Kenwood KMM-205 User manual

KMM-BT305 KMM-BT205

DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

ЦИФРОВОЙ МЕДИА-РЕСИВЕР

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

DIGITALE MEDIAONTVANGER

GEBRUIKSAANWIJZING

RICEVITORE MULTIMEDIALE DIGITALE

ISTRUZIONI PER L’USO

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen (particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale huishoudelijke afval mogen. Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op de juiste manier worden verwerkt, teruggewonnen en hergebruikt. Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking van afval. Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti insieme ai normali rifiuti di casa. I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in grado di trattare questi prodotti e di smaltirne i loro componenti. Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all’ambiente. Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

For Israel

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C Влажность : от 0% до 90%

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU)

Fabrikant:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Nederland

Dichiarazione di conformità alla Direttiva RE 2014/53/EU Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

English

Hereby, JVCKENWOOD declares that the radio equipment “KMM-BT305/KMM-BT205” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio «KMM-BT305/KMM-BT205 » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KMM-BT305/ KMM-BT205” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KMM-BT305/ KMM-BT205” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KMM-BT305/KMM-BT205” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “KMM-BT305/KMM-BT205” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KMM-BT305/KMM-BT205” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KMM-BT305/ KMM-BT205” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KMM-BT305/KMM-BT205” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KMM-BT305/KMM-BT205“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “KMM-BT305/ KMM-BT205” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “KMM-BT305/ KMM-BT205” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internet-osoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema » KMM-BT205

« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KMM-BT305/KMM-BT205“ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

KMM-BT305/

iii

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “KMM-BT305/ KMM-BT205” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KMM-BT305/KMM-BT205» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „KMM-BT305/KMM-BT205“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „KMM-BT305/ KMM-BT205” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „KMM-BT305/ KMM-BT205“ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju “KMM-BT305/ KMM-BT205” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “KMM-BT305/ KMM-BT205” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “KMM-BT305/KMM-BT205” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “KMM-BT305/KMM-BT205” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KMM-BT305/KMM-BT205” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «KMM-BT305/KMM-BT205» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KMM-BT305/KMM-BT205» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User's use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment, provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

Important Notice concerning the Software

-jansson Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"),

to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/ or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

-CMP The MIT License (MIT)

CONTENTS

BEFORE USE 2 BASICS 3 GETTING STARTED 4

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

RADIO 6 USB/iPod/ANDROID 7 Spotify 10 AUX 11 BLUETOOTH® 11 AUDIO SETTINGS 18 DISPLAY SETTINGS 23 REFERENCES 24

Maintenance More information

TROUBLESHOOTING 27 INSTALLATION/

CONNECTION 29 SPECIFICATIONS 32

BEFORE USE

IMPORTANT

• To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warnings and Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

• USB rating is indicated on the main unit. To view, detach the faceplate. (Page 3)

• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected (page 31). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

• Operations are explained mainly using buttons on the faceplate of .

• English indications are used for the purpose of explanation. You can select the display language from the [FUNCTION] menu. (Page 5)

• [XX] indicates the selected items.

• (Page XX) indicates references are available on the stated page.

ENGLISH

BASICS

Faceplate

Attach

Volume knob

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly. (Page 25)

Display window

Press B SRC.

• Press and hold to turn off the power.

Press B SRC repeatedly.

Lights up when Bluetooth connection is established. (Page 12)

Detach

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[YES]

, see page 5), the display shows: “SEL LANGUAGE” “PRESS”

“VOLUME KNOB”

1 Turn the volume knob to select

[SP]

(Spanish) or

[EN]

is selected for the initial setup.

[FR]

(French), then press the knob.

[EN]

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob again.

[YES]

is selected for the initial setup.

3 Press the volume knob again. “DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type” on page 5.

Set the clock and date

Press the volume knob to enter

1 2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select

[FUNCTION] [CLOCK]

[CLOCKADJUST]

[FACTORY RESET]

(English),

[RU]

(Russian),

, then press the knob.

is set to

4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select 6 Turn the volume knob to select

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select

[CLOCK FORMAT] [12H]

[24H]

[DATEFORMAT] [DD/MM/YY]

[DATESET]

, then press the knob.

[MM/DD/YY]

, then press

10 Turn the volume knob to make the settings, then press the knob. Day Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press

Set the initial settings

Press B SRC repeatedly to enter STANDBY.

1 2 Press the volume knob to enter

[FUNCTION]

3 Turn the volume knob to select an item (see the following table), then

press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press

[AUDIO CONTROL]

[SWITCH PREOUT]

(For : Applicable only if [X’OVER] is set to [2WAY].) (Page 5) [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). (Page 32)

Default: [XX]

ENGLISH

GETTING STARTED

[DISPLAY]

[EASY MENU]

[TUNER SETTING]

[PRESET TYPE]

[SYSTEM]

[KEY BEEP]

[SOURCE SELECT]

[SPOTIFY SRC]

[BUILT-IN AUX]

[P-OFF WAIT]

[F/W UPDATE]

[UPDATE SYSTEM]

[F/W UP xxxx]

(For ) When entering [FUNCTION]...

[ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 23)

• [ZONE 2] illumination changes to light blue color when you enter [FUNCTION], irregardless of the [EASY MENU] setting.

• Refer to the illustration on page 23 for zone identification.

[NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset button, regardless of the selected band.

(Applicable only if [X’OVER] is set to [2WAY].)

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables.

(Page 10)

[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 11)

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [–––]: Cancels

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not

activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

[FACTORY RESET] [YES]: Resets the settings to default (except the stored station). ;

[CLOCK]

[CLOCK DISPLAY]

[ENGLISH]

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[NO]: Cancels.

[ON]: The clock time is shown on the display even when the unit is turned

off. ; [OFF]: Cancels.

Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected.

Change the crossover type

Press B SRC repeatedly to enter STANDBY.

1 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob. The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings, see page 20.

Caution:

Select a crossover type according to how the speakers are connected. (Page 31, 32) If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

ENGLISH

RADIO

• “ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

Search for a station

Press B SRC repeatedly to select RADIO.

1 2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW. 3 Press S / T to search for a station.

You can store up to 18 stations for FM and 6 stations for MW/LW.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station: Press one of the number buttons (1 to 6).

Other settings

Press the volume knob to enter

1 2 Turn the volume knob to select an item (see the right column), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[FUNCTION]

[TUNER SETTING]

[SEEK MODE]

[LOCAL SEEK]

[AUTO MEMORY]

[MONO SET]

[NEWS SET]

[REGIONAL]

[AF SET]

[TI]

[PTY SEARCH]

Default: [XX]

Selects the searching method for [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.

[ON]: Searches only stations with good reception. ; [OFF]: Cancels.

• Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again.

[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)

[ON]: Improves the FM reception, but the stereo effect will be lost. ; [OFF]: Cancels.

[ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels.

[ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.

[ON]: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels.

[ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up) while listening to all sources except in MW/LW. ; [OFF]: Cancels.

Turn the volume knob to select the available Program Type (page 7),

then press the knob.

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

Press S / T to start searching.

S / T

buttons when pressed.

ENGLISH

RADIO USB/iPod/ANDROID

[CLOCK]

[TIME SYNC]

• [

LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

Available Program Type for [PTY SEARCH] [SPEECH]

[MUSIC]

: (music), (music),

The unit will search for the Program Type categorized under

[MUSIC]

if selected.

[ON]: Synchronizes the unit’s time to the Radio Data System station time. ; [OFF]: Cancels.

[NEWS], [AFFAIRS], [INFO] [CULTURE], [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN] [SOCIAL], [RELIGION], [PHONE IN], [TRAVEL], [LEISURE], [DOCUMENT] [POP M]

(music),

[CLASSICS], [OTHER M] [OLDIES], [FOLK M]

[ROCK M]

(information),

(music),

[EASY M]

(music),

(music)

[SPORT], [EDUCATE], [DRAMA]

(music),

[JAZZ], [COUNTRY], [NATION M]

[LIGHT M]

[SPEECH]

Start playback

The source changes automatically and playback starts.

USB input terminal

USB

CA-U1EX (max.: 500 mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

ANDROID*3

USB cable*2 (commercially available)

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used. *3 You can control Android device using the Android device itself via other media player

application installed in the Android device.

ENGLISH

USB/iPod/ANDROID

To On the faceplate

Play back/pause

Reverse/Fast-forward*4

Select a file

Select a folder*5 Press 2

Repeat play*4*6 Press 4

Random play*4*6 Press 3

*4 Not applicable for ANDROID. *5 This does not work for iPod/ANDROID. *6 For iPod: Applicable only when [MODE OFF] is selected. (Page 9)

Press 6 IW.

Press and hold S / T.

Press S / T.

/ 1 .

repeatedly.

[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT]

MP3/WMA/AAC/WAV/FLAC file

[FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF]

repeatedly.

[FOLDERRANDOM]/[RANDOM OFF]

MP3/WMA/AAC/WAV/FLAC file or iPod

Press and hold 3

to select

[ALL RANDOM]

: iPod

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drive device.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android Smartphone (via Bluetooth).

• For KENWOOD Remote application is connected.

Preparation:

• Install the latest version of KENWOOD Remote application on your device before connecting.

• For more information, visit <www.kenwood.com/cs/ce/>.

You can make the settings in the same way as connection via Bluetooth. (Page 17)

, “R.APP” indicator on the display window lights up when

Listen to TuneIn Radio/TuneIn Radio Pro

While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPod/ iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

ENGLISH

USB/iPod/ANDROID

Select control mode

While in iPodUSB source (or iPodBT source), press 5 repeatedly.

[MODE ON]

: Control iPod using the iPod itself. However, you can still perform

[MODE OFF]

For iPod, applicable only when

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

play/pause, file skip, fast-forward or fast-reverse from this unit.

: Control iPod from this unit.

Select a file from a folder/list

[MODE OFF]

is selected.

Quick search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip search

Press S / T to search at a preset skip search ratio.

• Pressing and holding S / T searches at a 10% ratio.

Alphabet search

You can search for a file according to the first character.

(applicable only for USB source)

(applicable only for iPod USB source or iPod BT source)

(applicable only for iPodUSB source or iPod BT source)

1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

• Select “ 3 Press S / T to move to the entry position.

” to search for a character other than A to Z, 0 to 9.

• You can enter up to 3 characters. 4 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5. (Not applicable for BT AUDIO source.)

• To return to the previous setting item, press

• To cancel, press and hold

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[USB]

[MUSIC DRIVE] [DRIVE CHANGE]: The next drive ([DRIVE 1] to [DRIVE 4]) is selected

[SKIP SEARCH]

automatically and playback starts. Repeat steps 1 to 3 to select the following drives.

[0.5%]/[1%]/[5%]/[10%]: While listening to iPod USB source (or iPod BT source), selects the skip search ratio over the total files.

Default: [XX]

ENGLISH

Spotify

Preparation:

Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

[SOURCE SELECT]

. (Page 5)

To On the faceplate

Random play*5 Press 3 repeatedly *3.

[SHUFFLE ON], [SHUFFLEOFF]

Start listening

Start up the Spotify application on your device.

1 2 Connect your device to the USB input terminal.

USB input terminal

KCA-iP102/KCA-iP103 (optional accessory)*1 or accessory of the iPod/iPhone*2

3 Press B SRC repeatedly to select SPOTIFY. Broadcast starts automatically

To On the faceplate

Play back/pause

Skip a track

Select thumbs up or thumbs down *4

Start radio Press and hold 5.

Repeat play*5 Press 4

ENGLISH

Press 6 IW.

Press S*3 / T.

/ 1 .

Press 2

repeatedly.

[REPEAT ALL], [REPEAT ONE]*3, [REPEATOFF]

*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not used. *3 Available for premium account users only. *4 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is

skipped.

*5 Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

Press .

1 2 Turn the volume knob to select a list type, then press the knob. The list types displayed differ depending on the information sent from

Spotify.

3 Turn the volume knob to select the desired song or station. 4 Press the volume knob to confirm. You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

AUX BLUETOOTH®

Preparation:

• Select

[ON]

for

[BUILT-IN AUX]

[SOURCESELECT]

. (Page 5)

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

Portable audio player

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press B SRC repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select

[FUNCTION] [SYSTEM] [AUX NAME SET]

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

[AUX]

(default)/

[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]

5 Press and hold to exit.

To return to the previous setting item, press

Connect the microphone

Microphone input jack

Adjust the microphone angle

Rear panel

Microphone (supplied)

Secure using cord clamps (not supplied) if necessary.

ENGLISH

BLUETOOTH®

Depending on the operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.

Pair and connect a Bluetooth device for the first time

Press B SRC to turn on the unit.

1 2 Search and select the name of your receiver (“KMM-BT3 ”/

“KMM-BT2 ”) on the Bluetooth device.

“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME

KNOB” appears on the display.

• For some Bluetooth devices, you may need to enter the Personal

Identification Number (PIN) code immediately after searching.

3 Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically.

•

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see

[DEVICE DELETE]

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time.

However, while in BT AUDIO source, you can connect to five Bluetooth

audio devices and switch between these five devices. (Page 16)

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

: “BT1” and/or “BT2” indicator on the faceplate lights up. : “BT1” and/or “BT2” on the display window lights up.

on page 15.

Auto Pairing

When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. –

[AUTO PAIRING]

is set to

[ON]

. (Page 15)

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

•

• The unit answers the call automatically if time. (Page 13)

During a call:

•

[DISPLAY]

• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.

: ZONE 2 illuminates in green color and flashes.

: ZONE 1 illuminates according to the settings made for

(page 23) and ZONE 2 illuminates in green color.

[AUTO ANSWER]

is set to a selected

ENGLISH

BLUETOOTH®

The following operations may differ or be unavailable depending on the connected phone.

To On the faceplate

First incoming call...

Answer a call

Reject a call

End a call

While talking on the first incoming call...

Answer another incoming call and hold the current call

Reject another incoming call

While having two active calls...

End current call and activate held call

Swap between the current call and held call

Adjust the phone volume*1

[00]

[35]

(Default:

[15]

)

Switch between hands-free and private talk modes*2

*1 This adjustment will not affect the volume of the other sources. *2 Operations may vary according to the connected Bluetooth device.

Press

or the volume knob or one of the

number buttons (1 to 6).

Press

Turn the volume knob during a call.

Press 6 IW during a call.

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[MIC GAIN] [–10] to [+10] ([–4]): The sensitivity of the microphone increases as the

[NR LEVEL]

[ECHO CANCEL]

number increases.

[–5] to [+5] ([0]): Adjust the noise reduction level until the least noise is being heard during a phone conversation.

[–5] to [+5] ([0]): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Default: [XX]

Make the setting for answering a call

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select 3 Turn the volume knob to select

[SETTINGS]

, then press the knob.

[AUTO ANSWER]

, then press the knob.

4 Turn the volume knob to select the time (in seconds) for the unit to

answer the call automatically, then press the knob.

[01]

[30]

, or select

[OFF]

to cancels. (Default:

[OFF]

)

5 Press and hold to exit.

To return to the previous setting item, press

ENGLISH

BLUETOOTH®

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode. “(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to the

other phone.

“(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[CALL HISTORY] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O“ indicates call made, “M” indicates call missed.

• Press DISP to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history or call number.

Press the volume knob to call.

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

[NUMBER DIAL]

[VOICE] Speak the name of the contact you want to call or the voice command to

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

• To select the desired first letter, turn the volume knob or press

/ T, then press the knob.

Select “1” to search with numbers and select “

symbols.

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• The phonebook of the connected phone is automatically transferred to the unit when pairing.

• Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú” are shown as “U”.)

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the phone number.

Press the volume knob to call.

control the phone functions. (See “Make a call using voice recognition” on page 15.)

), press

” to search with

2 /

ENGLISH

BLUETOOTH®

Make a call using voice recognition

Press and hold to activate the voice recognition of the connected

phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select

[NUMBERDIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.

To erase a contact from the preset memory, select and store a blank number.

[NUMBER DIAL]

in step 2

Make a call from memory

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. “NO MEMORY” appears if there is no contact stored.

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[BT MODE]

[PHONE SELECT]* Selects the phone or audio device to connect or disconnect.

[AUDIO SELECT]*

[DEVICE DELETE]

[PIN CODE EDIT] (0000)

[RECONNECT]

[AUTO PAIRING]

* You can only connect a maximum of two Bluetooth phones and one Bluetooth audio device at

any time.

“

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

Turn the volume knob to select a device to delete, then press the

knob.

Turn the volume knob to select [YES] or [NO], then press the knob.

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S / T to move the entry position.

Repeat steps 1 and 2 until you finish entering the PIN code.

Press the volume knob to confirm.

[ON]: The unit is automatically reconnected when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels.

[ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels.

Default: [XX]

ENGLISH

BLUETOOTH®

[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,

phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. 2 Search and select the name of your receiver (“KMM-BT3 ”/

“KMM-BT2 ”) on the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold B SRC to turn off the unit.

BLUETOOTH — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

Press B SRC repeatedly to select BTAUDIO.

• Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback.

To On the faceplate

Play back/pause

Select group or folder Press 2

Reverse skip/Forward skip

Reverse/Fast-forward

Repeat play Press 4

Random play Press and hold 3 to select

Select a file from a folder/list Refer to “Select a file from a folder/list” on

Press 6 IW.

/ 1 .

Press S / T.

Press and hold S / T.

repeatedly.

[ALLREPEAT], [FILEREPEAT], [REPEATOFF]

[ALLRANDOM]

•

Press 3 to select

page 9.

[RANDOMOFF].

ENGLISH

BLUETOOTH®

To On the faceplate

Switch between connected Bluetooth audio devices

* Pressing the “Play” key on the connected device itself also causes switching of sound output

from the device.

Operations and display indications may differ according to their availability on the connected device.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

• For KENWOOD Remote application is connected.

Preparation:

• Install the latest version of KENWOOD Remote application on your device before connecting.

• For more information, visit <www.kenwood.com/cs/ce/>.

, “R.APP” indicator on the display window lights up when

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the right column), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

Press 5.*

[FUNCTION]

[REMOTE APP]

[SELECT] Selects the device (IOS or ANDROID) to use the application.

[IOS]

[ANDROID]

[ANDROID LIST]* Selects the Android smartphone to use from the list.

[STATUS] Shows the status of the selected device.

* Displayed only when [ANDROID] of [SELECT] is set to [YES].

[YES]: Selects iPhone/iPod to use the application via Bluetooth or connected

via USB input terminal. ; [NO]: Cancels. If IOS is selected, select iPod BT source (or iPod iPod is connected via USB input terminal) to activate the application.

• The connectivity of the application will be interrupted or disconnected if: – You change from iPod BT source to any playback source connected via

the USB input terminal.

– You change from iPod

[YES]: Selects Android smartphone to use the application via Bluetooth. ; [NO]: Cancels.

[IOS CONNECTED]: You are able to use the application using the iPhone/

iPod connected via Bluetooth or USB input terminal.

[IOS NOT CONNECTED]: No IOS device is connected to use the application. [ANDROID CONNECTED]: You are able to use the application using the

Android smartphone connected via Bluetooth. [ANDROID NOT CONNECTED]: No Android device is connected to use the application.

USB source to iPod BT source.

USB source if your iPhone/

Default: [XX]

ENGLISH

BLUETOOTH®

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press B SRC repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. (Page 7)

• If you plug in an iPhone/iPod to the USB input terminal while listening to iPod BT source, the source automatically changes to iPod USB. Press B SRC to select iPod BT if the device is still connected via Bluetooth.

Internet radio via Bluetooth

You can listen to internet radio (Spotify) on the iPhone/iPod touch/Android device via Bluetooth on this unit.

• Make sure the USB input terminal is not connected to any device.

Listen to Spotify

Preparation:

Select

[ON]

for

[SPOTIFY SRC]

1 Start up the Spotify application on your device. 2 Connect your device via Bluetooth connection. (Page12) 3 Press B SRC repeatedly to select SPOTIFY (for iPhone/iPod) or

SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

• You can operate Spotify in the same way as Spotify via USB input terminal. (Page 10)

[SOURCE SELECT]

. (Page 5)

AUDIO SETTINGS

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[AUDIO CONTROL]

[SUB-W LEVEL]

[EASYEQ]

[LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output

level.

Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [MANUAL EQ].

[SW]: [LEVEL –50] to [LEVEL +10] (Default: [LEVEL 0] [BASS]: [LEVEL –9] to [LEVEL +9] [LEVEL 0] [MID]: [LEVEL –9] to [LEVEL +9] [LEVEL 0] [TRE]: [LEVEL –9] to [LEVEL +9] [LEVEL 0])

[FUNCTION]

Default: [XX]

ENGLISH

AUDIO SETTINGS

[MANUAL EQ] Adjusts your own sound settings for each source.

[62.5HZ] [LEVEL]

[100HZ]/[160HZ]/ [250HZ]/[400HZ]/ [630HZ]/[1KHZ]/ [1.6KHZ]/[2.5KHZ]/ [4KHZ]/[6.3KHZ]/ [10KHZ]/[16KHZ]

[Q FACTOR]

[PRESET EQ]

[BASS BOOST]

[LOUDNESS]

[SUBWOOFER SET]

[FADER]

[BALANCE]

[VOLUME OFFSET]

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [EASYEQ].

[LEVEL–9] to [LEVEL+9] ([LEVEL0]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

[BASS EXTEND]

[LEVEL –9] to [LEVEL +9] ([LEVEL 0]): Adjusts the level to memorize

for each source. (Before making an adjustment, select the source you want to adjust.)

[1.35]/[1.50]/[2.00]: Adjusts the quality factor.

[NATURAL]/[ROCK]/[POPS]/[EASY]/[TOP40]/[JAZZ]/[POWERFUL]/ [USER]: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EASY EQ] or [MANUAL EQ].)

[LV1] to [LV5]: Selects your preferred bass boost level. ; [OFF]: Cancels.

[LV1]/[LV2]: Selects your preferred low or high frequencies boost to produce a well-balanced sound at low volume. ; [OFF]: Cancels.

[ON]: Turns on the subwoofer output. ; [OFF]: Cancels.

(Not applicable if 3-way crossover is selected.)

[R15] to [F15] ([0]): Adjusts the front and rear speaker output balance.

[L15] to [R15] ([0]): Adjusts the left and right speaker output balance.

[–15] to [+6] ([0]): Presets the initial volume level of each source by

comparing to the FM volume level. (Before adjustment, select the source you want to adjust.)

[ON]: Turns on the extended bass. ; [OFF]: Cancels.

[SOUND EFFECT]

[SOUNDRECNSTR]

(Sound reconstruction)

[SPACE ENHANCE]

[SND REALIZER]

[STAGE EQ]

[DRIVE EQ]

[SPEAKER SIZE] Depending on the crossover type you have selected (see “Change the

[X ‘ OVER]

[DTA SETTINGS]

[CAR SETTINGS]

• : For 2-way crossover: selectable only if

•

[SUB-W LEVEL]

(Not applicable for RADIO source and AUX source.) [ON]: Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; [OFF]: Cancels.

(Not applicable for RADIO source.)

[SML]/[MED]/[LRG]: Virtually enhances the sound space. ; [OFF]: Cancels.

[LV1]/[LV2]/[LV3]: Virtually makes the sound more realistic. ; [OFF]: Cancels.

[LOW]/[MID]/[HI]: Virtually adjusts the sound position heard from the speakers. ; [OFF]: Cancels.

[ON]: Boosts the frequency to reduce the noise heard from outside the

car or running noise of the tyres. ; [OFF]: Cancels.

crossover type” on page 5), 2-way crossover or 3-way crossover setting items will be shown. (See “Crossover settings” on page 20.) By default, 2-way crossover type is selected.

For settings, see “Digital Time Alignment settings” on page 22.

[SWITCH PREOUT]

is selectable only if

[SUB-W LEVEL]/[SUBWOOFER SET]

is set to

[SUB-W]

[SUBWOOFER SET]

. (Page 4

is set to

)

[ON].

ENGLISH

AUDIO SETTINGS

Crossover settings

Below are the available setting items for 2-way crossover and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for optimum performance.

• The frequency and slope settings are automatically set for the crossover of the selected speaker.

• If

[NONE]

is selected for the following speaker in

setting of the selected speaker is not available.

– 2-way crossover: – 3-way crossover:

X ‘ OVER (crossover)

•

[FRQ]/[F-HPFFRQ]/[R-HPFFRQ]/[SWLPF FRQ]/[HPFFRQ]/[LPFFRQ]

crossover frequency for the selected speakers (high pass filter or low pass filter).

[THROUGH]

•

[SLOPE]/[F-HPFSLOPE]/[R-HPFSLOPE]/[SWLPF SLOPE]/[HPFSLOPE]/[LPFSLOPE]

Adjusts the crossover slope.

Selectable only if a setting other than

crossover frequency.

•

[SW LPF PHASE]/[PHASE]

with the other speaker output.

•

[GAINLEFT]/[GAINRIGHT]/[F-HPFGAIN]/[R-HPFGAIN]/[SWLPF GAIN]/[GAIN]

the output volume of the selected speaker.

[TWEETER]

[WOOFER]

is selected, all signals are sent to the selected speakers.

[FRONT]/[REAR]/[SUBWOOFER]

: Selects the phase of the speaker output to be in line

[THROUGH]

[SPEAKER SIZE]

is selected for the

, the

: Adjusts the

[X ‘ OVER]

: Adjusts

2-way crossover setting items

[SPEAKER SIZE]

[FRONT] [SIZE]

[TWEETER]

[REAR]

[SUBWOOFER]*1*2

[X ' OVER]

[TWEETER] [FRQ]

[FRONT HPF] [F-HPF FRQ]

[REAR HPF] [R-HPF FRQ]

*1, *2 : See page 21.

[8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/ [5×7]/[6×8]/[6×9]/[7×10]/[NONE] (not connected)

[16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE] (not

connected)

[GAIN LEFT] [GAIN RIGHT]

[F-HPF SLOPE] [F-HPF GAIN]

[R-HPF GAIN]

[8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/ [18CM]/[4×6]/[5×7]/[6×8]/[6×9]/[7×10]

[SMALL]/[MIDDLE]/[LARGE]/[NONE] (not

connected)

[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]

[–8] to [0] [–8] to [0]

[30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/ [90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH]

[–6DB]/[–12DB]/[–18DB]/[–24DB] [–8] to [0]

Refer [FRONT HPF] settings above.[R-HPF SLOPE]

ENGLISH

AUDIO SETTINGS

[SUBWOOFER LPF]*1*2

[SW LPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/

[SW LPF SLOPE] [SW LPF PHASE] [SW LPF GAIN]

[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH]

[–6DB]/[–12DB]/[–18DB]/[–24DB] [REVERSE] (180°)/[NORMAL] (0°) [–8] to [0]

3-way crossover setting items

[SPEAKER SIZE]

[TWEETER] [MID RANGE]

[WOOFER]*2

[X ' OVER]

[TWEETER] [HPF FRQ]

[SMALL]/[MIDDLE]/[LARGE] [8CM]/[10CM]/[12CM]/[13CM]/[16CM]/[17CM]/[18CM]/[4×6]/

[5×7]/[6×8]/[6×9] [16CM]/[20CM]/[25CM]/[30CM]/[38CM OVER]/[NONE] (not

connected)

[1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/ [6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]

[SLOPE] [PHASE] [GAIN]

[–6DB]/[–12DB] [REVERSE] (180°)/[NORMAL] (0°) [–8] to [0]

[MID RANGE] [HPF FRQ] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/

[HPF SLOPE] [LPF FRQ]

[LPF SLOPE] [PHASE] [GAIN]

[WOOFER]*2 [LPF FRQ]

[SLOPE] [PHASE] [GAIN]

*1 *2 Selectable only when [SUBWOOFER SET] is set to [ON]. (Page 19)

: Selectable only when [SWITCH PREOUT] is set to [SUB-W]. (Page 4)

[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH]

[–6DB]/[–12DB] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/

[6.3KHZ]/[8KHZ]/[10KHZ]/[12.5KHZ]/[THROUGH] [–6DB]/[–12DB] [REVERSE] (180°)/[NORMAL] (0°) [–8] to [0] [30HZ]/[40HZ]/[50HZ]/[60HZ]/[70HZ]/[80HZ]/

[90HZ]/[100HZ]/[120HZ]/[150HZ]/[180HZ]/ [220HZ]/[250HZ]/[THROUGH]

[–6DB]/[–12DB] [REVERSE] (180°)/[NORMAL] (0°) [–8] to [0]

ENGLISH

AUDIO SETTINGS

Digital Time Alignment settings

Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle.

• For more information, see of

[DTA SETTINGS]

[POSITION]

[DISTANCE] [0CM] to [610CM]: Fine adjust the distance to compensate.

[GAIN] [–8DB] to [0DB]: Fine adjust the output volume of the selected speaker.

[DTA RESET]

[CAR SETTINGS] Identify your car type and rear speaker location in order to make the

[CAR TYPE]

[R-SP LOCATION]

”.

“Determining the value for

Selects your listening position (reference point).

[ALL]: Not compensating ; [FRONT RIGHT]: Front right seat ; [FRONT LEFT]: Front left seat ; [FRONT ALL]: Front seat

• [FRONT ALL] is displayed only when [2-WAY X’OVER] is selected.

(Page 5)

(Before making an adjustment, select the speaker you want to adjust.)

[YES]: Resets the settings ([DISTANCE] and [GAIN]) of the selected [POSITION] to default. ; [NO]: Cancels.

adjustment for [DTA SETTINGS].

[COMPACT]/[FULL SIZE CAR]/[WAGON]/[MINIVAN]/[SUV]/ [MINIVAN(LONG)]: Selects the type of vehicle. ; [OFF]: Not

compensating.

Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point).

• [DOOR]/[REAR DECK]: Selectable only when [CAR TYPE] is selected as [OFF], [COMPACT], [FULL SIZE CAR], [WAGON] or [SUV].

• [2ND ROW]/[3RD ROW]: Selectable only when [CAR TYPE] is selected as [MINIVAN] or [MINIVAN(LONG)].

[DISTANCE]

and

[GAIN]

• Before making an adjustment for select the speaker you want to adjust:

When 2-way crossover is selected:

[FRONT LEFT]/[FRONT RIGHT]/[REAR LEFT]/[REAR RIGHT]/[SUBWOOFER]

– You can only select

other than (Page 20)

When 3-way crossover is selected:

[TWEETER LEFT]/[TWEETER RIGHT]/[MID LEFT]/[MID RIGHT]/[WOOFER]

– You can only select

[WOOFER]

[R-SP LOCATION]

•

– 2-way crossover is selected. (Page 5) – A setting other than

(Page 20)

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

[REAR LEFT], [REAR RIGHT]

[NONE]

is selected for

[WOOFER]

[SPEAKERSIZE]

[CAR SETTINGS]

[NONE]

[DISTANCE]

and

[REAR]

and

if a setting other than

. (Page 21)

is selectable only if:

is selected for

If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.

Determines the center of the currently set

listening position as the reference point.

Measures the distances from the reference

point to the speakers.

Calculates the differences between the

distance of the furthest speaker (rear speaker) and other speakers.

Sets the [DISTANCE] calculated in step 3 for

individual speakers.

Adjusts [GAIN] for individual speakers.

Example: When [FRONT ALL] is selected as the listening position

[GAIN]

and

[SUBWOOFER]

[REAR]

[DTA SETTINGS]

if a setting

[SPEAKER SIZE]

[NONE]

is selected for

[SPEAKER SIZE]

ENGLISH

DISPLAY SETTINGS

: Zone identification for color settings and brightness settings

: Zone identification for brightness setting

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the right column), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[FUNCTION]

[DISPLAY]

[COLOR SELECT]

[DIMMER]

[BRIGHTNESS]

[TEXT SCROLL]

Default: [XX]

(For ) Selects illumination colors for [ALL ZONE], [ZONE 1] and [ZONE 2] separately.

Select a zone ([ZONE1], [ZONE2], [ALLZONE]). (See the illustration on

the left column.)

Select a color for the selected zone.

[INITIAL COLOR]/[VARIABLE SCAN]/[CUSTOM R/G/B]/[RED1]/[RED2]/

[RED3]/[PURPLE1]/[PURPLE2]/[PURPLE3]/[PURPLE4]/[BLUE1]/ [BLUE2]/[BLUE3]/[SKYBLUE1]/[SKYBLUE2]/[LIGHTBLUE]/[AQUA1]/ [AQUA2]/[GREEN1]/[GREEN2]/[GREEN3]/[YELLOWGREEN1]/ [YELLOWGREEN2]/[YELLOW]/[ORANGE1]/[ORANGE2]/[ORANGERED]

To make your own color, select [CUSTOM R/G/B]. The color you have made will be stored in [CUSTOM R/G/B].

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color ([R]/[G]/[B]) to adjust.

Turn the volume knob to adjust the level ([0] to [9]), then press the knob.

Dims the illumination.

[ON]: Dimmer is turned on. [OFF]: Dimmer is turned off. [DIMMER TIME]: Set the dimmer on and off time.

Turn the volume knob to adjust the [ON] time, then press the knob.

Turn the volume knob to adjust the [OFF] time, then press the knob.

Default: [ON]: [18:00] ; [OFF]: [6:00]

Select a zone. (See the illustration on the left column)

[LVL00] to [LVL31]: Set the brightness level for the selected zone.

[ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at 5-second intervals. ; [OFF]: Cancels.

ENGLISH

DISPLAY SETTINGS

[LEVEL METER] (For )

[ON]: Shows the level meter on the display window (as shown below). ; [OFF]: Cancels.

Level meter

REFERENCES

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab. Be careful not to damage the connector.

Connector (on the reverse side of the faceplate)

More information

For: – Latest firmware updates and latest compatible item list

– KENWOOD original application

– Any other latest information Visit <www.kenwood.com/cs/ce/>.

Playable files

• Playable audio file for USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)

• Playable USB device file system: FAT12, FAT16, FAT32

Even when audio files comply with the standards listed above, playback may be impossible

depending on the types or conditions of media or devices.

• For detailed information and notes about the playable audio files, visit <www.kenwood.com/cs/ce/audiofile/>.

About USB devices

• You cannot connect a USB device via a USB hub.

• Connecting a cable whose total length is longer than 5 m may result in abnormal playback.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1.5 A.

ENGLISH

+ 106 hidden pages