:
http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra
„KMM-BT203” atbilst direktīvas 2014/53/ES
prasībām.
Pilns ES atbilstības deklarācijas teksts ir pieejams
šādā tīmekļa adresē:
http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga
„KMM-BT203“ atitinka 2014/53/EB direktyvos
reikalavimus.
Visą EB direktyvos atitikties deklaracijos tekstą
galite rasti šiuo internetiniu adresu:
http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar­radju “KMM-BT203” huwa konformi
mad-Direttiva 2014/53/UE.
It-test kollu tad-dikjarazzjoni ta’ konformità huwa
disponibbli fl-indirizz intranet li ġej:
http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema
“KMM-BT203” u skladu s Direktivom 2014/53/EU.
Cjeloviti tekst deklaracije Europske unije o
usklađenosti dostupan je na sljedećoj internet
adresi:
http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că
echipamentul radio “KMM-BT203” este în
conformitate cu Directiva 2014/53/UE.
Textul integral al declarației de conformitate UE
este disponibil la urmatoarea adresă de internet:
http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че
радиооборудването на “KMM-BT203” е в
съответствие с Директива 2014/53/ЕС.
Пълният текст на ЕС декларацията за
съответствие е достъпен на следния интернет
адрес:
http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KMM-BT203” radyo
ekipmanının 2014/53/AB Direktifine uygun
olduğunu bildirir.
AB uyumluluk deklarasyonunun tam metni
aşağıdaki internet adresinde mevcuttur.
http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет,
что радиооборудование «KMM-BT203»
соответствует Директиве 2014/53/EU.
Полный текст декларации соответствия
ЕС доступен по следующему адресу в сети
Интернет:
http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє,
що радіообладнання «KMM-BT203» відповідає
Директиві 2014/53/EU.
Повний текст декларації про відповідність ЄС
можна знайти в Інтернеті за такою адресою:
http://www.kenwood.com/cs/ce/eudoc/

iv

CONTENTS

BEFORE USE 2

BASICS 3

GETTING STARTED 3

1 Select the display language

and cancel the demonstration
2 Set the clock and date
3 Set the initial settings

RADIO 5

USB/iPod/ANDROID 7

AUX 9

BLUETOOTH® 10

AUDIO SETTINGS 16

DISPLAY SETTINGS 19

TROUBLESHOOTING 20

REFERENCES 22

Maintenance
More information

SPECIFICATIONS 23

INSTALLATION/
CONNECTION 25

BEFORE USE

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•

USB rating is indicated on the main unit. To view, detach the faceplate.

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 26)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate.

•

English indications are used for the purpose of explanation. You can select the display language from the

• [XX]

indicates the selected items.

• ( XX)

indicates references are available on the stated page.

( 3)

[FUNCTION]

menu.

( 5)

2

ENGLISH

BASICS

Faceplate

GETTING STARTED

Volume knob

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly.

Display window

How to resetAttach Detach

Press

• Press and hold to turn off the power.

Press

.

repeatedly.

( 23)

1

Select the display language and cancel the
demonstration

When you turn on the power for the first time (or

[FACTORY RESET]

“SEL LANGUAGE”

1 Turn the volume knob to select

(Russian) or

[ENG]

Then, the display shows: “CANCEL DEMO”

“VOLUME KNOB”.

is set to

[YES], 4

“PRESS” “VOLUME KNOB”

[SPA]

is selected for the initial setup.

(Spanish), then press the knob.

), the display shows:

[ENG]

(English),

“PRESS”

[RUS]

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Then, the display shows the selected crossover type:
“2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover
type”. (

5)

ENGLISH

3

GETTING STARTED

2

Set the clock and date

1

Press the volume knob to enter

2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select
4 Turn the volume knob to make the settings, then press the knob.

Hour

Minute

5 Turn the volume knob to select
6 Turn the volume knob to select

To set the date

7 Turn the volume knob to select
8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select
10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

3

Set the initial settings

1

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter
3 Turn the volume knob to select an item (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.

To return to the previous setting item, press .

[FUNCTION]
[CLOCK]

[CLOCK ADJUST]

[CLOCK FORMAT]
[12H]

[DATE FORMAT]
[DD/MM/YY]

[DATE SET]

[FUNCTION]

.

, then press the knob.

or

[24H]

, then press the knob.

or

, then press the knob.

.

, then press the knob.

, then press the knob.

, then press the knob.

[MM/DD/YY]

, then press

AUDIO CONTROL

SWITCH
PREOUT

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP

SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

FACTORY RESET YES

(Not applicable if 3-way crossover is selected.)

REAR/SUB-W

connected to the line out terminals on the rear (through an external
amplifier).

NORMAL

(FM1/FM2/FM3/MW/LW).;
button, regardless of the selected band.

(Not applicable if 3-way crossover is selected.)

ON

ON

Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.

20M

YES

activated).
For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.

NO

Default:

: Selects whether rear speakers or a subwoofer are

( 26)

:Memorizes one station for each preset button in each band

:Activates the keypress tone.;

:Enables AUX in source selection.;

: 20minutes;

:Starts upgrading the firmware.; NO:Cancels (upgrading is not

:Resets the settings to default (except the stored station).;

:Cancels

40M

: 40minutes;

MIX

:Memorizes one station for each preset

OFF

:Deactivates.

OFF

:Disables.

( 9)

60M

: 60minutes;

– – –

XX

:Cancels

4

ENGLISH

GETTING STARTED

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

ESPANOL

ON

:The clock time is shown on the display even when the unit

is turned off.;

Select the display language for
information if applicable.
By default,

OFF

[ENGLISH]

:Cancels.

is selected.

[FUNCTION]

RADIO

menu and music

Change the crossover type

Press repeatedly to enter STANDBY.

1
2 Press and hold number buttons 4 and 5 to enter crossover

select.

The current crossover type appears.

3 Turn the volume knob to select “2WAY” or “3WAY”, then

press the knob.

4 Turn the volume knob to select “YES” or “NO”, then press

the knob.

The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings,

.

( 17, 18)

.

Caution

Select a crossover type according to how the speakers are
connected.
If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

( 26)

Search for a station

1

Press repeatedly to select TUNER.

2 Press repeatedly to select FM1/FM2/FM3/MW/LW.
3 Press S/T to search for a station.

• To change the searching method for S/T: Press repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6).

Other settings

1

Press the volume knob to enter

2 Turn the volume knob to select an item

[FUNCTION]

.

( 6)

, then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

5

RADIO

Default:

TUNER SETTING

LOCAL SEEK

AUTO
MEMORY

MONO SET

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH1 Turn the volume knob to select the available Program Type, then press

CLOCK

TIME SYNC

ON

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.;

NO

:Cancels.

•

Selectable only if

ON

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

: The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;

the knob.

2

Turn the volume knob to select the PTY language (

GERMAN

3

Press S/T to start searching.

ON

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

[NORMAL]

OFF

:Cancels.

OFF

:Cancels.

), then press the knob.

is selected for

OFF

OFF

: Cancels.

[PRESET TYPE]. ( 4)

:Cancels.

ENGLISH/FRENCH

XX

Available Program Type for

SPEECH : NEWS, AFFAIRS, INFO

CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL
RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC

:

POP M

(music),

CLASSICS, OTHER M
OLDIES, FOLK M

The unit will search for the Program Type categorized under

[MUSIC]

if selected.

•

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news
bulletin, the adjusted volume is memorized automatically. It will be
applied the next time traffic information or news bulletin is turned on.

/

[PTY SEARCH]

(information),

ROCK M

(music),

(music)

SPORT, EDUCATE, DRAMA

(music),

EASY M

JAZZ, COUNTRY, NATION M

(music),

LIGHT M

(music),

,

(music),

[SPEECH]

,

or

is

6

ENGLISH

USB/iPod/ANDROID

Start playback

The source changes automatically and playback
starts.

USB input terminal

USB

CA-U1EX (max.: 500mA)
(optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional

1

*

accessory)
iPod/iPhone

ANDROID

Micro USB 2.0 cable
(commercially available)

1

*

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

2

*

Do not leave the cable inside the car when not using.

or accessory of the

2

*

3

*

2

*

To On the faceplate

Playback/pause Press .

4

Reverse/Fast-forward

Select a file

Select a folder

Repeat play

*

Random play

*

Press and hold S/T.

Press S/T.

5

*

6

6

*

Press J/K.
Press repeatedly.

FILE REPEAT/FOLDER REPEAT/ALL REPEAT
FILE REPEAT/FOLDER REPEAT/REPEAT OFF

Press repeatedly.

FOLDER RANDOM/RANDOM OFF

: MP3/WMA/AAC/WAV/FLAC file, iPod or

: MP3/WMA/AAC/WAV/FLAC file
: iPod or ANDROID

ANDROID

7

Press and hold

3

*

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions

to select

ALL RANDOM

*

.

to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device
before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

4

*

For ANDROID: Applicable only when

5

*

Only for MP3/WMA/AAC/WAV/FLAC files. This does not work for iPod/ANDROID.

6

*

For iPod/ANDROID: Applicable only when

7

*

Only for MP3/WMA/AAC/WAV/FLAC files.

[BROWSE MODE]

is selected.

[MODE OFF]/[BROWSE MODE]

( 8)

is selected.

( 8)

ENGLISH

7

USB/iPod/ANDROID

Select control mode

While in iPod USB source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

MODE OFF

While in ANDROID source, press 5 repeatedly.

BROWSE MODE

HAND MODE

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage

• Selected drive of a multiple drives device.

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

For iPod/ANDROID, applicable only when
selected.

pause, file skip, fast-forward or reverse from this unit.

: Control iPod from this unit.

: Control Android device from this unit via KENWOOD

MUSIC PLAY application installed in the Android device.

: Control Android device using the Android device itself via

other media player applications installed in the Android
device. However, you can still play/pause and file skip from
this unit.

Select music drive

Class).

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

Select a file from a folder/list

[MODE OFF]/[BROWSE MODE]

is

1 Press .
2 Turn the volume knob to select a folder/list, then press the knob.
3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

Press S/T to search at a preset skip search ratio.

( 9, [SKIP SEARCH])

• Pressing and holding S/T searches at a 10% ratio.

Alphabet search

You can search for a file according to the first character.

For iPod USB source

(applicable only for USB and ANDROID source)

(applicable only for iPod USB and ANDROID source)

(applicable only for iPod USB and ANDROID source)

1 Turn the volume knob quickly to enter character search.
2 Turn the volume knob to select the character.

• Select “
3 Press S/T to move to the entry position.

” to search for a character other than AtoZ, 0to9.

*

• You can enter up to 3characters.
4 Press the volume knob to start searching.

For ANDROID source

1 Press J/K to enter character search.
2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z)
_A_: Lower case letters (a to z)

-0-: Numbers (0 to 9)

: Character other than AtoZ, 0to9

***

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

BT AUDIO source.)

• To return to the previous setting item, press .

• To cancel, press and hold

.

(Not applicable for

8

ENGLISH

USB/iPod/ANDROID

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car
receiver’s operations from the iPhone/iPod (via USB input terminal).

Preparation:

Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit
<www.kenwood.com/cs/ce/>.

You can make the settings in the same way as connection via Bluetooth.

( 15)

AUX

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

Start listening

1

Connect a portable audio player (commercially available).

Auxiliary input jack

for

[SOURCE SELECT]. ( 4)

Portable audio
player

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press .

Default:

USB

MUSIC DRIVE DRIVE CHANGE

automatically and playback starts.
Repeat steps

SKIP SEARCH 0.5%/1%/5%/10%

the skip search ratio over the total files.

:The next drive (

1

to 3 to select the following drives.

[DRIVE 1]

to

[DRIVE 4]

: While listening to iPod USB or ANDROID source, selects

) is selected

3.5mm stereo mini plug with “L” shaped connector
(commercially available)

2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.

Set the AUX name

XX

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter
2 Turn the volume knob to select
3 Turn the volume knob to select

[FUNCTION]
[SYSTEM]
[AUX NAME SET]

.

, then press the knob.

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

DVD/PORTABLE/GAME/VIDEO/TV

5 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

9

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile (AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone
(supplied)

Microphone input jack

Adjust the
microphone angle

Secure using cord clamps (not
supplied) if necessary.

Pair and connect a Bluetooth device for the first time

1

Press to turn on the unit.

2 Search and select this unit model name (KMM-BT20*) on the Bluetooth device.

“PAIRING”

display.

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” appears on the

• For some Bluetooth devices, you may need to enter the Personal Identification Number

(PIN) code immediately after searching.

3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established automatically. “BT1” and/or

“BT2” on the display window lights up.

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even
if you reset the unit. To delete the paired device,

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at
any time.
However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and
switch between these five devices.

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect
the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

( 14)

13, [DEVICE DELETE]

.

Auto Pairing

When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing
request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
–

[AUTO PAIRING]

– KENWOOD MUSIC PLAY application is installed on the Android device

[BROWSE MODE]

is set to

[ON]. ( 14)

is selected.

( 8)

( 7)

and

10

ENGLISH

BLUETOOTH®

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

• The unit answers the call automatically if
selected time.

During a call:

• If you turn off the unit or detach the faceplate, the Bluetooth
connection is disconnected.

The following operations may differ or not available depending on the
connected phone.

To On the faceplate

First incoming call...

Answer a call

Reject a call

End a call

( 12)

Press
the number buttons (1 to 6).

Press

Press .

[AUTO ANSWER]

or the volume knob or one of

.

is set to a

To On the faceplate

While talking on the first incoming call...

Answer another incoming
call and hold the current
call

Reject another incoming
call

While having two active calls...

End current call and
activate held call

Swap between the
current call and held call

Adjust the phone volume

[00]

to

[35]

(Default:

Switch between hands-free
and private talk modes

[15]

Press

.

Press

Press

Press

Turn the volume knob during a call.

)

• This adjustment will not affect the
volume of the other sources.

Press

• Operations may vary according to the
connected Bluetooth device.

.

.

.

during a call.

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter
2 Turn the volume knob to select an item

[FUNCTION]

.

( 12)

, then press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

11

BLUETOOTH®

Default:

MIC GAIN –10

NR LEVEL –5

ECHO CANCEL –5

Answer incoming call automatically

Press to enter Bluetooth mode.

1
2 Turn the volume knob to select
3 Turn the volume knob to select
4 Turn the volume knob to select an item, then press the knob.

1

to

30

(in seconds)/

5 Press and hold to exit.

To return to the previous setting item, press .

Make a call

You can make a call from the call history, phonebook, or dialing the
number. Call by voice is also possible if your mobile phone has the
feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to

another phone.

“(Second device name)” appears.
2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

to

+10(–4

number increased.

to+5(0):Adjust the noise reduction level until the least noise is

being heard during a phone conversation.

to+5(0):Adjust the echo cancellation delay time until the least

echo is being heard during a phone conversation.

):The sensitivity of the microphone increases as the

[SETTINGS]

, then press the knob.

OFF

[AUTO ANSWER]

(default)

, then press the knob.

XX

CALL HISTORY

PHONE BOOK

NUMBER DIAL1 Turn the volume knob to select a number (0 to 9) or character

(Applicable only if the phone supports PBAP.)

1

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O” indicates call made, “M” indicates call
missed.

• Press

DISP

• “NO DATA” appears if there is no recorded call history.

2

Press the volume knob to call.

(Applicable only if the phone supports PBAP.)

1

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

• To select the desired first letter, turn the volume knob or press

S/T

Select “1” to search with numbers and select “

symbols.

2

Turn the volume knob to select a name, then press the knob.

3

Turn the volume knob to select a phone number, then press the knob

to call.

•

The phonebook of the connected phone is automatically transferred to

the unit when pairing.

•

Contacts are categorized as: HM (home), OF (office), MO (mobile), OT

(other), GE (general)

•

This unit can display only non-accent letters. (Accent letters such as “Ú”

is shown as “U”.)

(

, #, +).

2

Press

Repeat steps

3

Press the volume knob to call.

to change the display category (NUMBER or NAME).

, then press the knob.

S/T

to move the entry position.

1

and 2 until you finish entering the phone number.

*

), press

*

” to search with

J / K

.

12

ENGLISH

BLUETOOTH®

VOICE

BATT LOW

NO SIGNAL/LOW/MID/MAX*:Shows the strength of the current received signal.

*

Functionality depends on the type of the phone used.

Speak the name of the contact you want to call or the voice command
to control the phone functions.

recognition)

/

MID/FULL*:Shows the strength of the battery.

( Make a call using voice

Make a call using voice recognition

Press and hold to activate the voice recognition of the

1

connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of
iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode.
2 Turn the volume knob to select

[NUMBER DIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

, or

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select

and store a blank number.

[NUMBER DIAL]

in step 2

Make a call from memory

Press to enter Bluetooth mode.

1
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

Other settings

1

Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

AUDIO SELECT

DEVICE DELETE1 Turn the volume knob to select a device to delete, then press the knob.

PIN CODE EDIT
(0000)

Selects the phone or audio device to connect or disconnect.
“

*

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

•

You can only connect a maximum of two Bluetooth phones and one

Bluetooth audio device at any time.

2

Turn the volume knob to select

Changes the PIN code (up to 6 digits).

1

Turn the volume knob to select a number.

2

Press S/T to move the entry position.

Repeat steps

3

Press the volume knob to confirm.

1

and 2 until you finish entering the PIN code.

[YES]

or

[NO]

, then press the knob.

XX

ENGLISH

13

BLUETOOTH®

RECONNECT ON

AUTO PAIRING ON

INITIALIZE YES

Bluetooth test mode

You can check the connectivity of the supported profile between
the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

2 Search and select this unit model name (KMM-BT20*) on

the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)

PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold

14

ENGLISH

:The unit automatically reconnect when the last connected

Bluetooth device is within range.;

:The unit automatically pair supported Bluetooth device
(iPhone/iPod touch/Android device) when it is connected
through USB input terminal.Depending on the operating
system of the connected device, this function may not work. ;

OFF

:Cancels.

:Initializes all the Bluetooth settings (including stored

pairing, phonebook, and etc.).;

compatibility

OFF

:Cancels.

NO

:Cancels.

to turn off the unit.

BLUETOOTH — Audio

While in BT AUDIO
source, you can connect
to five Bluetooth audio
devices and switch
between these five
devices.

Audio player via Bluetooth

1

Press repeatedly to select BTAUDIO.

2 Operate the Bluetooth audio player to start playback.

To On the faceplate

Playback/pause

Select group or folder

Reverse/Forward skip

Reverse/Fast-forward

Repeat play Press

Random play Press and hold to select

Select a file from a folder/list Refer to “Select a file from a folder/list” on

Switch between connected
Bluetooth audio devices

*

Pressing the “Play” key on the connected device itself also causes switching of sound output from the

device.

Operations and display indications may differ according to their availability on the
connected device.

Press

Press J / K.

Press S/T.

Press and hold S/T.

ALL REPEAT, FILE REPEAT, REPEAT OFF

• Press

page 8.

Press 5.

.

repeatedly.

to select

*

RANDOM OFF

ALL RANDOM

.

.

BLUETOOTH®

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car
receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input
terminal) or Android smartphone (via Bluetooth).

Preparation:

Install the latest version of KENWOOD Remote application on your device
before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

1 Press the volume knob to enter

[FUNCTION]

.

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press .

Default:

REMOTE APP

SELECT

IOS YES

ANDROID YES

ANDROID LIST

*

Displayed only when

Select the device (IOS or ANDROID) to use the application.

:Selects iPhone/iPod to use the application via Bluetooth or connected via USB
input terminal.;
If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected
via USB input terminal) to activate the application.

•

The connectivity of the application will be interrupted or disconnected if:

– You change from iPod BT source to any playback source connected via the USB

– You change from iPod USB source to iPod BT source.

:Selects Android smartphone to use the application via Bluetooth.;

NO

: Cancels.

*:Selects the Android smartphone to use from the list.

input terminal.

[ANDROID]

NO

of

:Cancels.

[SELECT]

is set to

[YES]

.

STATUS

Shows the status of the selected device.

IOS CONNECTED

iPod connected via Bluetooth or USB input terminal.

IOS NOT CONNECTED
ANDROID CONNECTED

Android smartphone connected via Bluetooth.

ANDROID NOT CONNECTED

application.

: You are able to use the application using the iPhone/

: No IOS device is connected to use the application.

: You are able to use the application using the

: No Android device is connected to use the

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this
unit.

Press

• You can operate the iPod/iPhone in the same way as iPod/iPhone

XX

via USB input terminal.

• If you plug in an iPhone/iPod to the USB input terminal while
listening to iPodBT source, the source automatically change
to iPodUSB. Press
connected via Bluetooth.

repeatedly to select iPodBT.

( 7)

to select iPodBT if the device is still

ENGLISH

15

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter
2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.

To return to the previous setting item, press .

AUDIO CONTROL

SUB-W LEVEL

MANUAL EQ

BAND1 LEVEL

LEVEL

BASS EXTEND ON

BAND2 LEVEL
BAND13 LEVEL

Q FACTOR 1.35/1.50/2.00

PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER

BASS BOOST LV1/LV2/LV3/LV4/LV5

LOUDNESS LV1/LV2

SUBWOOFER SET ON

LEVEL –50

to

The sound elements (frequency level, tone level, Q factor) are preset into
each selection (

LEVEL–9

to
each source. (Before making an adjustment, select the source you want
to adjust.)

:Turns on the extended bass.;

to

LEVEL–9

to
each source. (Before making an adjustment, select the source you want
to adjust.)

a preset equalizer suitable to the music genre. (Select
settings made in

OFF

:Cancels.

:Selects your preferred low and high frequencies boost to

produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

[FUNCTION]

LEVEL +10 (LEVEL 0

BAND1 LEVEL

LEVEL +9 (LEVEL 0

LEVEL +9 (LEVEL 0

:Adjust the quality factor.

[MANUAL EQ]

): Adjusts the subwoofer output level.

to

BAND13 LEVEL

):Adjusts the level to memorize for

OFF

):Adjusts the level to memorize for

.)

:Selects your preferred bass boost level.;

.

:Cancels.

OFF

:Cancels.

Default:

).

: Selects

[USER]

to use the

OFF

:Cancels.

FADER

BALANCE L15

VOLUME OFFSET –15

SOUND EFFECT

XX

SOUND RECNSTR

(Sound
reconstruction)

SPACE ENHANCE

SND REALIZER LV1/LV2/LV3

STAGE EQ LOW/MID/HI

DRIVE EQ ON

SPEAKER SIZE

X’OVER

DTA SETTINGS

CAR SETTINGS

• For 2-way crossover:

[SWITCH PREOUT]

•

[SUB-W LEVEL]

(Not applicable if 3-way crossover is selected.)

R15

to

F15 (0

):Adjusts the rear and front speaker output balance.

to

R15 (0

):Adjusts the left and right speaker output balance.

to +6 (0):Preset the initial volume level of each source. (Before

adjustment, select the source you want to adjust.)

(Not applicable for TUNER source and AUX source.)

ON

:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;

(Not applicable for TUNER source.)

SML/MED/LRG

OFF

speakers.;

car or running noise of the tyres.;

Depending on the crossover type you have selected
crossover or 3-way crossover setting items will be shown.
By default, 2-way crossover type is selected.

For settings,

is set to

is selectable only if

:Virtually enhances the sound space.;

:Virtually makes the sound more realistic.;

:Cancels.

:Virtually adjust the sound position heard from the

OFF

:Cancels.

: Boosts the frequency to reduce the noise heard from outside the

18, 19, Digital Time Alignment settings

[SUB-W LEVEL]/[SUBWOOFER SET]

[SUB-W]. ( 4)

OFF

:Cancels.

OFF

[SUBWOOFER SET]

:Cancels.

( 5)

is selectable only if

is set to

[ON]

OFF

, 2-way

( 17,18)

.

:Cancels.

.

16

ENGLISH

AUDIO SETTINGS

Crossover settings

Below are the available setting items for 2-way crossover
and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for
optimum performance.

•

The frequency and slope settings are automatically set
for the crossover of the selected speaker.

•

When 2-way crossover is selected, if
for

[TWEETER]

of

[SPEAKER SIZE]

[FRONT], [REAR]

, the

[X ‘ OVER]

setting of the speaker is not

and

[NONE]

is selected

[SUBWOOFER]

for

available.

• When 3-way crossover is selected, if
for

[WOOFER]

of

[WOOFER]

[SPEAKER SIZE]

is not available.

, the

[NONE]

[X’OVER]

is selected

setting of

X ‘ OVER

• [FRQ]

/

[F - HPF FRQ]/[R - HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]

[LPF FRQ]

: Adjusts the crossover frequency for the

/

selected speakers (high pass filter or low pass filter).

If

[THROUGH]

is selected, all signals are sent to the

selected speakers.

•

[F - HPF SLOPE]/[R - HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE]
[LPF SLOPE]/[SLOPE]:

Selectable only if a setting other than

Adjusts the crossover slope.

[THROUGH]

/

is

selected for the crossover frequency.

• [SW LPF PHASE]/[PHASE]:

Selects the phase of the speaker

output to be in line with the other speaker output.

• [GAIN LEFT]/[GAIN RIGHT]/[F - HPF GAIN]/[R - HPF GAIN]
[SW LPF GAIN]/[GAIN]:

Adjusts the output volume of the

/

selected speaker.

2-way crossover setting items

SPEAKER SIZE

FRONT SIZE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9
7×10

TWEETER

SMALL/MIDDLE/LARGE/NONE

(not connected)

REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE

(not connected)

1

SUBWOOFER

*

16CM/20CM/25CM/30CM/38CM OVER/NONE

(not connected)

X ' OVER

TWEETER FRQ

GAIN LEFT

GAIN RIGHT

FRONT HPF F - HPF FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ/12.5KHZ

–8

to

0

–8

to

0

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ
180HZ/220HZ/250HZ/THROUGH

F - HPF SLOPE

F - HPF GAIN

–6DB/–12DB/–18DB/–24DB

–8

to

0

REAR HPF R - HPF FRQ

R - HPF SLOPE

FRONT HPF

settings above.)

(Refer

R - HPF GAIN

SUBWOOFER

1

*

LPF

1

*

Selectable only when

SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ/150HZ

180HZ/220HZ/250HZ/THROUGH

SW LPF SLOPE

SW LPF PHASE

SW LPF GAIN –8

[SWITCH PREOUT]

–6DB/–12DB/–18DB/–24DB

REVERSE

(180°)/

NORMAL

(0°)

to

0

is set to

[SUB-W] ( 4)

and

[SUBWOOFER SET]

is set to

( 16)

ENGLISH

[ON]

/

/

/

.

17

AUDIO SETTINGS

3-way crossover setting items

SPEAKER SIZE

TWEETER

MID RANGE

WOOFER

SMALL/MIDDLE/LARGE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9

2

*

16CM/20CM/25CM/30CM/38CM OVER/NONE

X ' OVER

TWEETER

HPF FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ
10KHZ/12.5KHZ

SLOPE

PHASE

–6DB/–12DB

REVERSE

GAIN –8

MID RANGE

HPF FRQ

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ
120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

HPF SLOPE

LPF FRQ

–6DB/–12DB

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ
10KHZ/12.5KHZ/THROUGH

LPF SLOPE

PHASE

–6DB/–12DB

REVERSE

GAIN –8

2

*

WOOFER

LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ

120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

SLOPE

PHASE

–6DB/–12DB

REVERSE

GAIN –8

2

*

Selectable only when

[SUBWOOFER SET]

Digital Time Alignment settings

Digital Time Alignment sets the delay time of the speaker output to
create a more suitable environment for your vehicle.

• For more information,

19, Determining the value for [DISTANCE] and [GAIN]

of [DTA SETTINGS].

(not connected)

DTA SETTINGS

POSITION

/

(180°)/

NORMAL

(0°)

to

0

DISTANCE 0CM

/

GAIN –8DB

Selects your listening position (reference point).

ALL

:Not compensating;

FRONT LEFT

• [FRONT ALL]

(

5)

to

610CM

FRONT RIGHT:

:Front left seat;

is displayed only when

FRONT ALL

Front right seat;

:Front seat

[2-WAY X’OVER]

:Fine adjust the distance to compensate. (Before

making an adjustment, select the speaker you want to adjust.)

to

0DB

:Fine adjust the output volume of the selected speaker.

is selected.

(Before making an adjustment, select the speaker you want to adjust.)

DTA RESET YES

/

CAR SETTINGS

(180°)/

NORMAL

(0°)

to

0

CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV

/

R-SP LOCATION

:Resets the settings (

[POSITION]

to default.; NO:Cancels.

[DISTANCE]

and

[GAIN]

) of the selected

Identify your car type and rear speaker location in order to make the
adjustment for

[DTA SETTINGS]

.

/

MINIVAN(LONG)

:Selects the type of vehicle.;

OFF:

Not

compensating.

Selects the location of the rear speakers in your vehicle to calculate the
furthest distance from the listening position selected (reference point).

• DOOR/REAR DECK

(180°)/

NORMAL

(0°)

to

0

is set to

[ON]. ( 16)

[OFF], [COMPACT], [FULL SIZE CAR], [WAGON]

• 2ND ROW/3RD ROW

as

[MINIVAN]

:Selectable only when

:Selectable only when

or

[MINIVAN(LONG)]

.

[CAR TYPE]

or

[CAR TYPE]

is selected as

[SUV]

.

is selected

18

ENGLISH

AUDIO SETTINGS

•

Before making an adjustment for

want to adjust:
When 2-way crossover is selected:

FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER

– You can only select

selected for

[REAR]

When 3-way crossover is selected:

TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER

– You can only select

[SPEAKER SIZE]. ( 18)

• [R-SP LOCATION]

– 2-way crossover is selected.
– A setting other than

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

of

[DISTANCE]

and

[REAR LEFT], [REAR RIGHT]

and

[SUBWOOFER]

[WOOFER]

[CAR SETTINGS]

[NONE]

of

[SPEAKER SIZE]. ( 17)

if a setting other than

is selectable only if:

( 5)

is selected for

[REAR]

If you specify the distance from the center of the currently
set listening position to every speaker, the delay time will be
automatically computed and set.

1

Determine the center of the currently set listening position

as the reference point.

2

Measure the distances from the reference point to the

speakers.

3

Calculate the differences between the distance of the

furthest speaker (rear speaker) and other speakers.

4

Set the

speakers.

5

Adjust

Example: When
position

[GAIN]

of

[DTA SETTINGS]

and

[SUBWOOFER]

[NONE]

is selected for

of

[SPEAKER SIZE]. ( 17)

[DISTANCE]

[GAIN]

calculated in step 3 for individual

for individual speakers.

[FRONT ALL]

, select the speaker you

if a setting other than

[WOOFER]

of

is selected as the listening

[NONE]

DISPLAY SETTINGS

Set the dimmer

Press and hold DISP (DIMMER) to turn on or off the dimmer.

• If you have set

is

press and hold this button.

Other settings

1

Press the volume knob to enter

2 Turn the volume knob to select an item (see the

following table), then press the knob.

3 Repeat step 2 until the desired item is selected/activated

or follow the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

DISPLAY

DIMMER

BRIGHTNESS 0

TEXT SCROLL AUTO/ONCE

[DIMMER TIME]

Dim the display illumination.

ON

:Dimmer is turned on.;

DIMMER TIME

1

Turn the volume knob to adjust the

the knob.

2

Turn the volume knob to adjust the

the knob.

(Default:

to 31: Select your preferred brightness level for display

illumination.

automatically, or scroll only once.;

, it will be canceled once you

[FUNCTION]

OFF

:Set the dimmer on and off time.

[ON]: 18:00; [OFF]: 6:00

:Select whether to scroll the display information

:Cancels.

)

OFF

[ON]

[OFF]

:Cancels.

.

Default:

time, then press

time, then press

XX

ENGLISH

19

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING
THEN PWR ON” appears.

“PROTECTING SEND SERVICE”
appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit.

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not
correct.

“LOADING” appears when you
enter search mode by pressing

.

Correct characters are not

USB/iPod

displayed (e.g. album name).

“NA FILE” Make sure the media contains supported audio files.

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors.

Connect the antenna firmly.

This is caused by how the files are recorded.

This unit is still preparing the iPod/iPhone music list.
It may take some time to load, try again later.

•

This unit can only display uppercase letters,

numbers, and a limited number of symbols.

•

Depending on the display language you have

selected
displayed correctly.

( 22)

( 22)

( 3)

( 5)

, some characters may not be

Symptom Remedy

“READ ERROR” Copy the files and folders onto the USB device again. If this

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

“UNSUPPORTED DEVICE”
appears.

USB/iPod

“UNRESPONSIVE DEVICE”
appears

“USB HUB IS NOT
SUPPORTED” appears.

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Sound cannot be heard

during playback.

•

Sound output only

from the Android
device.

ANDROID

does not solve the problem, reset the USB device or use
another USB device.

•

Check whether the connected device is compatible with

this unit and ensure the file systems are in supported
formats.

( 22)

•

Reattach the device.

Make sure the device is not malfunction and reattach the
device.

This unit cannot support a USB device connected via a
USB hub.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in

[HAND MODE]

application on the Android device and start playback.

•

If in

[HAND MODE]

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected

Android device is unable to route the audio signal to
unit.

( 22)

, launch any media player

, relaunch the current media player

20

ENGLISH

TROUBLESHOOTING

Symptom Remedy

Cannot playback at

[BROWSE MODE]

“NO DEVICE” or
“READING” keeps

ANDROID

flashing.

Playback is intermittent
or sound skips.

“ANDROID ERROR”/
“NADEVICE”

No Bluetooth device is
detected.

Bluetooth pairing
cannot be made.

Echo or noise is heard
during a phone

Bluetooth®

conversation.

Phone sound quality
is poor.

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device.

.

•

Reconnect the Android device and select the appropriate

control mode.

•

If this does not solve the problem, the connected Android

device does not support

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

•

Search from the Bluetooth device again.

•

Reset the unit.

•

Make sure you have entered the same PIN code to both

the unit and Bluetooth device.

•

Delete pairing information from both the unit and the

Bluetooth device, then perform pairing again.

•

Adjust the microphone unit’s position.

•

Check the

•

Reduce the distance between the unit and the Bluetooth

device.

•

Move the car to a place where you can get a better signal

reception.

( 7)

( 3)

[ECHO CANCEL]

[BROWSE MODE]. ( 22)

[BROWSE MODE]. ( 22)

( 10)

( 10)

setting.

( 12)

Symptom Remedy

Voice calling method is
not successful.

Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.

The connected Bluetooth
audio player cannot be
controlled.

“DEVICE FULL” The number of registered devices has reached its limit.

Bluetooth®

“N/A VOICE TAG” Make sure the same voice as the registered voice tag is

“NOT SUPPORT” The connected phone does not support Voice Recognition

“NO ENTRY”/“NO PAIR” There is no registered device connected/found via

“ERROR” Try the operation again. If “ERROR” appears again, check if

“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.

“HF ERROR XX”/
“BT ERROR”

•

Use voice calling method in a more quiet environment.

•

Reduce the distance from the microphone when you

speak the name.

•

Make sure the same voice as the registered voice tag is

used.

•

Reduce the distance between the unit and the Bluetooth

audio player.

•

Turn off, then turn on the unit and try to connect again.

•

Other Bluetooth devices might be trying to connect to the

unit.

•

Check whether the connected Bluetooth audio player

supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)

•

Disconnect and connect the Bluetooth player again.

Retry after deleting an unnecessary device.

DEVICE DELETE)

used.

feature or phonebook transfer.

Bluetooth.

the device supports the function you have tried.

Reset the unit and try the operation again. If this does not
solve the problem, consult your nearest service center.

( 13,

ENGLISH

21

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently
with a cotton swab, being careful not to damage
the connector.

More information

For: – Latest firmware updates and latest compatible item list

– KENWOOD original application
– Any other latest information

Visit <www.kenwood.com/cs/ce/>.

Playable files

•

Playable audio file for USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac),

WAV (.wav), FLAC (.flac)

•

Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible
depending on the types or conditions of media or device.
AAC files encoded in (.m4a) format by iTunes cannot be played on this unit.

•

For detailed information and notes about the playable audio files, visit

<www.kenwood.com/cs/ce/audiofiles>.

About USB devices

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1.5A.

Connector (on the reverse
side of the faceplate)

About iPod/iPhone

•

Via USB:

Made for
– iPod touch (5th and 6th generation)
– iPod nano (7th generation)
– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE

•

Via Bluetooth:

Made for
– iPod touch (5th and 6th generation)
– iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

•

Depending on the version of the operating system of the iPod/iPhone, some functions may

not operate on this unit.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

About Bluetooth

•

Depending on the Bluetooth version of the device, some Bluetooth devices may not be able

to connect to this unit.

•

This unit may not work with some Bluetooth devices.

•

Signal conditions vary, depending on the surroundings.

22

ENGLISH

REFERENCES

Change the display information

Each time you press

•

If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other

information (eg. station name, playing time) appears.

Source name Display information

STANDBY Source name

TUNER Frequency

USB

iPod USB/
iPodBT or
ANDROID

BT AUDIO Music title/Artist

AUX Source name

DISP

, the display information changes.

Clock (back to the beginning)

Clock (back to the beginning)

(For FM Radio Data System stations only)

Station name Radio text Radio text+ Title/Artist
Frequency

(For MP3/WMA/AAC/WAV/FLAC files)

Track title/Artist Album title/Artist Folder name
File name

When
Music title/Artist
Clock

Clock

Clock (back to the beginning)

Playing time Clock (back to the beginning)

[MODE OFF]/[BROWSE MODE]

Album title/Artist Playing time

(back to the beginning)

Album title/Artist Playing time

(back to the beginning)

Clock (back to the beginning)

is selected

( 8)

:

SPECIFICATIONS

FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity (DINS/N=46dB) 2.0μV/75Ω

Frequency Response (±3dB) 30 Hz — 15 kHz

Signal-to-Noise Ratio (MONO) 64 dB

Tuner

Stereo Separation (1kHz) 40dB

MW

Frequency Range 531kHz — 1611kHz (9kHz space)

(AM)

Usable Sensitivity (S/N=20dB) 28.2μV

LW

Frequency Range 153kHz — 279kHz (9kHz space)

(AM)

Usable Sensitivity (S/N=20dB) 50.0μV

USB Standard USB1.1, USB2.0 Full Speed

File System FAT12/16/32

Maximum Supply Current DC5V

Frequency Response (±1dB) 20Hz — 20kHz

Signal-to-Noise Ratio (1kHz) 105 dB

Dynamic Range 90dB

USB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

AAC Decode AAC-LC “.aac” files

WAV Decode Linear-PCM

FLAC Decode FLAC file (Up to 48kHz/24bit)

1.5A

ENGLISH

23

SPECIFICATIONS

Version Bluetooth 3.0

Frequency Range 2.402GHz — 2.480GHz

Output Power +4dBm (MAX), 0dBm (AVE) Power Class 2

Maximum Communication
Range

Bluetooth

Profile HFP 1.6 (Hands-Free Profile)

Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Auxiliary

Input Impedance 30kΩ

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Band 1: 62.5Hz±9dB

Audio

Line of sight approx. 10m (32.8ft)

A2DP (Advanced Audio Distribution Profile)
AVRCP 1.5 (Audio/Video Remote Control Profile)
SPP (Serial Port Profile)
PBAP (Phonebook Access Profile)

Band 2: 100Hz±9dB
Band 3: 160 Hz±9dB
Band 4: 250 Hz±9dB
Band 5: 400 Hz±9dB
Band 6: 630Hz±9dB
Band 7: 1kHz±9dB
Band 8: 1.6kHz±9dB
Band 9: 2.5kHz±9dB
Band 10: 4kHz±9dB
Band 11: 6.3kHz±9dB
Band 12: 10kHz±9dB
Band 13: 16kHz±9dB

Preout Level/Load (CD) 2500mV/10kΩ

Audio

Preout Impedance ≤600Ω

Operating Voltage 14.4V (10.5V—16V allowable)

Maximum Current Consumption 10A

Operational Temperature Range –10°C—+60°C

General

Installation Size (W×H×D) 182mm×53mm×114mm

Net Weight (includes Trimplate,
Mounting Sleeve)

Subject to change without notice.

0.7kg

24

ENGLISH

INSTALLATION/CONNECTION

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car

chassis or Ground wire (black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the

car audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal

parts of this unit during and shortly after use of the unit. Metal parts such
as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal,

connect Ignition wire (red) to the terminal on the vehicle’s fuse box
which provides 12 V DC power supply and is turned on and off by the
ignition key.

•

Keep all cables away from heat dissipate metal parts.

•

After the unit is installed, check whether the brake lamps, blinkers,

wipers, etc. on the car are working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis,

then replace the old fuse with one that has the same rating.

Basic procedure

1

Remove the key from the ignition switch, then disconnect the

[

terminal of the car battery.

2

Connect the wires properly.

See Wiring connection.

3

Install the unit to your car.

See Installing the unit (in-dash mounting).

4

Connect the [ terminal of the car battery.

5

Press to turn on the power.

6

Detach the faceplate and reset the unit.

( 26)

( 3)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim
plate as illustrated
before fitting.

How to remove the unit

1

Detach the faceplate.

2

Remove the trim plate.

3

Insert the extraction keys deeply into the slots on each side,

then follow the arrows as shown on the illustration.

Part list for installation

(A)

Faceplate

(B)

Trim plate

(C)

Mounting
sleeve

Do the required
wiring.

( 26)

Dashboard of
your car

Bend the appropriate tabs to hold the
mounting sleeve firmly in place.

(D)

Wiring harness

(E)

Extraction
key

ENGLISH

25

INSTALLATION/CONNECTION

Wiring connection

If your car does not have an ISO terminal:

We recommend installing the unit with a commercially available custom
wiring harness specific for your car and leave this job to professionals for
your safety. Consult your car audio dealer.

Connecting the ISO connectors on some VW/Audi or Opel
(Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as
illustrated below.

A7 (Red) Ignition wire (Red)

A4 (Yellow)

Pin

A4 Yellow
A5 Blue/White
A7 Red
A8 Black

B1

Purple

B2

Purple/black

B3

]

Gray

B4

Gray/black

B5

White

]

B6

White/black

B7

Green

]

B8

Green/black

Default wiring

Color and function (for ISO connectors)

:

Battery

:

Power control

:

Ignition (ACC)

:

Earth (ground) connection

]

Rear speaker (right)

:

For 3-way crossover: Tweeter (right)

[

Front speaker (right)

:

For 3-way crossover: Mid range speaker (right)

[

Front speaker (left)

:

For 3-way crossover: Mid range speaker (left)

[

Rear speaker (left)

:

For 3-way crossover: Tweeter (left)

[

Battery wire (Yellow)

When connecting to an external amplifier,

Rear/Subwoofer output
For 3-way crossover: Woofer output

connect its ground wire to the car’s chassis to
avoid damaging the unit.

Antenna terminal

Fuse (10A)

Microphone input jack

UnitVehicle

Yellow (Battery wire)

Red (Ignition wire)

If no connections are made, do not let the wire come out from
the tab.

Light blue/yellow
(Steering remote

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

( 10)

To the steering wheel remote control
adapter

control wire)

Red (A7)

Yellow (A4)

Blue/White
(Power control wire/

Antenna control wire)

Brown
(Mute control wire)

ANT CONT

P. CONT

MUTE

To the power control terminal when
using the optional power amplifier
or to the antenna control terminal in
the vehicle

To connect the Kenwood navigation
system, refer your navigation
manual

ISO connectors

26

ENGLISH