Kenwood DPX-5100BT User Manual [ru]

DPX-5100BT

DUAL DIN SIZED CD RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER CD-RECEIVER

BEDIENUNGSANLEITUNG

SINTOLETTORE CD DI DIMENSIONI DUE DIN

ISTRUZIONI PER L’USO

CD-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ПРИЙМАЧ CD ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

DPX-M3100BT

DUAL DIN SIZED DIGITAL MEDIA RECEIVER

INSTRUCTION MANUAL

DUALER DIN-GENORMTER DIGITALER MEDIEN-RECEIVER

BEDIENUNGSANLEITUNG

SINTOLETTORE DIGITALE DI DIMENSIONI DUE DIN

ISTRUZIONI PER L’USO

ЦИФРОВОЙ МЕДИА-РЕСИВЕР РАЗМЕРА 2DIN

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

ЦИФРОВИЙ МЕДІА-РЕСІВЕР ПОДВІЙНОГО DIN-РОЗМІРУ

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Entsorgung von gebrauchten elektrischen und elektronischen Geräten und Batterien (anzuwenden in Ländern mit einem separaten Sammelsystem für solche Geräte)

Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und elektronischen Geräten und batterien abgegeben werden muss. Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit. Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer Gemeinde oder den kommunalen Entsorgungsbetrieben. Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese Batterie Blei enthalt.

Informazioni sullo smaltimento delle vecchie apparecchiature elettriche ed elettroniche e delle batterie (valide per i paesi che hanno adottato sistemi di raccolta differenziata)

I prodotti e le batterie recanti il simbolo di un cassonetto della spazzatura su ruote barrato non possono essere smaltiti insieme ai normali rifiuti di casa. I vecchi prodotti elettrici ed elettronici e le batterie devono essere riciclati presso un’apposita struttura in grado di trattare questi prodotti e di smaltirne i loro componenti. Per conoscere dove e come recapitare tali prodotti nel luogo a voi più vicino, contattare l’apposito ufficio comunale. Un appropriato riciclo e smaltimento aiuta a conservare la natura e a prevenire effetti nocivi alla salute e all’ambiente. Nota: Il simbolo “Pb” sotto al simbolo delle batterie indica che questa batteria contiene piombo.

For Israel

For Turkey

Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin Kontrolü Yönetmeliğe uygun olarak üretilmiştir.

Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (atık yan ürün toplama sistemlerini kullanan ülkeleri için uygulanabilir)

Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları olarak atılamaz. Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken kaynakların korunmasına da yardımcı olacaktır.

Дата изготовления (месяц/год) находится на этикетке устройства.

В соответствии с Законом Российской Федерации “О защите прав потребителей” срок службы (годности) данного товара “по истечении которого он может представлять опасность для жизни, здоровья потребителя, причинять вред его имуществу или окружающей среде” составляет семь (7) лет со дня производства.

Дополнительные косметические материалы к данному товару, поставляемые вместе с ним, могут храниться в течение двух (2) лет со дня его производства.

Срок службы (годности), кроме срока хранения дополнительных косметических материалов, упомянутых в предыдущих двух пунктах, не затрагивает никаких других прав потребителя, в частности, гарантийного обслуживания KENWOOD, которое он может получить в соответствии с законом о правах потребителя или других законов, связанных с ним.

Условия хранения:

Температура : от -30°C до +85°C Влажность : от 0% до 90%

Декларація про Відповідність Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР:

1. свинець(Pb) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

2. кадмій (Cd)– не перевищує 0.01 % ваги речовини або в концентрації до 100 частин на мільйон;

3. ртуть(Hg) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

4. шестивалентний хром (Cr 6+) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0.1% ваги речовини або в концентрації до 1000 частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0.1 % ваги речовини або в концентрації до 1000 частин на мільйон.

Declaration of Conformity with regard to the RE Directive 2014/53/EU Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU Representative:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Konformitätserklärung in Bezug auf die RE-Vorschrift 2014/53/EU Konformitätserklärung in Bezug auf die RoHS-Vorschrift 2011/65/EU

Hersteller:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

EU-Vertreter:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande

Dichiarazione di conformità alla Direttiva RE 2014/53/EU Dichiarazione di conformità relativa alla direttiva RoHS 2011/65/EU

Produttore:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Rappresentante UE:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

Декларация соответствия относительно Директивы RE 2014/53/EU Декларация соответствия относительно Директивы RoHS 2011/65/EU

Производитель:

JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, ЯПОНИЯ

Представительство в EC:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, НИДЕРЛАНДЫ

Декларація про відповідність вимогам Директиви RE 2014/53/EU Декларація про відповідність вимогам Директиви RoHS 2011/65/EU

Виробник:

JVC KENWOOD Corporation 3-12 Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, JAPAN

Представник у ЕС:

JVCKENWOOD Europe B.V. Amsterdamseweg 37, 1422 AC UITHOORN, THE NETHERLANDS

English

Hereby, JVCKENWOOD declares that the radio equipment “DPX-5100BT/DPX-M3100BT” is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.kenwood.com/cs/ce/eudoc/

Français

Par la présente, JVCKENWOOD déclare que l’équipement radio « DPX-5100BT/DPX-M3100BT » est conforme à la directive 2014/53/UE. L’intégralité de la déclaration de conformité UE est disponible à l’adresse Internet suivante : http://www.kenwood.com/cs/ce/eudoc/

Deutsch

Hiermit erklärt JVCKENWOOD, dass das Funkgerät “DPX-5100BT/DPX-M3100BT” der Richtlinie 2014/53/EU entspricht. Der volle Text der EU-Konformitätserklärung steht unter der folgenden Internetadresse zur Verfügung: http://www.kenwood.com/cs/ce/eudoc/

Nederlands

Hierbij verklaart JVCKENWOOD dat de radioapparatuur “DPX-5100BT/DPX-M3100BT” in overeenstemming is met Richtlijn 2014/53/EU. De volledige tekst van de EU-verklaring van overeenstemming is te vinden op het volgende internetadres: http://www.kenwood.com/cs/ce/eudoc/

Italiano

Con la presente, JVCKENWOOD dichiara che l΄apparecchio radio “DPX-5100BT/DPX-M3100BT” è conforme alla Direttiva 2014/53/UE. Il testo integrale della dichiarazione di conformità UE è disponibile al seguente indirizzo internet: http://www.kenwood.com/cs/ce/eudoc/

Español

Por la presente, JVCKENWOOD declara que el equipo de radio “DPX-5100BT/DPX-M3100BT” cumple la Directiva 2014/53/EU. El texto completo de la declaración de conformidad con la UE está disponible en la siguiente dirección de internet: http://www.kenwood.com/cs/ce/eudoc/

Português

Deste modo, a JVCKENWOOD declara que o equipamento de rádio “DPX-5100BT/DPX-M3100BT” está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade da UE está disponível no seguinte endereço de internet: http://www.kenwood.com/cs/ce/eudoc/

Polska

Niniejszym, JVCKENWOOD deklaruje, że sprzęt radiowy “DPX-5100BT/DPX-M3100BT” jest zgodny z dyrektywą 2014/53/UE. Pełny tekst deklaracji zgodności EU jest dostępny pod adresem: http://www.kenwood.com/cs/ce/eudoc/

Český

Společnost JVCKENWOOD tímto prohlašuje, že rádiové zařízení “DPX-5100BT/DPX-M3100BT” splňuje podmínky směrnice 2014/53/EU. Plný text EU prohlášení o shodě je dostupný na následující internetové adrese: http://www.kenwood.com/cs/ce/eudoc/

Magyar

JVCKENWOOD ezennel kijelenti, hogy a „DPX-5100BT/ DPX-M3100BT“ rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU konformitási nyilatkozat teljes szövege az alábbi weboldalon érhető el: http://www.kenwood.com/cs/ce/eudoc/

iii

Svenska

Härmed försäkrar JVCKENWOOD att radioutrustningen “DPX-5100BT/DPX-M3100BT” är i enlighet med direktiv 2014/53/EU. Den fullständiga texten av EU-försäkran om överensstämmelse finns på följande Internetadress: http://www.kenwood.com/cs/ce/eudoc/

Suomi

JVCKENWOOD julistaa täten, että radiolaite “DPX-5100BT/DPX-M3100BT” on direktiivin 2014/53/EU mukainen. EU-vaatimustenmukaisuusvakuutusvaatimus löytyy kokonaisuudessaan seuraavasta internetosoitteesta: http://www.kenwood.com/cs/ce/eudoc/

Slovensko

S tem JVCKENWOOD izjavlja, da je radijska oprema »DPX-5100BT/DPX-M3100BT« v skladu z Direktivo 2014/53/EU. Celotno besedilo direktive EU o skladnosti je dostopno na tem spletnem naslovu: http://www.kenwood.com/cs/ce/eudoc/

Slovensky

Spoločnosť JVCKENWOOD týmto vyhlasuje, že rádiové zariadenie „DPX-5100BT/DPX-M3100BT“ vyhovuje smernici 2014/53/EÚ. Celý text EÚ vyhlásenia o zhode nájdete na nasledovnej internetovej adrese: http://www.kenwood.com/cs/ce/eudoc/

Dansk

Herved erklærer JVCKENWOOD, at radioudstyret “DPX-5100BT/DPX-M3100BT” er i overensstemmelse med Direktiv 2014/53/EU. EU-overensstemmelseserklæringens fulde ordlyd er tilgængelig på følgende internetadresse: http://www.kenwood.com/cs/ce/eudoc/

Ελληνικά

Με το παρόν, η JVCKENWOOD δηλώνει ότι ο ραδιοεξοπλισμός «DPX-5100BT/DPX-M3100BT» συμμορφώνεται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ είναι διαθέσιμο στην ακόλουθη διεύθυνση στο διαδίκτυο: http://www.kenwood.com/cs/ce/eudoc/

Eesti

Käesolevaga JVCKENWOOD kinnitab, et „DPX-5100BT/DPX-M3100BT“ raadiovarustus on vastavuses direktiiviga 2014/53/EL. ELi vastavusdeklaratsiooni terviktekst on kättesaadav järgmisel internetiaadressil: http://www.kenwood.com/cs/ce/eudoc/

Latviešu

JVCKENWOOD ar šo deklarē, ka radio aparatūra „DPX-5100BT/DPX-M3100BT” atbilst direktīvas 2014/53/ES prasībām. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā tīmekļa adresē: http://www.kenwood.com/cs/ce/eudoc/

Lietuviškai

Šiuo JVCKENWOOD pažymi, kad radijo įranga „DPX-5100BT/DPX-M3100BT“ atitinka 2014/53/EB direktyvos reikalavimus. Visą EB direktyvos atitikties deklaracijos tekstą galite rasti šiuo internetiniu adresu: http://www.kenwood.com/cs/ce/eudoc/

Malti

B’dan, JVCKENWOOD jiddikjara li t-tagħmir tar-radju “DPX-5100BT/DPX-M3100BT” huwa konformi mad-Direttiva 2014/53/UE. It-test kollu tad-dikjarazzjoni ta’ konformità huwa disponibbli fl-indirizz intranet li ġej: http://www.kenwood.com/cs/ce/eudoc/

HRVATSKI / SRPSKI JEZIK

JVCKENWOOD ovim izjavljuje da je radio oprema “DPX-5100BT/DPX-M3100BT” u skladu s Direktivom 2014/53/EU. Cjeloviti tekst deklaracije Europske unije o usklađenosti dostupan je na sljedećoj internet adresi: http://www.kenwood.com/cs/ce/eudoc/

ROMÂNĂ

Prin prezenta, JVCKENWOOD declară că echipamentul radio “DPX-5100BT/DPX-M3100BT” este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației de conformitate UE este disponibil la urmatoarea adresă de internet: http://www.kenwood.com/cs/ce/eudoc/

БЪЛГАРСКИ

С настоящото JVCKENWOOD декларира, че радиооборудването на “DPX-5100BT/ DPX-M3100BT” е в съответствие с Директива 2014/53/ЕС. Пълният текст на ЕС декларацията за съответствие е достъпен на следния интернет адрес: http://www.kenwood.com/cs/ce/eudoc/

Turkish

Burada, JVCKENWOOD “DPX-5100BT/ DPX-M3100BT” radyo ekipmanının 2014/53/AB Direktifine uygun olduğunu bildirir. AB uyumluluk deklarasyonunun tam metni aşağıdaki internet adresinde mevcuttur. http://www.kenwood.com/cs/ce/eudoc/

Русский

JVCKENWOOD настоящим заявляет, что радиооборудование «DPX-5100BT/ DPX-M3100BT» соответствует Директиве 2014/53/EU. Полный текст декларации соответствия ЕС доступен по следующему адресу в сети Интернет: http://www.kenwood.com/cs/ce/eudoc/

Українська

Таким чином, компанія JVCKENWOOD заявляє, що радіообладнання «DPX-5100BT/ DPX-M3100BT» відповідає Директиві 2014/53/EU. Повний текст декларації про відповідність ЄС можна знайти в Інтернеті за такою адресою: http://www.kenwood.com/cs/ce/eudoc/

CONTENTS

BEFORE USE 2

BASICS 3

GETTING STARTED 4

1 Select the display language

and cancel the demonstration 2 Set the clock and date 3 Set the initial settings

RADIO 6

CD/USB/iPod/ANDROID 8

AUX 11

Spotify 11

BLUETOOTH® 12

AUDIO SETTINGS 20

DISPLAY SETTINGS 23

TROUBLESHOOTING 24

REFERENCES 27

Maintenance More information

SPECIFICATIONS 29

INSTALLATION/ CONNECTION 31

BEFORE USE

IMPORTANT

•

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe

Warning and Caution in this manual.

•

Please keep the manual in a safe and accessible place for future reference.

WARNING

• Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

•

Adjust the volume so that you can hear sounds outside the car to prevent accidents.

•

Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

•

Avoid using the external device if it might hinder safe driving.

•

Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

•

Never put or leave any metallic objects (such as coins or metal tools) inside the unit to prevent a short circuit.

•

For : If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

•

Depending on the types of cars, the antenna will automatically extend when you turn on the unit with the antenna control wire connected

( 34)

. Turn off the unit or change the source to STANDBY when parking at a low ceiling area.

How to read this manual

•

Operations are explained mainly using buttons on the faceplate of .

•

English indications are used for the purpose of explanation. You can select the display language from the

• [XX]

indicates the selected items.

• ( XX)

indicates references are available on the stated page.

[FUNCTION]

menu.

( 5)

ENGLISH

BASICS

Faceplate

How to reset

Eject button and loading slot

Display

window

Volume knob

To On the faceplate

Turn on the power

Adjust the volume Turn the volume knob.

Select a source

Change the display information Press DISP repeatedly.

Press

• Press and hold to turn off the power.

Press

repeatedly.

( 28)

Lights up when Bluetooth connection is established.

( 13)

Flashes when the unit enters searching status.

ENGLISH

GETTING STARTED

Select the display language and cancel the demonstration

When you turn on the power for the first time (or

[YES], 5

), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME

KNOB”

1 Turn the volume knob to select

[SPA]

(Spanish), then press the knob.

[ENG]

is selected for the initial setup.

Then, the display shows: “CANCEL DEMO”

KNOB”.

[ENG]

2 Press the volume knob.

[YES]

is selected for the initial setup.

3 Press the volume knob again.

“DEMO OFF” appears.

Then, the display shows the selected crossover type: “2-WAY X ’ OVER” or “3-WAY X ’ OVER”

• To change the crossover type, see “Change the crossover type”.

[FACTORY RESET]

(English),

[RUS]

“PRESS” “VOLUME

(Russian) or

is set to

( 6)

Set the clock and date

Press the volume knob to enter

2 Turn the volume knob to select

To adjust the clock

3 Turn the volume knob to select

[FUNCTION] [CLOCK]

[CLOCK ADJUST]

, then press the knob.

4 Turn the volume knob to make the settings, then press the knob.

Hour

5 Turn the volume knob to select 6 Turn the volume knob to select

To set the date

7 Turn the volume knob to select 8 Turn the volume knob to select

9 Turn the volume knob to select

the knob.

Minute

[CLOCK FORMAT] [12H]

[24H]

[DATE FORMAT] [DD/MM/YY]

[DATE SET]

, then press the knob.

[MM/DD/YY]

, then press

10 Turn the volume knob to make the settings, then press the knob.

Day

Month Year or Month Day Year

11 Press and hold to exit.

To return to the previous setting item, press .

Set the initial settings

Press repeatedly to enter STANDBY.

2 Press the volume knob to enter 3 Turn the volume knob to select an item

knob.

[FUNCTION]

( 5)

, then press the

4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

GETTING STARTED

AUDIO CONTROL

SWITCH PREOUT

DISPLAY

EASY MENU

TUNER SETTING

PRESET TYPE

SYSTEM

KEY BEEP

SOURCE SELECT

SPOTIFY SRC

BUILT-IN AUX

(Not applicable if 3-way crossover is selected.)

REAR/SUBWOOFER

connected to the line out terminals on the rear (through an external amplifier).

When entering

: LCD DISPLAY zone illumination changes to white color. ;

OFF

: LCD DISPLAY zone illumination remains as

( 24)

•

KEY zone illumination changes to light blue color when you enter

[FUNCTION]

•

Refer to the illustration on page 23 for zone identification.

NORMAL

(FM1/FM2/FM3/MW/LW).; button, regardless of the selected band.

(Not applicable if 3-way crossover is selected.)

:Activates the keypress tone.;

:Enables SPOTIFY in source selection.;

:Enables AUX in source selection.;

Default:

: Selects whether rear speakers or a subwoofer are

( 34)

[FUNCTION]

, irregardless of the

:Memorizes one station for each preset button in each band

...

[COLOR SELECT]

[EASY MENU]

MIX

:Memorizes one station for each preset

OFF

:Deactivates.

OFF

:Disables.

OFF

:Disables.

setting.

( 11)

color.

P - OFF WAIT

CD READ

F/W UPDATE

UPDATE SYSTEM

F/W UP xxxx

FACTORY RESET YES

CLOCK

CLOCK DISPLAY

ENGLISH

РУССКИЙ

ESPANOL

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery.

20M

: 20minutes;

– – –

:Cancels

(For )

:Automatically distinguishes between audio file disc and music CD.;

:Forces to play as a music CD. No sound can be heard if an audio file

disc is played.

YES

:Starts upgrading the firmware.; NO:Cancels (upgrading is not activated). For details on how to update the firmware, visit <www.kenwood.com/cs/ce/>.

:Resets the settings to default (except the stored station).;

:Cancels

:The clock time is shown on the display even when the unit is

turned off.;

Select the display language for information if applicable. By default,

OFF

:Cancels.

[ENGLISH]

40M

: 40minutes;

is selected.

60M

[FUNCTION]

: 60minutes;

menu and music

ENGLISH

GETTING STARTED

Change the crossover type

Press repeatedly to enter STANDBY.

2 Press and hold number buttons 4 and 5 to enter crossover select.

The current crossover type appears.

3 Turn the volume knob to select “2WAY” or “3WAY”, then press the

knob.

4 Turn the volume knob to select “YES” or “NO”, then press the knob.

The selected crossover type appears.

• To cancel, press and hold

• To adjust the selected crossover settings,

( 21, 22)

RADIO

Caution

Select a crossover type according to how the speakers are connected.

( 33, 34)

If you select a wrong type:

• The speakers may damage.

• The output sound level may be extremely high or low.

ENGLISH

Search for a station

Press repeatedly to select RADIO.

2 Press repeatedly to select FM1/FM2/FM3/MW/LW. 3 Press S/T to search for a station.

• To change the searching method for S/T: Press

repeatedly.

AUTO1 : Automatically search for a station. AUTO2 : Search for a preset station. MANUAL : Manually search for a station.

• To store a station: Press and hold one of the number buttons (1to6).

• To select a stored station: Press one of the number buttons (1to6).

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item

knob.

[FUNCTION]

( 7)

, then press the

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

RADIO

Default:

TUNER SETTING

LOCAL SEEK

AUTO MEMORY

MONO SET

NEWS SET ON

REGIONAL ON

AF SET ON

TI ON

PTY SEARCH1 Turn the volume knob to select the available Program Type (see the

CLOCK

TIME SYNC

: Searches only stations with good reception. ;

•

Settings made are applicable only to the selected source/station. Once

you change the source/station, you need to make the settings again.

YES

:Automatically starts memorizing 6 stations with good reception.;

:Cancels.

•

Selectable only if

:Improves the FM reception, but the stereo effect may be lost.;

OFF

:Cancels.

: The unit will temporarily switch to News Programme if available. ;

OFF

:Cancels.

: Switches to another station only in the specific region using the “AF”

control.;

: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor.;

:Allows the unit to temporarily switch to Traffic Information if available (“TI” lights up).;

following), then press the knob.

Turn the volume knob to select the PTY language (

GERMAN

Press S/T to start searching.

: Synchronizes the unit’s time to the Radio Data System station time. ;

OFF

: Cancels.

[NORMAL]

OFF

:Cancels.

OFF

:Cancels.

), then press the knob.

is selected for

OFF

: Cancels.

[PRESET TYPE]. ( 5)

:Cancels.

ENGLISH/FRENCH

Available Program Type for

SPEECH

NEWS, AFFAIRS, INFO CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

MUSIC

POP M

(music),

CLASSICS, OTHER M OLDIES, FOLK M

The unit will search for the Program Type categorized under

[MUSIC]

if selected.

[LOCAL SEEK]/[MONO SET]/[NEWS SET]/[REGIONAL]/[AF SET]/[PTY SEARCH]

• selectable only when the band is FM1/FM2/FM3.

• If the volume is adjusted during reception of traffic information or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information or news bulletin is turned on.

(information),

ROCK M

(music),

(music)

[PTY SEARCH]

SPORT, EDUCATE, DRAMA

(music),

EASY M

JAZZ, COUNTRY, NATION M

(music),

LIGHT M

(music),

[SPEECH]

ENGLISH

CD/USB/iPod/ANDROID

Start playback

The source changes automatically and playback starts.

Label side

Eject disc

USB input terminal

ENGLISH

USB

CA-U1EX (max.: 500mA) (optional accessory)

iPod/iPhone

KCA-iP102/KCA-iP103 (optional

accessory) iPod/iPhone

ANDROID

USB cable

or accessory of the

(commercially available)

Selectable source:

•

: CD/USB/iPod USB/ANDROID

: USB/iPod USB/ANDROID

To On the faceplate

Playback/pause Press .

Reverse/Fast-forward

Select a track/file

Select a folder

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the

Press and hold S/T.

Press S/T.

Press J/K.

instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

For ANDROID: Applicable only when

For CD: Only for MP3/WMA/AAC files. This does not work for iPod/ANDROID.

[BROWSE MODE]

is selected.

( 9)

CD/USB/iPod/ANDROID

To On the faceplate

Repeat play

Random play

For iPod/ANDROID: Applicable only when

For CD: Only for MP3/WMA/AAC files.

Press repeatedly.

TRACK REPEAT/ALL REPEAT FILE REPEAT/FOLDER REPEAT/ALL REPEAT

FILE REPEAT/FOLDER REPEAT/REPEAT OFF

Press repeatedly.

DISC RANDOM/RANDOM OFF FOLDER RANDOM/RANDOM OFF

Press and hold

: Audio CD

: MP3/WMA/AAC/WAV/

FLAC file, iPod or ANDROID

to select

[MODE OFF]/[BROWSE MODE]

ALL RANDOM

Select control mode

While in iPod USB source, press 5 repeatedly.

MODE ON

: Control iPod using the iPod itself. However, you can still play/

MODE OFF

While in ANDROID source, press 5 repeatedly.

BROWSE MODE

HAND MODE

pause, file skip, fast-forward or reverse from this unit.

: Control iPod from this unit.

: Control Android device from this unit via KENWOOD MUSIC

PLAY application installed in the Android device.

: Control Android device using the Android device itself via

other media player applications installed in the Android device. However, you can still play/pause and file skip from this unit.

: MP3/WMA/AAC/

WAV/FLAC file

: iPod or ANDROID

is selected.

Select music drive

While in USB source, press 5 repeatedly.

Stored songs in the following drive will be played back.

• Selected internal or external memory of a smartphone (Mass Storage

Class).

• Selected drive of a multiple drives device.

Select a file from a folder/list

For iPod/ANDROID, applicable only when selected.

[MODE OFF]/[BROWSE MODE]

1 Press . 2 Turn the volume knob to select a folder/list, then press the knob. 3 Turn the volume knob to select a file, then press the knob.

Quick Search

If you have many files, you can search through them quickly.

Turn the volume knob quickly to browse through the list quickly.

Skip Search

Press S/T to search at a preset skip search ratio.

( 10, [SKIP SEARCH])

• Pressing and holding S/T searches at a 10% ratio.

Alphabet search

You can search for a file according to the first character.

For iPod USB source

(applicable only for CD, USB and ANDROID source)

(applicable only for iPod USB and ANDROID source)

1 Turn the volume knob quickly to enter character search. 2 Turn the volume knob to select the character.

• Select “ 3 Press S/T to move to the entry position.

” to search for a character other than AtoZ, 0to9.

• You can enter up to 3characters. 4 Press the volume knob to start searching.

ENGLISH

CD/USB/iPod/ANDROID

For ANDROID source

1 Press J/K to enter character search. 2 Turn the volume knob to select the character.

^A^: Upper case letters (A to Z) _A_: Lower case letters (a to z)

-0-: Numbers (0 to 9)

: Character other than AtoZ, 0to9

***

3 Press the volume knob to start searching.

• To return to the root folder/first file/top menu, press 5.

BT AUDIO source.)

• To return to the previous setting item, press .

• To cancel, press and hold

(Not applicable for

Listen to TuneIn Radio/TuneIn Radio Pro

While listening to TuneIn Radio or TuneIn Radio Pro, connect the iPod/ iPhone to the USB input terminal of the unit.

• The unit will output the sound from these applications.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via USB input terminal).

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

You can make the settings in the same way as connection via Bluetooth.

( 18)

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

Default:

USB

MUSIC DRIVE DRIVE CHANGE

automatically and playback starts. Repeat steps

SKIP SEARCH 0.5%/1%/5%/10%

the skip search ratio over the total files.

:The next drive (

to 3 to select the following drives.

[DRIVE 1]

[DRIVE 4]

: While listening to iPod USB or ANDROID source, selects

) is selected

ENGLISH

AUX

Preparation:

Select

[ON]

for

[BUILT-IN AUX]

Start listening

Connect a portable audio player (commercially available).

Auxiliary input jack

for

[SOURCE SELECT]. ( 5)

Portable audio player

Spotify

Preparation:

Install the latest version of the Spotify application on your device (iPhone/ iPod touch), then create an account and log in to Spotify.

• Select

[ON]

for

[SPOTIFY SRC]

Start listening

Open the Spotify application on your device.

2 Connect your device to the USB input terminal.

[SOURCE SELECT]. ( 5)

3.5mm stereo mini plug with “L” shaped connector (commercially available)

2 Press repeatedly to select AUX. 3 Turn on the portable audio player and start playback.

Set the AUX name

While listening to a portable audio player connected to the unit...

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select

[FUNCTION] [SYSTEM] [AUX NAME SET]

, then press the knob.

4 Turn the volume knob to select an item, then press the knob.

AUX

(default)/

DVD/PORTABLE/GAME/VIDEO/TV

5 Press and hold to exit.

To return to the previous setting item, press .

USB input terminal

KCA-iP102/KCA-iP103 (optional accessory) or accessory of the iPod/iPhone

3 Press repeatedly to select SPOTIFY.

Broadcast starts automatically.

To On the faceplate

Playback/pause Press . Skip a track

Thumbs up or thumbs down

Start radio Press and hold 5.

KCA-iP102 : 30-pin type, KCA-iP103 : Lightning type

Do not leave the cable inside the car when not using.

This feature is available for tracks in Radio only. If thumbs down is selected, the current track is skipped.

( 12)

Press S*

Press J/K.

/T.

ENGLISH

Spotify

To On the faceplate

Repeat play*

Random play*

Available for premium account users only.

Available for tracks in Playlists only.

Save favorite song information

While listening to the Radio on Spotify...

Press and hold the volume knob.

“SAVED” appears and the information is stored to “Your Music” or “Your Library” on your Spotify account.

To unsave, repeat the same procedure. “REMOVED” appears and the information is removed from “Your Music” or “Your Library” on your Spotify account.

Search for a song or station

Press .

2 Turn the volume knob to select a list type, then press the knob.

The list types displayed differ depending on the information sent

from Spotify.

3 Turn the volume knob to select the desired song or station. 4 Press the volume knob to confirm.

You can browse through the list quickly by turning the volume knob

quickly.

To cancel, press and hold

Press repeatedly.

REPEAT ALL/REPEAT ONE*4/

Press repeatedly.*

SHUFFLE ON/SHUFFLE OFF

REPEAT OFF

BLUETOOTH®

BLUETOOTH — Connection

Supported Bluetooth profiles

– Hands-Free Profile (HFP) – Advanced Audio Distribution Profile (A2DP) – Audio/Video Remote Control Profile (AVRCP) – Serial Port Profile (SPP) – Phonebook Access Profile (PBAP)

Supported Bluetooth codecs

– Sub Band Codec (SBC) – Advanced Audio Coding (AAC)

Connect the microphone

Rear panel

Microphone (supplied)

Microphone input jack

Adjust the microphone angle

Secure using cord clamps (not supplied) if necessary.

ENGLISH

BLUETOOTH®

Pair and connect a Bluetooth device for the first time

Press to turn on the unit.

2 Search and select this unit model name (DPX-5 /DPX-M3 ) on

the Bluetooth device.

“PAIRING”

KNOB” appears on the display.

“PASS XXXXXX” Device name “PRESS” “VOLUME

• For some Bluetooth devices, you may need to enter the Personal

Identification Number (PIN) code immediately after searching.

3 Press the volume knob to start pairing.

“PAIRING OK” appears when pairing is completed.

Once pairing is completed, Bluetooth connection is established automatically. “BT1” and/or “BT2” indicator on the faceplate lights up.

• This unit supports Secure Simple Pairing (SSP).

• Up to five devices can be registered (paired) in total.

• Once the pairing is completed, the Bluetooth device will remain registered in the unit even if you reset the unit. To delete the paired device,

• A maximum of two Bluetooth phones and one Bluetooth audio device

17, [DEVICE DELETE]

can be connected at any time. However, while in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

• Some Bluetooth devices may not automatically connect to the unit after pairing. Connect the device to the unit manually.

• Refer to the instruction manual of the Bluetooth device for more information.

( 18)

Auto Pairing

When you connect iPhone/iPod touch/Android device to the USB input terminal, pairing request (via Bluetooth) is automatically activated.

Press the volume knob to pair once you have confirmed the device name.

Automatic pairing request is activated only if: – Bluetooth function of the connected device is turned on. –

[AUTO PAIRING]

– KENWOOD MUSIC PLAY application is installed on the Android device

( 8)

and

[BROWSE MODE]

is set to

[ON]. ( 17)

is selected.

( 9)

ENGLISH

BLUETOOTH®

BLUETOOTH — Mobile phone

Receive a call

When there is an incoming call:

• The KEY zone illuminates in green color and flashes.

• The unit answers the call automatically if selected time.

During a call:

• The LCD DISPLAY zone illuminates according to the settings made for

[DISPLAY] ( 24)

• If you turn off the unit, the Bluetooth connection is disconnected.

( 15)

and the KEY zone illuminates in green color.

[AUTO ANSWER]

is set to a

The following operations may differ or not available depending on the connected phone.

To On the faceplate

First incoming call...

Answer a call

Reject a call

End a call

While talking on the first incoming call...

Answer another incoming call and hold the current call

Reject another incoming call

While having two active calls...

End current call and activate held call

Swap between the current call and held call

Adjust the phone volume

[00]

[35]

(Default:

Switch between hands-free and private talk modes

[15]

Press of the number buttons (1 to 6).

Press

Press .

Press

Turn the volume knob during a call.

)

• This adjustment will not affect the volume of the other sources.

Press

• Operations may vary according to the connected Bluetooth device.

or the volume knob or one

during a call.

ENGLISH

BLUETOOTH®

Improve the voice quality

While talking on the phone...

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

MIC GAIN LEVEL –10

NR LEVEL LEVEL –5

ECHO CANCEL LEVEL –5

to

microphone increases as the number increased.

to

the least noise is being heard during a phone conversation.

to

time until the least echo is being heard during a phone conversation.

Make the settings for receiving a call

Press to enter Bluetooth mode.

1 2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

[FUNCTION]

LEVEL +10(LEVEL –4

LEVEL +5(LEVEL 0

Default:

): The sensitivity of the

):Adjust the noise reduction level until

):Adjust the echo cancellation delay

SETTINGS

AUTO ANSWER

BATT/SIGNAL* AUTO

Functionality depends on the type of the phone used.

to30:The unit answers incoming call automatically in the selected time

(in seconds).;

a Bluetooth device and the Bluetooth device is connected.;

OFF

:Cancels.

:Shows the strength of the battery and signal when the unit detects

:Cancels.

Make a call

You can make a call from the call history, phonebook, or dialing the number. Call by voice is also possible if your mobile phone has the feature.

1 Press to enter Bluetooth mode.

“(First device name)” appears.

• If two Bluetooth phones are connected, press again to switch

to another phone.

“(Second device name)” appears. 2 Turn the volume knob to select an item (see the following table),

then press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

CALL HISTORY

(Applicable only if the phone supports PBAP.)

Press the volume knob to select a name or a phone number.

• “INCOMING”, “OUTGOING”, or “MISSED” is shown on the lower part of the display to indicate the previous call status.

• Press

DISP

• “NO DATA” appears if there is no recorded call history.

Press the volume knob to call.

to change the display category (NUMBER or NAME).

Default:

ENGLISH

BLUETOOTH®

PHONE BOOK

NUMBER DIAL1 Turn the volume knob to select a number (0 to 9) or character

VOICE

BATT LOW

NO SIGNAL/LOW/MID/MAX*:Shows the strength of the current received signal.

Functionality depends on the type of the phone used.

(Applicable only if the phone supports PBAP.)

Turn the volume knob quickly to enter alphabet search mode (if the

phonebook contains many contacts).

The first menu (ABCDEFGHIJK) appears.

• To go to the other menu (LMNOPQRSTUV or WXYZ1

J/K

• To select the desired first letter, turn the volume knob or press

Select “1” to search with numbers and select “

2 3

•

The phonebook of the connected phone is automatically transferred to

•

Contacts are categorized as: HOME, OFFICE, MOBILE, OTHER, GENERAL.

•

This unit can display only non-accent letters. (Accent letters such as “Ú”

Speak the name of the contact you want to call or the voice command to control the phone functions.

MID/FULL*:Shows the strength of the battery.

S/T

symbols. Turn the volume knob to select a name, then press the knob. Turn the volume knob to select a phone number, then press the knob

to call.

the unit when pairing.

is shown as “U”.)

(

, #, +). Press

Repeat steps

Press the volume knob to call.

, then press the knob.

S/T

to move the entry position.

and 2 until you finish entering the phone number.

( Make a call using voice recognition)

” to search with

), press

Make a call using voice recognition

Press and hold to activate the voice recognition of the

connected phone.

2 Speak the name of the contact you want to call or the voice

command to control the phone functions.

• Supported Voice Recognition features vary for each phone. Refer to the instruction manual of the connected phone for details.

• This unit also supports the intelligent personal assistant function of iPhone.

Settings in memory

Store a contact in memory

You can store up to 6 contacts into the number buttons (1 to 6).

1 Press to enter Bluetooth mode. 2 Turn the volume knob to select

[NUMBER DIAL]

, then press the knob.

[CALL HISTORY], [PHONE BOOK]

, or

3 Turn the volume knob to select a contact or enter a phone number.

If a contact is selected, press the volume knob to show the phone

number.

4 Press and hold one of the number buttons (1 to 6).

“STORED” appears when the contact is stored. To erase a contact from the preset memory, select

and store a blank number.

[NUMBER DIAL]

in step 2

Make a call from memory

Press to enter Bluetooth mode.

1 2 Press one of the number buttons (1 to 6). 3 Press the volume knob to call.

“NO MEMORY” appears if there is no contacts stored.

ENGLISH

BLUETOOTH®

Other settings

Press the volume knob to enter

[FUNCTION]

2 Turn the volume knob to select an item (see the following table), then press the

knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

Default:

BT MODE

PHONE SELECT

AUDIO SELECT

DEVICE DELETE

PIN CODE EDIT (0000)

RECONNECT ON

AUTO PAIRING ON

INITIALIZE YES

Selects the phone or audio device to connect or disconnect. “

” appears in front of the device name when connected.

“

” appears in front of the current playback audio device.

•

You can only connect a maximum of two Bluetooth phones and one Bluetooth audio

device at any time.

Turn the volume knob to select a device to delete, then press the knob.

Turn the volume knob to select

Changes the PIN code (up to 6 digits).

Turn the volume knob to select a number.

Press S/T to move the entry position.

Repeat steps

Press the volume knob to confirm.

:The unit automatically reconnect when the last connected Bluetooth device is within

range.;

:The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Android device) when it is connected through USB input terminal.Depending on the operating system of the connected device, this function may not work. ;

:Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.).;

:Cancels.

and 2 until you finish entering the PIN code.

OFF

:Cancels.

[YES]

[NO]

, then press the knob.

OFF

:Cancels.

Bluetooth test mode

You can check the connectivity of the supported profile between the Bluetooth device and the unit.

• Make sure there is no Bluetooth device paired.

1 Press and hold .

“PLEASE PAIR YOUR PHONE PIN 0000” appears.

2 Search and select this unit model name (DPX-5 /

DPX-M3

) on the Bluetooth device.

3 Operate the Bluetooth device to confirm pairing.

“TESTING” flashes on the display.

The connectivity result (OK or NG) appears after the test.

PAIRING: Pairing status HF CNT: Hands-Free Profile (HFP) compatibility AUD CNT: Advanced Audio Distribution Profile (A2DP)

PB DL: Phonebook Access profile (PBAP) compatibility

To cancel test mode, press and hold unit.

compatibility

to turn off the

ENGLISH

BLUETOOTH®

BLUETOOTH — Audio

While in BT AUDIO source, you can connect to five Bluetooth audio devices and switch between these five devices.

Audio player via Bluetooth

Press to select BTAUDIO.

2 Operate the Bluetooth audio player to start playback.

To On the faceplate

Playback/pause Press . Select group or folder

Reverse/Forward skip

Reverse/Fast-forward

Repeat play Press

Random play Press and hold to select

Select a file from a folder/list

Press J/K.

Press S/T.

Press and hold S/T.

repeatedly.

ALL REPEAT, FILE REPEAT, REPEAT OFF

• Press

Refer to “Select a file from a folder/list” on page 9.

to select

RANDOM OFF

ALL RANDOM

To On the faceplate

Switch between connected Bluetooth audio devices

Pressing the “Play” key on the connected device itself also causes switching of sound output

from the device.

Operations and display indications may differ according to their availability on the connected device.

Press 5.

Settings to use KENWOOD Remote application

KENWOOD Remote application is designed to control the KENWOOD car receiver’s operations from the iPhone/iPod (via Bluetooth or via USB input terminal) or Android smartphone (via Bluetooth).

Preparation:

Install the latest version of KENWOOD Remote application on your device before connecting. For more information, visit <www.kenwood.com/cs/ce/>.

1 Press the volume knob to enter 2 Turn the volume knob to select an item

knob.

[FUNCTION]

( 19)

, then press the

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

ENGLISH

BLUETOOTH®

REMOTE APP

SELECT

IOS YES

ANDROID YES

ANDROID LIST

STATUS

Displayed only when

Select the device (IOS or ANDROID) to use the application.

via USB input terminal.; If IOS is selected, select iPod BT source (or iPod USB if your iPhone/iPod is connected via USB input terminal) to activate the application.

•

The connectivity of the application will be interrupted or disconnected if:

– You change from iPod BT source to any playback source connected via

– You change from iPod USB source to iPod BT source.

*:Selects the Android smartphone to use from the list.

Shows the status of the selected device.

IOS CONNECTED

connected via Bluetooth or USB input terminal.

IOS NOT CONNECTED ANDROID CONNECTED

Android smartphone connected via Bluetooth.

ANDROID NOT CONNECTED

application.

Default:

:Selects iPhone/iPod to use the application via Bluetooth or connected

the USB input terminal.

:Selects Android smartphone to use the application via Bluetooth.;

: Cancels.

[ANDROID]

:Cancels.

: You are able to use the application using the iPhone/iPod

: No IOS device is connected to use the application.

: You are able to use the application using the

: No Android device is connected to use the

[SELECT]

is set to

[YES]

Listen to iPhone/iPod via Bluetooth

You can listen to the songs on the iPhone/iPod via Bluetooth on this unit.

Press repeatedly to select iPodBT.

• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB input terminal.

• If you plug in an iPhone/iPod to the USB input terminal while listening to iPodBT source, the source automatically change to iPod USB. Press

to select iPodBT if the device is still connected via Bluetooth.

( 8)

Internet radio via Bluetooth

You can listen to Spotify on the iPhone/iPod/Android device via Bluetooth on this unit.

• Make sure the USB input terminal is not connected to any device.

Listen to Spotify

Preparation:

Select

[ON]

for

[SPOTIFY SRC]

[SOURCE SELECT]. ( 5)

1 Open the Spotify application on your device. 2 Connect your device via Bluetooth connection.

( 13)

3 Press repeatedly to select SPOTIFY (for iPhone/iPod) or

SPOTIFY BT (for Android device).

The source switches and broadcast starts automatically.

• You can operate Spotify in the same way as Spotify via USB input terminal.

( 11)

ENGLISH

AUDIO SETTINGS

While listening to any source...

1 Press the volume knob to enter 2 Turn the volume knob to select an item (see the following

table), then press the knob.

3 Repeat step 2 until the desired item is selected or activated. 4 Press and hold to exit.

To return to the previous setting item, press .

AUDIO CONTROL

SUB-W LEVEL

MANUAL EQ

62.5HZ LEVEL LEVEL –9

100HZ/160HZ/250HZ/ 400HZ/630HZ/1KHZ/

1.6KHZ/2.5KHZ/4KHZ/

6.3KHZ/10KHZ/16KHZ

Q FACTOR 1.35/1.50/2.00

PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ

BASS BOOST LEVEL1/LEVEL2/LEVEL3/LEVEL4/LEVEL5

LEVEL –50

subwoofer output level.

The sound elements (frequency level, tone level, Q factor) are preset into each selection.

BASS EXTEND

LEVEL –9

to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

POWERFUL/USER

to the music genre. (Select made in

your preferred bass boost level.;

[FUNCTION]

LEVEL +10 (LEVEL 0

the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

:Turns on the extended bass.;

OFF

:Cancels.

LEVEL +9 (LEVEL 0

:Adjust the quality factor.

[MANUAL EQ]

): Adjusts the

LEVEL +9 (LEVEL 0

):Adjusts the level

: Selects a preset equalizer suitable

[USER]

to use the settings

OFF

:Cancels.

Default:

): Adjusts

:Selects

LOUDNESS LEVEL1/LEVEL2

SUBWOOFER SET ON

FADER

BALANCE L15

VOLUME OFFSET LEVEL –15

SOUND EFFECT

SOUND RECNSTR

(Sound reconstruction)

SPACE ENHANCE

SND REALIZER LEVEL1/LEVEL2/LEVEL3

STAGE EQ LOW/MIDDLE/HIGH

DRIVE EQ ON

SPEAKER SIZE

X’OVER

DTA SETTINGS

CAR SETTINGS

•

For 2-way crossover:

set to

[SUBWOOFER]. ( 5)

• [SUB-W LEVEL]

produce a well-balanced sound at a low volume level.;

(Not applicable if 3-way crossover is selected.)

R15

source. (Before adjustment, select the source you want to adjust.)

(Not applicable for RADIO source and AUX source.)

and restoring the rise-time of the waveform that are lost in audio data compression.;

(Not applicable for RADIO source.)

SMALL/MEDIUM/LARGE

OFF

speakers.;

running noise of the tyres.;

Depending on the crossover type you have selected or 3-way crossover setting items will be shown. By default, 2-way crossover type is selected.

For settings,

[SUB-W LEVEL]/[SUBWOOFER SET]

is selectable only if

:Selects your preferred low and high frequencies boost to

:Turns on the subwoofer output.;

F15 (0

):Adjusts the rear and front speaker output balance.

R15 (0

):Adjusts the left and right speaker output balance.

LEVEL +6 (LEVEL 0

:Creates realistic sound by compensating the high-frequency components

OFF

:Cancels.

:Virtually adjust the sound position heard from the

OFF

:Cancels.

: Boosts the frequency to reduce the noise heard from outside the car or

22, 23, Digital Time Alignment settings

[SUBWOOFER SET]

OFF

:Cancels.

):Preset the initial volume level of each

:Virtually enhances the sound space.;

:Virtually makes the sound more realistic.;

OFF

:Cancels.

is selectable only if

is set to

[ON]

( 6)

( 21, 22)

OFF

:Cancels.

OFF

, 2-way crossover

[SWITCH PREOUT]

:Cancels.

ENGLISH

AUDIO SETTINGS

Crossover settings

Below are the available setting items for 2-way crossover and 3-way crossover.

SPEAKER SIZE

Selects according to the connected speaker size for optimum performance.

•

The frequency and slope settings are automatically set for the crossover of the selected speaker.

•

When 2-way crossover is selected, if for

[TWEETER]

[SPEAKER SIZE]

[FRONT], [REAR]

, the

[X ‘ OVER]

setting of the speaker is not

and

[NONE]

is selected

[SUBWOOFER]

for

available.

• When 3-way crossover is selected, if for

[WOOFER]

[SPEAKER SIZE]

is not available.

, the

[NONE]

[X’OVER]

is selected

setting of

X ‘ OVER

• [FRQ]

[F - HPF FRQ]/[R - HPF FRQ]/[SW LPF FRQ]/[HPF FRQ]

[LPF FRQ]

: Adjusts the crossover frequency for the

selected speakers (high pass filter or low pass filter).

[THROUGH]

is selected, all signals are sent to the

selected speakers.

•

[F - HPF SLOPE]/[R - HPF SLOPE]/[SW LPF SLOPE]/[HPF SLOPE] [LPF SLOPE]/[SLOPE]:

Selectable only if a setting other than

Adjusts the crossover slope.

[THROUGH]

selected for the crossover frequency.

• [SW LPF PHASE]/[PHASE]:

Selects the phase of the speaker

output to be in line with the other speaker output.

• [GAIN LEFT]/[GAIN RIGHT]/[F - HPF GAIN]/[R - HPF GAIN] [SW LPF GAIN]/[GAIN]:

Adjusts the output volume of the

selected speaker.

2-way crossover setting items

SPEAKER SIZE

FRONT SIZE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8 6×9/7×10

TWEETER

SMALL/MIDDLE/LARGE/NONE

(not connected)

REAR 8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9/7×10/NONE

(not connected)

SUBWOOFER

16CM/20CM/25CM/30CM/38CM OVER/NONE

(not connected)

X ' OVER

TWEETER FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ/10KHZ

12.5KHZ

GAIN LEFT

GAIN RIGHT

FRONT HPF F - HPF FRQ

–8

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ 150HZ/180HZ/220HZ/250HZ/THROUGH

F - HPF SLOPE

F - HPF GAIN

–6DB/–12DB/–18DB/–24DB

–8

REAR HPF R - HPF FRQ

R - HPF SLOPE

FRONT HPF

settings above.)

(Refer

R - HPF GAIN

SUBWOOFER

LPF

Selectable only when

[ON]. ( 20)

SW LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ/120HZ

150HZ/180HZ/220HZ/250HZ/THROUGH

SW LPF SLOPE

SW LPF PHASE

SW LPF GAIN –8

[SWITCH PREOUT]

–6DB/–12DB/–18DB/–24DB

REVERSE

(180°)/

NORMAL

(0°)

is set to

[SUBWOOFER] ( 5)

and

[SUBWOOFER SET]

ENGLISH

is set to

AUDIO SETTINGS

3-way crossover setting items

SPEAKER SIZE

TWEETER

MID RANGE

WOOFER

SMALL/MIDDLE/LARGE

8CM/10CM/12CM/13CM/16CM/17CM/18CM/4×6/5×7/6×8/6×9

16CM/20CM/25CM/30CM/38CM OVER/NONE

X ' OVER

TWEETER HPF FRQ

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ 10KHZ/12.5KHZ

SLOPE

PHASE

GAIN –8

MID RANGE HPF FRQ

–6DB/–12DB

REVERSE

30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ 120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

HPF SLOPE

LPF FRQ

–6DB/–12DB

1KHZ/1.6KHZ/2.5KHZ/4KHZ/5KHZ/6.3KHZ/8KHZ 10KHZ/12.5KHZ/THROUGH

WOOFER

LPF SLOPE

PHASE

GAIN –8

LPF FRQ 30HZ/40HZ/50HZ/60HZ/70HZ/80HZ/90HZ/100HZ

–6DB/–12DB

REVERSE

120HZ/150HZ/180HZ/220HZ/250HZ/THROUGH

Selectable only when

SLOPE

PHASE

GAIN –8

–6DB/–12DB

REVERSE

[SUBWOOFER SET]

(180°)/

is set to

NORMAL

(0°)

NORMAL

(0°)

NORMAL

(0°)

[ON]. ( 20)

(not connected)

Digital Time Alignment settings

Digital Time Alignment sets the delay time of the speaker output to create a more suitable environment for your vehicle.

• For more information,

23, Determining the value for [DISTANCE] and

[GAIN] of [DTA SETTINGS].

DTA SETTINGS

POSITION

Selects your listening position (reference point).

ALL

:Not compensating;

FRONT LEFT

:Front left seat;

• [FRONT ALL]

FRONT RIGHT:

FRONT ALL

is displayed only when

Front right seat;

[2-WAY X’OVER]

( 6)

DISTANCE 0CM

GAIN –8DB

610CM

:Fine adjust the distance to compensate.

(Before making an adjustment, select the speaker you want to adjust.)

0DB

:Fine adjust the output volume of the selected speaker.

(Before making an adjustment, select the speaker you want to adjust.)

CAR SETTINGS

DTA RESET YES

:Resets the settings (

[POSITION]

to default.; NO:Cancels.

[DISTANCE]

and

Identify your car type and rear speaker location in order to make the adjustment for

[DTA SETTINGS]

CAR TYPE COMPACT/FULL SIZE CAR/WAGON/MINIVAN/SUV

R - SP LOCATION

MINIVAN(LONG) OFF:

Not compensating.

Selects the location of the rear speakers in your vehicle to calculate the

:Selects the type of vehicle.;

furthest distance from the listening position selected (reference point).

• DOOR/REAR DECK

:Selectable only when

[OFF], [COMPACT], [FULL SIZE CAR], [WAGON]

• 2ND ROW/3RD ROW

[MINIVAN]

:Selectable only when

[MINIVAN(LONG)]

:Front seat

[GAIN]

[CAR TYPE]

is selected.

) of the selected

is selected as

[SUV]

is selected

ENGLISH

AUDIO SETTINGS

•

Before making an adjustment for

speaker you want to adjust: When 2-way crossover is selected:

FRONT LEFT/FRONT RIGHT/REAR LEFT/REAR RIGHT/SUBWOOFER

– You can only select

than

[NONE]

is selected for

When 3-way crossover is selected:

TWEETER LEFT/TWEETER RIGHT/MID LEFT/MID RIGHT/WOOFER

– You can only select

[SPEAKER SIZE]. ( 22)

• [R - SP LOCATION]

– 2-way crossover is selected. – A setting other than

Determining the value for [DISTANCE] and [GAIN] of [DTA SETTINGS]

[DISTANCE]

[REAR LEFT], [REAR RIGHT]

[REAR]

[WOOFER]

if a setting other than

[CAR SETTINGS]

( 6)

[NONE]

is selected for

and

[SUBWOOFER]

is selectable only if:

[REAR]

If you specify the distance from the center of the currently set listening position to every speaker, the delay time will be automatically computed and set.

Determine the center of the currently set

listening position as the reference point.

Measure the distances from the reference

point to the speakers.

Calculate the differences between the

distance of the furthest speaker (rear speaker) and other speakers.

Set the

individual speakers.

Adjust

Example: When listening position

[GAIN]

[DTA SETTINGS]

and

[SUBWOOFER]

[SPEAKER SIZE]. ( 21)

[NONE]

is selected for

[SPEAKER SIZE]. ( 21)

[DISTANCE]

[GAIN]

calculated in step 3 for

for individual speakers.

[FRONT ALL]

, select the

if a setting other

[WOOFER]

is selected as the

DISPLAY SETTINGS

Zone identification for color and brightness settings

Set the dimmer

Press and hold DISP to turn on or off the dimmer.

• If you have set and hold this button.

Other settings

Press the volume knob to enter

2 Turn the volume knob to select an item

knob.

3 Repeat step 2 until the desired item is selected/activated or follow

the instructions stated on the selected item.

4 Press and hold to exit.

To return to the previous setting item, press .

[DIMMER TIME] ( 24)

, it will be canceled once you press

[FUNCTION]

( 24)

, then press the

ENGLISH

DISPLAY SETTINGS

Default:

DISPLAY

COLOR SELECT

DIMMER

BRIGHTNESS1 Select a zone. (See the illustration on page 23.)

TEXT SCROLL AUTO/ONCE

Preset colors:

BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1 GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2 ORANGERED

Select color for

Select a zone. (See the illustration on page 23.)

Select a color for the selected zone.

To make your own color, select will be stored in

Press the volume knob to enter the detailed color adjustment.

Press S/T to select the color (R/G/B) to adjust.

Turn the volume knob to adjust the level (0 to 9), then press the knob.

Dim the illumination.

ON DIMMER TIME

Turn the volume knob to adjust the

(Default:

2 0

or scroll only once.;

RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1

ALL ZONE, LCD DISPLAY

INITIAL COLOR/VARIABLE SCAN/CUSTOM R/G/B

[CUSTOM R/G/B]

:Dimmer is turned on.;

[ON]: 18:00; [OFF]: 6:00

to 31: Select your preferred brightness level for the selected zone.

:Select whether to scroll the display information automatically,

OFF

:Set the dimmer on and off time.

OFF

:Cancels.

and

[CUSTOM R/G/B]

:Cancels.

[ON]

time, then press the knob.

[OFF]

)

KEY

separately.

/preset colors*

. The color you have made

time, then press the knob.

TROUBLESHOOTING

Symptom Remedy

Sound cannot be heard.

“MISWIRING CHECK WIRING THEN PWR ON” appears.

General

“PROTECTING SEND SERVICE” appears.

The unit does not work at all. Reset the unit.

•

Radio reception is poor.

•

Static noise while listening

Radio

to the radio.

Disc cannot be ejected.

Noise is generated. Skip to another track or change the disc.

Tracks do not play back as you intended them to play.

“READING” keeps flashing. Do not use too many hierarchical levels or folders.

Elapsed playing time is not

correct.

CD/USB/iPod

“LOADING” appears when you enter search mode by pressing

Correct characters are not displayed (e.g. album name).

•

Adjust the volume to the optimum level.

•

Check the cords and connections.

Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again.

Send the unit to the nearest service center.

( 3)

Connect the antenna firmly.

Press and hold M to forcibly eject the disc. Be careful not to drop the disc when it is ejected. If this does not solve the problem, reset the unit.

Playback order is determined when files are recorded.

This is caused by how the tracks are recorded.

This unit is still preparing the iPod/iPhone music list. It may take some time to load, try again later.

•

This unit can only display uppercase letters,

numbers, and a limited number of symbols.

•

Depending on the display language you have

selected

( 5)

displayed correctly.

, some characters may not be

( 3)

ENGLISH

TROUBLESHOOTING

Symptom Remedy

“NA FILE” Make sure the disc contains supported audio files.

“NO DISC” Insert a playable disc into the loading slot.

“TOC ERROR” Make sure the disc is clean and inserted properly.

“PLEASE EJECT” Reset the unit. If this does not solve the problem, consult

“NO DEVICE” Connect a USB device, and change the source to USB again.

“COPY PRO” A copy-protected file is played.

“UNSUPPORTED DEVICE”

“UNRESPONSIVE DEVICE” Make sure the device is not malfunction and reattach the

CD/USB/iPod

“USB HUB IS NOT SUPPORTED”

•

The source does not

change to “USB” when you connect a USB device while listening to another source.

•

“USB ERROR” appears

“NO MUSIC” Connect a USB device that contains playable audio files.

“iPod ERROR”

( 27)

your nearest service center.

•

Check whether the connected device is compatible with

this unit and ensure the file systems are in supported formats.

( 27)

•

Reattach the device.

device.

This unit cannot support a USB device connected via a USB hub.

The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.

•

Reconnect the iPod.

•

Reset the iPod.

Symptom Remedy

•

Sound cannot be heard

during playback.

•

Sound output only from

the Android device.

Cannot playback at

[BROWSE MODE]

ANDROID

“NO DEVICE” or “READING” keeps flashing.

Playback is intermittent or sound skips.

“ANDROID ERROR”/ “NADEVICE”

•

Reconnect the Android device.

•

If in

application on the Android device and start playback.

•

If in

application or use another media player application.

•

Restart the Android device.

•

If this does not solve the problem, the connected

Android device is unable to route the audio signal to unit.

•

Make sure KENWOOD MUSIC PLAY APP is installed on

the Android device.

•

Reconnect the Android device and select the

appropriate control mode.

•

If this does not solve the problem, the connected

Android device does not support

( 28)

•

Switch off the developer options on the Android

device.

•

Reconnect the Android device.

•

If this does not solve the problem, the connected

Android device does not support

( 28)

Turn off the power saving mode on the Android device.

•

Reconnect the Android device.

•

Restart the Android device.

[HAND MODE]

( 28)

, launch any media player

, relaunch the current media player

( 8)

[BROWSE MODE]

ENGLISH

TROUBLESHOOTING

Symptom Remedy

“DISCONNECTED” USB is disconnected from the head unit. Please make sure

“CONNECTING”

Spotify

“CHECK APP” The Spotify application is not connected properly, or user is

No Bluetooth device is detected.

Bluetooth pairing cannot be made.

Echo or noise is heard during a phone conversation.

Phone sound quality

Bluetooth®

is poor.

Voice calling method is not successful.

the device is connected properly through USB.

•

Connected via USB input terminal: The device is

connecting to the head unit. Please wait.

•

Connected via Bluetooth: The Bluetooth is disconnected.

Please check Bluetooth connection and make sure both the device and the unit are paired and connected.

not login. End the Spotify application and restart, then login to your Spotify account.

•

Search from the Bluetooth device again.

•

Reset the unit.

•

Make sure you have entered the same PIN code to both the

unit and Bluetooth device.

•

Delete pairing information from both the unit and the

Bluetooth device, then perform pairing again.

•

Adjust the microphone unit’s position.

•

Check the

•

Reduce the distance between the unit and the Bluetooth

device.

•

Move the car to a place where you can get a better signal

reception.

•

Use voice calling method in a more quiet environment.

•

Reduce the distance from the microphone when you speak

the name.

•

Make sure the same voice as the registered voice tag is

used.

( 3)

[ECHO CANCEL]

setting.

( 15)

( 12)

( 13)

Symptom Remedy

Sound is being interrupted or skipped during playback of a Bluetooth audio player.

The connected Bluetooth audio player cannot be controlled.

“DEVICE FULL” The number of registered devices has reached its limit. Retry

“N/A VOICE TAG” Make sure the same voice as the registered voice tag is used.

Bluetooth®

“NOT SUPPORT” The connected phone does not support Voice Recognition

“NO ENTRY”/“NO PAIR” There is no registered device connected/found via Bluetooth.

“ERROR” Try the operation again. If “ERROR” appears again, check if

“NO INFO”/“NO DATA” Bluetooth device cannot get the contact information.

“HF ERROR XX”/ “BT ERROR”

“SWITCHING NG” The connected phones might not support phone switching

•

Reduce the distance between the unit and the Bluetooth

audio player.

•

Turn off, then turn on the unit and try to connect again.

•

Other Bluetooth devices might be trying to connect to the

unit.

•

Check whether the connected Bluetooth audio player

supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.)

•

Disconnect and connect the Bluetooth player again.

after deleting an unnecessary device.

( 17, DEVICE DELETE)

feature or phonebook transfer.

the device supports the function you have tried.

Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center.

feature.

ENGLISH

+ 146 hidden pages