KENWOOD KDC-BT440U, KDC-BT640U User Manual [nl]

KDC-BT640U KDC-BT440U

CD-RECEIVER

INSTRUCTION MANUAL

AUTORADIO CD

MODE D’EMPLOI

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-RECEIVER

GEBRUIKSAANWIJZING

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Information sur l’élimination des anciens équipements électriques et électroniques et piles électriques (applicable dans les pays qui ont adopté des systèmes de collecte sélective)

Les produits et piles électriques sur lesquels le pictogramme (poubelle barrée) est apposé ne peuvent pas être éliminés comme ordures ménagères. Les anciens équipements électriques et électroniques et piles électriques doivent être recyclés sur des sites capables de traiter ces produits et leurs déchets. Contactez vos autorités locales pour connaître le site de recyclage le plus proche. Un recyclage adapté et l’élimination des déchets aideront à conserver les ressources et à nous préserver des leurs effets nocifs sur notre santé et sur l’environnement. Remarque: Le symbole “Pb“ ci-dessous sur des piles électrique indique que cette pile contient du plomb.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informatie over het weggooien van elektrische en elektronische apparatuur en batterijen (particulieren)

Dit symbool geeft aan dat gebruikte elektrische, elektronische producten en batterijen niet bij het normale huishoudelijke afval mogen. Lever deze producten in bij de aangewezen inzamelingspunten, waar ze gratis worden geaccepteerd en op de juiste manier worden verwerkt, teruggewonnen en hergebruikt. Voor inleveradressen zie www.nvmp.nl, www.ictmilieu.nl, www.stibat.nl. Wanneer u dit product op de juiste manier als afval inlevert, spaart u waardevolle hulpbronnen en voorkomt u potentiële negatieve gevolgen voor de volksgezondheid en het milieu, die anders kunnen ontstaan door een onjuiste verwerking van afval. Opgelet: Het teken “Pb” onder het teken van de batterijen geeft aan dat deze batterij lood bevat.

For Israel

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Marquage des produits utilisant un laser

L’étiquette est attachée au châssis/boîtier de l’appareil et indique que l’appareil utilise des rayons laser de classe 1. Cela signifie que l’appareil utilise des rayons laser d’une classe faible. Il n’y a pas de danger de radiation accidentelle hors de l’appareil.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Markering op produkten die laserstralen gebruiken

Dit label is aangebracht op de behuizing/houder en toont dat de component een laserstraal gebruikt die als Klasse 1 is geclassificeerd. Dit betekent dat de laserstraal relatief zwak is en er geen gevaar van straling buiten het toestel is.

SOFTWARE LICENSE AGREEMENT

The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.

The User shall use the Licensed Software by agreeing with the terms of this Software License Agreement. This Agreement shall be deemed completed at the time the User (hereinafter the "User") initially used the Product in which the "Licensed Software" is embedded.

The Licensed Software may include the software which has been licensed to the Licensor directly or indirectly from any third party. In such case, some third parties require the Users to follow their conditions for use separately from this Software License Agreement. Such software shall not be subject to this Agreement, and the Users are urged to read the "Important Notice concerning the Software" to be provided separately below.

Article 1 General Provision

The Licensor shall grant to the User a non-exclusive and non-transferable (other than the exceptional case referred to in Article 3, Paragraph 1) licensed to use the Licensed Software within the country of the User. (the country where the User bought the Product (hereinafter the "Country")

Article 2 License

1. The license granted under this Agreement shall be the right to use the Licensed Software in the Product.

2. The User shall not duplicate, copy, modify, add, translate or otherwise alter, or lease the Licensed Software and any related documents, whether in whole or in part.

3. The use of the Licensed Software shall be limited to personal purpose, and the Licensed Software shall not be distributed, licensed or sub-licensed whether it is for commercial purpose or not.

4. The User shall use the Licensed Software according to the directions described in the operation manual or help file, and is prohibited to use or duplicate any data in a manner violating the Copyright Law or any other laws and regulations by applying whole or a part of the Licensed Software.

Article 3 Conditions for Grant of License

1. When the User transfers the Product, it may also transfer the license to use the Licensed Software embedded in the Product (including any related materials, updates and upgrades) on condition that no original, copies or related materials continue in the possession of the User, and that the User shall cause the transferee to comply with this Software License Agreement.

2. The User shall not carry out reverse engineering, disassembling, decompiling or any other code analysis works in connection with the Licensed Software.

Article 4 Right pertaining to the Licensed Software

Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

Article 5 Indemnification of Licensor

1. Neither the Licensor nor the Original Rightholder shall be liable for any damage incurred by the User or any third party due to the exercise of the license granted to the User under this Agreement, unless otherwise restricted by law.

2. The Licensor will offer no guarantee for the merchantability, convertibility and consistency with certain objective of the Licensed Software.

Article 6 Liability to Third Party

If any dispute has arisen with any third party due to an infringement upon a copyright, patent or any other intellectual property right that was caused by the User's use of the Licensed Software, the User shall settle such dispute at its own cost and hold the Licensor and the Original Rightholder harmless from any inconvenience it may cause.

Article 7 Confidentiality

The User shall keep the confidentiality of such portion of the Licensed Software, related documents thereof or any other information to be granted under this Agreement, as well as the conditions of this Agreement as has not yet entered the public domain, and shall not disclose or divulge the same to any third party without approval of the Licensor.

Article 8 Termination

In case the User falls under any of the events described in the following items, the Licensor may immediately terminate this Agreement or claim that the User compensates for the damage incurred by the Licensor due to such event: (1) when the User violated any provision of this Agreement; or (2) when a petition has been filed against the User for an attachment, provisional attachment,

provisional disposition or any other compulsory execution.

Article 9 Destruction of the Licensed Software

If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed Software, any related documents and copies thereof within two (2) weeks from such date of termination.

Article 10 Protection of Copyright

1. The copyright and all the other intellectual property rights relating to the Licensed Software shall belong to the Licensor and the Original Rightholder, and in no event shall they be under the ownership of the User.

2. The User shall, whenever it uses the Licensed Software, comply with any laws relating to the copyright and other intellectual property rights.

Article 11 Export Restriction

1. It is prohibited to export the Licensed Software and any related documents outside the country of the User (including transmission thereof outside the country of the User via Internet of other communication tools).

2. The User shall understand that the Licensed Software shall be subject to the export restrictions adopted by the country of User and any other countries.

3. The User shall agree that the software will be subject to any and all applicable international and domestic laws (including the export control regulation of the country of User and any other countries, and any restrictions concerning the end-users, the use by end-users and importing countries to be provided by the country of User and any other countries, and any other governmental authorities).

Article 12 Miscellaneous

1. In the event any part of this Agreement is invalidated by operation of law, the residual provisions shall continue in force.

2. Matters not stipulated in this Agreement or any ambiguity or question raised in the construction of this Agreement shall be provided or settled upon good-faith consultation between the Licensor and the User.

3. The Licensor and the User hereby agree that this Agreement is governed by the laws of Japan, and any dispute arising from, and relating to the rights and obligations under, this Agreement shall be submitted to the exclusive jurisdiction of the Tokyo District Court for its first instance.

iii

Important Notice concerning the Software

documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

-CMP

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software.

Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

sha2 AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/

You may obtain a copy of the license at https://opensource.org/licenses/BSD-3-Clause

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

Permission to use, copy, modify, and distribute this software is freely granted, provided that this notice is preserved.

MD4 Message-Digest Algorithm” in all material mentioning or referencing this software or this function.

Copyright (c) 1995, 1996 Carnegie-Mellon University. All rights reserved. Author: Chris G. Demetriou Permission to use, copy, modify and distribute this software and its documentation is hereby granted,

provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation.

CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.

Carnegie Mellon requests users of this software to return to Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU

School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890

any improvements or extensions that they make and grant Carnegie the rights to redistribute these changes. License is also granted to make and use derivative works provided that such works are identified as "derived from the RSA Data Security, Inc. MD4 Message-Digest Algorithm" in all material mentioning or referencing the derived work.

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the suitability of this software for any particular purpose. It is provided "as is" without express or implied warranty of any kind.

You may redistribute unmodified or modified versions of this source code provided that the above copyright notice and this and the following conditions are retained.

This software is provided ``as is'', and comes with no warranties of any kind. I shall in no event be liable for anything that happens to anyone/anything when using this software. These notices must be retained in any copies of any part of this documentation and/or software.

T-Kernel 2.0 This product uses the source code of T-Kernel 2.0 under T-License 2.0 granted by T-Engine Forum (www.tron.org)

You may obtain a copy of the license at https://directory.fsf.org/wiki/License:BSD-4-Clause

Accordo2 Player Apache License Licensed under the Apache License, Version 2.0, January 2004(the "License"); You may obtain a copy of the license at http://www.apache.org/licenses/LICENSE-2.0

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Déclaration de conformité se rapportant à la directive RE 2014/53/EU Déclaration de conformité se rapportant à la directive RoHS 2011/65/EU Fabricant:

JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Représentants dans l’UE:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU Hersteller:

JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Conformiteitsverklaring met betrekking tot de RE-richtlijn van de Europese Unie (2014/53/EU) Conformiteitsverklaring met betrekking tot de RoHS richtlijn van de Europese Unie (2011/65/EU) Fabrikant:

JVCKENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-vertegenwoordiger:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Nederland

vii

English

Hereby, JVCKENWOOD declares that the radio equipment “KDC-BT640U/KDC-BT440U” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio « KDC-BT640U/KDC-BT440U » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “KDC-BT640U/KDC-BT440U” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “KDC-BT640U/KDC-BT440U” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “KDC-BT640U/KDC-BT440U” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “KDC-BT640U/KDC-BT440U” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “KDC-BT640U/KDC-BT440U” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “KDC-BT640U/KDC-BT440U” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “KDC-BT640U/KDC-BT440U” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „KDC-BT640U/KDC-BT440U“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “KDC-BT640U/KDC-BT440U” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “KDC-BT640U/KDC-BT440U” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema » KDC-BT640U/KDC-BT440U « v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „KDC-BT640U/KDC-BT440U“ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “KDC-BT640U/KDC-BT440U” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «KDC-BT640U/KDC-BT440U» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „KDC-BT640U/KDC-BT440U“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „KDC-BT640U/KDC-BT440U” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „KDC-BT640U/KDC-BT440U“ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tarradju “KDC-BT640U/KDC-BT440U” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “KDC-BT640U/KDC-BT440U” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “KDC-BT640U/KDC-BT440U” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “KDC-BT640U/ KDC-BT440U” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “KDC-BT640U/ KDC-BT440U” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «KDC-BT640U/KDC-BT440U» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «KDC-BT640U/ KDC-BT440U» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

viii

Contents

Before Use ................................................................................................. 3

Basics ......................................................................................................... 4

Getting Started ........................................................................................ 5

1 Select the display language and cancel the demonstration

2 Set the clock and date

3 Set the other optional settings

Radio .......................................................................................................... 7

CD/USB/iPod............................................................................................. 9

Spotify ..................................................................................................... 11

AUX........................................................................................................... 13

Using Other Applications .....................................................................13

KENWOOD Remote application

TuneIn Radio/TuneIn Radio Pro

Bluetooth® .............................................................................................. 15

Bluetooth – Connection

Bluetooth – Mobile phone

Bluetooth – Audio

AMAZON ALEXA .................................................................................... 21

Audio Settings ........................................................................................22

Display Settings ..................................................................................... 27

Installation/Connection ....................................................................... 28

References .............................................................................................. 32

Maintenance

More information

Change the display information

Troubleshooting .................................................................................... 34

Specifications ......................................................................................... 37

ENGLISH

Before Use

IMPORTANT

• To ensure proper use, please read through this manual before using this

product. It is especially important that you read and observe Warnings and Cautions in this manual.

• Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe

driving.

CAUTION

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent

accidents.

• Lower the volume before playing digital sources to avoid damaging the

speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no

responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside

the unit to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc

and wait for the moisture to evaporate.

• USB rating is indicated on the main unit. To view, detach the faceplate.

(Page 4)

• Depending on the types of cars, the antenna will automatically extend

when you turn on the unit with the antenna control wire connected (page31). Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

• The displays and faceplates shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or faceplates.

• Operations are explained mainly using buttons on the faceplate of

• English indications are used for the purpose of explanation. You can select the display language from the

•

[XX]

indicates the selected items.

• (PageXX) indicates references are available on the stated page.

[FUNCTION]

menu. (Page6)

This symbol on the product means there are important operating and maintenance instructions in this manual. Be sure to carefully read instructions in this manual.

ENGLISH

Basics

Faceplate

Attach

Volume knob Loading slot

Lights up when Bluetooth connection is established. (Page15)

Detach button Display window*

* Only for illustration purpose.

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly. (Page 33, 34)

ENGLISH

Press B SRC.

• Press and hold to turn off the power.

• Press B SRC repeatedly.

• Press B SRC, then turn the volume knob within 2 seconds.

Detach

How to reset

Reset the unit within 5 seconds after detaching the faceplate.

Getting Started

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[YES]

, see page6), the display shows: “SEL LANGUAGE” “PRESS”

“VOLUME KNOB”

1 Turn the volume knob to select

[SP]

(Spanish) /

[EN]

is selected for the initial setup.

[FR]

(French) /

[EN]

[GE]

* (German), then press the knob.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”. 2 Press the volume knob again.

[YES]

is selected for the initial setup.

3 Press the volume knob again. “DEMO OFF” appears.

* Only for .

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type” on page7.

Set the clock and date

Press the volume knob to enter

1 2 Turn the volume knob to select

[FUNCTION] [CLOCK]

[FACTORY RESET]

(English) /

[RU]

(Russian) /

, then press the knob.

is set to

To adjust the clock

3 Turn the volume knob to select

[CLOCKADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob. Set the time in the order of “Hour” “Minute”. 5 Turn the volume knob to select 6 Turn the volume knob to select

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

the knob.

9 Turn the volume knob to select

[CLOCK FORMAT] [12H]

[24H]

[DATEFORMAT] [DD/MM/YY]

[DATESET]

, then press the knob.

[MM/DD/YY]

, then press

10 Turn the volume knob to make the settings, then press the knob. Set the date in the order of “Day” “Month” “Year” or “Month” “Day”

“Year”.

11 Press and hold to exit.

To return to the previous setting item, press

Set the other optional settings

You can only set the following items while the unit is in STANDBY source.

1 Press B SRC repeatedly to enter STANDBY. 2 Press the volume knob to enter

[FUNCTION]

3 Turn the volume knob to select an item (page 6), then press the

knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press

ENGLISH

Getting Started

[AUDIO CONTROL]

[SWITCH PREOUT]

[DISPLAY]

[EASY MENU]

[TUNER SETTING]

[PRESET TYPE]

[SYSTEM]

[KEY BEEP]

[SOURCE SELECT]

[SPOTIFY SRC]

[BT AUDIO SRC]

[BUILT-IN AUX]

(Applicable only if [X’OVER] is set to [2WAY].) (Page 7) [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are

connected to the line out terminals on the rear (through an external amplifier). (Page 30)

(For ) When entering [FUNCTION]...

[ON]: [ZONE 1] illumination changes to white color. ; [OFF]: [ZONE 1] illumination remains as [COLOR SELECT] color.

(Page 27)

• [ZONE 2] illumination changes to light blue color when you enter

• Refer to the illustration on page 27 for zone identification.

[NORMAL]: Memorizes one station for each preset button in each band (FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset button, regardless of the selected band.

(Applicable only if [X’OVER] is set to [2WAY].) (Page 7)

[ON]: Activates the keypress tone. ; [OFF]: Deactivates.

[ON]: Enables SPOTIFY/SPOTIFY BT in source selection. ; [OFF]: Disables. (Page 11)

[ON]: Enables BT AUDIO in source selection. ; [OFF]: Disables. (Page 20)

[ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 13)

[FUNCTION], irregardless of the [EASY MENU] setting.

Default: [XX]

[P-OFF WAIT] Applicable only when the demonstration mode is turned off.

[CD READ]

[F/W UPDATE]

[UPDATE SYSTEM]

[F/W UP xxxx]

[FACTORY RESET]

[ENGLISH]

[РУССКИЙ]

[ESPANOL]

[FRANCAIS]

[DEUTSCH]*

* Only for

Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ; [– – –]: Cancels

[1]: Automatically distinguishes between audio file disc and music CD. ; [2]: Forces to play as a music CD. No sound can be heard if an audio file disc

is played.

[YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

[YES]: Resets the settings to default (except the stored station). ; [NO]: Cancels.

Select the display language for [FUNCTION] menu and music information if applicable. By default, [ENGLISH] is selected.

ENGLISH

Getting Started

Change the crossover type

Press B SRC repeatedly to enter STANDBY.

1 2 Press and hold number buttons 4 and 5 to enter crossover select. The current crossover type appears. 3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob. The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings, see page 24.

Radio

• “ST” indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.

• The unit switches to FM alarm automatically when receiving an alarm signal from FM broadcast.

CAUTION

Select a crossover type according to how the speakers are connected. (Page30, 31)

If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

Search for a station

Press B SRC repeatedly to select RADIO.

1 2 Press BAND repeatedly to select FM1/FM2/FM3/MW/LW. 3 Press S / T to search for a station.

You can store up to 18 stations for FM and 6 stations for MW/LW.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station:

Press one of the number buttons (1 to 6).

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (page 8), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

ENGLISH

Radio

[TUNER SETTING]

[SEEK MODE]

[LOCAL SEEK]

[AUTO MEMORY]

[MONO SET]

[NEWS SET]

[REGIONAL]

[AF SET]

[TI]

[PTY SEARCH]

Default: [XX]

Selects the searching method for S / T buttons when pressed. [AUTO1]: Automatically search for a station. ; [AUTO2]: Search for a preset station. ; [MANUAL]: Manually search for a station.

[ON]: Searches only stations with good reception. ; [OFF]: Cancels.

• Settings made are applicable only to the selected source/station. Once you change the source/station, you need to make the settings again.

[YES]: Automatically starts memorizing 6 stations with good reception. ; [NO]: Cancels.

• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 6)

[ON]: Improves the FM reception, but the stereo effect will be lost. ; [OFF]: Cancels.

[ON]: The unit will temporarily switch to News Programme if available. ; [OFF]: Cancels.

[ON]: Switches to another station only in the specific region using the “AF” control. ; [OFF]: Cancels.

[ON]: Automatically searches for another station broadcasting the same

program in the same Radio Data System network with better reception when the current reception is poor. ; [OFF]: Cancels.

[ON]: Allows the unit to temporarily switch to Traffic Information if available (“TI” indicator lights up) while listening to all sources except in MW/LW. ; [OFF]: Cancels.

Turn the volume knob to select the available Program Type (see the

following “Available Program Type for [PTY SEARCH]”), then press the knob.

Turn the volume knob to select the PTY language ([ENGLISH]/

[FRENCH]/[GERMAN]), then press the knob.

Press S / T to start searching.

[CLOCK]

[TIME SYNC]

•

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[TI]/[PTY SEARCH]

selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

Available Program Type for

[SPEECH]

[MUSIC]

[POPM]

(music), (music),

The unit will search for the Program Type categorized under

[MUSIC]

if selected.

[ON]: Synchronizes the unit’s time to the Radio Data System station time. ; [OFF]: Cancels.

[NEWS], [AFFAIRS], [INFO]

[CULTURE], [SCIENCE], [VARIED], [WEATHER], [FINANCE], [CHILDREN] [SOCIAL], [RELIGION], [PHONEIN], [TRAVEL], [LEISURE], [DOCUMENT]

(music),

[PTY SEARCH]

(information),

[ROCKM] [CLASSICS], [OTHERM] [OLDIES], [FOLKM]

(music),

(music)

[SPORT], [EDUCATE], [DRAMA]

[EASYM]

(music),

[JAZZ], [COUNTRY], [NATIONM]

[LIGHTM]

[SPEECH]

ENGLISH

CD/USB/iPod

Insert a disc

Eject disc

Label side

The source changes to CD automatically and playback starts.

Connect a USB device

USB input terminal

The source changes to USB automatically and playback starts.

Connect an iPod/iPhone

USB input terminal

The source changes to iPod USB automatically and playback starts.

• You can also connect iPod/iPhone via Bluetooth. (Page15)

*1 Do not leave the cable inside the car when not in use. *2 KCA-iP103: Lightning type

CA-U1EX (max.: 500 mA)

(optional accessory)*1

(for )

KCA-iP103 (optional accessory)*2 or accessory of the iPod/iPhone*1

USB device

iPod/ iPhone

Selectable source:

To On the faceplate

Play back/pause

Reverse/Fast-forward

Select a track/file

Select a folder*1 Press 2

Repeat play*2 Press 4

Random play*2 Press 3

*1 For CD: Only for MP3/WMA/AAC files. This does not work for iPod. *2 For iPod: Applicable only when [MODE OFF] is selected.

: CD/USB/iPod USB or iPod BT

: CD/USB

Press 6 IW.

Press and hold S / T.

Press S / T.

/ 1 .

repeatedly.

[TRACK REPEAT]/[ALL REPEAT] [FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT]

WMA/AAC/WAV/FLAC file

[REPEAT ONE]/[REPEAT ALL]/[REPEAT OFF]

repeatedly.

[DISCRANDOM]/[RANDOM OFF] [FOLDERRANDOM]/[RANDOM OFF]

AAC/WAV/FLAC file

[SHUFFLE ON]/[SHUFFLE OFF]

Press and hold 3

: Audio CD

: iPod

to select

: Audio CD

: MP3/WMA/

[ALL RANDOM]

ENGLISH

: MP3/

: iPod

.*1

CD/USB/iPod

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drive device.

You can also select the music drive from the

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select The next drive (

playback starts.

[DRIVE 1]

[DRIVE 4]

[FUNCTION]

menu.

[FUNCTION]

[USB]

, then press the knob.

[MUSIC DRIVE] [DRIVE CHANGE]

) is selected automatically and

, then press the knob.

5 Repeat step 1 to step 4 to select the following drives. 6 Press and hold to exit.

To return to the previous setting item, press

Select control mode

While in iPodUSB source (or iPodBT source), press 5 repeatedly.

[MODE ON]

: Control iPod/iPhone using the iPod/iPhone itself. However, you

can still perform play/pause, file skip, fast-forward or fast-reverse

[MODE OFF]

from this unit.

: Control iPod/iPhone from this unit.

Select a file to play

From a folder or list

• For iPod, applicable only when

[MODE OFF]

is selected.

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob. Selected file starts playing.

Quick search

If you have many files, you can search through them quickly.

(applicable only for CD source and USB source)

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob quickly to browse through the list quickly. 4 Turn the volume knob to select a file, then press the knob. Selected file starts playing.

Skip search

If you have many files in the selected list, you can perform the following to search for a file by skipping through the list at a rate selected in (Page 11)

• For iPod, applicable only when

(applicable only for iPod USB source and iPod BT source)

[MODE OFF]

is selected.

[SKIP SEARCH]

1 Press . 2 Turn the volume knob to select a list, then press the knob. 3 Press S / T to search at a preset skip search ratio.

• Pressing and holding S / T searches at a 10% ratio irregardless of

the

[SKIP SEARCH]

settings.

4 Turn the volume knob to select a file, then press the knob. Selected file starts playing.

ENGLISH

CD/USB/iPod Spotify

[SKIP SEARCH] setting

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select

[FUNCTION]

[USB]

, then press the knob.

[SKIP SEARCH]

, then press the knob.

4 Turn the volume knob to select the skip search ratio, then press the

knob.

[0.5%]

(default)/

[1%]/[5%]/[10%]

The skip search ratio is shown as a percentage of the total files. 5 Press and hold to exit.

Alphabet search

You can search for a file according to the first character.

• For iPod, applicable only when

(applicable only for iPod USB source and iPod BT source)

[MODE OFF]

is selected. (Page 10)

1 Press . 2 Turn the volume knob to select a list, then press the knob. 3 Turn the volume knob quickly to enter character search. 4 Turn the volume knob to select the character.

• Select “

5 Press S / T to move to the entry position.

” to search for a character other than A to Z, 0 to 9.

• You can enter up to 3 characters.

6 Press the volume knob to start searching. 7 Turn the volume knob to select a file, then press the knob. Selected file starts playing.

• To return to the root folder/first file/top menu, press 5. (Not applicable for BT AUDIO source.)

• To return to the previous setting item, press

• To cancel, press and hold

You can listen to Spotify on the following devices via USB input terminal (see the following) or via Bluetooth (page 15).

or Android device (via Bluetooth)

Preparation:

• Install the latest version of the Spotify application on your device (iPhone/ iPod touch or Android device), then create an account and log in to Spotify.

• Select

[ON]

Start listening

Start up the Spotify application on your device.

1 2 Connect your device to the USB input terminal. :

USB input terminal

You can also connect the iPhone/iPod touch or Android device via

Bluetooth. (Page 15)

• Make sure the USB input terminal is not connected to any device when

you connect via Bluetooth.

3 Press B SRC repeatedly to select SPOTIFY (for iPhone/iPod touch) or

SPOTIFY BT (for Android device).

Broadcast starts automatically.

: iPhone/iPod touch (via Bluetooth or via USB input terminal)

: Android device (via Bluetooth)

for

[SPOTIFY SRC]

[SOURCE SELECT]

KCA-iP103 (optional accessory)*1 or

accessory of the iPhone/iPod touch*2

. (Page6)

iPhone/ iPod touch

*1, *2: See page 12.

ENGLISH

Spotify

To On the faceplate

Play back/pause

Skip a track

Select thumbs up or thumbs down *4

Start radio Press and hold 5.

Repeat play*5 Press 4

Random play*5 Press 3

*1 KCA-iP103: Lightning type *2 Do not leave the cable inside the car when not in use. *3 Available for premium account users only. *4 This feature is available for tracks in Radio only. If thumbs down is selected, the current track is

skipped.

*5 Available for tracks in Playlists only.

Press 6 IW.

Press S*3 / T.

/ 1 .

Press 2

repeatedly.

[REPEAT ALL], [REPEAT ONE]

repeatedly *3.

[SHUFFLE ON], [SHUFFLEOFF]

*3,

[REPEATOFF]

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

Press .

1 2 Turn the volume knob to select a list type, then press the knob. The list types displayed differ depending on the information sent from

Spotify.

3 Turn the volume knob to select the desired song or station. 4 Press the volume knob to confirm. You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

ENGLISH

AUX

You can listen to music from a portable audio player via the auxiliary input jack.

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press B SRC repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the name of the external device

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Turn the volume knob to select an item, then press the knob.

[AUX]

(default)/

5 Press and hold to exit.

To return to the previous setting item, press

[SOURCESELECT]

[DVD]/[PORTABLE]/[GAME]/[VIDEO]/[TV]

. (Page6)

[FUNCTION]

[SYSTEM]

, then press the knob.

[AUX NAME SET]

Portable audio player

, then press the knob.

Using Other Applications

KENWOOD Remote application

You can control the KENWOOD car receiver using KENWOOD Remote application from the following devices.

or Android device (via Bluetooth)

• For more information, visit <http://www.kenwood.com/cs/ce/>.

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting.

Start using KENWOOD Remote application

Start up the KENWOOD Remote application on your device.

1 2 Connect your device.

• For Android device:

Pair the Android device with this unit via Bluetooth. (Page 15)

• For iPhone/iPod touch:

Connect iPhone/iPod touch to the USB input terminal. (Page 9) (or) Pair the iPhone/iPod touch with this unit via Bluetooth. (Page 15) (Make sure the USB input terminal is not connected to any device.) 3 Select the device to use from the See “Settings to use KENWOOD Remote application” on page 14. By default,

touch, select

• For application is connected.

: iPhone/iPod touch (via Bluetooth or via USB input terminal)

: Android device (via Bluetooth)

[FUNCTION]

[ANDROID]

is selected. For to use iPhone/iPod

[YES]

for

[IOS]

, “R.APP” indicator lights up when KENWOOD Remote

menu.

ENGLISH

Using Other Applications

Settings to use KENWOOD Remote application

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated. 4 Press and hold to exit.

To return to the previous setting item, press

[REMOTE APP]

[SELECT]

[IOS]

[ANDROID]

[ANDROID LIST] Selects the Android device to use from the list.

(For Selects the device ([IOS] or [ANDROID]) to use the application.

[YES]: Selects iPhone/iPod touch to use the application via Bluetooth or connected via USB input terminal. ; [NO]: Cancels. If [IOS] is selected, select iPod BT source (or iPod USB source if your iPhone/ iPod touch is connected via USB input terminal) to activate the application.

• The connectivity of the application will be interrupted or disconnected if: – You change from iPod BT source to any playback source connected via

the USB input terminal.

– You change from iPod USB source to iPod BT source.

[YES]: Selects Android device to use the application via Bluetooth. ; [NO]: Cancels.

• For

to [YES].

)

: Displayed only when [ANDROID] of [SELECT] is set

Default: [XX]

[STATUS] Shows the status of the selected device.

Tuneln Radio/Tuneln Radio Pro

While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPhone/ iPod touch to the USB input terminal of the unit so that the unit will output the sound from these applications.

[IOS CONNECTED]: You are able to use the application using the iPhone/ iPod touch connected via Bluetooth or USB input terminal.

[IOS NOT CONNECTED]: No iOS device is connected to use the application. [ANDROID CONNECTED]: You are able to use the application using the

Android device connected via Bluetooth. [ANDROID NOT CONNECTED]: No Android device is connected to use the application.

(for )

ENGLISH

Bluetooth®

• Depending on the Bluetooth version, operating system and the firmware version of your mobile phone, Bluetooth features may not work with this unit.

• Be sure to turn on the Bluetooth function of the device to make the following operations.

• Signal conditions vary depending on the surroundings.

Bluetooth — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone

Microphone input jack

Adjust the

microphone angle

(supplied)

Secure using cord clamps (not supplied) if necessary.

Pair and connect a Bluetooth device for the first time

Press B SRC to turn on the unit.

1 2 Search and select the name of your receiver (“KDC-BT640U”/

“KDC-BT440U”) on the Bluetooth device.

“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME

KNOB” appears on the display.

• For some Bluetooth devices, you may need to enter the Personal

Identification Number (PIN) code immediately after searching.

3 Press the volume knob to start pairing. “PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically.

• “

the connected device.

• up.

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device, see

[DEVICE DELETE]

• A maximum of two Bluetooth phones and one Bluetooth audio device can be connected at any time. To connect or disconnect the registered device, see

[PHONE SELECT]

However, while in BT AUDIO source, you can connect to five Bluetooth

audio devices and switch between these five devices. (Page20)

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

: “BT1” and/or “BT2” indicator on the faceplate lights up.

” indicator lights up to show the strength of the battery and signal of

: “BT1” and/or “BT2” indicator on the display window lights

on page19.

[AUDIO SELECT]

[BT MODE]

. (Page 19)

ENGLISH

Bluetooth®

Auto Pairing

When you connect iPhone/iPod touch to the USB input terminal, pairing request (via Bluetooth) is automatically activated if

[ON]

. (Page 19)

Press the volume knob to pair once you have confirmed the device name.

Bluetooth — Mobile phone

Receive a call

When there is an incoming call:

•

• The unit answers the call automatically if time. (Page17)

During a call:

•

[DISPLAY]

• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.

(for )

[ZONE 2]

[ZONE 1]

(page27) and

[AUTO PAIRING]

illuminates in green color and flashes.

illuminates according to the settings made for

[ZONE 2]

illuminates in green color.

[AUTO ANSWER]

is set to

is set to a selected

The following operations may differ or be unavailable depending on the connected phone.

To On the faceplate

First incoming call...

Answer a call

Reject a call

End a call

While talking on the first incoming call...

Answer another incoming call and hold the current call

Reject another incoming call

While having two active calls...

End current call and activate held call

Swap between the current call and held call

Adjust the phone volume*1

[00]

[35]

(Default:

[15]

)

Switch between hands-free and private talk modes*2

*1 This adjustment will not affect the volume of the other sources. *2 Operations may vary according to the connected Bluetooth device.

Press

or the volume knob or one of

the number buttons (1 to 6).

Press

Turn the volume knob during a call.

Press 6 IW during a call.

ENGLISH

Bluetooth®

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[MIC GAIN] [LEVEL –10] to [LEVEL +10] ([LEVEL –4]): The sensitivity of the

[NR LEVEL]

[ECHO CANCEL]

microphone increases as the number increases.

[LEVEL –5] to [LEVEL +5] ([LEVEL 0]): Adjust the noise reduction level until the least noise is being heard during a phone conversation.

[LEVEL –5] to [LEVEL +5] ([LEVEL 0]): Adjust the echo cancellation delay time until the least echo is being heard during a phone conversation.

Default: [XX]

Make the setting for answering a call

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select 3 Turn the volume knob to select

[SETTINGS]

, then press the knob.

[AUTO ANSWER]

, then press the knob.

4 Turn the volume knob to select the time (in seconds) for the unit to

answer the call automatically, then press the knob.

[01]

[30]

, or select

[OFF]

to cancels. (Default:

[OFF]

)

5 Press and hold to exit.

To return to the previous setting item, press

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode. “(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch to the

other phone.

“(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[CALL HISTORY] (Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “I” indicates call received, “O“ indicates call made, “M” indicates call missed.

• Press DISP to change the display category (NUMBER or NAME).

• “NO DATA” appears if there is no recorded call history or call number.

Press the volume knob to call.

ENGLISH

Bluetooth®

[PHONE BOOK] (Applicable only if the phone supports PBAP.)

[NUMBER DIAL]

[VOICE] Speak the name of the contact you want to call or the voice command to

[LOW]/[MID]/[FULL]: Shows the strength of the battery.*

[NO SIGNAL]/[LOW]/[MID]/[MAX]: Shows the strength of the current received signal.*

* Functionality depends on the type of the phone used.

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

• To select the desired first letter, turn the volume knob or press

/ T, then press the knob.

Select “1” to search with numbers and select “

Turn the volume knob to select a name, then press the knob.

Turn the volume knob to select a phone number, then press the knob to

call.

• For using phonebook with this unit, make sure to allow access to or transfer from your smartphone. Depending on the connected phone, the process may be different.

• Contacts are categorized as: HM (home), OF (office), MO (mobile), OT (other), GE (general)

• This unit can display only non-accent letters. (Accent letters such as “Ú” are shown as “U”.)

Turn the volume knob to select a number (0 to 9) or character ( , #, +).

Press S / T to move the entry position.

Repeat step 1 and step 2 until you finish entering the phone number.

Press the volume knob to call.

control the phone functions. (See also the following “Make a call using voice recognition”.)

), press 2 /

” to search with symbols.

Make a call using voice recognition

Press and hold to activate the voice recognition of the connected

phone.

2 Speak the name of the contact you want to call or the voice command

to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select

[NUMBERDIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

3 Turn the volume knob to select a contact or enter a phone number. If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6). “STORED” appears when the contact is stored.

To erase a contact from the preset memory, select store a blank number in step 3 and proceed to step 4.

[NUMBER DIAL]

in step 2,

Make a call to a registered number

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call. “NO MEMORY” appears if there is no contact stored.

ENGLISH

Bluetooth®

Bluetooth mode settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press

[BT MODE]

[PHONE SELECT]

[AUDIO SELECT]

[DEVICE DELETE]

[PIN CODE EDIT] (0000)

[RECONNECT]

[AUTO PAIRING]

Selects the phone or audio device to connect or disconnect. “

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

• You can connect a maximum of two Bluetooth phones and one Bluetooth audio device at a time.

Turn the volume knob to select a device to delete, then press the

knob.

Turn the volume knob to select [YES] or [NO], then press the knob.

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S / T to move the entry position.

Repeat step 1 and step 2 until you finish entering the PIN code.

Press the volume knob to confirm.

[ON]: The unit is automatically reconnect when the last connected Bluetooth device is within the connectable range. ; [OFF]: Cancels.

[ON]: The unit is automatically paired with the supported Bluetooth device (iPhone/iPod touch) when it is connected through USB input terminal. Depending on the operating system of the connected device, this function may not work. ; [OFF]: Cancels.

Default: [XX]

[INITIALIZE] [YES]: Initializes all the Bluetooth settings (including stored pairing,

phonebook, and etc.). ; [NO]: Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold . “PLEASE PAIR YOUR PHONE PIN 0000” appears on the display. 2 Search and select the name of your receiver (“KDC-BT640U”/

“KDC-BT440U”) on the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing. “TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP) compatibility PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold B SRC to turn off the unit.

ENGLISH

Bluetooth®

Bluetooth — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Listen to the audio player via Bluetooth

Press B SRC repeatedly to select BTAUDIO.

• For : Pressing enters BT AUDIO directly. 2 Operate the audio player via Bluetooth to start playback.

To On the faceplate

Play back/pause

Select group or folder Press 2

Reverse skip/Forward skip

Reverse/Fast-forward

Repeat play Press 4

Random play Press and hold 3 to select

Press 6 IW.

/ 1 .

Press S / T.

Press and hold S / T.

repeatedly.

[ALLREPEAT], [FILEREPEAT], [GROUP REPEAT] [REPEATOFF]

[GROUP RANDOM]

•

Press 3 to select

[ALLRANDOM]

[RANDOMOFF].

To On the faceplate

Select a file from a folder/list Refer to “Select a file to play” on page 10.

Switch between connected Bluetooth audio devices

* Depending on the connected device, some devices may not support this feature.

Operations and display indications may differ according to their availability on the connected device.

Listen to iPod/iPhone via Bluetooth

You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.

Press B SRC repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal. (Page9)

• If you plug in an iPod/iPhone to the USB input terminal while listening to iPodBT source, the source automatically changes to iPodUSB source. Press B SRC to select iPodBT source if the device is still connected via Bluetooth.

Press 5. (Pressing the “Play” key on the connected device itself also causes switching of sound output from the device.)

(for )

ENGLISH

AMAZON ALEXA

Alexa is the cloud-based voice service developed by Amazon. You can ask Alexa to play music, get weather reports, traffic information, control smart home devices, shop on Amazon, search the internet, set reminders and more.

Preparation:

• Create an account at <www.amazon.com>.

• Install the latest version of the Alexa mobile application on your device (iPhone/iPod touch or Android device), then log in to the application.

• Be sure to enable the internet connection on your smartphone.

(for )

Setup for the first time

For Android device

1 Pair your device with this unit via Bluetooth. (Page 15) 2 Start up the Alexa mobile application on your device. 3 Pair this unit to Alexa mobile application. Perform Option A or Option B.

For iPhone/iPod touch

1 Pair your device with this unit via Bluetooth. (Page 15) 2 Start up the Alexa mobile application on your device. 3 Press on the unit to enter ALEXA source.

• You may also press B SRC repeatedly to select iPod BT source.

4 Pair this unit to Alexa mobile application. Perform Option A or Option B.

Option A: Direct Link

Access the following URL or scan the QR code with your smartphone:

3 Tap “Add Device”. 4 Tap “Automotive Accessory” or “Headphones” from the list of device

types.

5 Tap the name of your receiver (“KDC-BT640U”) and follow the

instructions.

Once the setup process is completed, the Alexa mobile application will establish a connection with this unit.

• The Alexa connection can be disconnected if: – A2DP profile is disconnected – Bluetooth is disconnected – This unit is turned off – Any other conditions depending on the connected device. To establish Alexa connection again, reconnect the A2DP profile.

• Alexa connection cannot be established again if you: – Reinstall Alexa mobile application – Delete the paired device and perform pairing again (for Android device) To establish Alexa connection again, perform the setup process again.

• You can check the Alexa connection from the Alexa mobile application. If the name of this unit appears on the screen of “ALL DEVICES”, you do not need to perform setup process again.

https://www.kenwood.com/car/alexa

Option B: Manual Pairing

1 Start up the Alexa mobile application and go to the “Devices” tab. 2 Tap the “ + ” icon at the top right corner.

Basic operations

Once Alexa connection is established...

1 Press on the unit to speak with Alexa. The display shows: “ALEXA” “LISTENING...”.

ENGLISH

AMAZON ALEXA

(for )

2 Communicate with Alexa via the connected microphone. (Page15) “THINKING...” appears when Alexa is processing your voice input. “SPEAKING...” appears while Alexa is responding to your voice input. “ALEXA” or display information such as playing time, song title, etc.

appears while Alexa is in idle state.

• To return to the previous source before ALEXA, press B SRC.

• To activate Alexa, press .

• To cancel current listening state, press

• To cancel current thinking/speaking states and go to listening state, press

• Only one Alexa connection can be connected at one time.

• “DISCONNECTED” appears if the unit is disconnected from Alexa mobile application or the Bluetooth connection is disconnected.

Start listening

While in Alexa idle state...

1 Press on the unit to activate Alexa.

The display shows: “LISTENING...”.

2 Communicate with Alexa via the connected microphone. (Page15) 3 During music playback in ALEXA source, you can perform the

following operations:

To On the faceplate

Play back/pause

Reverse skip/Forward skip

Press 6 IW.

Press S / T.

Audio Settings

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press

[AUDIO CONTROL]

[SUB-W LEVEL]

[EASYEQ]

[LEVEL –50] to [LEVEL +10] ([LEVEL 0]): Adjusts the subwoofer output

level.

Adjusts your own sound settings.

• The settings are stored to [USER] in [PRESET EQ].

• The settings made may affect the current settings of [MANUAL EQ].

[SW]: [LEVEL –50] to [LEVEL +10] (Default: [LEVEL 0] [BASS]: [LEVEL –9] to [LEVEL +9] [LEVEL 0] [MID]: [LEVEL –9] to [LEVEL +9] [LEVEL 0] [TRE]: [LEVEL –9] to [LEVEL +9] [LEVEL 0])

[FUNCTION]

Default: [XX]

During music playback, press can now start to communicate with Alexa.

ENGLISH

to pause the music and activate Alexa. You

+ 134 hidden pages