• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has
been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
• iPhone, iPod, iPod classic, iPod nano, iPod touch and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
• Lightning is a trademark of Apple Inc.
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc., used with permission.
• The “AAC” logo is a trademark of Dolby Laboratories.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under
license. Other trademarks and trade names are those of their respective owners.
and cancel the demonstration
2 Set the clock and date
3 Set the initial settings
RADIO 6
AUX 7
CD / USB / iPod / ANDROID 8
Pandora®
(Not applicable for Korean models)
10
BLUETOOTH® 12
AUDIO SETTINGS 18
DISPLAY SETTINGS 20
TROUBLESHOOTING 21
REFERENCES 24
Maintenance
More information
INSTALLATION /
CONNECTION 26
SPECIFICATIONS 28
IMPORTANT
• To ensure proper use, please read through this manual before using this product. It is especially important
that you read and observe Warning and Caution in this manual.
• Please keep the manual in a safe and accessible place for future reference.
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accidents.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of
the output level.
General:
• Avoid using the external device if it might hinder safe driving.
•
Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
•
Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.
• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to
evaporate.
• USB rating is indicated on the main unit. To view, detach the faceplate.
• Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the
antenna control wire connected (
a low ceiling area.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or
equivalent type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used
batteries promptly. If swallowed, contact a physician immediately.
How to read this manual
• Operations are explained mainly using buttons on the faceplate of .
• English indications are used for the purpose of explanation. You can select the display language from the
[
FUNCTION
• [
• (
] menu. ( 5)
XX
] indicates the selected items.
XX) indicates references are available on the stated page.
( 3)
27). Turn off the unit or change the source to STANDBY when parking at
2
BASICS
Faceplate
Display window
Remote control (RC-406)
(supplied for )
Volume knob
Detach button
ToOn the faceplateOn the remote control
Turn on the power
Adjust the volumeTurn the volume knob.Press
Select a source
Change the display informationPress DISP repeatedly. (
Loading slot
searching status.
: Flashes when the unit enters
How to resetAttachDetach
Press the switch twice
within 5seconds
after detaching the
faceplate.
Press
• Press and hold to turn off the power.
Press
.
repeatedly.
25)( Not available )
Lights up when
Bluetooth
connection is
established.
(
12)
:
How to replace the battery
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
or .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
Remote sensor (Do not expose to
bright sunlight.)
Pull out the
insulation sheet
when using for the
first time.
ENGLISH
3
GETTING STARTED
1
Select the display language and cancel the
demonstration
When you turn on the power for the first time (or [
RESET
] is set to [
“PRESS” “VOLUME KNOB”
1 Turn the volume knob to select [
(Turkish), then press the knob.
[
ENG
Then, the display shows: “CANCEL DEMO”
“VOLUME KNOB”.
YES
], 5), the display shows: “SEL LANGUAGE”
] is selected for the initial setup.
ENG
2 Press the volume knob.
[
YES
] is selected for the initial setup.
3 Press the volume knob again.
“DEMO OFF” appears.
Then, the display shows the selected crossover type:
“2-WAY X ’ OVER” or “3-WAY X ’ OVER”
• To change the crossover type, see “Change the crossover
type” (
5).
FACTORY
] (English) or [
“PRESS”
TUR
2
Set the clock and date
Press the volume knob to enter [
1
2 Turn the volume knob to select [
To adjust the clock
3 Turn the volume knob to select [
FUNCTION
].
CLOCK
], then press the knob.
CLOCK ADJUST
], then press the knob.
4 Turn the volume knob to make the settings, then press the knob.
Hour
5 Turn the volume knob to select [
6 Turn the volume knob to select [
To set the date
7 Turn the volume knob to select [
8 Turn the volume knob to select [
9 Turn the volume knob to select [
]
10 Turn the volume knob to make the settings, then press the knob.
Day
Minute
Month Year or Month Day Year
CLOCK FORMAT
12H
] or [
24H
DATE FORMAT
DD/MM/YY
DATE SET
], then press the knob.
], then press the knob.
], then press the knob.
], then press the knob.
] or [
11 Press and hold to exit.
To return to the previous setting item, press .
3
Set the initial settings
Press repeatedly to enter STANDBY.
1
2 Press the volume knob to enter [
3 Turn the volume knob to select an item (
FUNCTION
].
5
), then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press .
MM/DD/YY
], then press the knob.
4
GETTING STARTED
AUDIO CONTROL
SWITCH
PREOUT*
DISPLAY
EASY MENU
TUNER SETTING
PRESET TYPE
SYSTEM
KEY BEEP*
TDF ALARM*ON
SOURCE SELECT
PANDORA SRC
BUILT-IN AUX ON
CD READ1
*
Not applicable if 3-way crossover is selected.
(For )
REAR/ SUB-W
connected to the line out terminals on the rear (through an external
amplifier).
(For )
ON
entering [
remain as [
NORMAL
(FM1/ FM2/ FM3/ AM/ SW1/ SW2).;
each preset button, regardless of the selected band.
ON
set to OFF.;
ON
2
disc is played.
: Selects whether rear speakers or a subwoofer are
:Both display and button illumination change to white color when
FUNCTION
COLORSELECT
:Memorizes one station for each preset button in each band
:Activates the keypress tone.;
: Activates the alarm if you forget to detach the faceplate when ACC is
OFF
: Deactivates.
:Enables PANDORA in source selection.;
:Enables AUX in source selection.;
:Automatically distinguishes between audio file disc and music CD.;
:Forces to play as a music CD. No sound can be heard if an audio file
].;
OFF
:Both display and button illumination
] color. ( 21)
MIX
:Memorizes one station for
OFF
:Deactivates.
OFF
OFF
:Disables. ( 7)
Default:
:Disables. ( 10)
XX
F/W UPDATE
UPDATE SYSTEM
F/W UP xx.xx
FACTORY RESET YES
CLOCK
CLOCK DISPLAY
ENGLISH
TURKCE
YES
:Starts upgrading the firmware.; NO:Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
:Resets the settings to default (except the stored station).;
NO
:Cancels.
ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF
:Cancels.
Select the display language for [
information if applicable.
By default, [
ENGLISH
] is selected.
FUNCTION
] menu and music
Change the crossover type
Press repeatedly to enter STANDBY.
1
2 Press and hold number buttons 4 and 5 to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4 Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold
• To adjust the selected crossover settings, (
.
19).
Caution
Select a crossover type according to how the speakers are connected.
(
27)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
ENGLISH
5
RADIO
Search for a station
Press repeatedly to select TUNER.
1
2 Press repeatedly (or press on RC-406) to
select FM1/ FM2/ FM3/ AM/ SW1/ SW2.
3 Press (or press on RC-406) to search for a
station.
• To change the searching method for
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons (1to6).
• To select a stored station: Press one of the number buttons (1to6) (or
press one of the number buttons (1to6) on RC-406).
Direct Access Tuning (using RC-406)
Press DIRECT to enter Direct Access Tuning.
1
2 Press the number buttons to enter a frequency.
3 Press to search for a station.
• To cancel, press or DIRECT.
• If no operation is done for 10seconds after step
is automatically canceled.
: Press
2, Direct Access Tuning
Other settings
Press the volume knob to enter [
1
FUNCTION
].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
TUNER SETTING
LOCAL SEEK
AUTO
MEMORY
MONO SETON
NEWS SETON
REGIONALON
AF SETON
TION
ON
:Searches only AM/ SW1/ SW2 stations with good reception. ;
OFF
:Cancels.
•
Settings made are applicable only to the selected source/station. Once
you change the source/station, you need to make the settings again.
YES
:Automatically starts memorizing 6 stations with good reception.;
NO
:Cancels.
•
Selectable only if [
:Improves the FM reception, but the stereo effect may be lost.;
OFF
:Cancels.
: The unit will temporarily switch to News Programme if available. ;
OFF
: Cancels.
: Switches to another station only in the specific region using the “AF”
control.;
: Automatically searches for another station broadcasting the same
program in the same Radio Data System network with better reception
when the current reception is poor.;
:Allows the unit to temporarily switch to Traffic Information if available
(“TI” lights up).;
OFF
:Cancels.
OFF
NORMAL
:Cancels.
] is selected for [
OFF
:Cancels.
PRESET TYPE
]. ( 5)
XX
6
RADIO
PTY SEARCH1 Press the volume knob to enter PTY language selection.
CLOCK
TIME SYNC
2
Turn the volume knob to select the PTY language (
GERMAN
3
4
ON
OFF
), then press the knob.
Turn the volume knob to select the available Program Type (see the
following).
Press to start searching.
:Synchronizes the unit’s time to the Radio Data System station time.;
:Cancels.
ENGLISH/ FRENCH
AUX
Preparation:
Select [
ON
] for [
/
BUILT-IN AUX
Start listening
Connect a portable audio player (commercially available).
1
Auxiliary input jack
]. ( 5)
Portable audio player
Available Program Type for PTY SEARCH
SPEECH : NEWS, AFFAIRS, INFO
CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL
RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT
MUSIC
:
POP M
(music),
CLASSICS, OTHER M
OLDIES, FOLK M
The unit will search for the Program Type categorized under [
[
MUSIC
] if selected.
MONO SET
]/ [
• [
only when the band is FM1/ FM2/ FM3.
• If the volume is adjusted during reception of traffic information, alarm
or news bulletin, the adjusted volume is memorized automatically. It
will be applied the next time traffic information, alarm or news bulletin
is turned on.
NEWS SET
(information),
ROCK M
(music),
(music)
]/ [
REGIONAL
SPORT, EDUCATE, DRAMA
(music),
EASY M
JAZZ, COUNTRY, NATION M
]/ [
AF SET
]/ [TI]/ [
(music),
PTY SEARCH
LIGHT M
(music),
(music),
SPEECH
] is selectable
,
,
] or
3.5mm stereo mini plug with “L” shaped
connector (commercially available)
2 Press repeatedly to select AUX.
3 Turn on the portable audio player and start playback.
Set the AUX name
While listening to a portable audio player connected to the unit...
1 Press the volume knob to enter [
2 Turn the volume knob to select [
3 Turn the volume knob to select [
FUNCTION
].
SYSTEM
], then press the knob.
AUX NAME SET
], then press the knob.
4 Turn the volume knob to select an item, then press the knob.
AUX
(default)/
DVD/ PORTABLE/ GAME/ VIDEO/ TV
5 Press and hold to exit.
To return to the previous setting item, press .
ENGLISH
7
CD / USB / iPod / ANDROID
Start playback
The source changes automatically and
playback starts.
M
Eject disc
USB input terminal
USB
CA-U1EX (max.: 500mA)
(optional accessory)
iPod/iPhone
KCA-iP102 / KCA-iP103 (optional
accessory)
of the iPod/iPhone
ANDROID
Micro USB 2.0 cable
(commercially available)
1
*
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
2
*
Do not leave the cable inside the car when not using.
Label side
1
*
or accessory cable
2
*
3
*
*
2
ToOn the faceplateOn the remote control
Playback / pausePress .
4
Reverse / Fast-forward
*
Press and hold .Press and hold .
Select a track/filePress
5
Select a folder
Repeat play
*
6
*
Press .Press .
Press repeatedly.
TRACK REPEAT/ ALL REPEAT
FILE REPEAT/ FOLDER REPEAT/ ALL REPEAT
FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF
6
Random play
*
Press repeatedly.
DISC RANDOM/ RANDOM OFF
FOLDER RANDOM/ RANDOM OFF
.Press .
: Audio CD
: Audio CD
Press
.
: MP3/WMA/AAC/WAV/FLAC file
: iPod or ANDROID
: MP3/WMA/AAC/WAV/FLAC file, iPod or
ANDROID
7
Press and hold
3
*
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions
to select
ALL RANDOM
*
.
to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device
before connecting. (
4
*
For ANDROID: Applicable only when [
5
*
For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ ANDROID.
6
*
For iPod/ ANDROID: Applicable only when [
7
*
For CD: Only for MP3/WMA/AAC files.
24)
BROWSE MODE
MODE OFF
] is selected. ( 9)
]/ [
BROWSE MODE
] is selected. ( 9)
8
CD / USB / iPod / ANDROID
Select control mode
While in IPOD source, press 5 repeatedly.
MODE ON
: Control iPod using the iPod itself. However, you can still play/
MODE OFF
While in ANDROID source, press 5 repeatedly.
BROWSE MODE
HAND MODE
pause, file skip, fast-forward or reverse from this unit.
: Control iPod from this unit.
: Control Android device from this unit via KENWOOD MUSIC
PLAY application installed in the Android device.
: Control Android device using the Android device itself via
other media player applications installed in the Android
device. However, you can still play/pause and file skip from
this unit.
Select music drive
Press 5 repeatedly.
Stored songs in the following drive will be played back.
• Selected internal or external memory of a smartphone (Mass Storage Class).
• Selected drive of a multiple drives device.
Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo
While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the
iPod/iPhone to the USB input terminal of the unit.
• The unit will output the sound from these applications.
Direct Music Search (using RC-406)
Press DIRECT.
1
2 Press the number buttons to enter a track/file number.
3 Press to search for music.
• To cancel, press or DIRECT.
• Not available if Random Play is selected.
• Not applicable for iPod and ANDROID.
Select a file from a folder/list
Press .
1
2 Turn the volume knob to select a folder/list, then press the
knob.
3 Turn the volume knob to select a file, then press the knob.
Quick Search
If you have many files, you can search through them quickly.
Turn the volume knob quickly to browse through the list
quickly.
–
Not applicable for iPod.
(or)
Press to search at a preset skip search ratio. (
[
SKIP SEARCH
• Pressing and holding
– Not applicable for audio CD and MP3/ WMA/ AAC/ WAV/ FLAC files.
(or)
Alphabet search
If you have many files in the iPod, you can search through them
quickly according to the first character of the file name.
])
searches at a 10% ratio.
(applicable only for iPod)
Turn the volume knob quickly to enter character search.Turn the volume knob to select the character.
To search for a character other than A to Z and 0to9, enter
only “
”.
*
Press S/T to move to the entry position.
• You can enter up to 3characters.
Press the volume knob to start searching.
• To return to the root folder/ first file/ top menu, press 5. (
applicable for BT AUDIO source.
• To return to the previous setting item, press
• To cancel, press and hold
• For iPod, applicable only when [
• For ANDROID, applicable only when [
)
.
MODE OFF
] is selected.
BROWSE MODE
Not
.
] is selected.
10,
ENGLISH
9
CD / USB / iPod / ANDROID
Other settings
Press the volume knob to enter [
1
2 Turn the volume knob to select an item (see the
following table), then press the knob.
3 Repeat step 2 until the desired item is selected or
activated.
4 Press and hold to exit.
To return to the previous setting item, press .
USB
MUSIC DRIVE DRIVE CHANGE
SKIP SEARCH 0.5%/ 1%/ 5%/ 10%
selected automatically and playback starts.
Repeat steps
selects the skip search ratio over the total files.
1
to 3 to select the following drives.
FUNCTION
].
:The next drive ([
DRIVE 1
] to [
: While listening to iPod or ANDROID,
Default:
DRIVE 4
Pandora®
Preparation:
Install the latest version of the Pandora application on your device (iPhone/ iPod
touch), then create an account and log in to Pandora.
• Select [
ON
(Not applicable for Korean models)
] for [
PANDORA SRC
]. ( 5)
Start listening
Open the Pandora application on your device.
1
2 Connect your device to the USB input terminal.
USB input terminal
XX
]) is
KCA-iP102 / KCA-iP103 (optional accessory)
accessory cable of the iPod/iPhone
1
*
or
2
*
3 Press repeatedly to select PANDORA.
Broadcast starts automatically.
ToOn the faceplateOn the remote control
Playback / pause
Skip a track
Thumbs up or thumbs
3
*
down
1
*
KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type
2
*
Do not leave the cable inside the car when not using.
3
*
If thumbs down is selected, the current track is skipped.
Press
Press T.
Press .
.Press
Press
Press
.
.
/ .
10
Pandora®
(Not applicable for Korean models)
Create and save a new station
Press .
1
2 Turn the volume knob to select [
3 Turn the volume knob to select [
press the knob.
A new station is created based on the current song or artist.
NEW STATION
FROM TRACK
], then press the knob.
] or [
FROM ARTIST
], then
4 Press and hold one of the number buttons (1to5) to store.
To select a stored station, press one of the number buttons (1to5).
Search for a registered station
Press .
1
2 Turn the volume knob to select an item, then press the knob.
[
SORT BY DATE
[
SORT BY A-Z
]:According to the registered date
]:Alphabetical order
3 Turn the volume knob to select the desired station, then press the
knob.
To cancel, press and hold
.
(or using RC-406)
Press J / K to search for a station, then press .
Bookmark current song information
Press and hold the volume knob.
“BOOKMARKED” appears and the information is stored to your device.
The bookmark is available on your Pandora account but not on this unit.
Delete a station
While listening to PANDORA...
1 Press the volume knob to enter [
2 Turn the volume knob to select [
3 Turn the volume knob to select [
4 Turn the volume knob to select [
press the knob.
FUNCTION
].
SYSTEM
], then press the knob.
STATION DEL
SORT BY A-Z
], then press the knob.
] or [
SORT BY DATE
], then
5 Turn the volume knob to select the desired station to delete, then
press the knob.
6 Turn the volume knob to select [
YES
], then press the knob.
7 Press and hold to exit.
To return to the previous setting item, press .
ENGLISH
11
BLUETOOTH®
BLUETOOTH — Connection
Supported Bluetooth profiles
– Hands-Free Profile (HFP)
– Advanced Audio Distribution Profile (A2DP)
– Audio/Video Remote Control Profile
(AVRCP)
– Serial Port Profile (SPP)
– Phonebook Access Profile (PBAP)
Supported Bluetooth codecs
– Sub Band Codec (SBC)
– Advanced Audio Coding (AAC)
Connect the microphone
Rear panel
Microphone (supplied)
Microphone input jack
Adjust the
microphone angle
Secure using cord clamps (not
supplied) if necessary.
Pair and connect a Bluetooth device for the first time
Press to turn on the unit.
1
2 Search and select this unit model name (KDC-BT6
device.
“PAIRING”
“PASS XXXXXX” Device name “PRESS” “VOLUME KNOB” scrolls on the display.
U/ KDC-BT5**U) on the Bluetooth
**
• For some Bluetooth devices, you may need to enter the Personal Identification Number (PIN)
code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
• This unit supports Secure Simple Pairing (SSP).
• Up to 10 devices can be registered (paired) in total.
• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you
reset the unit. To delete the paired device,
Once pairing is completed, Bluetooth connection is established automatically.
• : “BT1” and/or “BT2” indicator on the faceplate lights up.
•
• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any
time.
• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the
device to the unit manually.
• Refer to the instruction manual of the Bluetooth device for more information.
: “BT1” and/or “BT2” on the display window lights up.
16, [
DEVICE DELETE
].
Auto Pairing
When you connect iPhone/ iPod touch/ Android device to the USB input terminal, pairing request
(via Bluetooth) is automatically activated.
Press the volume knob to pair once you have confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected device is turned on.
– [
AUTO PAIRING
– KENWOOD MUSIC PLAY application is installed on the Android device (
selected (
] is set to [ON]. ( 16)
9).
8) and [
BROWSE MODE
] is
12
BLUETOOTH®
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
•
flashes.
• The unit answers the call automatically if [
is set to a selected time. (
During a call:
•
the settings made for [
illuminates in green color.
• If you turn off the unit or detach the faceplate, the
Bluetooth connection is disconnected.
The following operations may differ or not available
depending on the connected phone.
:
ZONE 2 illuminates in green color and
20, 21
) and ZONE 2
AUTO ANSWER
14)
:
The display illuminates according to
DISPLAY
] (
ToOn the faceplateOn the remote control
First incoming call...
Answer a call
Reject a call
End a call
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
]
call
While having two active calls...
End current call and
activate held call
Swap between the
current call and held call
Adjust the phone volume
[00]
to
[35]
(Default:
Switch between hands-free
and private talk modes
[15]
)
Press
or the volume knob
or one of the number buttons
(1 to 6).
Press
Press
Press
Press
Press
Press
Turn the volume knob during
a call.
• This adjustment will not
affect the volume of the other
sources.
Press
• Operations may vary
according to the connected
Bluetooth device.
.
.
.Press .
.
.
. Press .
during a call.
Press
Press
Press
Press
Press
( Not available )
( Not available )
.
.
.
.
.
ENGLISH
13
BLUETOOTH®
Improve the voice quality
While talking on the phone...
1 Press the volume knob to enter [
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
MIC GAIN–10
NR LEVEL–5
ECHO CANCEL–5
—
+10(–4
the number increased.
—+5(0):Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
—+5(0):Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
Make the settings for receiving a call
Press to enter Bluetooth mode.
1
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected or activated.
4 Press and hold to exit.
To return to the previous setting item, press .
FUNCTION
].
Default:
):The sensitivity of the microphone increases as
SETTINGS
AUTO ANSWER
BATT/SIGNAL*
XX
*
Functionality depends on the type of the phone used.
1
—30:The unit answers incoming call automatically in the selected time
(in seconds).;
(For )
AUTO
Bluetooth device and the Bluetooth device is connected.;
time is shown.
OFF
:Cancels.
:Shows the strength of the battery and signal when the unit detects a
OFF
Make a call
You can make a call from the call history, phonebook, or dialing the number.
Call by voice is also possible if your mobile phone has the feature.
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
CALL HISTORY
(Applicable only if the phone supports PBAP)
1
Press the volume knob to select a name or a phone number.
•
the lower part of the display to indicate the previous call status.
“M” indicates call missed.
• Press
• “NO DATA” appears if there is no recorded call history.
NUMBER DIAL1 Turn the volume knob to select a number (0 to 9) or character ( , #, +).
VOICE
BATT LOW/ MID/ FULL*:Shows the strength of the battery.
NO SIGNAL/ LOW/ MID/ MAX*:Shows the strength of the current received signal.
*
Functionality depends on the type of the phone used.
(Applicable only if the phone supports PBAP)
1
Turn the volume knob quickly to enter alphabet search mode (if the
phonebook contains many contacts).
The first menu (ABCDEFGHIJK) appears.
• To go to the other menu (LMNOPQRSTUV or WXYZ1
• To select the desired first letter, turn the volume knob or press
Select “1” to search with numbers and select “
symbols.
2
Turn the volume knob to select a name, then press the knob.
3
Turn the volume knob to select a phone number, then press the knob to
call.
•
The phonebook of the connected phone is automatically transferred to the
unit when pairing.
•
Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL or
HM (home), OF (office), MO (mobile), OT (other), GE (general)
•
This unit can display only non-accent letters. (Accent letters such as “Ú” is
showns as “U”.)
2
Press to move the entry position.
Repeat steps
3
Press the volume knob to call.
(or using RC-406)
1
Press the number buttons (0 to 9) to enter the phone number.
2
Press to call.
Speak the name of the contact you want to call or the voice command to
control the phone functions.
(
Make a call using voice recognition
, then press the knob.
1
and 2 until you finish entering the phone number.
)
), press .
*
” to search with
*
Make a call using voice recognition
Press and hold to activate the voice recognition of the
1
connected phone.
2 Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to
the instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Settings in memory
Store a contact in memory
You can store up to 6 contacts into the number buttons (1 to 6).
1 Press to enter Bluetooth mode.
2 Turn the volume knob to select [
[
NUMBER DIAL
], then press the knob.
CALL HISTORY
], [
PHONE BOOK
], or
3 Turn the volume knob to select a contact or enter a phone
number.
If a contact is selected, press the volume knob to show the phone
number.
4 Press and hold one of the number buttons (1 to 6).
“STORED” appears when the contact is stored.
To erase a contact from the preset memory, select [
step
2 and store a blank number.
NUMBER DIAL
] in
Make a call from memory
Press to enter Bluetooth mode.
1
2 Press one of the number buttons (1 to 6).
3 Press the volume knob to call.
“NO MEMORY” appears if there is no contacts stored.
ENGLISH
15
BLUETOOTH®
Other settings
Press the volume knob to enter
1
[FUNCTION
].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press .
Default:
BT MODE
PHONE SELECT
AUDIO SELECT
DEVICE DELETE
PIN CODE EDIT
(0000)
RECONNECTON
AUTO PAIRINGON
INITIALIZEYES
Selects the phone or audio device to connect or disconnect.
“
” appears in front of the device name when connected.
*
•
You can only connect a maximum of two Bluetooth phones and one
Bluetooth audio device at any time.
1
Turn the volume knob to select a device to delete, then press the knob.
2
Turn the volume knob to select [
Changes the PIN code (up to 6 digits).
1
Turn the volume knob to select a number.
2
Press to move the entry position.
Repeat steps
3
Press the volume knob to confirm.
:The unit automatically reconnect when the last connected Bluetooth
device is within range.;
:The unit automatically pair supported Bluetooth device (iPhone/
iPod touch/ Android device) when it is connected through USB input
terminal.Depending on the operating system of the connected device, this
function may not work. ;
:Initializes all the Bluetooth settings (including stored pairing,
phonebook, and etc.).;
1
and 2 until you finish entering the PIN code.
OFF
OFF
NO
:Cancels.
:Cancels.
:Cancels.
YES
] or [NO], then press the knob.
Bluetooth test mode
You can check the connectivity of the supported profile between the
Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1 Press and hold .
“PLEASE PAIR YOUR PHONE PIN 0000” appears.
2 Search and select this unit model name (KDC-BT6
KDC-BT5
3 Operate the Bluetooth device to confirm pairing.
“TESTING” flashes on the display.
XX
The connectivity result (OK or NG) appears after the test.
Press repeatedly to select BTAUDIO (or press SRC on RC-406).
1
2 Operate the Bluetooth audio player to start playback.
ToOn the faceplateOn the remote control
Playback / pause
Select group or folderPress
Reverse / Forward skipPress
Reverse / Fast-forwardPress and hold
Repeat playPress
Random playPress and hold
Select a file from a
folder/list
Operations and display indications may differ according to their availability on the connected
device.
Press
ALL REPEAT, FILE REPEAT, REPEAT OFF
ALL RANDOM
• Press
Refer to “Select a file from a
folder/list” on page 9.
.Press
.Press .
.Press .
.Press and hold .
repeatedly.
to select
.
to select
RANDOM OFF
( Not available )
( Not available )
.
( Not available )
.
Internet radio via Bluetooth
Listen to Pandora
models)
You can listen to Pandora on the Android device via
Bluetooth on this unit.
Preparation:
Select [
ON
] for [
PANDORA SRC
(Not applicable for Korean
]. ( 5)
1 Open the Pandora application on your device.
2 Connect your Bluetooth audio player via
Bluetooth connection. (
12)
3 Press repeatedly to select PANDORA.
The source switches and broadcast starts
automatically.
You can operate Pandora in the same way as
Pandora for iPod/iPhone. (
10)
ENGLISH
17
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [
2 Turn the volume knob to select [
knob.
3 Turn the volume knob to select an item (see the following table),
then press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
(or using RC-406)
1 Press AUD to enter [
AUDIO CONTROL
2 Press to select an item, then press .
To return to the previous setting item, press
SUB-W LEVEL–50
MANUAL EQ
BAND1 LEVELLEVEL
BAND2 LEVEL
BAND13 LEVEL
Q FACTOR1.35/ 1.50/ 2.00
PRESET EQNATURAL/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL/ USER
BASS BOOSTLEVEL1/ LEVEL2/ LEVEL3/ LEVEL4/ LEVEL5
to
+10 (0
BASS EXTENDON
to
–9
to +9 (0): The sound elements (frequency level, tone level, Q factor)
are preset into each selection (
Adjusts the level to memorize for each source. (Before making an
adjustment, select the source you want to adjust.)
Selects a preset equalizer suitable to the music genre. (Select [
use the settings made in [
LV5
:Selects your preferred bass boost level.;
FUNCTION
].
AUDIO CONTROL
].
): Adjusts the subwoofer output level.
–9
to +9 (0):(Refer to
:Turns on the extended bass.;
:Adjust the quality factor.
MANUAL EQ
BAND1 LEVEL
].)
], then press the
.
BAND2 LEVEL
to
or
OFF
Default:
below.)
OFF
:Cancels.
BAND13 LEVEL
LV1/ LV2/ LV3/ LV4
:Cancels.
).
USER
LOUDNESSLEVEL1/ LEVEL2
SUBWOOFER SET ON
FADER
BALANCEL15
VOLUME OFFSET–15
SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
XX
SPACE ENHANCE
SND REALIZERLEVEL1/ LEVEL2/ LEVEL3
STAGE EQLOW/ MIDDLE/ HIGH
DRIVE EQON
:
SPEAKER SIZE
] to
X ‘ OVER
/
• : For 2-way crossover: [
selectable only if [
• [
SUB-W LEVEL
frequencies boost to produce a well-balanced sound at a low volume
level.;
:Turns on the subwoofer output.;
(Not applicable if 3-way crossover is selected.)
R15
to
to
to +6 (0):Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
(Not applicable for TUNER source and AUX source.)
ON
:Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression.;
(Not applicable for TUNER source.)
SMALL/ MEDIUM/ LARGE
the sound space.;
sound more realistic.;
position heard from the speakers.;
: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres.;
Depending on the crossover type you have selected
crossover or 3-way crossover setting items will be shown.
By default, 2-way crossover type is selected.
SWITCH PREOUT
] is selectable only if [
or
LV1/ LV2
:Selects your preferred low and high
OFF
:Cancels.
OFF
:Cancels.
F15 (0
):Adjusts the rear and front speaker output balance.
R15 (0
):Adjusts the left and right speaker output balance.
OFF
:Cancels.
or
SML/ MED/ LRG
OFF
:Cancels.
or
LV1/ LV2/ LV3
OFF
:Cancels.
or
LOW/ MID/ HI
SUB-W LEVEL
] is set to [
SUBWOOFER SET
SUB-W
:Virtually makes the
:Virtually adjust the sound
OFF
:Cancels.
OFF
:Cancels.
]/ [
SUBWOOFER SET
]. ( 5)
] is set to [ON].
:Virtually enhances
( 5)
, 2-way
(
19, 20
] is
)
18
Loading...
+ 42 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.