Kenwood KCA-R70FM User Manual 2
KCA-R70FM Instruction Manual Addendum:
Kenwood Music Keg features
Playing Songs
Select the Kenwood Music Keg
Press the [
SRC
] button repeatedly until the display reads
“CHANGER”
Selecting playlists:
Press the [ ] button to move to the next playlist
Press the [ ] button to move to the previous playlist
Selecting songs:
Press the [
>>l
] button to skip to the next song
Press the [
l<<
] button to skip to the previous song
• The selected song plays automatically
Pausing a song:
Press the [
>/ll
] button to pause the song; press the button
again to resume playing the song
Scanning songs:
You can play the first part of each song in the selected playlist and
select the song you want to listen to
Press the [
SCAN
] button to begin scanning songs
Press the [
SCAN
] button again when you hear the song
you want to play
Random Play:
Play all the songs in a playlist or in the Music Keg in random order
Press the [
RDM
] button to play all of the songs in the
currently-selected playlist randomly; press the button
again to stop Random Play
Press the [
M.RDM
] button to play all of the songs in the
Music Keg randomly; press the button
again to stop Random Play
• Press the [
>>l
] button to skip to the next randomly
selected song
• When Random Play is active, the “RDM” indicator
illuminates. In [
RDM
] mode the track number flashes;
in [
M.RDM
] mode the disc and track numbers flash.
Repeat Play:
You can repeat a single song, or all the songs in a playlist
Press the [
REP
] button to repeat the current song
Press the [
REP
] button again to repeat all the songs in
the currently-selected playlist
Press the [
REP
] button again to stop Repeat Play
Viewing Information on the Display
Press the [
DISP
] button repeatedly to cycle through the
following information (up to 36 characters):
P.TIME (elapsed time of the current song)
D.TITLE (name of the current playlist)
T.TITLE (name of the current track)
Kenwood Music Keg connection note
If you are using the KCA-R70FM and a Kenwood Music Keg with a head unit that has an Aux (preamp) Input, you can connect the Music
Keg’s preamp outputs directly to the head unit’s Aux Inputs and use the KCA-R70FM to control the Music Keg without using the FM modulator for the audio signal. Consult the instruction manuals for the Music Keg and the head unit for further information.
©2002 Kenwood USA Corporation. All rights reserved
KCA-R70FM Instruction Manual Addendum:
Sirius Satellite Radio tuner features
Listening to Radio Stations
Select the Sirius mode:
Press the [
SRC
] button until the display reads “SIRIUS”
Selecting a Category:
Press the [
SRCH ((>/ll)
] button
Press the [ ] button to move to the next category
Press the [ ] button to move to the previous category
Selecting a Channel:
Press the [
>>l
] button to skip to the next channel
Press the [
l<<
] button to skip to the previous channel
Scanning Channels:
Press the [
SEEK
] button so the display shows “SEEK 1”
Press and hold the [
SEEK
] button for at least one second
Release the [
SEEK
] button when you hear the channel you
want to listen to
Selecting a Channel Directly (using the remote):
You can use the remote to select a channel directly by number
Press the [
DIRECT
] button on the remote
Use the remote’s number buttons to enter the channel number
Press the [
l<<
] or [
>>l
] button to receive the channel
• You can select up to Channel number 223
• If you don’t press a button for 10 seconds, the Direct
Access mode is automatically cancelled
Viewing Information on the Display
Press the [
DISP
] button repeatedly to cycle through the
following information:
CHANNEL (name of the current channel)
SONG (name of the currently-playing song)
ARTIST (name of the currently-playing artist)
CATEGORY (name of the current category)
ALBUM (name of the current album)
Using Station Presets with Sirius Satellite Radio
Select the Preset Band:
Press the [ ] button. The Preset Band cycles between
SR1/SR2/SR3/SR4 with each press of the button.
Entering a Channel in memory:
Press the [ ] button to select the desired Preset Band
Select the Channel you want to put into memory (see above)
Press and hold a preset [#1] – [#6] button for at least 2
seconds to memorize the station in that position
• The preset number display will blink once
Selecting a Preset Channel:
Press the [ ] button to select the desired Preset Band
Press the desired preset button [#1] – [#6]
Scanning Preset Channels
Press the [
SEEK
] button so the display shows “SEEK 2”
Press the [
>>l
] button to skip to the next preset
Press the [
l<<
] button to skip to the previous preset
Loading...