Kenwood KDC-164UR, KDC-164UG, KDC-164UB, KDC-131Y, KDC-121RY User guide [ml]

KDC-364U

KDC-164UG

KDC-121RY KDC-264UB KDC-164UR

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

CD-PECИBEP

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

CD-РЕСІВЕР

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

KDC-164UB KDC-131Y

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.

The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Notice:

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei

enthalt.

For Israel

Declaration of Conformity with regard to the EMC Directive 2004/108/EC Declaration of Conformity with regard to the RoHS Directive 2011/65/EU Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU-Vertreter:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Декларация соответствия относительно Директивы 2004/108/EC Электромагнитная совместимость Декларация соответствия относительно Директивы 2011/65/EU об ограничении содержания вредных веществ Производитель:

ДжейВиСи КЕНВУД Корпорейшн 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Япония

Представительство в EC:

ДжейВиСиКЕНВУД Нидерланд Би.Ви. Amsterdamseweg 37, 1422 AC UITHOORN, Нидерланды

Декларація про відповідність вимогам Директиви EMC 2004/108/EC Декларація про відповідність вимогам Директиви RoHS 2011/65/EU Виробник:

JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

Представник у ЕС:

JVCKENWOOD NEDERLAND B.V. Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Kennzeichnung von Geräten mit Laser-Abtastern

Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts besteht.

Маркировка изделий, использующих лазеры

К корпусу устройства прикреплена табличка, указывающая, что устройство использует лазерные лучи класса 1. Это означает, что в устройстве используются лазерные лучи слабой интенсивности. Они не представляют опасности и не распространяют опасную радиацию вне устройства.

Маркування виробів, обладнаних лазером

На каркас/корпус поміщається наклейка, в якій зазначається, що даний виріб випромінюєє лазерні промені Класу 1. Це означає, що даний апарат використовує лазерні промені слабшого класу. За межами даного апарату не існує небезпеки лазерного випромінювання.

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства. Этот срок является временем, в течение которого потребитель данного товара может безопасно им пользоваться при условии соблюдения инструкции по эксплуатации данного товара, проводя необходимое обслуживание, включающее замену расходных материалов и/или соответствующее ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного свидетельства KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

DISPLAY SETTINGS 9

AUDIO SETTINGS 10

TROUBLESHOOTING 11

MORE INFORMATION 12

SPECIFICATIONS 13

INSTALLATION / CONNECTION 14

How to read this manual

• Operations are explained mainly using buttons on the faceplate of

• [

• ( available on the stated page.

] indicates the selected items.

XX) indicates references are

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accidents.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the external device if it might hinder safe driving.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

• If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Cleaning the connector: Detach the faceplate and clean the connector

gently with a cotton swab, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicone or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press)

Display window

Loading slot

Attach

Detach

Remote control (RC-406)

Remote sensor (Do not expose to bright sunlight.)

Not used

(supplied for )

Pull out the insulation sheet when using for the first time.

How to reset

Detach button

Your preset adjustments will also be erased.

To On the faceplate On the remote control

Turn on the power

Adjust the volume Turn the volume knob. Press

Select a source

Change the display information

Press

• Press and hold to turn off the power.

Press

• Press and hold to scroll the current display information.

repeatedly.

Remote control functions are not available for

How to replace the battery

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

or .

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Press SRC repeatedly.

( not available )

/ / /

/ / .

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power (or after you reset the unit), the display shows: “SELLANGUAGE”

1 Turn the volume knob to select [

then press the knob.

[

ENG

] is selected for the initial setup.

Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME

KNOB”.

“PRESS” “VOLUMEKNOB”

ENG

] (English) or [

RUS

] (Russian),

2 Press the volume knob.

[

YES

] is selected for the initial setup.

3 Press the volume knob again.

“DEMOOFF” appears.

Set the clock

Press the volume knob to enter [

1 2 Turn the volume knob to select [ 3 Turn the volume knob to select [

FUNCTION

CLOCK

], then press the knob.

CLOCK ADJUST

], then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Day

5 Turn the volume knob to select [ 6 Turn the volume knob to select [

Hour Minute

CLOCK FORMAT 12H

] or [

24H

], then press the knob.

7 Press and hold to exit.

To return to the previous setting item, press .

(For / / / /

While in clock display screen...

Press and hold

Then, perform step

1 2 Press the volume knob to enter [

For

)

to enter clock adjustment mode directly.

4 to set the clock.

Set the initial settings

Press to enter STANDBY.

/ , pressing AUD enter [

directly.

FUNCTION

AUDIO CONTROL

]

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

Default:

AUDIO CONTROL

SWITCH PREOUT

SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM

DISPLAY

EASY MENU

(Except for ) REAR

SUB-W

connected to the line out terminals on the rear (through an external amplifier).

or 4inches, 6×9inches or 6inches) or OEM speakers for optimum performance.

(For / ) ON

entering [ remain as [

: Selects whether rear speakers or a subwoofer are

: Selects according to the speaker size (5inches

:Both display and button illumination change to white color when

FUNCTION

].;

OFF

COLORSELECT

:Both display and button illumination

] color. ( 9)

GETTING STARTED RADIO

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP SOURCE SELECT

BUILT-IN AUX

P-OFF WAIT

CD READ 1

F/W UPDATE

UPDATE SYSTEM

F/W UP xx.xx

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

NORMAL

:Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW).; regardless of the selected band.

:Activates the keypress tone.;

:Enables AUX in source selection.;

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

: 20minutes;

WAIT TIME – – –

:Automatically distinguishes between audio file disc and music CD.;

2:Forces to play as a music CD. No sound can be heard if an audio file disc is

played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

:The clock time is shown on the display even when the unit is turned off.;

OFF

:Cancels.

Selected language is use as the display langauge for [ and Tag information (folder name, file name, song title, artist name, album name) if applicable.

MIX

:Memorizes one station for each preset button,

OFF

:Deactivates.

OFF

:Disables. ( 9)

40M

: 40minutes;

:Cancels

60M

: 60minutes;

FUNCTION

] menu

Search for a station

Press repeatedly to select TUNER.

1 2 Press repeatedly (or press / on RC-406)

to select FM1/ FM2/ FM3/ MW/ LW.

3 Press S/T (or press S/ on RC-406) to search for a

station.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons

(1to6).

• To select a stored station: Press one of the number buttons (1to6)

(or press one of the number buttons (1to6) on RC-406).

Direct Access Tuning (using RC-406)

1 Press DIRECT to enter Direct Access Tuning.

“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.

2 Press the number buttons to enter a frequency. 3 Press to search for a station.

• To cancel, press or DIRECT.

• If no operation is done for 10seconds after step Tuning is automatically canceled.

(for )

2, Direct Access

ENGLISH

RADIO

Other settings

Press the volume knob to enter [

FUNCTION

2 Turn the volume knob to make a selection (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

TUNER SETTING

LOCAL SEEK*

AUTO MEMORY

MONO SET ON

NEWS SET ON

REGIONAL ON

AF SET ON

TI* ON

PTY SEARCH

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once you change

the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.; NO:Cancels.

•

Selectable only if [

:Improves the FM reception, but the stereo effect may be lost.;

:The unit will temporarily switch to News Programme if available. ;

: Switches to another station only in the specific region using the “AF” control.;

OFF

:Cancels.

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

: Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language ( Selects the available Program Type (see the following), then, press start.

OFF

NORMAL

] is selected for [

OFF

:Cancels.

: Cancels.

ENGLISH/ FRENCH/ GERMAN

OFF

: Cancels.

PRESET TYP

E]. ( 5)

OFF

:Cancels.

OFF

), then press the knob.

S / T

:Cancels.

CLOCK

TIME SYNC

* Only for FM source.

• [

LOCAL SEEK

[

PTY SEARCH

• Available Program Type:

SPEECH

MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M

The unit will search for the Program Type categorized under

[

SPEECH

• If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin is turned on.

:Synchronizes the unit’s time to the Radio Data System station

time.;

OFF

:Cancels.

]/ [

MONO SET

]/ [

NEWS SET

]/ [

REGIONAL

] is selectable only when the band is FM1/ FM2/ FM3.

: NEWS

, AFFAIRS

CULTURE SOCIAL

(music), CLASSICS (music), OLDIES

] or [

, INFO (information), SPORT

, SCIENCE

, RELIGION

MUSIC

, VARIED

, PHONE IN

, OTHER M (music), JAZZ

, FOLK M (music)

] if selected.

, WEATHER

, TRAVEL

]/ [

, EDUCATE

, FINANCE

, LEISURE

, COUNTRY

AF SET

]/ [TI]/

, CHILDREN

, DOCUMENT

, NATION M

, DRAMA

CD / USB / iPod / ANDROID

Start playback

The source changes automatically and playback starts.

Eject disc

USB input terminal

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

(for /

KCA-iP102 / KCA-iP103 (optional accessory) of the iPod/iPhone

ANDROID

Micro USB 2.0 cable (commercially available)

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

Label side

)

or accessory cable

To On the faceplate On the remote control

Playback / pause Press .

Reverse / Fast-forward Select a track/file Select a folder

Repeat play

Press and hold S/T. Press and hold S/ . Press S/T. Press S/

Press J/K. Press repeatedly.

TRACK REPEAT/ REPEAT OFF FILE REPEAT/ FOLDER REPEAT/ REPEAT OFF

: Audio CD

Press

/ .

: MP3/WMA/WAV file, iPod or

ANDROID

Random play

FILE REPEAT/ REPEAT OFF

Press or repeatedly.

DISC RANDOM/ RANDOM OFF FOLDER RANDOM/ RANDOM OFF

: KME Light/ KMC file

: Audio CD

: MP3/WMA/WAV file, KME Light/ KMC

file, iPod or ANDROID

Select control mode

(for /

)

Select music drive (

8, [

MUSIC DRIVE]

)

Press and hold While in iPod source, press and hold iPod.

MODE ON

: Control from the iPod

MODE OFF

: Control from the unit

While in ANDROID source,

or to select

( 8, [

ANDROID SETUP])

ALL RANDOM

Press 5 repeatedly.

The stored songs in the following start playback.

• Selected internal or external memory of a smartphone (Mass Storage Class).

• Selected drive of a multiple drives device.

ENGLISH

CD / USB / iPod / ANDROID

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. (

For ANDROID: Applicable only when [

For CD: Only for MP3/WMA files. This does not work for iPod/ ANDROID.

For iPod/ ANDROID: Applicable only when [

KME Light : KENWOOD Music Editor Light, KMC : KENWOOD Music Control ( 12)

For CD: Only for MP3/WMA files.

You can still play/pause, file skip, fast-forward or reverse files from the unit.

BROWSE MODE

MODE OFF

] is selected. ( [

]/ [

BROWSE MODE

ANDROID SETUP

Select a file from a folder/list

Press .

1 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

For USB (for KME Light/ KMC files):

Press S/T to search at a preset skip search ratio. ( Press and hold S/T to search at a 10

• Not applicable for CD and MP3/WMA/WAV files. For iPod:

You can search for a file according to the first character.

ratio.

Turn the volume knob quickly to enter character search. Turn the volume knob to select the character.

To search for a character other than A to Z and 0to9, enter only “

”.

Press S/T to move to the entry position.

• You can enter up to 3characters.

Press the volume knob to start searching.

• To return to the root folder/ first file/ top menu, press 5.

• To return to the previous setting item, press

• To cancel, press and hold

• For iPod, applicable only when [

• For ANDROID, applicable only when [ (

[

ANDROID SETUP

])

MODE OFF

BROWSE MODE

] is selected. ( 7)

] is selected.

[

SKIP SEARCH

12)

Direct Music Search (using RC-406)

(for )

1 Press DIRECT. 2 Press the number buttons to enter a track/file number.

])

3 Press to search for music.

• To cancel, press or DIRECT.

• Not available if Random Play is selected.

• Not applicable for iPod, ANDROID, KME Light/ KMC file.

Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo

(for / )

While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the iPod/iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Other settings

Press the volume knob to enter [

1 2 Turn the volume knob to make a selection (see the following

])

table), then press the knob.

FUNCTION

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ANDROID SETUP

BROWSE MODE HAND MODE

using KENWOOD MUSIC PLAY application). However, you can still play/pause and file skip from the unit.

USB

MUSIC DRIVE DRIVE CHANGE

SKIP SEARCH 0.5%/ 1%/ 5%/ 10%

: Control from the unit (using KENWOOD MUSIC PLAY application).;

:Control other media player applications from the Android device (without

automatically and playback starts. Repeat steps

KMC file, selects the skip search ratio over the total files.

:The next drive ([

to 3 to select the following drives.

DRIVE 1

] to [

: While listening to iPod, ANDROID or KME Light/

DRIVE 5

Default:

]) is selected

AUX

Preparation:

Select [

] for [

BUILT-IN AUX

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to select [ 4 Turn the volume knob to make a selection, then press the knob.

AUX

(default)/

5 Press and hold to exit.

To return to the previous setting item, press .

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (

When a call comes in, “CALL” appears. (The audio system pauses.)

• To continue listening to the audio system during a call, press

“CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears. (The audio system resumes.)

]. ( 5)

Portable audio player

FUNCTION SYSTEM

], then press the knob.

AUX NAME SET

DVD/ PORTABLE/ GAME/ VIDEO/ TV

15)

], then press the knob.

DISPLAY SETTINGS

1 Press the volume knob to enter [ 2 Turn the volume knob to select [ 3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected/activated or follow

the instructions stated on the selected item.

5 Press and hold to exit.

To return to the previous setting item, press .

COLOR SELECT

DIMMER ON

BRIGHTNESS 0

TEXT SCROLL AUTO/ ONCE

For / .

Preset colors:

BLUE2 GREEN2 ORANGE2

VARIABLE SCAN/ CUSTOM R/G/B/

preferred key and display illumination color.

You can create your own color (when [ is selected). The color you have created can stored in [

Press and hold the volume knob to enter the detailed color

adjustment.

Press S/T to select the color (R/ G/ B) to adjust.

Turn the volume knob to adjust the level (0 — 9), then press the

knob.

:Dims the display illumination (and button illumination*1).;

OFF

:Cancels.

— 31: Selects your preferred brightness level for display illumination

(and button illumination*

automatically, or scroll only once.;

RED1/ RED2/ RED3/ PURPLE1/ PURPLE2/ PURPLE3/ PURPLE4/ BLUE1/

BLUE3/ SKYBLUE1/ SKYBLUE2/ LIGHTBLUE/ AQUA1/ AQUA2/ GREEN1/

GREEN3/ YELLOWGREEN1/ YELLOWGREEN2/ YELLOW/ ORANGE1/

ORANGERED

:Selects whether to scroll the display information

FUNCTION

DISPLAY

], then press the knob.

preset colors*2: Selects your

CUSTOM R/G/B

OFF

:Cancels.

CUSTOM R/G/B

ENGLISH

Default:

] or preset colors*2

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter [ 2 Turn the volume knob to select [

For

directly.

/ , pressing AUD enter [

3 Turn the volume knob to make a selection (see the following table),

then press the knob.

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

(or using RC-406) (for )

1 Press AUD to enter [

AUDIO CONTROL

2 Press J / K to make a selection, then press .

To return to the previous setting item, press

SUB-W LEVEL –15 BASS LEVEL –8 MID LEVEL –8 TRE LEVEL –8 EQ PRO

BASS ADJUST

MID ADJUST

TRE ADJUST

+15 (0

) Adjusts the subwoofer output level. to +8 (+6) to +8 (+5) to +8 (0)

BASS CTR FRQ

BASS LEVEL –8 BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00 BASS EXTEND ON

MID CTR FRQ

MID LEVEL –8 MID Q FACTOR 0.75/ 1.00/ 1.25

TRE CTR FRQ

TRE LEVEL –8

FUNCTION

AUDIO CONTROL

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60/ 80/ 100/ 200

Selects the center frequency.

to +8 (+6):Adjusts the level.

:Turns on the extended bass.;

0.5K/ 1.0K/ 1.5K/ 2.5K

2.5KHZ

:Selects the center frequency.

to +8 (+5):Adjusts the level.

10.0K/ 12.5K/ 15.0K/ 17.5K

15.0KHZ/ 17.5KHZ

to +8 (0):Adjusts the level.

], then press the knob.

AUDIO CONTROL

60HZ/ 80HZ/ 100HZ/ 200HZ

:Adjusts the quality factor.

OFF

:Cancels.

0.5KHZ/ 1.0KHZ/ 1.5KHZ

:Adjusts the quality factor.

:Selects the center frequency.

10.0KHZ/ 12.5KHZ

]

Default:

PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ

BASS BOOST LV1/ LV2/ LV3

LOUDNESS LV1/ LV2

SUBWOOFER SET ON LPF SUBWOOFER THROUGH

SUB-W PHASE REVERSE

HPF

FADER R15 BALANCE L15 VOLUME OFFSET

SOUND RECNSTR

(Sound reconstruction)

• [

SUB-W LEVEL

selectable only if [

• [

SUB-W LEVEL

[

SUBWOOFER SET

NATURAL/ USER

genre. (Select [ [

DRIVE EQ

running noise of the tyres.

bass boost level.;

frequencies boost to produce a well-balanced sound at a low volume level.

:Turns on the subwoofer output.;

160HZ

160Hz are sent to the subwoofer.

output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [ selected for [

(For )

THROUGH 150HZ

150Hz are sent to the speakers.

to to

For AUX: adjustment level of each source. (Before adjustment, select the source you want to adjust.)

:Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression.;

]/ [

SUBWOOFER SET

SWITCH PREOUT

]/ [

LPF SUBWOOFER

] is set to [ON].

:Selects a preset equalizer suitable to the music

USER

] to use the customized settings.)

] is a preset equalizer that reduces noise outside the car or

LEVEL1/ LEVEL2/ LEVEL3

OFF

:Cancels.

LEVEL1/ LEVEL2:Selects your preferred low and high

;

OFF

:Cancels.

OFF

:All signals are sent to the subwoofer.;

:Audio signals with frequencies lower than 85Hz/ 120Hz/

(180°)/

NORMAL

(0°):Selects the phase of the subwoofer

LPF SUBWOOFER

:All signals are sent to the speakers.;

:Audio signals with frequencies higher than 100Hz/ 120Hz/

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

–8

to +8(0) ; For other sources: –8 to 0:Presets the volume

]/ [

].)

OFF

:Cancels.

LPF SUBWOOFER

] is set to [

SUB-W PHASE

SUB-W

] is selectable only if

:Selects your preferred

:Cancels.

85HZ/ 120HZ

100HZ/ 120HZ

]/ [

SUB-W PHASE

]. ( 4)

THROUGH

] is

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

“PROTECTING SEND SERVICE” appears.

General

•

Sound cannot be heard.

•

The unit does not turn on.

•

Information shown on the

display is incorrect.

The unit does not work at all. Reset the unit. (

•

Radio reception is poor.

•

Static noise while listening

adio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as you intended them to play.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

CD / USB / iPod

correct.

Correct characters are not displayed (e.g. album name).

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

Clean the connectors. (

•

Connect the antenna firmly.

•

Pull the antenna out all the way.

Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit. (

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

This unit can only display uppercase letters, numbers, and a limited number of symbols. Uppercase Cyrillic letters can also be displayed if [ (

5)

2)

3)

РУССКИЙ

] is selected.

Symptom Remedy

“NA FILE”

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

“READ ERROR” Copy the files and folders onto the USB device again. If this

“NO DEVICE” Connect a USB device, and change the source to USB again.

CD / USB / iPod

“COPY PRO” A copy-protected file is played.

“NA DEVICE” Connect a supported USB device, and check the

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

•

Sound cannot be heard

during playback.

•

Sound output only

from the Android device.

ANDROID

Make sure the disc contains supported audio files.

your nearest service center.

does not solve the problem, reset the USB device or use another USB device.

connections.

•

Reconnect the iPod.

•

Reset the iPod.

•

Reconnect the Android device.

•

If in [

HAND MODE

application on the Android device and start playback.

•

If in [

HAND MODE

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected

Android device is unable to route the audio signal to unit. (

], launch any media player

], relaunch the current media player

12)

( 12)

ENGLISH

Symptom Remedy

Cannot playback at [

BROWSE MODE

“NO DEVICE” or “READING” keeps

ANDROID

flashing.

Playback is intermittent or sound skips.

“ANDROID ERROR” / “NADEVICE”

•

Make sure KENWOOD MUSIC

PLAY APP is installed on the

Android device. (

•

Reconnect the Android device

and make the appropriate setting in [ (

•

If this does not solve the

problem, the connected Android device does not support [

BROWSE MODE

Android device

•

Switch off the developer options

on the Android device.

•

Reconnect the Android device.

•

If this does not solve the

problem, the connected Android device does not support [

BROWSE MODE

Android device

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

8)

ANDROID SETUP

]. ( 

About

)

]. ( 

About

)

MORE INFORMATIONTROUBLESHOOTING

General

•

This unit can only play the following CDs:

•

Detailed information and notes about the playable audio

files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

•

Playable audio file: MP3 (.mp3), WMA (.wma)

•

Playable disc media: CD-R/CD-RW/CD-ROM

•

Playable disc file format: ISO 9660 Level 1/2, Joliet, Long

file name.

•

Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

•

Discs that are not round.

•

Discs with coloring on the recording surface or discs that

are dirty.

•

Recordable/ReWritable discs that have not been

finalized.

•

8cm CD. Attempting to insert using an adapter may

cause malfunction.

About USB devices

•

This unit can play MP3/WMA/WAV files stored on a USB

mass storage class device.

•

You cannot connect a USB device via a USB hub.

•

Connecting a cable whose total length is longer than 5m

may result in abnormal playback.

•

This unit cannot recognize a USB device whose rating is

other than 5V and exceeds 1A.

About KENWOOD Music Editor Light and KENWOOD Music Control

•

This unit supports the PC application KENWOOD Music

Editor Light and Android™ application KENWOOD Music Control.

•

When you play audio files with song data added using

the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.

•

KENWOOD Music Editor Light and KENWOOD Music

Control are available on the following web site: www.kenwood.com/cs/ce/

About iPod/iPhone

Made for

iPod touch (2nd, 3rd, 4th, and 5th generation)

iPod classic

iPod nano (3rd, 4th, 5th, 6th, and 7th generation)

iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C

•

For the latest compatible list and software versions of

iPhone/iPod, see: www.kenwood.com/cs/ce/ipod

•

You cannot operate iPod if “KENWOOD” or “ ” is

displayed on iPod.

About Android device

•

This unit supports Android OS 4.1 and above.

•

Some Android devices (with OS 4.1 and above) may not

fully support Android Open Accessory (AOA) 2.0.

•

If the Android device supports both mass storage class

device and AOA 2.0, this unit always playback via AOA

2.0 as priority.

•

For more information and the latest compatible list, see:

www.kenwood.com/cs/ce/

SPECIFICATIONS

FM Frequency Range 87.5MHz — 108.0MHz (50kHz space)

Usable Sensitivity (S/N=26dB) 0.71μV/75Ω

Quieting Sensitivity (DINS/N=46dB)

Frequency Response (±3dB) 30Hz — 15kHz

Signal-to-Noise Ratio (MONO) 64dB

Tuner

Stereo Separation (1kHz) 40dB

MW Frequency Range 531kHz — 1611kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 28.2μV

LW Frequency Range 153kHz — 279kHz (9kHz space)

Usable Sensitivity (S/N=20dB) 50μV

Laser Diode GaAIAs

Digital Filter (D/A) 8 times over sampling

Spindle Speed 500rpm — 200rpm (CLV)

Wow & Flutter Below measurable limit

Frequency Response (±1dB) 20Hz — 20kHz

Total Harmonic Distortion (1kHz) 0.01%

CD player

Signal-to-Noise Ratio (1kHz) 105 dB

Dynamic Range 90dB

Channel Separation 85dB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

2.0μV/75Ω

USB Standard USB1.1, USB2.0

File System FAT12/16/32

Maximum Supply Current DC5V

USB

MP3 Decode Compliant with MPEG-1/2 Audio Layer-3

WMA Decode Compliant with Windows Media Audio

WAV Decode Linear-PCM

Maximum Output Power 50W×4

Full Bandwidth Power 22W×4 (at less than 1% THD)

Speaker Impedance 4Ω—8Ω

Tone Action Bass 200Hz±8dB

Audio

Preout Level/Load (CD) 2500mV/10kΩ

Preout Impedance ≤600Ω



Frequency Response (±3dB) 20Hz—20kHz

Input Maximum Voltage 1000mV

Auxiliary

Input Impedance 30kΩ

Operating Voltage 14.4V (10.5V—16V allowable)



Maximum Current Consumption 10A

Operational Temperature Range 0°C—+40°C

General

Installation Size (W×H×D) 182mm×53mm×159mm

Weight 1.2kg

Subject to change without notice.

1A

Middle 2.5kHz±8dB

Treble 12.5kHz±8dB

ENGLISH

Warning

•

The unit can only be used with a 12V DC power supply, negative ground.

•

Disconnect the battery’s negative terminal before wiring and mounting.

•

Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis

or Ground wire (black) to prevent a short circuit.

•

Insulate unconnected wires with vinyl tape to prevent a short circuit.

•

Be sure to ground this unit to the car’s chassis again after installation.

Caution

•

For safety’s sake, leave wiring and mounting to professionals. Consult the car

audio dealer.

•

Install this unit in the console of your vehicle. Do not touch the metal parts of

this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.

•

Do not connect the [ wires of speakers to the car chassis or Ground wire

(black), or connect them in parallel.

•

Mount the unit at an angle of less than 30º.

•

If your vehicle wiring harness does not have the ignition terminal, connect

Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.

•

Keep all cables away from heat dissipate metal parts.

INSTALLATION / CONNECTION

•

After the unit is installed, check whether the brake lamps, blinkers, wipers, etc.

on the car are working properly.

•

If the fuse blows, first make sure the wires are not touching car’s chassis, then

replace the old fuse with one that has the same rating.

Basic procedure 1

Remove the key from the ignition switch, then disconnect the [ terminal of the car battery.

2 Connect the wires properly.

See Wiring connection. (

15)

3 Install the unit to your car.

See Installing the unit (in-dash mounting).

4 Connect the [ terminal of the car battery. 5 Reset the unit. ( 

)

Installing the unit (in-dash mounting)

Hook on the top side

Orientate the trim plate as illustrated before fitting.

How to remove the unit 1

Detach the faceplate.

2 Fit the catch pin on the extraction

keys into the holes on both sides of the trim plate, then pull it out.

3 Insert the extraction keys deeply

into the slots on each side, then follow the arrows as shown on the right.

Do the required wiring. (

15)

Dashboard of your car

Bend the appropriate tabs to hold the mounting sleeve firmly in place.

Wiring connection

Antenna terminal

Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles

You may need to modify the wiring of the supplied wiring harness as illustrated below.

A7 (Red)

Ignition wire (Red)

Vehicle

A4 (Yellow)

Battery wire (Yellow)

Default wiring

Color and function

A4 Yellow : Battery

A5 Blue/White : Power control A7 Red : Ignition (ACC) A8 Black : Earth (ground) connection B1

Purple B2 B3 B4 B5 B6 B7 B8

]

Purple/black

Gray

]

Gray/black

White

]

White/black

]

Green

Green/black

[

: Rear speaker (right)

: Front speaker (right)

: Front speaker (left)

: Rear speaker (left)

Unit

Yellow (Battery wire)

Red (Ignition wire)

Red (A7)

Yellow (A4)

ISO connectors

Rear/ Front/ Subwoofer output

Fuse (10A)

If no connections are made, do not let the wire come out

from the tab.

Light blue/yellow (Steering remote

control wire)

Blue/White (Power control

wire/ Antenna control wire)

Brown (Mute control wire)

STEERING WHEEL

REMOTE INPUT

REMOTE CONT

ANT CONT

P. CONT

MUTE

To the steering wheel remote control adapter

To the power control terminal when using the optional power amplifier or to the antenna control terminal in the vehicle

To the terminal that is grounded when the telephone rings or during conversation ( (To connect the Kenwood navigation system, refer your navigations manual.)

Part list for installation

(A)

Faceplate

(B)

Trim plate

(C)

Mounting sleeve

(D)

Wiring harness

(E)

Extraction key

9)

ENGLISH

INHALT VOR DER INBETRIEBNAHME

VOR DER INBETRIEBNAHME 2

GRUNDLAGEN 3

ERSTE SCHRITTE 4

RADIO 5

CD / USB / iPod / ANDROID 7

AUX 9

DISPLAY-EINSTELLUNGEN 9

AUDIOEINSTELLUNGEN 10

FEHLERSUCHE 11

WEITERE INFORMATIONEN 12

TECHNISCHE DATEN 13

EINBAU / ANSCHLUSS 14

Wie Sie diese Anleitung lesen

•

Die Bedienung wird im Wesentlichen

anhand der Tasten auf der Frontblende des

• [XX

] zeigt die gewählten Punkte an.

•

( XX) zeigt an, das

Bezugsinformationen auf der angegebenen Seitennummer vorhanden sind.

erläutert.

Warnung

Bedienen Sie keine Funktion, die Ihre Aufmerksamkeit vom Straßenverkehr ablenkt.

Vorsicht

Lautstärkeeinstellung:

•

Stellen Sie die Lautstärke so ein, dass Sie immer noch Geräusche von außerhalb des Fahrzeugs hören können, um Unfälle zu vermeiden.

•

Senken Sie die Lautstärke vor dem Abspielen digitaler Tonquellen, um Beschädigung der Lautsprecher durch plötzliche

Tonspitzen zu vermeiden.

Allgemeines:

•

Vermeiden Sie Verwendung des externen Geräts, wenn dieses das sichere Fahren behindern kann.

•

Stellen Sie sicher, dass alle wichtigen Daten gesichert sind. Wir übernehmen keine Haftung für jeglichen Verlust

aufgenommener Daten.

•

Stellen Sie sicher, dass keine Metallgegenstände (wie etwa Münzen oder Werkzeuge) ins Innere des Geräts gelangen und

Kurzschlüsse verursachen.

•

Wenn ein Disc-Fehler durch Kondensationsbildung auf der Laserlinse auftritt, werfen Sie die Disc aus und warten Sie eine Zeit

lang, bis die Kondensation getrocknet ist.

Fernbedienung (RC-406):

•

Lassen Sie die Fernbedienung nicht an heißen Orten wie beispielsweise auf dem Armaturenbrett liegen.

•

Es besteht die Gefahr, dass die Lithiumbatterie explodiert, wenn sie verkehrt eingesetzt wird. Ersetzen sie sie ausschließlich

durch eine des gleichen oder eines gleichwertigen Typs.

•

Akkus oder Batterien dürfen keiner großen Hitze, wie beispielsweise Sonneneinstrahlung, Feuer oder Ähnlichem, ausgesetzt werden.

•

Bewahren Sie Batterie bis zur Verwendung außerhalb der Reichweite von Kindern und in der Originalverpackung auf. Entsorgen

Sie gebrauchte Batterien umgehend. Bei Verschlucken der Batterie sofort einen Arzt aufsuchen.

Wartung

Reinigung des Geräts: Wischen Sie die Frontblende mit einem trockenen Silikonlappen oder weichen Lappen sauber. Reinigung des Steckverbinders: Die Frontblende abnehmen und den Anschluss sanft

mit einem Wattetupfer oder Lappen reinigen, wobei darauf geachtet werden muss, die Anschlusskontakte nicht zu beschädigen.

Handhabung von Discs:

•

Berühren Sie nicht die Aufnahme-Oberfläche der Disc.

•

Kleben Sie keine Aufkleber oder ähnliches auf eine Disc. Verwenden Sie dem

entsprechend auch keine Discs, auf denen sich bereits ein Aufkleber befindet.

•

Verwenden Sie kein Zubehör für die Disc.

•

Reinigen Sie CDs stets von der Mitte einer Disc nach außen hin.

•

Reinigen Sie die Disc mit einem trockenen Silikonlappen oder weichen Lappen. Verwenden Sie keine Lösungsmittel.

•

Ziehen Sie Discs beim Entfernen aus dem Gerät horizontal heraus.

•

Entfernen Sie vor dem Einsetzen einer Disc die Grate vom Mittenloch und der Disc-Kante.

Anschluss (an der Rückseite der Frontblende)

+ 42 hidden pages