Kenwood KDC-BT520U User Manual [ru]

KDC-320UI KDC-BT520U

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

SINTOLETTORE STEREO COMPACT DISC

ISTRUZIONI PER L’USO

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti insieme ai normali rifiuti di casa. I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in grado di trattare questi prodotti e di smaltirne i loro componenti. Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all’ambiente. Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

For Israel

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Etichetta per i prodotti che impiegano raggi laser

L’etichetta si trova sul rivestimento o sulla scatola e serve ad avvertire che il componente impiega raggi laser che sono stati classificati come classe 1. Ciò significa che l’apparecchio utilizza raggi laser di una classe inferiore. Non c’è alcun pericolo di radiazioni pericolose all’esterno dell’apparecchio

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C Влажность : от 0% до 90%

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Dichiarazione di conformità alla Direttiva RE 2014/53/EU Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

English

Hereby, JVCKENWOOD declares that the radio equipment “KDC-320UI/KDC-BT520U” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio « KDC-320UI/KDC-BT520U » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KDC-320UI/KDC-BT520U” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KDC-320UI/KDC-BT520U” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KDC-320UI/KDC-BT520U” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “KDC-320UI/KDC-BT520U” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KDC-320UI/KDC-BT520U” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KDC-320UI/KDC-BT520U” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KDC-320UI/KDC-BT520U” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KDC-320UI/KDC-BT520U “ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

iii

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “KDC-320UI/KDC-BT520U” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “KDC-320UI/KDC-BT520U” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema » KDC-320UI/KDC-BT520U « v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KDC-320UI/KDC-BT520U “ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “KDC-320UI/KDC-BT520U” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KDC-320UI/KDC-BT520U» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „KDC-320UI/KDC-BT520U “ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „KDC-320UI/KDC-BT520U” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „KDC-320UI/KDC-BT520U“ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tarradju “KDC-320UI/KDC-BT520U” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “KDC-320UI/KDC-BT520U” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “KDC-320UI/KDC-BT520U” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “KDC-320UI/ KDC-BT520U” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-320UI/KDC-BT520U” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «KDC-320UI/KDC-BT520U» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KDC-320UI/KDC-BT520U» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

CONTENTS

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

RADIO 6

AUX 7

CD/USB/iPod/ANDROID 8

Spotify 10

BLUETOOTH® 11

AUDIO SETTINGS 17

DISPLAY SETTINGS 21

TROUBLESHOOTING 22

REFERENCES 24

Maintenance More information

SPECIFICATIONS 27

INSTALLATION/ CONNECTION 28

BEFORE USE

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•

USB rating is indicated on the main unit. To view, detach the faceplate.

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 30)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate of .

•

English indications are used for the purpose of explanation. You can select the display language from the

• [XX]

indicates the selected items.

• ( XX)

indicates references are available on the stated page.

( 3)

[FUNCTION]

menu.

( 5)

ENGLISH

BASICS

Faceplate

Attach

Volume knob

Detach button

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly.

Loading slot Display window

Flashes when the unit enters searching status.

Press

• Press and hold to turn off the power.

Press

repeatedly.

( 26)

Detach

How to reset

Reset the unit within 5seconds after detaching the faceplate.

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[YES], 5

), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

1 Turn the volume knob to select

(Spanish), then press the knob.

[ENG]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

[ENG]

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type”.

Set the clock and date

Press the volume knob to enter

2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select

[FUNCTION] [CLOCK]

[CLOCK ADJUST]

4 Turn the volume knob to make the settings, then press the knob.

Hour

5 Turn the volume knob to select 6 Turn the volume knob to select

Minute

[CLOCK FORMAT] [12H]

[FACTORY RESET]

(English),

[RUS]

(Russian) or

“PRESS” “VOLUME KNOB”.

, then press the knob.

[24H]

, then press the knob.

is set to

[SPA]

( 5)

To set the date

7 Turn the volume knob to select

knob.

8 Turn the volume knob to select

press the knob.

9 Turn the volume knob to select

[DATE FORMAT]

[DD/MM/YY]

[DATE SET]

, then press the knob.

, then press the

10 Turn the volume knob to make the settings, then press the

knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter

[FUNCTION]

3 Turn the volume knob to select an item (see the following

table), then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

AUDIO CONTROL

SWITCH PREOUT

(For )

REAR/SUB-W

connected to the line out terminals on the rear (through an external amplifier).

: Selects whether rear speakers or a subwoofer are

( 31)

[MM/DD/YY]

, then

Default:

ENGLISH

GETTING STARTED

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP

SOURCE SELECT

SPOTIFY SRC

BUILT-IN AUX

P-OFF WAIT

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

* Not applicable if 3-way crossover is selected.

(For ) When entering

ON OFF

•

ZONE 2 illumination changes to light blue color when you enter

irregardless of the

•

Refer to the illustration on page 21 for zone identification.

NORMAL

FM2/FM3/MW/LW).; regardless of the selected band.

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

:Automatically distinguishes between audio file disc and music CD.; 2:Forces

to play as a music CD. No sound can be heard if an audio file disc is played.

YES

For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

[FUNCTION]

:ZONE 1 illumination changes to white color.;

:ZONE 1 illumination remains as

:Memorizes one station for each preset button in each band (FM1/

:Activates the keypress tone.;

:Enables SPOTIFY in source selection.;

:Enables AUX in source selection.;

: 20minutes;

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated).

40M

...

[COLOR SELECT]

[EASY MENU]

MIX

setting.

:Memorizes one station for each preset button,

OFF

:Deactivates.

OFF

: 40minutes;

60M

OFF

:Disables.

: 60minutes;

color.

( 10)

( 7)

– – –

( 21)

:Cancels

[FUNCTION]

FACTORY RESET YES

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

ESPANOL

:Resets the settings to default (except the stored station).;

:Cancels

:The clock time is shown on the display even when the unit is

turned off.;

OFF

:Cancels.

Select the display language for information if applicable. By default,

[ENGLISH]

is selected.

[FUNCTION]

menu and music

Change the crossover type

Press repeatedly to enter STANDBY.

2 Press and hold number buttons 4 and 5 to enter crossover

select.

The current crossover type appears.

3 Turn the volume knob to select “2WAY” or “3WAY”, then press

the knob.

4 Turn the volume knob to select “YES” or “NO”, then press the

knob.

The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings,

( 19)

Caution

Select a crossover type according to how the speakers are connected. If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

( 30)

ENGLISH

RADIO

Search for a station

Press repeatedly to select RADIO.

2 Press repeatedly to select FM1/FM2/FM3/MW/LW. 3 Press S/T to search for a station.

• To change the searching method for S/T: Press

repeatedly. AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6).

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

[FUNCTION]

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH1 Turn the volume knob to select the available Program Type

CLOCK

TIME SYNC

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.;

:Cancels.

•

Selectable only if

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

: The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

press the knob.

Turn the volume knob to select the PTY language (

GERMAN

Press S/T to start searching.

:Synchronizes the unit’s time to the Radio Data System station time.;

OFF

:Cancels.

[NORMAL]

OFF

:Cancels.

OFF

:Cancels.

), then press the knob.

is selected for

OFF

: Cancels.

[PRESET TYPE]. ( 5)

:Cancels.

ENGLISH/FRENCH

Default:

( 7)

, then

ENGLISH

RADIO

Available Program Type for

SPEECH : NEWS, AFFAIRS, INFO

CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC

POP M

(music),

CLASSICS, OTHER M OLDIES, FOLK M

The unit will search for the Program Type categorized under

[MUSIC]

if selected.

•

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

[PTY SEARCH]

(information),

ROCK M

(music),

(music)

SPORT, EDUCATE, DRAMA

(music),

EASY M

JAZZ, COUNTRY, NATION M

(music),

LIGHT M

(music),

[SPEECH]

AUX

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

DVD/PORTABLE/GAME/VIDEO/TV

5 Press and hold to exit.

To return to the previous setting item, press .

for

[SOURCE SELECT]. ( 5)

[FUNCTION] [SYSTEM] [AUX NAME SET]

Portable audio player

, then press the knob.

ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional accessory) iPod/iPhone

ANDROID

USB cable (commercially available)

Label side

or accessory of the

To On the faceplate

Playback/pause Press .

Reverse/Fast-forward

Select a track/file

Select a folder

Repeat play

Random play

Press and hold S/T.

Press S/T.

Press / .

Press repeatedly.

TRACK REPEAT/ALL REPEAT

: Audio CD

FILE REPEAT/FOLDER REPEAT/ALL REPEAT FILE REPEAT/FOLDER REPEAT/REPEAT OFF

Press repeatedly.

DISC RANDOM/RANDOM OFF FOLDER RANDOM/RANDOM OFF

: Audio CD

: MP3/WMA/AAC/WAV/FLAC file, iPod or

: MP3/WMA/AAC/WAV/FLAC file : iPod or ANDROID

ANDROID

Press and hold

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions

to select

ALL RANDOM

to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

For ANDROID: Applicable only when

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.

For iPod/ANDROID: Applicable only when

For CD: Only for MP3/WMA/AAC files.

[BROWSE MODE]

is selected.

[MODE OFF]/[BROWSE MODE]

( 9)

is selected.

( 9)

ENGLISH

CD/USB/iPod/ANDROID

Select control mode

While in iPod USB source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

MODE OFF

While in ANDROID source, press 5 repeatedly.

BROWSE MODE

HAND MODE

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage

• Selected drive of a multiple drives device.

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

For iPod/ANDROID, applicable only when selected.

pause, file skip, fast-forward or reverse from this unit.

: Control iPod from this unit.

: Control Android device from this unit via KENWOOD

MUSIC PLAY application installed in the Android device.

: Control Android device using the Android device itself via

other media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

Select music drive

Class).

Listen to TuneIn Radio/TuneIn Radio Pro/Aupeo

Select a file from a folder/list

[MODE OFF]/[BROWSE MODE]

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

Press S/T to search at a preset skip search ratio.

( 10, [SKIP SEARCH])

• Pressing and holding S/T searches at a 10% ratio.

Alphabet search

You can search for a file according to the first character.

For iPod USB source

(applicable only for CD, USB and ANDROID source)

(applicable only for iPod USB and ANDROID source)

1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

• Select “ 3 Press S/T to move to the entry position.

” to search for a character other than AtoZ, 0to9.

• You can enter up to 3characters. 4 Press the volume knob to start searching.

For ANDROID source

1 Press / to enter character search. 2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z) _A_: Lower case letters (a to z)

-0-: Numbers (0 to 9) : Character other than AtoZ, 0to9

***

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

BT AUDIO source.)

• To return to the previous setting item, press .

• To cancel, press and hold

(Not applicable for

ENGLISH

CD/USB/iPod/ANDROID

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via USB input terminal).

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

For connection via Bluetooth.

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

USB

MUSIC DRIVE DRIVE CHANGE

SKIP SEARCH 0.5%/1%/5%/10%

, you can also make the settings in the same way as

( 16, 17)

[FUNCTION]

:The next drive (

[DRIVE 1]

[DRIVE 4]

) is selected automatically and playback starts. Repeat steps

to 3 to select the following drives.

: While listening to iPod USB or ANDROID source,

selects the skip search ratio over the total files.

Default:

Spotify

Preparation:

Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

Start listening

Open the Spotify application on your device.

2 Connect your device to the USB input terminal.

USB input terminal

3 Press repeatedly to select SPOTIFY.

Broadcast starts automatically.

To On the faceplate

Playback/pause Press .

Skip a track

Thumbs up or thumbs down

Start radio Press and hold 5.

KCA-iP102: 30-pin type, KCA-iP103: Lightning type.

Do not leave the cable inside the car when not using.

This feature is available for tracks in Radio only. If thumbs down is selected, the current track is skipped.

( 11)

[SOURCE SELECT]. ( 5)

KCA-iP102/KCA-iP103 (optional accessory) or accessory of the iPod/iPhone

Press S

Press / .

/T.

ENGLISH

Spotify

To On the faceplate

Repeat play

Random play

Available for premium account users only.

Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

1 2 Turn the volume knob to select a list type, then press the

The list types displayed differ depending on the

3 Turn the volume knob to select the desired song or

4 Press the volume knob to confirm.

You can browse through the list quickly by turning the

To cancel, press and hold

Press .

knob.

information sent from Spotify.

station.

volume knob quickly.

Press repeatedly.

REPEAT ALL/REPEAT ONE

Press repeatedly.

SHUFFLE ON/SHUFFLE OFF

REPEAT OFF

BLUETOOTH®

(for )

BLUETOOTH — Connection

Supported Bluetooth profiles Supported Bluetooth codecs

– Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone (supplied)

Microphone input jack

Adjust the

Secure using cord clamps (not supplied) if necessary.

microphone angle

Pair and connect a Bluetooth device for the first time

Press to turn on the unit.

2 Search and select this unit model name (KDC-BT5**) on the Bluetooth device.

“PAIRING”

appears on the display.

“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB”

• For some Bluetooth devices, you may need to enter the Personal Identification

Number (PIN) code immediately after searching.

3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed. Once pairing is completed, Bluetooth connection is established automatically. “BT1”

and/or “BT2” on the display window lights up.

ENGLISH

BLUETOOTH®

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device,

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

( 16)

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

(for )

15, [DEVICE DELETE]

Auto Pairing

When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. –

[AUTO PAIRING]

– KENWOOD MUSIC PLAY application is installed on the Android

device

( 8)

is set to

and

[BROWSE MODE]

[ON]. ( 15)

is selected.

( 9)

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

• The unit answers the call automatically if

( 13)

During a call:

• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.

The following operations may differ or not available depending on the connected phone.

To On the faceplate

First incoming call...

Answer a call

Reject a call

End a call

While talking on the first incoming call...

Answer another incoming call and hold the current call

Reject another incoming call

[AUTO ANSWER]

Press

or the volume knob or one of

the number buttons (1 to 6).

Press

is set to a selected time.

ENGLISH

BLUETOOTH®

(for )

To On the faceplate

While having two active calls...

End current call and activate held call

Swap between the current call and held call

Adjust the phone volume

[00]

[35]

(Default:

Switch between hands-free and private talk modes

[15]

Press .

Press

Turn the volume knob during a call.

)

• This adjustment will not affect the volume of the other sources.

Press

• Operations may vary according to the

during a call.

connected Bluetooth device.

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

MIC GAIN –10

NR LEVEL –5

ECHO CANCEL –5

to

+10(–4

number increased.

to+5(0):Adjust the noise reduction level until the least noise is

being heard during a phone conversation.

to+5(0):Adjust the echo cancellation delay time until the least

echo is being heard during a phone conversation.

):The sensitivity of the microphone increases as the

Answer incoming call automatically

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select 3 Turn the volume knob to select

[SETTINGS]

, then press the knob.

[AUTO ANSWER]

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

(in seconds)/

OFF

(default)

5 Press and hold to exit.

To return to the previous setting item, press .

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to

another phone.

“(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

CALL HISTORY

(Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O” indicates call made, “M” indicates call missed.

• Press

DISP

• “NO DATA” appears if there is no recorded call history.

Press the volume knob to call.

to change the display category (NUMBER or NAME).

ENGLISH

BLUETOOTH®

(for )

PHONE BOOK

NUMBER DIAL

VOICE

BATT LOW

NO SIGNAL/LOW/MID/MAX*:Shows the strength of the current received signal.

Functionality depends on the type of the phone used.

(Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

S/T

symbols.

to call.

(

, #, +).

S/T

Repeat steps

, then press the knob.

to move the entry position.

and 2 until you finish entering the phone number.

( Make a call using voice recognition)

• To select the desired first letter, turn the volume knob or press

Select “1” to search with numbers and select “

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob

•

The phonebook of the connected phone is automatically transferred to

the unit when pairing.

•

Contacts are categorized as: HM (home), OF (office), MO (mobile), OT

(other), GE (general)

•

This unit can display only non-accent letters. (Accent letters such as “Ú”

is shown as “U”.)

Turn the volume knob to select a number (0 to 9) or character

Press

Press the volume knob to call.

Speak the name of the contact you want to call or the voice command to control the phone functions.

MID/FULL*:Shows the strength of the battery.

” to search with

), press

Make a call using voice recognition

Press and hold to activate the voice recognition of the

connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select

[NUMBER DIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

, or

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored. To erase a contact from the preset memory, select

and store a blank number.

[NUMBER DIAL]

in step 2

Make a call from memory

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

ENGLISH

BLUETOOTH®

(for )

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

AUDIO SELECT

DEVICE DELETE

PIN CODE EDIT (0000)

RECONNECT ON

AUTO PAIRING ON

INITIALIZE YES

Selects the phone or audio device to connect or disconnect. “

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

•

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio

device at any time.

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S/T to move the entry position.

Repeat steps

Press the volume knob to confirm.

:The unit automatically reconnect when the last connected Bluetooth device is within

range.;

:The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device) when it is connected through USB input terminal.Depending on the operating system of the connected device, this function may not work. ;

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

:Cancels.

and 2 until you finish entering the PIN code.

OFF

:Cancels.

[YES]

[NO]

, then press the knob.

OFF

:Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

2 Search and select this unit model name (KDC-BT5**)

on the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP)

PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold unit.

compatibility

to turn off the

ENGLISH

BLUETOOTH®

(for )

BLUETOOTH — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

Press repeatedly to select BTAUDIO.

2 Operate the Bluetooth audio player to start playback.

To On the faceplate

Playback/pause Press .

Select group or folder Press

Reverse/Forward skip

Reverse/Fast-forward

Repeat play Press

Random play Press and hold to select

Select a file from a folder/list

Switch between connected Bluetooth audio devices

Pressing the “Play” key on the connected device itself also causes switching of sound output from

the device.

Operations and display indications may differ according to their availability on the connected device.

ENGLISH

/ .

Press S/T.

Press and hold S/T.

repeatedly.

ALL REPEAT, FILE REPEAT, REPEAT OFF

• Press

Refer to “Select a file from a folder/list” on page 9.

Press 5.

to select

RANDOM OFF

ALL RANDOM

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following

table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

REMOTE APP

SELECT

IOS YES

ANDROID YES

ANDROID LIST

Displayed only when

Select the device (IOS or ANDROID) to use the application.

:Selects iPhone/iPod to use the application via Bluetooth or connected via USB input terminal.; If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input terminal) to activate the application.

•

The connectivity of the application will be interrupted or disconnected

if: – You change from iPod BT source to any playback source connected

via the USB input terminal.

– You change from iPod USB source to iPod BT source.

:Selects Android smartphone to use the application via Bluetooth.;

: Cancels.

*:Selects the Android smartphone to use from the list.

[ANDROID]

[SELECT]

is set to

:Cancels.

[YES]

Default:

BLUETOOTH®

STATUS

(for )

Shows the status of the selected device.

IOS CONNECTED

connected via Bluetooth or USB input terminal.

IOS NOT CONNECTED ANDROID CONNECTED

smartphone connected via Bluetooth.

ANDROID NOT CONNECTED

application.

: You are able to use the application using the iPhone/iPod

: No IOS device is connected to use the application.

: You are able to use the application using the Android

: No Android device is connected to use the

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal.

• If you plug in an iPhone/iPod to the USB input terminal while listening to iPodBT source, the source automatically change to iPodUSB. Press

to select iPodBT if the device is still connected via Bluetooth.

( 8)

Internet radio via Bluetooth

Listen to Spotify

You can listen to Spotify on the iPhone/iPod/Android device via Bluetooth on this unit.

• Make sure the USB input terminal is not connected to any device.

Preparation:

Select

[ON]

for

[SPOTIFY SRC]

[SOURCE SELECT]. ( 5)

1 Open the Spotify application on your device. 2 Connect your device via Bluetooth connection.

( 11)

3 Press repeatedly to select SPOTIFY (for iPhone/iPod) or

SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

• You can operate Spotify in the same way as Spotify via USB input terminal.

( 10)

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter

(For

) Press AUD to enter

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

AUDIO CONTROL

SUB-W LEVEL

MANUAL EQ

62.5HZ LEVEL LEVEL –9

100HZ/160HZ/250HZ 400HZ/630HZ/1KHZ

1.6KHZ/2.5KHZ/4KHZ

6.3KHZ/10KHZ/16KHZ

Q FACTOR 1.35/1.50/2.00

PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER

BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5

LEVEL –50

output level.

The sound elements (frequency level, tone level, Q factor) are preset into each selection.

BASS EXTEND ON

LEVEL –9

memorize for each source. (Before making an adjustment, select

the source you want to adjust.)

Selects a preset equalizer suitable to the music genre. (Select

LV4/LV5

[FUNCTION]

LEVEL +10 (LEVEL 0

LEVEL +9 (LEVEL 0

:Adjust the quality factor.

[USER]

to use the settings made in

:Selects your preferred bass boost level.;

[AUDIO CONTROL]

): Adjusts the subwoofer

to the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

OFF

LEVEL +9 (LEVEL 0

:Turns on the extended bass.;

:Cancels.

):Adjusts the level to

directly.

Default:

[MANUAL EQ]

LV1/LV2/LV3

OFF

ENGLISH

):Adjusts

:Cancels.

AUDIO SETTINGS

LOUDNESS LEVEL1/LEVEL2

SUBWOOFER SET ON

FADER

BALANCE L15

VOLUME OFFSET –15

SOUND EFFECT

SOUND RECNSTR

(Sound reconstruction)

SPACE ENHANCE

SND REALIZER LEVEL1/LEVEL2/LEVEL3

STAGE EQ LOW/MIDDLE/HIGH

DRIVE EQ ON

SPEAKER SIZE

X’OVER

DTA SETTINGS

CAR SETTINGS

• : For 2-way crossover:

[SWITCH PREOUT]

•

[SUB-W LEVEL]

produce a well-balanced sound at a low volume level.;

:Turns on the subwoofer output.;

(Not applicable if 3-way crossover is selected.)

R15

source you want to adjust.)

(Not applicable for RADIO source and AUX source.)

:Creates realistic sound by compensating the high-frequency components and restoring

the rise-time of the waveform that are lost in audio data compression.;

(Not applicable for RADIO source.)

SMALL/MEDIUM/LARGE OFF

:Cancels.

OFF

:Cancels.

speakers.;

: Boosts the frequency to reduce the noise heard from outside the car or running noise

of the tyres.;

Depending on the crossover type you have selected crossover setting items will be shown. By default, 2-way crossover type is selected.

For settings,

is set to

is selectable only if

LV1/LV2

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

to +6 (0):Preset the initial volume level of each source. (Before adjustment, select the

OFF

:Cancels.

OFF

:Cancels.

20, Digital Time Alignment settings

[SUB-W]. ( 4)

[SUBWOOFER SET]

:Selects your preferred low and high frequencies boost to

OFF

:Cancels.

SML/MED/LRG

LV1/LV2/LV3

LOW/MID/HI

:Virtually adjust the sound position heard from the

( 19)

[SUB-W LEVEL]/[SUBWOOFER SET]

is set to

OFF

:Cancels.

:Virtually enhances the sound space.;

:Virtually makes the sound more realistic.;

( 5)

, 2-way crossover or 3-way

is selectable only if

[ON]

OFF

:Cancels.

Crossover settings

Below are the available setting items for 2-way crossover and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for optimum performance.

•

The frequency and slope settings are automatically set for the crossover of the selected speaker.

•

When 2-way crossover is selected, if for

[TWEETER]

[SPEAKER SIZE]

available.

• When 3-way crossover is selected, if for

[WOOFER]

X ‘ OVER

• [FRQ]

[F - HPF FRQ]/[R - HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]

[LPF FRQ]

selected speakers (high pass filter or low pass filter).

[THROUGH]

selected speakers.

•

[F - HPF SLOPE]/[R - HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE] [LPF SLOPE]/[SLOPE]:

Selectable only if a setting other than selected for the crossover frequency.

• [SW LPF PHASE]/[PHASE]:

output to be in line with the other speaker output.

• [GAIN LEFT]/[GAIN RIGHT]/[F - HPF GAIN]/[R - HPF GAIN] [SW LPF GAIN]/[GAIN]:

selected speaker.

[FRONT], [REAR]

, the

[X ‘ OVER]

setting of the speaker is not

[SPEAKER SIZE]

is not available.

: Adjusts the crossover frequency for the

is selected, all signals are sent to the

Adjusts the crossover slope.

Selects the phase of the speaker

Adjusts the output volume of the

and

, the

[NONE]

[SUBWOOFER]

[NONE]

[X ’ OVER]

[THROUGH]

is selected

for

is selected

setting of

ENGLISH

AUDIO SETTINGS

2-way crossover setting items

SPEAKER SIZE

FRONT SIZE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6 5×7/6×8/6×9/7×10

TWEETER

SMALL/MIDDLE/LARGE/NONE

(not connected)

REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9

SUBWOOFER

7×10/NONE

1*2

16CM/20CM/25CM/30CM/38CM OVER/NONE

(not connected)

(not connected)

X ' OVER

TWEETER FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ 10KHZ/12.5KHZ

GAIN LEFT

GAIN RIGHT

FRONT HPF F - HPF FRQ

–8

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

F - HPF SLOPE

F - HPF GAIN

–6DB/–12DB/–18DB/–24DB

–8

REAR HPF R - HPF FRQ

(Refer

FRONT HPF

R - HPF SLOPE

settings above.)

R - HPF GAIN

SUBWOOFER

*1*

LPF

SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ

120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

SW LPF SLOPE

SW LPF PHASE

SW LPF GAIN –8

–6DB/–12DB/–18DB/–24DB

REVERSE

(180°)/

NORMAL

(0°)

SPEAKER SIZE

X ' OVER

3-way crossover setting items

TWEETER

MID RANGE

WOOFER

TWEETER HPF FRQ

SMALL/MIDDLE/LARGE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9

16CM/20CM/25CM/30CM/38CM OVER/NONE

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ 10KHZ/12.5KHZ

SLOPE

PHASE

GAIN –8

MID RANGE HPF FRQ

–6DB/–12DB

REVERSE

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

HPF SLOPE

LPF FRQ

–6DB/–12DB

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ 10KHZ/12.5KHZ/THROUGH

WOOFER

LPF SLOPE

PHASE

GAIN –8

LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ

–6DB/–12DB

REVERSE

120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

SLOPE

PHASE

GAIN –8

For : Selectable only when

( 4)

Selectable only when

–6DB/–12DB

REVERSE

[SUBWOOFER SET]

(180°)/

is set to

NORMAL

(0°)

NORMAL

(0°)

NORMAL

(0°)

[SWITCH PREOUT]

[ON]. ( 18)

(not connected)

is set to

[SUB-W]

ENGLISH

AUDIO SETTINGS

Digital Time Alignment settings

Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle.

• For more information,

[DTA SETTINGS].

DTA SETTINGS

POSITION

DISTANCE 0CM

GAIN –8DB

DTA RESET YES

CAR SETTINGS

CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV

R-SP LOCATION

Determining the value for [DISTANCE] and [GAIN] of

Selects your listening position (reference point).

ALL

:Not compensating;

FRONT LEFT

• [FRONT ALL]

( 5)

610CM

making an adjustment, select the speaker you want to adjust.)

0DB

(Before making an adjustment, select the speaker you want to adjust.)

:Resets the settings (

[POSITION]

to default.; NO:Cancels.

Identify your car type and rear speaker location in order to make the adjustment for

MINIVAN(LONG)

compensating.

Selects the location of the rear speakers in your vehicle to calculate the furthest distance from the listening position selected (reference point).

• DOOR/REAR DECK

[OFF], [COMPACT], [FULL SIZE CAR], [WAGON]

• 2ND ROW/3RD ROW

[MINIVAN]

FRONT RIGHT:

:Front left seat;

is displayed only when

:Fine adjust the distance to compensate. (Before

:Fine adjust the output volume of the selected speaker.

[DISTANCE]

[DTA SETTINGS]

:Selects the type of vehicle.;

:Selectable only when

[MINIVAN(LONG)]

FRONT ALL

Front right seat;

:Front seat

[2-WAY X ’ OVER]

and

[GAIN]

) of the selected

OFF:

[CAR TYPE]

Not

is selected as

[SUV]

is selected.

is selected

•

Before making an adjustment for

speaker you want to adjust: When 2-way crossover is selected:

FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER

– You can only select

than

[NONE]

is selected for

When 3-way crossover is selected:

TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER

– You can only select

[SPEAKER SIZE]. ( 19)

• [R-SP LOCATION]

– 2-way crossover is selected. – A setting other than

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

[DISTANCE]

[REAR LEFT], [REAR RIGHT]

[REAR]

and

[SUBWOOFER]

[WOOFER]

if a setting other than

[CAR SETTINGS]

[NONE]

is selectable only if:

( 5)

is selected for

If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.

Determine the center of the currently set

Measure the distances from the reference

Calculate the differences between the

Set the

Adjust

Example: When listening position

and

[GAIN]

[DTA SETTINGS]

and

[SUBWOOFER]

[SPEAKER SIZE]. ( 19)

[NONE]

is selected for

[REAR]

[SPEAKER SIZE]. ( 19)

listening position as the reference point.

point to the speakers.

distance of the furthest speaker (rear speaker) and other speakers.

[DISTANCE]

individual speakers.

[GAIN]

for individual speakers.

[FRONT ALL]

, select the

if a setting other

[WOOFER]

calculated in step 3 for

is selected as the

ENGLISH

DISPLAY SETTINGS

: Zone identification for color and brightness settings

: Zone identification for brightness settings

Set the dimmer

Press and hold DISP to turn on or off the dimmer.

• If you have set hold this button.

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

[DIMMER TIME]

, it will be canceled once you press and

[FUNCTION]

Default:

DISPLAY

COLOR SELECT

DIMMER

BRIGHTNESS1 Select a zone. (See the illustration on the left column.)

TEXT SCROLL AUTO/ONCE

Preset colors:

BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1 GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2 ORANGERED

(For ) Select color for

Select a zone. (See the illustration on the left column.)

Select a color for the selected zone.

To make your own color, select will be stored in

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color (R/G/B) to adjust.

Turn the volume knob to adjust the level (0 to 9), then press the knob.

Dim the illumination.

ON DIMMER TIME

Turn the volume knob to adjust the

(Default:

2 0

or scroll only once.;

RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1

ALL ZONE, ZONE 1

INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B

[CUSTOM R/G/B]

:Dimmer is turned on.;

:Set the dimmer on and off time.

[ON]: 18:00; [OFF]: 6:00

to 31: Select your preferred brightness level for the selected zone.

:Select whether to scroll the display information automatically,

OFF

[CUSTOM R/G/B]

OFF

:Cancels.

and

:Cancels.

)

ZONE 2

separately.

/preset colors

. The color you have made

[ON]

time, then press the knob.

[OFF]

time, then press the knob.

ENGLISH

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit.

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as you intended them to play.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

CD/USB /iPod

Elapsed playing time is not correct.

“LOADING” appears when you enter search mode by pressing

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors.

Connect the antenna firmly.

Press and hold not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.

( 24)

( 3)

to forcibly eject the disc. Be careful

( 3)

Symptom Remedy

Correct characters are not displayed (e.g. album name).

“NA FILE” Make sure the disc contains supported audio files.

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem,

“NO DEVICE” Connect a USB device, and change the source to USB

“COPY PRO” A copy-protected file is played.

“UNSUPPORTED DEVICE”

CD/USB /iPod

“UNRESPONSIVE DEVICE” Make sure the device is not malfunction and reattach

“USB HUB IS NOT SUPPORTED”

•

The source does not

change to “USB” when you connect a USB device while listening to another source

•

“USB ERROR” appears

•

This unit can only display uppercase letters, numbers,

and a limited number of symbols.

•

Depending on the display language you have selected

( 5)

, some characters may not be displayed

correctly.

( 25)

consult your nearest service center.

again.

•

Check whether the connected device is compatible

with this unit and ensure the file systems are in supported formats.

•

Reattach the device.

the device.

This unit cannot support a USB device connected via a USB hub.

The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

( 25)

ENGLISH

TROUBLESHOOTING

Symptom Remedy

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

CD/USB /iPod

•

Sound cannot

be heard during playback.

•

Sound output only

from the Android device.

Cannot playback at

[BROWSE MODE]

ANDROID

“NO DEVICE” or “READING” keeps flashing.

Playback is intermittent or sound skips.

“ANDROID ERROR”/ “NADEVICE”

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in

[HAND MODE]

on the Android device and start playback.

•

If in

[HAND MODE]

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected Android

device is unable to route the audio signal to unit.

•

Make sure KENWOOD MUSIC PLAY APP is installed on the

Android device.

•

Reconnect the Android device and select the appropriate

control mode.

•

If this does not solve the problem, the connected Android

device does not support

•

Switch off the developer options on the Android device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected Android

device does not support

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

, launch any media player application

, relaunch the current media player

( 8)

[BROWSE MODE]. ( 25)

( 25)

Symptom Remedy

“DISCONNECTED” USB is disconnected from the head unit. Please make sure

“CONNECTING”

Spotify

“CHECK APP” The Spotify application is not connected properly, or user is

No Bluetooth device is detected.

Bluetooth pairing cannot be made.

Echo or noise is heard during a phone conversation.

Phone sound quality is poor.

Bluetooth® (for )

Voice calling method is not successful.

the device is connected properly through USB.

•

Connected via USB input terminal: The device is

connecting to the head unit. Please wait.

•

Connected via Bluetooth: The Bluetooth is disconnected.

Please check Bluetooth connection and make sure both the device and the unit are paired and connected.

not login. End the Spotify application and restart, then login to your Spotify account.

•

Search from the Bluetooth device again.

•

Reset the unit.

•

Make sure you have entered the same PIN code to both

the unit and Bluetooth device.

•

Delete pairing information from both the unit and the

Bluetooth device, then perform pairing again.

•

Adjust the microphone unit’s position.

•

Check the

•

Reduce the distance between the unit and the Bluetooth

device.

•

Move the car to a place where you can get a better signal

reception.

•

Use voice calling method in a more quiet environment.

•

Reduce the distance from the microphone when you

speak the name.

•

Make sure the same voice as the registered voice tag is

used.

( 3)

[ECHO CANCEL]

setting.

( 13)

( 11)

ENGLISH

TROUBLESHOOTING

REFERENCES

Symptom Remedy

Sound is being interrupted or skipped during playback of a Bluetooth audio player.

The connected Bluetooth audio player cannot be controlled.

“DEVICE FULL” The number of registered devices has reached its limit. Retry after

“N/A VOICE TAG” Make sure the same voice as the registered voice tag is used.

“NOT SUPPORT” The connected phone does not support Voice Recognition feature or

“NO ENTRY”/“NO PAIR” There is no registered device connected/found via Bluetooth.

Bluetooth® (for )

“ERROR” Try the operation again. If “ERROR” appears again, check if the

“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.

“HF ERROR XX”/ “BT ERROR”

“SWITCHING NG” The connected phones might not support phone switching feature.

(For )

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory.

When a call comes in, “CALL” appears.

•

To continue listening to the audio system during a call, press . “CALL” disappears and

the audio system resumes.

When the call ends, “CALL” disappears.

•

Reduce the distance between the unit and the Bluetooth audio

player.

•

Turn off, then turn on the unit and try to connect again.

•

Other Bluetooth devices might be trying to connect to the unit.

•

Check whether the connected Bluetooth audio player supports

Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)

•

Disconnect and connect the Bluetooth player again.

deleting an unnecessary device.

phonebook transfer.

device supports the function you have tried.

Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.

(The audio system pauses.)

(The audio system resumes.)

( 15, DEVICE DELETE)

( 30)

Maintenance

Cleaning the unit

Wipe off dirt on the faceplate with a dry silicone or soft cloth.

Cleaning the connector

Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs

•

Do not touch the recording surface of the disc.

•

Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

•

Do not use any accessories for the disc.

•

Clean from the center of the disc and move outward.

•

Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

•

When removing discs from this unit, pull them out horizontally.

•

Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

More information

For: – Latest firmware updates and latest compatible item list

– KENWOOD original application – Any other latest information

Visit <www.kenwood.com/cs/ce/>.

General

•

This unit can only play the following CDs:

•

For detailed information and notes about the playable audio files, visit

<www.kenwood.com/cs/ce/audiofile/>.

ENGLISH

REFERENCES

Playable files

•

Playable audio file:

For disc: MP3 (.mp3), WMA (.wma), AAC (.aac) For USB mass storage class device: MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device. The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that are dirty.

•

Recordable/ReWritable discs that have not been finalized.

•

8cm CD. Attempting to insert using an adapter may cause malfunction.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not fully support Android Open Accessory

(AOA) 2.0.

•

If the Android device supports both mass storage class device and AOA 2.0, this unit always

playback via AOA 2.0 as priority.

About Spotify

•

Spotify application supports: – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus (iOS 8 or above) – iPod touch (5th and 6th generation) – Android OS 4.0.3 or above

•

Spotify is a third-party service, therefore the specifications are subject to change without

prior notice. Accordingly, compatibility may be impaired or some or all of the services may become unavailable.

•

Some functions of Spotify cannot be operated from this unit.

•

For issues using the application, please contact Spotify at <www.spotify.com>.

About USB devices

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is other than 5V and exceeds 1.5A.

About iPod/iPhone

•

Via USB:

Made for – iPod touch (5th and 6th generation) – iPod nano (7th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus

•

Via Bluetooth (for )

Made for – iPod touch (5th and 6th generation) – iPhone 4S, 5, 5S, 5C, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus

•

You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

•

Depending on the version of the operating system of the iPod/iPhone, some functions may

not operate on this unit.

About Bluetooth (for )

•

Depending on the Bluetooth version of the device, some Bluetooth devices may not be able

to connect to this unit.

•

This unit may not work with some Bluetooth devices.

•

Signal conditions vary, depending on the surroundings.

ENGLISH

REFERENCES

Change the display information

Each time you press

•

If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information

(eg. station name, playing time) appears.

Source name

STANDBY Source name (Date/Clock)

RADIO Frequency (Date/Clock)

CD or USB

iPod USB or ANDROID

SPOTIFY Context title (Date/Clock)

AUX Source name (Date/Clock)

DISP

, the display information changes.

Display information (for

(For FM Radio Data System stations only)

Station name (Date/Clock) Radio text (Date/Clock) Radio text+ (R.TEXT+)

(For CD-DA)

Track title (Artist) Track title (Disc name) Track title (Date/Clock) Playing time (Date/Clock)

(For MP3/WMA/AAC/WAV/FLAC files)

Song title (Artist) Song title (Album title) Song title (Date/Clock) File name (Folder name) (Date/Clock)

When Song title (Artist) Playing time (Date/Clock)

(back to the beginning)

Title (Artist) Title (Date/Clock) Frequency (Date/Clock)

(back to the beginning)

File name (Date/Clock) Playing time

(back to the beginning)

[MODE OFF]/[BROWSE MODE]

Song title (Album name) Song title (Date/Clock)

Song title (Date/Clock) Playing time (Date/Clock)

is selected

(back to the beginning)

Song title (Artist) Song title (Album name)

( 9)

)

Source name

STANDBY Source name

RADIO Frequency

(For FM Radio Data System stations only)

Station name Radio text Radio text+ Title/Artist Frequency Clock

(back to the beginning)

CD or USB

iPod USB/ iPodBT or ANDROID

SPOTIFY/ SPOTIFY BT

BT AUDIO Song title/Artist

AUX Source name

(For CD-DA)

Disc name/Artist Track title/Artist Playing time Clock (back to the beginning)

(For MP3/WMA/AAC/WAV/FLAC files)

Song title/Artist Album title/Artist Folder name File name Playing time

When

[MODE OFF]/[BROWSE MODE]

Song title/Artist (back to the beginning)

Context title

Clock (back to the beginning)

(back to the beginning)

Display information (for

Clock (back to the beginning)

is selected

Album title/Artist Playing time Clock

Song title Artist name Album name Playing time

Album title/Artist Playing time Clock

Clock (back to the beginning)

( 9)

)

ENGLISH

+ 98 hidden pages