Kenwood KDC-BT755HD User Manual 2
KDC-X797
Check the latest edition
KDC-BT755HD
CD-RECEIVER
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition
and the modified pages.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the
product.
Model KDC-X797/ KDC-BT755HD Serial number
US Residents Only
Register your Kenwood product at www.Kenwoodusa.com
Register Online
IM368_Ref_K_en_02© 2012 JVC KENWOOD Corporation
0. Contents
1. SAFETY 4
1.1 Safety precaution
1.2 Important information
1.3 Regulatory Compliance
2. GETTING STARTED 8
2.1 Component names and functions
2.2 Preparation
3. GENERAL 10
3.1 Basic operations
3.2 Adjusting the clock
3.3 Changing the initial settings
3.4 Setting the demonstration mode
4. CD/ USB/ iPod 12
4.1 Start playback
4.2 Basic operations
4.3 Music search
4.4 Alphabet search
4.5 Direct Music Search using the remote control
(RC-406)
4.6 Setting the skip search ratio
4.7 More information
5. Pandora® 16
5.1 Requirements Pandora®
5.2 Start listening
5.3 Basic operations
5.4 New station creation
5.5 Pandora source control
6. iHeartRadio™ 18
6.1 Requirements iHeartRadio™
6.2 Start listening
6.3 Basic operations
6.4 Station search
6.5 Alphabet search
6.6 Station delete
6.7 iHeartRadio source control
7. Aha™ RADIO 22
7.1 Requirements Aha™
7.2 Start listening
7.3 Basic operations
7.4 Calling a number in the content
7.5 Aha source control
8. HD Radio™ TECHNOLOGY 24
8.1 About HD Radio™ Technology
8.2 Basic operations
8.3 Auto memory
8.4 Direct Access Tuning using the remote control
(RC-406)
8.5 iTunes Tagging
8.6 Changing the HD Radio settings
9. AUX 26
9.1 Start listening
9.2 Set the AUX name
10. AUDIO SETTINGS 27
10.1 Audio controls
11. DISPLAY SETTINGS 28
11.1 Display & Illumination setting
11.2 Adjusting the Illumination color
12. GETTING STARTED OF Bluetooth® 30
12.1 About the Bluetooth module
12.2 Registering a Bluetooth device
12.3 Transferring the Phone Book
12.4 Bluetooth device registration test
13. HANDS-FREE PHONING 32
13.1 Receiving a Call
13.2 During a Call
13.3 Calling a Number in the Phone Book
13.4 Calling a Number in the Call Log
13.5 Dialing a Number
13.6 Speed Dialing (Preset Dial)
13.7 Registering in the preset dial number list
13.8 Make a Voice Dialing Call
13.9 Switching between Two Connected Cellphones
13.10 Clearing the disconnection message
13.11 SMS notification
14. Bluetooth AUDIO 35
14.1 Start listening
15. Bluetooth SETUP 36
15.1 Selecting the Bluetooth Device
15.2 Deleting a registered Bluetooth device
15.3 Registering the PIN code
15.4 Changing the Bluetooth detail settings
16. SiriusXM™ 38
16.1 Before use
16.2 Basic operations
16.3 Category search
16.4 Direct Access Tuning using the remote
control (RC-406)
16.5 SiriusXM Replay™
16.6 iTunes Tagging
16.7 Changing the SiriusXM tuner setting
16.8 Channel Lock (Parental Lock)
16.9 Setting Parental Lock for Mature content
16.10 Parental Lock pass code setting
16.11 Channel skip
17. REMOTE CONTROL 44
17.1 Before using remote control
17.2 Basic operations
18. TROUBLESHOOTING 46
18.1 Setting error
18.2 Operation/wiring error
18.3 Error messages
19. SPECIFICATIONS 50
19.1 Specifications of each section
19.2 Trademarks
|
2
KDC-X797/ KDC-BT755HD
English
|
3
1. SAFETY
1.1 Safety precaution
# WARNING
Do not operate any function that takes your
attention away from safe driving.
# CAUTION
Volume setting:
• Adjust the volume so that you can hear sounds
outside the car to prevent accident.
• Lower the volume before playing digital sources
to avoid damaging the speakers by the sudden
increase of the output level.
General:
• Avoid using the USB device or iPod/iPhone if it
might hinder driving safety.
• Make sure all important data has been backed
up. We shall bear no responsibility for any loss of
recorded data.
• Never put or leave any metallic objects (such as
coins or metal tools) inside the unit, to prevent a
short circuit.
• If a disc error occurs due to condensation on the
laser lens, eject the disc and wait for the moisture to
evaporate.
Remote control (RC-406):
• Do not leave the remote control in hot places such
as on the dashboard.
• The Lithium battery is in danger of explosion if
replaced incorrectly. Replace it only with the same
or equivalent type.
• The battery pack or batteries shall not be exposed
to excessive heat such as sunshine, fire or the like.
• Keep battery out of reach of children and in
original package until ready to use. Dispose of used
batteries promptly. If swallowed, contact a physician
immediately.
1.2 Important information
Maintenance
• Cleaning the unit: Wipe off the dirt on the panel
with a dry silicon or soft cloth.
• Cleaning the connector: Detach the faceplate
and clean the connector with a cotton swab gently,
being careful not to damage the connector.
Condensation
When the car is air-conditioned, moisture may collect
on the laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the moisture
to evaporate.
How to reset your unit
If this unit fails to operate properly, press the reset
button. The unit returns to the factory settings when
the reset button is pressed.
2
3
1
Notes
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they can
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
• The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.
1.3 Regulatory Compliance
#CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location : Top plate
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized change
or modification is made.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment may cause harmful interference to radio
communications, if it is not installed and used in
accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
IC (Industry Canada) Notice
This device complies with Industry Canada licenceexempt RSS standard(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference, and
(2)this device must accept any interference, including
interference that may cause undesired operation of
the device.
The term “IC: ” before the certification/ registration
number only signifies that the Industry Canada
technical specification were met.
#CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
----------------------------------------------------------------------
• Contains Transmitter Module
FCC ID : XQN-BTR60X
• Contains Transmitter Module
IC: 9688A-BTR601
----------------------------------------------------------------------
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material – special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
|
4
KDC-X797/ KDC-BT755HD
English
|
5
1. SAFETY
Información acerca de la eliminación de
equipos eléctricos y electrónicos al nal
de la vida útil (aplicable a los países que
hayan adoptado sistemas independientes
de recogida de residuos)
Los productos con el símbolo de un contenedor con
ruedas tachado no podrán ser desechados como
residuos domésticos.
Los equipos eléctricos y electrónicos al final de la
vida útil, deberán ser reciclados en instalaciones
que puedan dar el tratamiento adecuado a
estos productos y a sus subproductos residuales
correspondientes. Póngase en contacto con su
administración local para obtener información sobre
el punto de recogida más cercano. Un tratamiento
correcto del reciclaje y la eliminación de residuos
ayuda a conservar los recursos y evita al mismo
tiempo efectos perjudiciales en la salud y el medio
ambiente.
Para cumplimiento de la COFETEL:
La operacion de este equipo esta sujeta a las
siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su
operacion no deseada.
|
6
KDC-X797/ KDC-BT755HD
English
|
7
2. GETTING STARTED
3 4 5
679 810
1113
1 2
2.1 Component names and functions
12
(1) [8SRC] button
Press the button to turn on the unit and select the
Source.
Press and hold the button to turn off the unit.
(2) [ 1 ] button
When listening to the radio, press the button to
select a band.
During CD, USB, iPod, Pandora, Aha or iHeartRadio
source playback, press the button to enter the
search mode.
(3) Volume knob
Turn the knob to adjust volume.
Press the knob to enter Function mode.
Turn and press the knob to select menu setting
item.
(4) Disc slot
(5) [G] button
Press the button to eject a disc.
(6) USB terminal
A USB device or an iPod can be connected.
(7) Auxiliary input
Portable audio device can be connected with the
mini-plug (3.5 mm ø).
(8) [1/ 5–] [2/ 4+] [3/ 9] [4/ /] [5/ iPod] [6/ L]
button
When listening to the radio, press the button to call
a preset station.
During CD/USB/iPod source playback, press the
button to perform the following operations:
- [1/ 5–] [2/ 4+] : Selects an audio file folder.
- [3/ 9] : Selects Random Play.
- [4/ /] : Selects Repeat Play.
- [5/ iPod] : Selects App & iPod Control Mode
- [6/ L] : Pauses or plays
|
8
KDC-X797/ KDC-BT755HD
(9) [DISP/ SCRL] button
Press the button to change display item.
Press and hold the button to scroll through texts
on the display.
Press and hold the button to enter the clock
adjustment mode directly while in clock display
screen.
(10) [E]/ [F] button
Press the button to select a station and song.
(11) [ Ú ] button
Press the button to enter Bluetooth mode.
Press the button to answer an incoming call.
Press and hold the button to start voice
recognition.
(12) Release button
Press the button to detach the faceplate.
(13) [ 6 ] button
In each of the selected modes, press the button to
return to the previous item.
When listening to HD Radio or SiriusXM source
playback, press and hold the button to retrieve tag
information.
The following indicator lights up when...
BT: Bluetooth cell-phone connection status.
ST: A stereo broadcast is received.
1: Indicates that the Music Search, Station Search,
Category Search, or Channel Search mode is
selected now.
FOLDER: Folder information is displayed in the Music
Search mode.
ARTIST: Artist information is displayed in the Music
Search mode.
ALBUM: Album information is displayed in the Music
Search mode.
SONG: The source is CD, USB, iPod, Pandora.
When displaying song information in the
Music Search mode.
DIGITAL: HD Radio digital broadcast is tuned in.
TAG : The song information can be registered.
+: Indicates that the Replay function is ON.
LOUD: “LOUDNESS” is set to “LV1” or “LV2”. See
BB: “BASS BOOST” is set to “LV1”, “LV2” or “LV3”. See
EQ: “PRESET EQ” is set to an EQ mode other than
9: Indicates that the Disc Random, Folder Random
/: Indicates that the Track Repeat, Folder Repeat or
Blinks when changed to analog broadcast.
<LOUDNESS> (page 27).
<BASS BOOST> (page 27).
“NATURAL”. See <PRESET EQ> (page 27).
or All Random function is ON.
File Repeat function is ON.
2.2 Preparation
How to read this manual
Operations explained mainly using buttons on the
faceplate.
• [ ] indicates the buttons on the panel.
•
XX
indicates the selected items.
How to attach/detach the faceplate
• Do not expose the faceplate to direct sunlight,
excessive heat, or humidity. Also avoid places with
too much dust or the possibility of water splashing.
• Keep the faceplate in its casing while detached.
• The faceplate is a precision component of the unit
and can be damaged by shocks or jolts.
• To prevent deterioration, do not touch the terminals
of the unit and faceplate with your fingers.
2
1
2
1
Canceling the demonstration mode
The display demonstration is always turned on unless
you cancel it.
When you turn on the power (or after you reset the
unit), the display shows:
“CANCEL DEMO” X “PRESS” X “ VOLUME KNOB”
Press the volume knob.
“YES” is selected for the initial setting.
Press the volume knob again.
“DEMO OFF” appears.
- If no operation is done for about 15 seconds or
if you turn the volume knob to select “NO” in
step 2, “DEMO MODE” appears and the display
demonstration starts.
Setting the clock
Press [SCRL DISP] repeatedly to select the
clock.
Press and hold [SCRL DISP] to enter clock
adjustment mode.
Turn the volume knob to adjust the hour, then
press to enter minute adjustment.
Turn the volume knob to adjust the minute,
then press the knob.
- Press [E] / [F] to move between the hour
and minute adjustment.
Changing the initial settings
Refer to <3.3 Changing the initial settings> (page
11)
English
|
9
3. GENERAL
3.1 Basic operations
Turning the power ON/OFF
Press and hold [8SRC] to turn the power on.
Press and hold [8SRC] to turn the power o.
Selecting a source
Press [8SRC] repeatedly to select your desired
source.
SiriusXM*1 (“SIRIUS XM”) Á HD Radio (“HD RADIO”)
Á USB or iPod*2 (“USB” or “iPod”) Á Pandora*3
(“PANDORA”) Á iHeartRadio*3 (“IHEARTRADIO”) Á
Aha*3 (“AHA”) Á Bluetooth audio (“BT AUDIO”) Á
CD*2 (“CD”) Á Auxiliary input*3 (“AUX”) Á Standby
(“STANDBY”)
*1 This source can be selected only when connected to an
optional SiriusXM Vehicle Connect Tuner.
2
This source can be selected only when it can be played.
*
3
“PANDORA”, “IHEARTRADIO”, “AHA”, and “AUX” sources are
*
not selectable when not in use. See <3.3 Changing the
initial settings> (page 11).
Adjusting the volume
Turn the volume knob to adjust the sound
volume.
Switching display
Press [SCRL DISP] repeatedly to select an
information.
Press and hold [SCRL DISP] to scroll the current
display information.
USB terminal
Open the cover.
Connect a USB device or iPod.
CA-U1EX or KCA-iP102 (optional accessories) is
recommended to connect a USB device or iPod.
Auxiliary input
Open the cover.
Connect a portable audio device using a
stereo mini-plug (3.5 mm ø) audio cable.
3.2 Adjusting the clock
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
press the knob.
Turn the volume knob to select
ADJUST
, then press the knob.
SETTINGS
CLOCK
, then
CLOCK
,
Turn the volume knob to adjust the hour, then
press to enter minute adjustment.
Turn the volume knob to adjust the minute,
then press the knob.
- Press [E] / [F] to move between the hour
and minute adjustment.
Press and hold [6] to exit.
Setting the clock
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
press the knob.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
then press the knob.
”ON”: Synchronizes the unit’s time to the Radio
Data Broadcast System station time.
“OFF”: Cancels the usage of Radio Data Broadcast
System station time.
SETTINGS
CLOCK
, then
TIME SYNC
ON
or
OFF
,
,
,
Press and hold [6] to exit.
3.3 Changing the initial settings
You can change an initial setting item(s) according
to your viewing or listening preference
Press [8SRC] to select
STANDBY
.
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
INITIAL SET
,
Turn the volume knob to select a desired
setting item, then press the knob.
- See table below for selection.
- Press [ 6 ] to return to the previous item.
Press and hold [6] to exit.
Item Description
PRESET TYPE NORMAL: Memorizes one station or channel for each
KEY BEEP ON/ OFF: Activates/deactivates tone emission when
PANDORA SRC ON/ OFF: Select whether to display Pandora during
IHEART SRC ON/ OFF: Select whether to display iHeartRadio
AHA SRC ON/ OFF: Select whether to display aha during source
BUILT-IN AUX ON: Enables AUX in source selection. ;
CD READ “1”: Automatically distinguishes between audio file
SP SELECT OFF / 5/4 / 6×9/6 / OEM: Select the speaker size for
F/W UPDATE Upgrades the firmware.
(Colored text: Factory setting)
preset button in each band (FM1/ FM2/ FM3/ AM/
SXM1/ SXM2/ SXM3/ SXM4). ;
MIX: Memorizes one station or channel for each preset
button regardless of the selected band (FM1/ FM2/
FM3/ AM/ SXM1/ SXM2/ SXM3/ SXM4).
a key is pressed.
source selection.
during source selection.
selection.
OFF: Disables.
disc and music CD. ; “2”: Forces to play as a music CD.
No sound can be heard if an audio file disc is played.
optimum performance.
YES: Starts upgrading the firmware. ;
NO: Does not upgrade firmware.
For details on how to update the firmware, see: www.
kenwood.com/cs/ce/
3.4 Setting the demonstration mode
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
If “ON” is selected, display demonstration starts if no
operation is done for about 20 seconds.
DEMO MODE
ON
or
OFF
.
Press and hold [6] to exit.
,
|
10
KDC-X797/ KDC-BT755HD
English
|
11
4. CD/ USB/ iPod
4.1 Start playback
Playing a disc
Insert a disc into the loading slot.
Playback starts automatically.
Removing the disc
Press [G] to eject a disc.
Playing a USB device or iPod
Open the cover.
Connect a USB device or iPod to the USB
terminal.
The source automatically switches, and playback
starts.
2
(b)
1
(a)
(a) CA-U1EX (500 mA Max.: optional accessory) is
recommended to connect a USB device.
(b) USB device (commercially available)
(b)
2
1
(a)
(a) KCA-iP102 (optional accessory) is required to
connect an iPod.
(b) Apple iPod (commercially available)
When playback of iPod touch or iPhone does not start
• If an unsupported application has started when connecting
iPod touch or iPhone, “APP&iPod” appears and sometimes
playback does not starts. Press [5 iPod].
Removing the USB device or iPod
Press [8SRC] to select a source other than
“USB”, “PANDORA”, “AHA“, “IHEATRADIO“ or
“ i P o d ”.
Remove the USB device or iPod.
4.2 Basic operations
Selecting a Song
Press [E] or [F].
Selecting an audio file folder
Press [1 –] or [2 +].
Fast-forwarding or fast-backwarding a Song
Press and hold [E] or [F].
Pause and play
Press [6 L].
Selecting Repeat Play
Press [4 /] repeatedly to make a selection.
Audio CD : TRACK REPEAT, REPEAT OFF
Audio File : FILE REPEAT, FOLDER REPEAT, REPEAT
OFF
iPod/ KME-Light/ KMC : FILE REPEAT, REPEAT OFF
Selecting Random Play
Press [3 9] repeatedly to make a selection.
Audio CD : DISC RANDOM, RANDOM OFF
Audio File/ iPod/ KME-Light/ KMC :
FOLDER RANDOM, RANDOM OFF
All Random Play
Press and hold [3 9].
Pressing this button again plays songs in the
normal mode starting.
Audio File/ iPod/ KME-Light/ KMC :
ALL RANDOM, RANDOM OFF
- Changes the iPod browsing item to “songs”.
Selecting App & iPod Control Mode
Press [5 iPod] repeatedly to select the control
mode.
- MODE ON : From the iPod *. “APP&iPod MODE”
appears on the display.
- MODE OFF : From the unit.
* You can still select an audio file, play/pause and fast-
forward/fast- reverse a song of audio file in the iPod
from the unit.
Display Selection
Press [SCRL DISP] repeatedly to select an
information.
CD: DISC TITLE ; TRACK TITLE ; P-TIME (Track number
and playing time) ; CLOCK
Audio File/ iPod/ KME-Light/ KMC:
TITLE/ARTIST ; ALBUM/ARTIST ; FOLDER NAME ; FILE
NAME ; P-TIME (Track number and playing time) ;
CLOCK
iPod (MODE ON): APP&iPod MODE ; CLOCK
4.3 Music search
You can search for the song you want to play.
Press [ 1 ] to enter Music Search mode.
“SEARCH” appears, then the current file name
appears on the display.
Turn the volume knob to select a folder/ track/
le, then press the knob.
CD: Select the desired track.
Audio file: Select the desired folder, then a file.
iPod/ KME-Light/ KMC: Select the desired file
from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS,
PODCASTS*, GENRES, COMPOSERS*).
* Only for iPod.
- To skip songs, press [E]/ [F]. Holding [E]/
[F] for 3 seconds or longer skips songs at 10%
regardless of the selected skip ratio. <4.6 Setting
the skip search ratio> (page 14)
This operation is effective only for the iPod, KMELight/ KMC media.
- Turning the volume knob fast in the Music search
mode allows you to enter the alphabet search
mode. <4.4 Alphabet search> (page 13)
- To return to the root folder (audio file), top menu
(iPod, KME-Light/ KMC media) or first track (audio
CD), press [5].
- To return to the previous folder, press [ 6 ].
- < or > on the display indicates that preceded/
next item is available.
To cancel the Music search mode
Press and hold [ 6 ].
Undisplayable titles
• If characters of a song name cannot be read, the browse
item name and digits are displayed such as “PLIST***”
instead.
Items Display
Playlists “PLIST***”
Artists “ART***”
Albums “ALB***”
Songs “PRGM***”
Podcasts “PDCT***”
Genres “GEN***”
Composers “COM***”
4.4 Alphabet search
(Function of iPod)
You can select an alphabetic character from the
list in the browse item (artist, album, etc.) currently
selected.
Press [ 1 ] to enter Music Search mode.
“SEARCH” appears, then the current file name
appears on the display.
Press [ 1 ] again to enter Alphabet Search
mode.
“SEARCH <_ >” appears.
Turn the volume knob to select the character
to be searched for.
Press [E] / [F] to move to the entry
position.
Press the volume knob to start searching.
After this step, see step 2 of <4.3 Music search>
(page 13) to select a song.
To cancel the Alphabet search mode
Press [ 6 ].
To cancel the Music search mode
Press and hold [ 6 ].
Alphabet search notes
• The time of Alphabet search may become long depending
on the number of items (songs) in iPod.
• To search for a character other than A to Z and 0 to 9, enter
“*”.
• If the first character string begins with an article “a”, “an”,
or “the” in the alphabet search mode, it is searched for in
defiance of the article.
|
12
KDC-X797/ KDC-BT755HD
English
|
13
4. CD/ USB/ iPod
4.5 Direct Music Search using the remote control (RC-406)
Not available if Random Play, KME-Light/ KMC
media, iPod playback is selected.
Press DIRECT to enter Direct Music Search
mode.
“– – –” appears.
Press the number buttons to enter the track
number.
Press [E] / [+F] to search for the music.
To cancel the Direct Music Search mode
Press [ 6 ].
4.6 Setting the skip search ratio
(Function of iPod, KME-Light/ KMC media)
You can change the ratio of skip performed as
mentioned in <4.3 Music search> (page 13).
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
then press the knob.
SETTINGS
SKIP SEARCH
,
,
Turn the volume knob to select the skip search
ratio from the following options then press
the knob.
0.5%/ 1%/ 5%/ 10% : Sets the ratio of skip when
searching for a song in Music Search mode.
(Holding [E] / [F] for 3 seconds or longer skips
songs at 10% regardless of the selected ratio.)
Press and hold [6] to exit.
4.7 More information
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move
outward.
• Clean the disc with a dry silicon or soft cloth. Do not
use any solvents.
• When removing discs from this unit, pull them out
horizontally.
• Remove the rims from the center hole and disc
edge before inserting a disc.
Discs that cannot be used
• This unit can only play the CDs with .
• Discs that are not round.
• Discs with coloring on the recording surface or discs
that are dirty.
• You cannot play a Recordable/ReWritable disc that
has not been finalized. (For the finalization process
refer to your disc writing software, and your disc
recorder instruction manual.)
• 3-inch CD cannot be used. Attempt to insert using
an adapter can cause malfunction.
About Audio le
• Playable Audio file
: AAC-LC (.m4a), MP3 (.mp3), WMA (.wma), WAVE
(.wav)*1
*1: Only for USB device.
• Playable disc media: CD-R/RW/ROM
• Playable disc file format: ISO 9660 Level 1/2, Joliet,
Long file name.
• Playable USB device file system: FAT12, FAT16, FAT32
Although the audio files are complied with the
standards listed above, the play maybe impossible
depending on the types or conditions of media or
device.
• Detailed information and notes about the playable
audio files are stated in an online manual on the
following site:
www.kenwood.com/cs/ce/audiofile/
About USB device
• This unit can play audio files stored on a USB mass
storage class device.
• Install the USB device in a place where it does not
interfere with your driving.
• You cannot connect a USB device via a USB hub and
Multi Card Reader.
• Make sure all important data has been backed up to
avoid losing the data.
• Connecting a cable whose total length is longer
than 5 m can result in abnormal playback.
• A USB connection cable, CA-U1EX (optional
accessory) is required for connecting a USB device.
About compatible iPod/iPhone
Made for
- iPod touch (4th generation)
- iPod touch (3rd generation)
- iPod touch (2nd generation)
- iPod touch (1st generation)
- iPod classic
- iPod with video
- iPod nano (6th generation)
- iPod nano (5th generation)
- iPod nano (4th generation)
- iPod nano (3rd generation)
- iPod nano (2nd generation)
- iPod nano (1st generation)
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPhone 3G
- iPhone
• Latest compatible list of iPod/iPhone.
For details, see: www.kenwood.com/cs/ce/ipod
• Type of control available varies depending on the
type of connected iPod.
For details, see: www.kenwood.com/cs/ce/ipod
• The word “iPod” appearing in this manual indicates
the iPod or iPhone connected to this unit with a
connection cable, KCA-iP102 (optional accessory).
• If you start playback after connecting the iPod, the
music that has been played by the iPod is played
first.
In this case, “RESUMING” appears without displaying
a folder name, etc. Changing the browse item will
display a correct title, etc.
• You cannot operate iPod if “KENWOOD” or “å”
displayed on iPod.
About “KENWOOD Music Editor Light” and
“KENWOOD Music Control”
• This unit supports the PC application “KENWOOD
Music Editor Light” (hereinafter “KME-Light”), and
Android™ application “KENWOOD Music Control”
(hereinafter “KMC”).
• When you use the audio file with database
information added by the “KENWOOD Music Editor
Light” or “KENWOOD Music Control”, you can search
for a file by title, album or artist name using Music
Search.
• “KENWOOD Music Editor Light” and “KENWOOD
Music Control” are available from the following web
site: www.kenwood.com/cs/ce/
|
14
KDC-X797/ KDC-BT755HD
English
|
15
5. Pandora®
5.1 Requirements Pandora®
Requirements for listening to Pandora® are as follows:
• A smartphone with the latest Pandora application
installed.
• A Pandora account (if you do not have an account,
create one for free using the mobile app or on
www.pandora.com).
• An active internet connection.
iPhone or iPod touch
• Apple iPhone or iPod touch with iOS 3 or later
isntalled
• Latest version of the Pandora application (search
App Store for Pandora and install).
• iPhone/ iPod touch connected to this unit with a
KCA-iP102.
Android™
• Latest version of the Pandora Android application
(search Google Play for Pandora and install).
• Bluetooth must be built in and the following profiles
must be supported.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
BlackBerry®
• Visit www.pandora.com from the built in browser to
download the Pandora application.
• Bluetooth must be built in and the following profiles
must be supported.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
Notes
• Pandora® is available only in the U.S, Australia and New
Zealand.
• Because Pandora® is a third-party service, the specifications
are subject to change without prior notice. Accordingly,
compatibility may be impaired or some or all of the services
may become unavailable.
• Some functions of Pandora® cannot be operated from this
unit.
• For issues using the application, please contact Pandora® at
pandora-support@pandora.com
5.2 Start listening
Android or BlackBerry
Preparation :
• You need to register your smartphone before using it with
this unit. See <12.2 Registering a Bluetooth device> (page
30).
• Disconnect the iPhone or iPod touch.
• Make sure “ON” is selected for “PANDORA SRC”. <5.5 Pandora
source control> (page 17)
Open the Pandora® application on your
smartphone.
Press [8SRC] to select
PANDORA
.
(b)
(a)
(a) Connection through Bluetooth
(b) Android or BlackBerry smartphone
(commercially available)
- Speakers are selectable by the Bluetooth setting
“BT HF/AUDIO”. The default is the front speakers.
See <BT HF/AUDIO> (page 37).
iPhone or iPod touch
Preparation :
• Make sure “ON” is selected for “PANDORA SRC”. <5.5 Pandora
source control> (page 17)
Open the Pandora® application on your
smartphone.
Open the cover.
Connect an iPhone to the USB terminal.
The source switches, and broadcasting starts
automatically from your current station.
(b)
3
2
(a)
(a) KCA-iP102 connector (optional accessory)
(b) iPhone or iPod touch (commercially available)
Removing the iPhone
Press [8SRC] to select a source other than
“PANDORA”, “AHA“, “IHEATRADIO“ or “iPod”.
Remove the iPhone.
Error messages
• CHECK DEVICE: Any device ready for Pandora internet
radio reception is not connected to this unit.
• UPGRADE APP: The Pandora application is an older version
which the unit can not support. Confirm that the Pandora
application is the latest version.
• LICENSE ERROR: The Pandora® internet radio is accessed
from a country to which it is not delivered.
5.3 Basic operations
Thumbs up
Press [2 4].
Thumbs down
Press [1 5].
Song skip
Press [F].
Pause and play
Press [6 L].
Station Search mode
Press [ 1 ] to enter Station Search mode.
Turn the volume knob to select
are displayed in alphabetical order) or
DAT E
(stations are displayed in date order),
then press the knob.
A–Z
(stations
BY
Turn the volume knob to select a desired
station, then press the knob.
Station Preset Memory
Press and hold [3] to [5] to memorize the
current station.
“STORED” appears.
Recall the stations in the memory
Press [3] to [5] to recall memorized station.
Display Selection
Press [SCRL DISP] repeatedly to select an
information.
STATION NAME ; TITLE/ARTIST ; ALBUM/ARTIST ;
P-TIME (playing time) ; CLOCK
Error messages
• RATING ERROR: Registration of Thumbs Up/Down has
failed.
• NO SKIPS: No more skips are allowed now. Retry after a
while.
• NO STATIONS: There is no receivable station.
• SEARCH ERROR: No station has been searched for.
• NOT EXIST: The registered station has been deleted or the
device is not the registered one.
5.4 New station creation
You can create a new station name using the name
of the song or artist you are listening.
Press and hold the volume knob.
“NEW STATION” appears.
Turn the volume knob to select
(creation from an artist name) or
(creation from a song name), then press the
knob.
“*** STATION” appears.
To cancel the New station registration
Press [ 6 ].
Error messages
• ADD ERROR: Registration of the station has failed.
• STATION LIMT: The number of registered stations has
reached the upper limit. Retry after deleting an unnecessary
station.
FROM ARTIST
FROM TRACK
5.5 Pandora source control
You can turn on/o the Pandora source.
Press [8SRC] to select
STANDBY
.
Press the volume knob to enter Function
mode.
“FUNCTION” appears.
Turn the volume knob to select
then press the knob.
Turn the volume knob to select
SRC
, then press the knob.
Turn the volume knob to select
then press the knob.
ON: Turns on the Pandora source.
OFF: Turns off the Pandora source.
INITIAL SET
PANDORA
ON
or
OFF
,
,
Press and hold [6] to exit.
|
16
KDC-X797/ KDC-BT755HD
English
|
17
Loading...