Kenwood KDC-BT32U User Manual

Check the latest edition

KDC-BT42U KDC-BT32U

CD-RECEIVER

INSTRUCTION MANUAL

Before reading this manual, click the button below to check the latest edition and the modified pages. http://manual.kenwood.com/edition/im347/

Safety 2

Maintenance

Preparation 3

How to attach/detach the faceplate How to reset your unit Remote controller

Basic Operations 4

Getting Started 6

Canceling the display demonstration Setting the demonstration mode Adjusting the clock Initial settings before operations

Listening to the Radio 8

Adjust [SETTINGS] mode settings

Listening to the other external components 9

Listening to a Disc/ USB device/ iPod

Start playing a disc Start playing a USB device or iPod Removing the USB device or iPod Selecting Repeat Play Selecting Random Play All Random Play Selecting a folder/track/file Alphabet Search for iPod Selecting App & iPod Control Mode Adjust [SETTINGS] mode settings

Getting Started of Bluetooth 14

Registering your Bluetooth device with this

unit (Pairing)

Registering from Bluetooth devices (Pairing)

Operation of Hands-Free Phoning 16

Making a Call Make a Voice Dialing Call Receiving a Call During a Call Switching between Two Connected Cell-

phones Clearing the disconnection message Downloading the Phone Book

Listening to a Bluetooth Audio 19

Selecting Repeat Play Selecting Random Play

Bluetooth Setup 20

Selecting the Bluetooth Device Bluetooth Device Registration Test Bluetooth Setup

Function settings 22

Using the remote controller (KCA-RC405) 24

Remote sensor Changing the battery of the remote control

unit Operation of Hands-Free Phoning Direct Access Tuning of “TUNER” source Direct Music Search of “USB” source

Installation/connection 26

Troubleshooting 31

Specifications 33

Safety Preparation

¤WARNING

Stop the car before operating the unit.

Important to know...



To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.



Caution: Adjust the volume so that you can hear the sound outside the car. Driving with the volume adjusted to a too high level may cause an accident.



Condensation: When the car is airconditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.



The illustrations in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.



If you experience problems during installation, consult your Kenwood dealer.



When you purchase external components, check with your Kenwood dealer to make sure that they work with your model and in your area.

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit. Cleaning the connector: The unit may not function properly if the connector between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector.

Connector (on the reverse side of the faceplate)

How to attach/detach the faceplate



Do not expose the faceplate to direct sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.



Keep the faceplate in its casing while detached.



The faceplate is a precision component of the unit and can be damaged by shocks or jolts.



To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.

How to reset your unit

If this unit fails to operate properly, press the reset

button. The unit returns to the

factory settings when the reset button is pressed.

Reset button

Remote controller

KD C-BT42U can also be remotely controlled with an optionally purchased remote controller.

CONTENTS



The “AAC” logo is a trademark of Dolby Laboratories.



The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners.



“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.



iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.



“Adobe Reader” is a trademark of Adobe Systems Incorporated.

2 English English 3

Basic Operations

iPod

Display window

K D C-B T42U K D C-B T 32 U

PAR

VOICE

Volume knob

Detaches the faceplate

The following indicator lights up when...

ST: A stereo broadcast is received. RDS: Radio Data System service is available. TI: Traffic Information function is turned on. IN: A disc is in the unit. EQ: [PRESET EQ] is set to an EQ mode other

than [NATURAL]. (page 22)

B.BOOST: [BASS BOOST] is set to [LV1],

[LV2] or [LV 3]. (page 22)

: Indicates that the Music Search mode is

selected now.

BT: Bluetooth cell-phone connection status.

Loading slot

Ejects the disc

iPod

USB terminal

Auxiliary input jack

Slide open the cover

The illustration and button names used for explanation in this manual are of KD C-BT42U (unless mentioned otherwise). Refer to the table below for the difference:

K D C-B T42U

iPod

When you press or hold the following button(s)...

Main unit General operation



Tur ns on .



Turns off if pressed and held.



SRC

Selects the available sources (TUNER, BT AUDIO, USB or iPod, CD, AUX, STANDBY), if the power is turned on.

• Ifthesourceisready,playbackalsostarts.

• “iPod”and“CD”areselectableonlywhenaniPodisconnectedoradiscisloaded.

Volume knob

(turn)

Volume knob

(press)



Adjusts the volume level.



Selects items.



Confirms selection.



Enters [FUNCTION] settings.



Start voice recognize of cell-phone if pressed and held.



Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW when “TUNER” is selected as the source.



Enters Music Search mode.

1 (–)/ 2 (+)

6 (38)

4 / ¢

SCRL DISP

Selects the previous/ next folder. Pauses/resumes playback of a disc/ USB device/ iPod/ Bluetooth Audio.



Searches for radio station.



Selects track/file.



Fast-forwards/fast-backwards tracks/files if pressed and held.



Changes the display information.



Scrolls the display information if pressed and held.



Enters clock adjustment mode directly (page 6) if pressed and held while in clock display screen.



Enters Bluetooth mode. (p age 16)



Press to answer an incoming call.



Enters Bluetooth pairing mode if pressed and held. (pag e 14)



Returns to the previous item.



Exit from setting mode.

• Pressandhold onthemainunitwillalsoexitfromthesettingmode.

CONTENTS

K D C-B T 32 U

4 English English 5

Getting Started

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows:

[CANCEL DEMO] \ [PRESS] \ [VOLUME KNOB]

1 Press the volume knob.

[YES] is selected as the initial setup.

2 Press the volume knob again to confirm.

[DEMO OFF] appears.



If no operation is done for about 15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

1 Press the volume knob to enter

[FUNCTION].

2 Turn the volume knob to select [DEMO

MODE], then press to enter.

3 Turn the volume knob to select [ON] or

[OFF].

If [ON] is selected, display demonstration starts if no operation is done for about 20 seconds.

4 Hold to finish the procedure.

Adjusting the clock

1 Press the volume knob to enter

[FUNCTION] mode.

2 Turn the volume knob to select

[SETTINGS], then press to enter.

3 Turn the volume knob to select [CLOCK],

then press to enter.

4 Turn the volume knob to select [CLOCK

ADJUST/ CLOCK ADJ], then press to

enter.

Clock hour flashes on the display.

5 Turn the volume knob to adjust the hour,

then press to enter minute adjustment.

Clock minutes flashes on the display.

6 Turn the volume knob to adjust the

minute, then press to confirm.

Press 4 / ¢ to move between the hour and minute adjustment.

7 Hold to finish the procedure.

CONTENTS

Initial settings before operations

1 Press SRC to enter [STANDBY] mode. 2 Press the volume knob to enter [FUNCTION] mode. 3 Turn the volume knob to select [INITIAL SET], then press to enter. 4 Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

5 Hold to finish the procedure.

Item Selectable setting (Preset:*)

PRESET TYPE NORMAL/ NORM *: Memorizes o ne station for each p reset button in e ach band (FM1/ FM2/ FM3/ MW/ LW). ;

MIX: Memorize s one station for eac h preset butto n regardless of the sel ected band (FM1/ FM2/ FM3/ MW/ LW). KEY BEEP ON */ OFF: Activates/deactivates the keypress tone. RUSSIAN SET ON: Folde r name, file name, song ti tle, artist name, alb um name are displayed in Rus sian (if applicable). ;

OFF *: Cancels. P-O FF WAIT Sets the d uration when the uni t will automatically tur ns off (while in sta ndby mode) to save the bat tery.

––– : Cancels ; 20M *: 20 minut es ; 40M: 40 minutes ; 6 0M: 60 minutes BUILT-IN AUX/ BUILTIN AUX CD READ 1 *: Automatic ally distinguishe s between audio f ile disc and music CD. ;

SWITCH PREOUT/ SWITCH PRE SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects th e speaker size for optimum p erformance. F/W UP xx. xx YES: Star ts upgrading the f irmware. ; NO *: Cancels (upgrading is not activated).

ON *: Enable s “AUX” in source sele ction. Sound of th e connected ex ternal component is pr oduced through the

car speaker s. ; OFF: Disables “AUX” in source selection.

2: Forces to play as a m usic CD. No sound can be heard i f an audio file disc is playe d.

REAR */ SUB-W: Selec ts whether rear sp eakers or a subwoofer are c onnected to the line o ut terminals on the

rear of the unit (t hrough an externa l amplifier).

For detail s on how to update the fir mware, see: www.kenwoo d.com/cs/ce/

6 English English 7

Listening to the Radio

PAR

VOICE



Press and hold to memorize the current station.



Press briefly to recall memorized station.

1 Press SRC to select “TUNER”. 2 Press repeatedly to select a band (FM1, FM2, FM3, MW/LW). 3 Press 4 / ¢ to search for a station.



The tuning mode can be changed. Refer to <SEEK MODE> (page 8).

CONTENTS

Item Selectable setting (Preset:*)

AUTO TP SEEK/ ATP S EEK



[TI/NEW S SET/ AF SET/ REGIONAL/ AUTO TP SEEK/ ATP SEEK ] is selectable o nly when the source is “FM”. If other play back source

ON *: Automat ically searches for a s tation with bet ter reception when t he traffic inf ormation’s reception i s poor.

; OFF: Cancels.

is selec ted, these set tings are select able under [TUNER SET ] item. (page 23)



[LOCAL SEEK / MONO SET/ PTY SEARCH] is s electable only w hen the source is “FM”.



iPod

Available Program Type: SPEECH;

MUSIC

; NEWS; AFFAIRS; INF O; SPORT; EDUCATE; DRAMA; CULTURE ; SCIENCE; VARIED;

EASY M (music); LIGHT M (music); CLASSIC S; OTHER M (music)

TRAVEL; LEISU RE;

JAZZ; COUNTRY; NATION M (music); OLDIES; FOLK M (music)

The unit will s earch for the Program t ype categori zed under [SPEECH] or [ [SPEECH] : Roman ty peface item. ; [



The Radio Data System feature won’t work where the service is not supported by any

MUSIC

] : Italic ty peface item.

; WEATHER; FINAN CE; CHILDREN; SOCIAL ; RELIGION; PHONE IN;

; DOCUMENT

MUSIC

] if selected.

POP M (music); ROCK M (music)

;

broadcasting station.



If the volume is adjusted during reception of traf fic information, the adjusted volume is memorized automatically. It will be applied the next time Traffic Information function is turned on.

Adjust [SETTINGS] mode settings

Listening to the other external

While listening to the radio...

1 Press the volume knob to enter [FUNCTION] mode. 2 Turn the volume knob to select [SETTINGS], then press to enter. 3 Turn the volume knob to make a selection, then press to confirm.

components

Preparation : Make sure [ON] is selected for [BUILT-IN AUX/ BUILTIN AUX]. (page 7)

See table below for selection.

4 Hold to finish the procedure.

Item Selectable setting (Preset:*)

LOCAL SEEK ON: Searches only FM s tations with good r eception. ; OFF *: Cancels. SEEK MODE AUTO1 *: Automaticall y search for a station . ; AUTO2: Search in the o rder of the stations i n the preset memor y. ;

MANUAL: Manually search for a station.

AUTO MEMORY YES: Automat ically starts m emorizing 6 stat ions with good rece ption. ; NO *: Cancels (autom atic memorizing is

PAR

VOICE

iPod

not activated). (Selectable only if [NORMAL/ NORM] is selec ted for [PRESET TY PE].) (page 7) MONO SET ON: Improves the FM r eception (but the s tereo effec t may be lost). ; OFF *: Cancels (stereo effe ct resumes). PTY SEAR CH Selects the av ailable Program Type (pag e 9). Then, press

Press the vo lume knob to enter PTY lang uage selection . Turn the volume k nob to select the P TY language

(ENGLISH */ FRENCH/ GERMAN), then press to co nfirm. TI ON: The traff ic information automatically when the traffic bulletin s tarts. ; OFF *: Cancels. (Not applicable if “MW/

LW” is selected)

NEWS SET 00M – 90M: Se ts the time for rec eiving the next ne ws bulletin. ; OFF *: Cancels. AF SET ON *: Automat ically searches for an other station bro adcasting the sa me program in the same R adio Data System

networ k with better re ception when the cur rent reception is poo r. ; OFF: Cancels. REGIONAL O N *: Switches to another s tation only in the spe cific region usin g the “AF” control. ; OFF: Cancels.

/ ¢ to start searching.

1 Press SRC to select “AUX”. 2 Turn on the external component and

start playing.

3 Turn the volume knob to adjust the

volume.

Portable audio device (commercially available)

Auxiliary input jack

3.5 mm stereo mini plug (commercially available)

8 English English 9

Listening to a Disc/ USB device/ iPod

Ejects the disc. (“NO DISC” appears and “IN”

Loading slot

PAR

VOICE



Press to select track/file.



Press and hold to fastforwards/fast-backwards.

Press to select folder of Audio File/iPod.

Start playing a disc

1 Press SRC to turn on the power. 2 Insert a disc into the loading slot.

Playback starts automatically.

Start playing a USB device or iPod

1 Press SRC to turn on the power. 2 Slide open the cover. 3 Connect a USB device or iPod to the USB

terminal.

The source automatically switches, and playback starts.

USB device

USB device (commercially available)

CA-U1EX (Max.: 5 00 mA) (optional accessory)

indicator goes off.)

iPod

USB terminal

Press to pause. Press again to resume playback.

iPod (KDC-BT42U only)

Apple iPod (commercially available)

KCA-i P102 (optional accessory)

Removing the USB device or iPod

1 Press SRC to select a source other than

“USB” or “iPod”.

2 Remove the USB device or iPod.

Selecting Repeat Play

Press number button 4 (REP) repeatedly to make a selection.

Audio CD : TRACK/TRAC (track) REPEAT,

RE PEAT OFF

Audio File :

FILE REPEAT, FOLDER/FOLD (folder) RE PEAT, REPEAT O FF

iPod :

FILE REPEAT, REPEAT OFF

Selecting Random Play

Press number button 3 (ALL RDM) repeatedly to make a selection.

Audio CD : DISC RANDOM, RANDOM OFF Audio File/ iPod :

FOLDER/FOLD (folder) RANDOM, RANDOM OFF

All Random Play

Press and hold number button 3 (ALL RDM).

Pressing this button again plays songs in the normal mode starting.

Audio File/ iPod :

ALL RANDOM, RANDOM OFF



Changes the iPod browsing item to “songs”.

Selecting a folder/track/file

1 Press to enter Music Search mode.

“SEARCH” appears, then the current file name appears on the display.

2 Turn the volume knob to select a folder/

track/ file, then press to confirm.



To skips songs, press 4/ ¢. Holding 4/ ¢ skips songs at 10% regardless of

the setting made. (page 12 ) This operation is ef fective only for the iPod or KENWOOD Music Editor media.



To return to the root folder (audio file), top menu (iPod) or first track (audio CD), press 5.



To return to the previous folder, press .



To cancel the Music Search mode, press and hold .



< or > on the display indicates that preceded/next item is available.

CONTENTS

Alphabet Search for iPod

• FunctionofKDC-BT42U.

1 Press to enter Music Search mode.

“SEARCH” appears.

2 Turn the volume knob to select a

category, then press to confirm.

3 Press again to enter alphabet search

mode.

“SEARCH <_ >” appears.

4 Turn the volume knob to select the

character to be searched for.

5 Press 4 / ¢ to move to the entry

position.

You can enter up to three characters.

6 Press the volume knob to start searching.

After this step, see step 2 of <Selecting a

folder/track/file> (page 11) to select a

song.



To return to the Music Search mode, press



To cancel the Music Search mode, press and hold .



A longer searching time is required if there are many songs or playlists in the iPod.



To search for a character other than A to Z and 0 to 9, enter only “ * ”.



The article (a, an, the) of songs name will be skipped during search.

Selecting App & iPod Control Mode

• FunctionofKDC-BT42U.

Press number button 5 (iPod) repeatedly to make a selection.

MODE ON :

Control iPod from the iPod *. “APP&iPod MODE” appears on the display.

MODE OFF: Control iPod from the unit.

* Youcanstillcontrolplay/pause,selectfiles,fast-

forward/reversefilesfromtheunit.

10 English English 11

+ 12 hidden pages