Kenwood DNX 715 WDAB, DNX 7150 DAB, DNX 4150 BT, DNX 4150 DAB, DNX 4150 BTR Instruction Manual
Page 1
DNX7150DAB
Check the latest edition
DNX715WDAB
DNX4150DAB
DNX4150BT
DNX4150BTR
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the
modified pages.
http://manual.kenwood.com/edition/im386/
IM386_Ref_E_En_02 (E/Q)© 2014 JVC KENWOOD Corporation
Page 2
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM.
In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPod USB
Disc Media
SD card aha App
Music CD
VCD
DVD VIDEO
AUPEO!
Tuner DAB
BT Audio
1
Page 3
Contents
Before Use 4
2 WARNING _______________________ 4
How to Read this Manual 5
Basic Operations 6
Functions of the Buttons
on the Front Panel __________________ 6
Turning on the Unit _________________ 12
How to Play Media __________________ 15
Detaching The Front Panel
(DNX7150DAB) _____________________ 18
Operating with the HOME Screen ______ 19
Common Operations ________________ 21
Navigation Operation ________________ 23
DVD/Video CD (VCD)
Operation 26
DVD/VCD Basic Operation ____________ 26
DVD Disc Menu Operation ____________ 29
Zoom Control For DVD And VCD _______ 30
DVD Setup ________________________ 32
CD/Audio and Visual Files/iPod/
App Operation 36
Music/Video/Picture Basic Operation ___ 36
Search Operation ___________________ 42
Movie Control ______________________ 45
Aha Operation _____________________ 46
AUPEO! Operation __________________ 49
Apps Operation ____________________ 51
USB/SD/iPod/App/DivX Setup _________ 52
Radio Operation 58
Radio Basic Operation _______________ 58
Digital Radio Basic Operation _________ 60
Memory Operation __________________ 62
Selecting Operation _________________ 63
Traffic Information __________________ 64
Replay (Digital Radio only) ____________ 65
Tuner Setup _______________________ 66
Digital Radio Setup __________________ 67
Bluetooth Control 70
Registering And Connecting
Bluetooth Unit _____________________ 70
Playing Bluetooth Audio Device _______ 74
Using Hands-Free Unit _______________ 75
Hands-Free Setup ___________________ 78
Setting Up 80
Monitor Screen Setup _______________ 80
View Camera Control ________________ 81
System Setup ______________________ 81
Display Setup ______________________ 86
Navigation Setup ___________________ 89
Camera Setup ______________________ 90
Software Information ________________ 91
AV Input Setup _____________________ 92
AV Output Interface Setup ____________ 93
Controlling Audio 94
Setting Audio ______________________ 94
Controlling General Audio ____________ 98
Equalizer Control ___________________ 99
Zone Control _______________________ 101
Sound Effect _______________________ 102
Listening Position ___________________ 104
22
Page 4
Remote control 106
Battery Installation __________________ 106
Functions of the Remote control Buttons 107
Troubleshooting 110
Problems and Solutions ______________ 110
Error Messages _____________________ 111
Resetting the Unit __________________ 113
Appendix 114
Playable Media and Files _____________ 114
Status Bar Indicator Items ____________ 118
Region Codes in the World ____________ 120
DVD Language Codes _______________ 121
Specifications ______________________ 122
About this Unit _____________________ 125
3
Page 5
Return to the Top page
Before Use
Before Use
2 WARNING
To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or
leave any metallic objects (such as coins or
metal tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any
extended period.
• If you experience problems during
installation, consult your Kenwood dealer.
Precautions on using this unit
• When you purchase optional accessories,
check with your Kenwood dealer to make
sure that they work with your model and in
your area.
• You can select language to display menus,
audio file tags, etc. See Language setup
(P. 83).
• The Radio Data System or Radio Broadcast
Data System feature won’t work where
the service is not supported by any
broadcasting station.
Protecting the monitor
Lens fogging
When you turn on the car heater in cold
weather, dew or condensation may form
on the lens in the disc player of the unit.
Called lens fogging, this condensation on
the lens may not allow discs to play. In such
a situation, remove the disc and wait for the
condensation to evaporate. If the unit still
does not operate normally after a while,
consult your Kenwood dealer.
Precautions on handling discs
• Do not touch the recording surface of the
disc.
• Do not stick tape etc. on the disc, or use a
disc with tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull
them out horizontally.
• If the disc center hole or outside rim has
burrs, use the disc only after removing the
burrs with a ballpoint pen etc.
• Discs that are not round cannot be used.
To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.
Cleaning the unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe it again with a clean soft
dry cloth.
¤
• Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erase screened print.
44
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording
surface or discs that are dirty cannot be
used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which
do not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see
your writing software, and your recorder
instruction manual.)
Page 6
How to Read this Manual
Return to the Top page
How To Read This Manual
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Search Operation
You can search music, video or picture files
by the following operations.
NOTE
• If you use a remote control, you can jump directly
to the desired track/file with entering the track/
folder/file number, play time, etc. For details, see
Direct search mode (P.119).
List search
You can search tracks, folders, and files
according to hierarchy.
1 Touch [ ].
The search type screen appears.
2 Touch desired search way.
List Control screen appears.
3 Touch the desired folder.
Link header
You can refer each section or top page
with one-click.
Operation title
Introduces the function.
NOTE
Introduces some tips, notes, etc.
Reference mark
Displayed in blue notes.
With one-click, you can jump to the
article related to the current section.
Operation procedure
Explains necessary procedures to
achieve the operation.
< >: Indicates the name of panel
buttons.
[ ]: Indicates the name of touch
keys.
4 Touch desired item from the content
list.
Playback starts.
Other search
When you want to narrow the list down,
there are other search ways.
This function is not available when music CD
is the current source.
3030
Screen shot
Shows some screen shots displayed during
operation for reference.
The area or keys to touch are surrounded
with a red frame.
NOTE
• The screens and panels shown in this
manual are examples used to provide clear
explanations of the operations.
For this reason, they may be different from the
actual screens or panels used, or some display
patterns may be different.
5
Page 7
Return to the Top page
13456
7
2
Basic Operations
Basic Operations
Functions of the Buttons on the Front Panel
DNX7150DAB
8
9
HOME
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX7150DAB:
If above icon is showed, read the article applicable to the unit you use.
How to insert an SD Card
1) Press 7 <0> button for 1 second.
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
NOTE
• When detaching a part of the front panel, detach it
toward the front side as shown in the diagram right. If it
is detached upward, the front panel will be broken.
66
Labelled
side
0
Page 8
Number Name Motion
1
2
3
4
5
6
7
8
9
fi (Reset)
∞, 5
(Volume)
NAV • Displays the navigation screen.
MENU • Displays the option menu screen.
HOME • Displays the HOME screen ( P.19).
TEL • Displays the Hands Free screen (P.75).
0 (Eject)
Disc insert
slot
SD card slot • A slot to insert an SD card.
• If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.113).
• If the Security Indicator (SI) function is turned on, this indicator flashes
when the panel is detached (P. 84).
• Adjusts volume.
• Pressing for 1 second switches AV out sources.
• Pressing for 1 second turns the screen off.*
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second displays the Voice Recognition screen (P. 78).
• Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
• A slot to insert a disc media.
• You can play audio/visual file in the card. *
• The card is used for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
Return to the Top page
1
2
Basic Operations
*1 The function of the [MENU] button can be changed to camera view function. See User
interface (P.82).
*2 If the map update file remains in the SD card, you cannot play audio/visual file.
7
Page 9
Return to the Top page
Basic Operations
DNX715WDAB
1
2
3
4
5
6
7
8
9
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX715WDAB:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
1) Press 6 <0> button for 1 second.
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your finger
from the card.
The card pops up so that you can pull it out with your
fingers.
88
Labelled
side
Page 10
Number Name Motion
1
2
3
4
5
6
7
8
9
NAV • Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
∞, 5
(Volume)
HOME • Displays the HOME screen ( P.19).
MENU • Displays the option menu screen.
TEL • Displays the Hands Free screen (P.75).
0 (Eject)
Reset • If the unit or the connected unit fails to operate properly, the unit returns
Disc insert
slot
SD card slot • A slot to insert an SD card.
• Adjusts volume.
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second turns the screen off.*
• Pressing for 1 second displays the Voice Recognition screen (P. 78).
• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
to factory settings when this button is pressed (P.113).
• A slot to insert a disc media.
• You can play audio/visual file in the card. *
• The card is used for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
Return to the Top page
1
2
Basic Operations
*1 The function of the [MENU] button can be changed to camera view function. See User
interface (P.82).
*2 If the map update file remains in the SD card, you cannot play audio/visual file.
9
Page 11
Return to the Top page
4
312
5
678
8
Basic Operations
DNX4150DAB/ DNX4150BT/ DNX4150BTR
ATT
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX4150DAB, DNX4150BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
NOTE
• A dummy micro SD card is inserted as the slot cover. Remove it before using and keep it in an appropriate place.
1) Hold the microSD card with the label
side facing right and the notched section
down, and insert it into the
clicks.
ö To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
1010
slot until it
Page 12
Number Name Motion
1
2
3
4
5
6
7
8
Disc insert
slot
0 (Eject)
fi (Reset)
HOME • Displays the HOME screen ( P.19).
NAV • Displays the navigation screen.
TEL • Displays the Hands Free screen (P.75).
Volume Knob • Turning adjusts volume up or down.
microSD card
slot
• A slot to insert a disc media.
• Ejects the disc.
• Pressing for 1 second ejects the disc forcibly.
• If the unit or the connected unit fails to operate properly, the unit
returns to factory settings when this button is pressed (P.113).
• If the Security Indicator (SI) function is turned on, this indicator flashes
when the vehicle ignition is off (P. 84).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second switches AV out sources.
• Pressing for 1 second displays the Voice Recognition screen (P. 78).*
• Displays the option menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.
• A slot to insert a microSD card.
• You can play audio/visual file in the card. *
only)
• The card is used for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
Return to the Top page
Basic Operations
1
2
(DNX4150DAB/ DNX4150BT
*1 [TEL] button can also be used to switch to the rear view camera or turn off the display. See
User interface (P.82).
*2 If the map update file remains in the microSD card, you cannot play audio/visual file.
11
Page 13
Return to the Top page
Basic Operations
Turning on the Unit
The method of turning on is different depending on the model.
Press the <HOME> button.
1
DNX7150DAB
HOME
DNX715WDAB
ATT
The unit is turned on.
● To turn off the unit:
Press the <HOME> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
Initial setup (P.13).
1212
Page 14
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P. 113).
Set each item as follows.
11
Locale
Select the country for the navigation system.
The language, the distance unit, and the gasoline unit are set.
After setting, touch [Enter].
1 Touch [SET ].
2 Select the desired country.
Language
Select the language used for the control screen and setting items. Default is “British English (en)”.
1 Touch [SET ].
2 Touch [2] or [3] to select the desired language.
3 Touch [Enter].
For detailed operation, see Language setup (P.83).
Angle
Adjust the position of the monitor. Default is “0”.
1 Touch [SET ].
2 Touch desired angle number and [6].
For detailed operation, see Monitor angle control (P.86).
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or
select a fixed color for operation.
1 Touch [SET ].
2 Touch [ON] or [OFF] of [Panel Color Scan].
3 If you want to change color, touch [SET] of [Panel Color Coordinate].
4 Touch your desired color and [6].
For detailed operation, see Panel color coordinate (P.87).
Continued
13
Page 15
Return to the Top page
Basic Operations
Camera
Set the parameters for the camera.
1 Touch [SET ].
2 Set each item and touch [
For detailed operation, see Camera Setup (P.90).
DEMO
Set the demonstration mode. Default is “ON”.
1 Touch [ON] or [OFF].
Touch [Finish].
2
NOTE
• These settings can be set from the SETUP menu. See Setting Up (P.80).
].
1414
Page 16
Return to the Top page
Basic Operations
How to Play Media
Music CD and disc media
DNX7150DAB
Press the <0> button.
1
HOME
The panel opens.
Insert the disc into the slot.
2
The panel closes automatically.
The unit loads the disc and playback
starts.
● To eject the disc:
Press the <0> button.
Insert the disc into the slot.
1
● To eject the disc:
Press the <0> button.
DNX715WDAB
Press the <0> button.
1
The panel opens.
Insert the disc into the slot.
2
The panel closes automatically.
The unit loads the disc and playback
starts.
● To eject the disc:
Press the <0> button.
The unit loads the disc and playback
starts.
15
Page 17
Return to the Top page
Basic Operations
USB device
Connect the USB device with the
1
USB cable.
The unit reads the device and playback
starts.
● To disconnect the device:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the device from
the cable.
iPod
Connect the iPod.
1
Press the <HOME> button.
2
Touch [iPod] in the HOME screen.
3
(P.19)
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
Video/Picture Basic Operation (P.36).
SD card
1
DNX7150DAB/ DNX715WDAB
Press the <0> button for 1 second
to open the front panel.
0
NOTE
• For details, see Functions of the Buttons on the
Front Panel (P.6).
Insert the card into the slot until
2
it clicks.
The unit loads the card and playback starts.
DNX4150DAB/ DNX4150BT
● To disconnect the iPod/iPhone
connected with the cable:
Touch screen from the left end to display
the function panel.
Touch [ G ]. Disconnect the iPod/ iPhone
from the cable.
1616
● To remove:
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
NOTE
• A dummy micro SD card is inserted as the slot
cover. Remove it before using and keep it in an
appropriate place.
Page 18
HDMI/ MHL source
3
112
2
You can display the screen of smartphones
connected via the HDMI/MHL input terminal.
Press the <HOME> button.
1
Touch [HDMI/ MHL] in the HOME
2
screen. (P.19)
Start an application or playback
3
on your smartphone.
● About Miracast Dongles:
This unit is compatible with Miracast
Dongles. Connecting a Miracast Dongle
(KCA-WL100:optional accessory) to the
HDMI/MHL input terminal enables you
to enjoy listening to music, watching
videos, or viewing pictures over a wireless
connection.
Return to the Top page
Basic Operations
1 Switching channel area
Touch to switch the channel.
2 Menu display area
Touch to display the Menu control screen.
3 Key display area
Touch to display the control screen.
NOTE
• For details about Miracast Dongle settings, etc.,
refer to the instructions supplied with the Miracast
Dongle.
TV tuner ( /
DNX4150DAB/ DNX4150BT)
You can connect the TV tuner (commercially
available) with this unit and watch TV.
Before use
• When you use TV control function, connect the TV
tuner (commercially available) and set 3rd Party TV
Tuner Control in AV Input Setup (P.92) to ON.
• The TV tuner can be controlled with its supplied
remote control through the remote sensor on the
front panel of this unit.
Press the <HOME> button.
1
Touch [TV] in the HOME screen.
2
(P.19)
Menu control screen:
Touch
menu of the TV tuner.
Displays the menu/ Enters selected item
Touch [MENU/OK].
Moves the cursor
Touch [R], [S], [C], [D].
Exits menu control
Touch [Exit].
Menu display area to set the
17
Page 19
Return to the Top page
Basic Operations
Detaching The Front
Panel (DNX7150DAB)
You can detach the front panel to prevent
theft.
Press the <0> button for
1
1 second to open the front panel.
0
NOTE
• You can set the front panel to open automatically
when the ignition is turned off. See Monitor
angle control (P.86).
Detach the panel as the diagrams
2
below.
3
● Attaching the front panel:
Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
1
1
2
2
1
4
NOTE
• The attaching plate closes automatically in about
10 seconds after the front panel is released.
Remove the panel before this happens.
1818
Page 20
Operating with the HOME Screen
Most functions can be performed from the HOME screen.
Press the <HOME> button.
1
DNX7150DAB
HOME
DNX715WDAB
Return to the Top page
Basic Operations
ATT
HOME screen appears.
NOTE
• HOME screen can be
changed by flicking
left or right.
19
Page 21
Return to the Top page
Basic Operations
● Customizing HOME screen
You can arrange the position of the source
icons as you like.
1. Touch and hold the icon which you want
to move to go into the customizing
mode.
2. Drag it where you want to move.
From this screen, you can perform the following functions.
Function Icon Operation
Switch the audio source
etc.
Switch the video source
etc.
Switch the application
installed in the iPhone/
iPod or Android.
Switch the App source
Enter setup mode
Display navigation
screen
Turn off all audio
function
etc.
or
Customizing mode screen
Touch the icon of the
desired source.
Touch the icon of the
desired video source.
Touch the icon of the
desired application.
Touch the icon of the
desired App source.
Touch the icon of the
desired setup function.
Touch [NAV] or
navigation information.
Touch [STANDBY].
2020
Page 22
Return to the Top page
Basic Operations
Common Operations
Introduces the common operations.
Popup menu
Press the <MENU> button.
1
HOME
Press the volume knob.
1
ATT
Popup menu appears.
Touch to display the popup menu. The
contents of the menu are as follows.
: Displays the Screen Adjustment screen.
: Turns the display off.
: Displays the camera view.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu screen.
: Displays the control screen of current
source. Icon feature differs depending on
the source.
General
There are some functions which can be
operated from most screens.
(Graphic Equalizer)
Displays Graphic Equalizer screen.
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The
contents of the menu are as follows.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu
screen.
: Displays the control screen of current
source. Icon feature differs depending
on the source.
: Closes the menu.
21
Page 23
Return to the Top page
Basic Operations
List screen
There are some common function keys in the
list screens of most sources.
(Scroll)
Scrolls the displayed text.
etc.
Touch keys with various functions are
displayed here.
Displayed keys differ depending on the
current audio source, status, etc.
For examples of functions of each key, refer
to the table below.
Key Function
Lists all the music in the
lower hierarchy.
Moves to the upper
hierarchy.
Displays current category
folder.
Displays music/picture/
movie file list.
Flick scrolling
You can scroll the list screen by flicking the
screen up/down or right/left.
2222
Page 24
Navigation Operation
HOME
For details on the navigation function, please
refer to the Navigation Instruction Manual.
Display the navigation screen
Press the <NAV> button.
1
DNX7150DAB
ATT
DNX715WDAB
The navigation screen appears.
Return to the Top page
Basic Operations
Touch [ ] or [ ] in the
2
navigation screen.
Touching this area displays
the audio screen.
: Displays the navigation and control
keys of the current source.
Control audio from the
navigation screen
You can control audio sources while the
navigation screen is displayed.
Also, you can view the navigation
information while the source control screen
is displayed.
Touch the information bar.
1
The navigation screen with audio
information appears.
: Displays the navigation and current
video/picture playback display.
NOTE
• The screen switches between playback screen
and camera view each time the viewing area is
touched.
• Touching the source icon in the bottom of the
screen displays the full audio screen.
23
Page 25
Return to the Top page
HOME
Basic Operations
● To return to the full navigation
screen:
Touch [ ].
NOTE
• For details on control keys, refer to the instructions
in each section.
KENWOOD Traffic Powered By
INRIX (except DNX4150BTR)
You can receive INRIX traffic information
and weather forecast by connecting your
iPhone or Android smartphone in which
the “KENWOOD Traffic Powered By INRIX”
application is installed to this unit.
Preparation
• Install the latest version of the KENWOOD Traffic
Powered By INRIX application on your iPhone or
Android.
– iPhone: Search for "KENWOOD Traffic Powered
By INRIX" in the Apple App Store to find and
install the most current version.
– Android: Search for "KENWOOD Traffic Powered
By INRIX" in Google play to find and install the
most current version.
• For details, see “KENWOOD Traffic Powered By
INRIX” application.
To enter STANDBY source, touch
1
[STANDBY] icon in the Top Menu
screen.
Register the Android smartphone.
2
See Application link setup (P.56).
Press the <NAV> button.
3
2424
DNX7150DAB
ATT
DNX715WDAB
Navigation screen appears.
Touch [Apps] on the Main Menu screen
and then an icon of your desired content
For details, see Navigation system manual.
Page 26
Return to the Top page
Basic Operations
25
Page 27
Return to the Top page
3
4
1
5
667
8
2
DVD/Video CD Operation
DVD/Video CD (VCD) Operation
DVD/VCD Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD mode before starting operation, see Switching the operation mode
(P. 107).
• The screen shot below is for DVD. It may be different from the one for VCD.
Video screenControl screen
1 Information display
Displays the following information.
• Title #, Chap #: DVD title and chapter number display
• Track #/Scene #: VCD track or scene number display
Scene # is displayed only when Playback control (PBC) is on.
• 3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3 (play), ¡ (fast forward), 1 (fast backward),
¢ (search up), 4 (search down), 7 (stop),
(slow reverse playback).
Touch this area to display the disc lable name.
2 Status bar (DVD only)
For confirmation of current playing position.
3 Function bar
Various functions can be performed by using keys in this area. For details on the keys, see Function bar
(P. 27).
4 Control list
Unavailable in DVD/VCD source.
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see Function panel (P.28).
R
(resume stop), 8 (pause), (slow playback),
2626
Page 28
Return to the Top page
DVD/Video CD Operation
6 Searching area
Touch to search the next/previous content.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
7 Menu display area
This area functions differently depending on the current status.
• During DVD playback: Displays the DVD menu. During the menu display, displays the highlight
• During VCD playback: Displays the Zoom Control screen (P.30).
8 Key display area
Touch to display the control screen.
NOTE
• If you use a remote control, you can jump directly to the desired image with entering the chapter number, scene
number, play time, etc (P. 107).
control screen.
Function bar
DVD VCD
The functions of each key are as follows.
[E] [F]
Searches the previous/next content.
[DH]
Plays or pauses.
27
Page 29
Return to the Top page
DVD/Video CD Operation
Function panel
1 Touch on the left side of the screen.
DVD VCD
The functions of each key are as follows.
]
[
Repeats the current content. Each time you touch the key, repeat mode switches in the following
sequence;
DVD: "title repeat"
VCD (PBC On): Does not repeat
VCD (PBC Off ): "track repeat" , "function off"
[I]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next
time.
[A] [B]
Fast forward or fast backward. Each time you touch the key, the speed changes; standard, 2 times, 3
times.
[
] or [ ] (DVD only)
Plays in slow motion forward or backward.
[PBC] (VCD only)
Turn Playback control (PBC) on or off.
, "chapter repeat" , "function off"
2828
Page 30
Return to the Top page
DVD/Video CD Operation
DVD Disc Menu Operation
You can set up some items in the DVD-VIDEO
disc menu.
1 Touch illustrated area during playback.
Menu Control screen appears.
2 Perform desired operation as follows.
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control
mode (P. 29).
Moves the cursor
Touch [5], [∞], [2], [3].
Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
1 Touch [Highlight] in the Menu Control
screen.
2 Touch desired item on the screen.
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.
* These keys may not function depending on
the disc.
29
Page 31
Return to the Top page
DVD/Video CD Operation
DVD play mode setting
You can select DVD play mode.
1 Touch [Next] in the Menu Control
screen.
Menu Control 2 screen appears.
2 Touch the key which corresponds to
desired setting item.
Zoom Control For DVD And VCD
You can enlarge Playback screen for DVD and
VCD.
1 For VCD, touch illustrated area during
playback.
Zoom Control screen appears.
NOTE
• For DVD, please refer to DVD play mode setting
(P. 30) to display the Zoom Control screen.
2 Perform desired operation as follows.
Switches the subtitle language
Touch [Subtitle]. Each time you touch this key,
language is switched.
Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.
Controls zoom ratio
Touch [Zoom]. For details, see step2 in Zoom
Control For DVD And VCD (P.30).
Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.
Exits menu control
Touch [Exit].
Displays the Menu Control 1 screen
Touch [Previous].
3030
Switches zoom ratio
Touch [Zoom].
For DVD, changes the zoom ratio at 4 levels;
Off, 2 times, 3 times, 4 times.
For VCD, changes the zoom ratio at 2 levels;
Off, 2 times.
Scrolls the screen
Touch [5], [∞], [2], or [3] to scroll the screen
in the direction you touch.
Exits menu control
Touch [Exit].
Displays the previous menu*
Touch [Return].
Page 32
* This function may not be performed
depending on the disc.
NOTE
• You cannot touch the menu keys directly on the
screen when zooming.
Return to the Top page
DVD/Video CD Operation
31
Page 33
Return to the Top page
DVD/Video CD Operation
DVD Setup
You can set up the DVD playback functions.
NOTE
• Each operation in this section can be started from
the HOME screen. For details, see Operating with
the HOME Screen (P.19).
• Some setup items can only be set in standby
mode.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Source SETUP Menu screen appears.
4 Touch [DVD SETUP] in the list.
DVD SETUP screen appears.
5 Set each item as follows.
Menu/Subtitle/Audio Language*
See Language setup (P.33).
Dynamic Range Control*
Sets the dynamic range.
Wide: The dynamic range is wide.
Normal: The dynamic range is normal.
Dialog (Default): Makes the total sound
volume larger than other
modes. This is effective only
when you are using Dolby
Digital software.
Angle Mark
Sets an angle mark display.
ON (Default): An angle mark appears.
OFF: An angle mark does not appear.
Screen Ratio*
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter Box
format (having black stripes at the top
and bottom of screen).
4:3 PS: Displays wide pictures in the Pan &
Scan format (showing pictures cut at
the right and left ends).
Parental Level*
See Parental level (P.34).
DISC SETUP
See Disc setup (P.34).
3232
Page 34
Return to the Top page
DVD/Video CD Operation
Stream Information
Displays the present source information.
The stream (Dolby Digital, Linear PCM, MPEG,
WMA or AAC) appears.
* These items are disabled when a DVD is
inserted.
Language setup
This setting is for the language used in the
menu, subtitle, and voice. You cannot setup
these items during DVD playback.
1 Touch [SET] of the desired item;
[Menu Language], [Subtitle Language],
[Audio Language].
Language Set screen appears.
2 Enter the desired language code and
touch [Enter].
For language code, refer to DVD Language
Codes (P.121).
Sets the entered language and returns to
the DVD SETUP screen.
NOTE
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• To set the DVD’s original language for audio
language, touch [Original].
33
Page 35
Return to the Top page
DVD/Video CD Operation
Parental level
Sets a parental level. You cannot setup this
item during DVD playback.
1 Touch [SET] of [Parental Level].
Parental Pass screen appears.
2 Enter the parental code and touch
[Enter].
Parental Level screen appears.
NOTE
• The parental code is set to “0000” as default.
• To cancel the setup and return to the previous
screen, touch [Cancel].
• To clear the entered code, touch [Clear].
• Current parental level appears as [Level#].
3 Touch [2] or [3] to select a parental
level.
NOTE
• If a disc has higher parental lock level, you need
to enter the code number.
• The parental lock level varies depending on a
loaded disc.
• If a disc has no parental lock, anybody can play it
back even when you have set the parental lock.
Disc setup
Performs setup when using disc media.
1 Touch [SET] of [DISC SETUP].
DISC SETUP screen appears.
2 Select an option as follows.
CD Read
Sets the motion of this unit when a music CD
is played.
1 (Default): Automatically recognizes and plays
back an audio file disc, a DVD or a music CD.
2: Forcibly plays back a disc as a music CD.
Select [2] if you wish to play a music CD
having a special format or if you cannot play
a disc in [1] position.
On Screen DVD
Sets an on-screen display.
Auto: When updated, information appears for
5 seconds.
OFF (Default): Information does not appear.
NOTE
• [CD Read] is not available when a disc is in the
unit.
• You cannot play an audio file/VCD disc in the [2]
position. Also, you may not play some music CDs
in the [2] position.
3434
Page 36
Return to the Top page
DVD/Video CD Operation
35
Page 37
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
CD/Audio and Visual Files/iPod/App Operation
Music/Video/Picture Basic Operation
Most functions can be controlled from the source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.107).
• To connect the Android device with this unit, the cable (sold separately) and the profile which your Android
device supports are necessary as follows:
• To listen to music and watch video of APPS source
−MHL device
−KCA-MH100
−Bluetooth profile: SPP
• To listen to music of APPS source
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
• To listen to music of Bluetooth Audio source
−Bluetooth profile: A2DP
−Bluetooth profile: AVRCP
• To connect the iPod/iPhone with this unit, the cable, adapter (both sold separately), and the profile which your
iPod/iPhone supports are necessary as follows:
• To listen music and watch video with Lightning connector device
−Lightning Digital AV Adapter
−KCA-HD100
−KCA-iP103
−Bluetooth profile: SPP
• To listen music with Lightning connector device
−KCA-iP103
• To listen music and watch video with 30-pin connector device
−KCA-iP202
• To listen music with 30-pin connector device
−KCA-iP102
• To listen to music via Bluetooth
−Bluetooth profile: A2DP
−Bluetooth profile: SPP
When connecting with Lightning Digital AV Adapter some applications can be controlled from this unit. The
operable functions depend on the application.
• Do not leave the cable or the adapter made by other makers inside the car. It might lead the malfunction caused
by heat.
• Some settings are necessary to meet the connected iPod/iPhone or Android device. Refer to
connection setup (P.54) and Application link setup (P.56).
iPod/iPhone
See the following sections for each source operation.
• Music CD (P. 37)
• Disc media (P. 37)
• USB device (P. 39)
• SD Card (P. 39)
• iPod (P. 39)
• Aha (P. 46)
• AUPEO! (P. 49)
• Apps (P. 51)
3636
Page 38
CD/Audio and Visual Files/iPod/App Operation
4
7
1
6
523
Return to the Top page
Music CD and disc media
NOTE
• In this manual, “Music CD” will be referred to as the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files.
• The screen shot below is for CD. It may be different from the one for disc media.
Control screen Content list panel
1 Information display
Displays the following information.
• Track #: Each time you touch this area, display switches between current track number, text, etc.
• D, B, F, I, etc.: Current play mode display
2 Track information
Displays the information of the current track.
However, only "No Information" is displayed for music CD.
3 Function bar
Various functions can be performed by using keys in this area. For details on the menu, see Function
bar (P.40).
4 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see Function panel (P.41).
5 Content list
Touching on the screen or flicking the screen to left will display the Content list. Touching again or
flicking to right will close the list.
6 Artwork
The jacket of the currently playing file is displayed. Nothing is displayed if there is no jacket data.
7 Content list panel
Displays the playing list. When you touch a track/file name on the list, playback will start.
The meanings of each icon are as follows; D (play), B (fast forward), A (fast
backward), F (search up), E (search down), I (stop),
H (pause).
R
(resume stop),
37
Page 39
Return to the Top page
889
10
CD/Audio and Visual Files/iPod/App Operation
Video screen (disc media only)
8 Searching file area (disc media only)
Touch to search the next/previous file.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you
touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch
center of the display.
9
Menu display area (disc media only)
Touch to display the disc menu. For details, see Movie Control (P.45).
10
Key display area (disc media only)
Touch to display the control screen.
3838
Page 40
CD/Audio and Visual Files/iPod/App Operation
5
8
1
47623
Return to the Top page
USB device, SD card, and iPod
NOTE
• SD card is for DNX7150DAB, DNX715WDAB, DNX4150DAB and DNX4150BT only.
• The screen shot below is for USB device. It may be different from the one for iPod.
Control screen Content list panel
1 Information display
Displays the following information.
• Current file name: Each time you touch this area, display switches between file number/folder
• D, etc.: Current play mode display
The meanings of each icon are as follows; D (play, searching), H (pause).
2 Track information
Displays the information of the current file.
3 Status bar
For confirmation of current playing position. You can drag the circle left or right to change the playing
position.
4 Function bar
Various functions can be performed by using keys in this area. For details on the keys, see Function bar
(P. 40).
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see Function panel (P.41).
6 Content list
Touching on the screen or flicking the screen to left will display the Content list. Touching again or
flicking to right will close the list.
When you select the video source on the device connected with the Lightning connecter, the source is
switched to Apps (P. 51) automatically.
7 Artwork
The picture data is displayed if available from the current file. When the picture is not available, “No
Photo” is displayed.
8 Content list panel
Displays the playing list. When you touch a track/file name on the list, playback will start.
number and file name.
39
Page 41
Return to the Top page
9910
CD/Audio and Visual Files/iPod/App Operation
Picture/video screen
9 Searching file area (picture/video file only)
• Touch to search the next/previous file.
• During slide show in USB mode and SD card mode, touching each area searches the next/previous
music file.
• Scrolling from center of display to left or right performs fast backward or fast forward. To stop fast
backward/forward, touch center of the display. This function is not available when there is no music
file in the current folder.
10
Key display area (picture/video file only)
Touch to display the control screen.
Function bar
Music CD
Disc media
iPod
The following functions can be performed by using keys in this area.
[ ] (Disc media, iPod, USB device, and SD card only)
Searches track/file. For details on search operation, see Search Operation (P.42).
[E] [F]
Searches the previous/next track/file.
[DH]
Plays or pauses.
USB device and SD card
4040
Page 42
Function panel
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
1 Touch on the left side of the screen.
Music CD iPodDisc media
The following functions can be performed by using keys in this area.
[ ]
Repeats the current track/folder. Each time you touch the key, repeat mode switches in the following
sequence;
CD: "track repeat"
iPod: "song repeat" , "all songs repeat" , "repeat off "
Disc media, USB device: "file repeat" , "folder repeat" , "repeat off"
[ ]
Randomly plays all tracks in current folder/disc or in current playlist in the connected iPod.
Each time you touch the key, random mode switches in the following sequence;
CD: "track random"
Disc media, USB device, SD card: "file random" , "random off"
iPod: "track random" , "album random" , "random off"
[A] [B] (Music CD and disc media only)
Fast forward or fast backward.
[
] [ ] (disc media, USB device, and SD card only)
Searches previous/next folder.
[
] (picture files in USB device, and SD card only)
During picture playback, switches to picture display.
[I] (Music CD and disc media only)
Stops playback.
[G] (USB device, SD card and iPod only)
Touch to disconnect the device. For details, see How to Play Media (P.15).
, "repeat off"
, "random off"
USB device and
SD card
41
Page 43
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Search Operation
You can search music, video or picture files
by the following operations.
NOTE
• If you use a remote control, you can jump directly
to the desired track/file with entering the track/
folder/file number, play time, etc. For details, see
Direct search mode (P.107).
List search
You can search tracks, folders, and files
according to hierarchy.
1 Touch on the right side of the screen.
Control list appears.
2 Touch desired track/file.
Other search
When you want to narrow the list down,
there are other search ways.
This function is not available when music CD
is the current source.
1 Touch [ ].
The search type screen appears.
2 Touch desired search way.
USB device and SD card
iPod
Playback starts.
NOTE
• For disc media, you can switch the file list and
folder list by touching [
• For disc media, you cannot display the list during
random play and stop.
].
4242
The list sorted in the way you selected
appears.
See the following sections for each
operation.
• [Category List]: You can search a file by
selecting category ( P.43).
• [Link Search]: You can search a file of
same artist/album/genre/composer as the
current track (P. 43).
• [Folder List]: You can search a file according
to hierarchy (P. 44).
• [Thumbnail Viewer]: You can search a
picture file (P.44).
NOTE
• For disc media, you can display the folder list
directly by touching [
].
Page 44
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
Category search (USB device, iPod, and SD
card only)
1 Select whether you search by audio
files
or video files .
2 Touch the desired category from the
left part of the screen.
3 The list is sorted by selected category.
4 Touch desired item.
Playback starts.
NOTE
• To narrow the search you can select a letter from
the alphabet list in the center of the display.
• For operations in the list screen, see Common
Operations (P.21).
Link search (USB device, iPod, and SD
card only)
1 Touch the desired item from the left
part of the screen. You can select from
artist, album, genre and composer.
The list corresponding to your selection
appears.
NOTE
• The list is sorted by the way you selected.
• artist: Displays the album list of the artist.
• album: Displays all tunes of the current album.
• genre: Displays the artists list in which artists
belong to the same genre.
• composer: Displays the album list of the
composer of the current file.
2 Touch to select desired item in the
list. Repeat this step until you find the
desired file.
NOTE
• To narrow the search you can select a letter from
the alphabet list in the center of the display.
• For operations in the list screen, see Common
Operations (P.21).
43
Page 45
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Folder search (USB device, disc media,
and SD card only)
1 Touch the desired folder.
Folders in the selected source are displayed
in the center.
When you touch a folder its contents are
displayed.
The hierarchy till the current folder is
displayed on the left.
2 Touch desired item from the content
list.
Playback starts.
NOTE
• For operations in the list screen, see Common
Operations (P.21).
Picture search (USB device and SD card
only)
1 Touch the desired picture.
The selected picture appears in full screen.
See number 9-10 in USB device, SD card,
and iPod (P.39) for operation of picture
screen.
4444
Page 46
Movie Control
You can adjust the movie playback from a
disc media.
1 In the playback screen, touch
illustrated area.
Movie Control screen appears.
2 Perform desired operation as follows.
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
Changes subtitle language
Touch [Subtitle].
Changes audio language
Touch [Audio].
Exits the menu
Touch [Exit].
45
Page 47
Return to the Top page
33446
6
5
1
2
2
CD/Audio and Visual Files/iPod/App Operation
Aha Operation
You can listen to the Aha on this unit by controlling the application installed in the iPhone or
Android.
To enter Aha mode, touch [aha] icon in the HOME screen.
NOTE
• Install the latest version of the Aha application on your iPhone or Android. ( P.126)
iPhone: Search for "Aha" in the Apple App Store to find and install the most current version.
Android: Search for "Aha" in the Google play to find and install the most current version.
• When you first select Aha as a source, the setting screen for the connection with the device installed the apps will
appear. For the details, refer to Application link setup (P.56).
Content List screen
1 Content information
Displays the content of the current station being played.
2 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function
menu (P.47).
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.47).
4 Multi function menu
Various functions can be performed by using the keys in this area. For details on the keys, see Multi
function menu (P.47).
5 Text information
Displays the information of the current content being played.
6 List switching key
Touch to switch between the content list and the text information of current content.
Text information screen
4646
Page 48
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
Multi function menu
The following functions can be performed by
using keys in this area.
[ ]
Sets the content backward 15 seconds.
[
]
Sets the content forward 30 seconds.
[
]
Sets the received location information at
the destination of navigation. See Navigate
(P. 48).
[
]
Posts the location information to Facebook.
[
]
Sends the shout. See SHOUT (P.48).
[
]
Redelivers by Twitter.
[
]
Dials the received telephone number.
NOTE
• [SETUP], [AUDIO], and [REAR] functions same as
iPod.
Sub function menu
The following functions can be performed by
using keys in this area.
[ ]
Searches for a station. For details on searching,
see Station list screen (P.48).
[4] [¢]
Searches the previous/next track.
[38]
Plays or pauses.
]
[
Touching the key "dislikes" current content.
[
]
Touching the key "likes" current content.
47
Page 49
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
SHOUT
1 Touch [ ] in the control screen.
Status bar
Confirms the current location.
[Start]
Starts recording the voice.
[Stop]
Stops recording the voice.
[Send]
Sends the recorded voice.
[Cancel]
Cancels the voice and returns to the control
screen.
NOTE
• This function is available from an iPhone (iOS 5 or
later) connected via the KCA-iP103 or KCA-iP202
(optional accessory).
• This function is not available from an Android
device and iPhone connected via Bluetooth.
Station list screen
You can perform the following functions
from this screen.
Selects the station
Touch the station name in the list.
NOTE
• You cannot select iPod as rear source when
you select Aha as main source in dual zone
function.
Navigate
Sets the location information received from
Aha at the destination of navigation.
1 Touch [ ] in the control screen.
4848
]
[
Saves the location information.
[Go!]
Sets the location information at the destination
and starts navigation.
Page 50
CD/Audio and Visual Files/iPod/App Operation
2
3
4
1
Return to the Top page
AUPEO! Operation
You can listen to the AUPEO!on this unit by controlling the application installed in the iPhone or
Android.
To enter AUPEO!mode, touch [AUPEO!]icon in the HOME screen.
NOTE
• Install the latest version of the AUPEO! application "AUPEO!" on your iPhone or Android.
iPhone: Search for "AUPEO!" in the Apple App Store to find and install the most current version.
Android: Search for "AUPEO!" in Google play to find and install the most current version.
• When you first select AUPEO! as a source, the setting screen for the connection with the device installed the apps
will appear. For the details, refer to
1 Artwork switching area
The picture data is displayed if available from current content. When the picture is not available, “No
Photo” is displayed.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.50).
3 Multi function menu
Various functions can be performed by using the keys in this area. For details on the keys, see Multi
function menu (P.50).
4 Content information
Displays the information of the current content being played.
Application link setup (P.56).
49
Page 51
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Multi function menu
The following functions can be performed by
using keys in this area.
[ ]
Searches for a station. For details on searching,
see Station search (P.50).
[
]
Touching the key “Love” current song.
[ 38 ]
Plays or pauses.
[ ¢ ]
Skips the current song.
[
]
Touching the key "Ban" current song.
NOTE
• [SETUP], [AUDIO], and [REAR] functions same as
iPod.
Station search
You can list and select station.
1 Touch [ ] in the control screen.
The Station Search screen appears.
Selects the category and station
Touch the category and station name in the
list.
[
]
Returns to the previous category list.
5050
Page 52
CD/Audio and Visual Files/iPod/App Operation
231
Return to the Top page
Apps Operation
You can listen to music or watch video from the Apps operating on iPod touch/iPhone or Android.
To enter Apps mode, touch [APPS] icon in the HOME screen.
NOTE
• When you turn on the power and select apps as the source,
the caution for the operation, watching video and listening
music appears. With your acceptance, you can control apps,
listen to music and watch video from apps when you are
driving.
• When you first select APPS as a source, the setting screen for
the connection with the device installed the apps will appear.
For the details, refer to Application link setup (P.56).
• If the conditions below are satisfied, the touch keys will not
appear, but the touch operation from the screen of the unit to the Android device becomes possible.
−The unit and the Android device are connected with KCA-MH100 (sold separately) and over Bluetooth profile
HID and SPP.
−“Kenwood Smartphone Control” is installed on the Android device. For details, see web site. http://www.
kenwood.com/products/car_audio/app/kenwood_smartphone_control/eng/index.html
−If you drive using an app that is prohibited from using while driving, the confirmation screen appears. As you
select [Yes], the launcher of "Kenwood Smartphone Control" starts.
• Depending on the app, the touch keys may not work or be displayed.
When the touch keys appear When the touch operation is possible
1 Multi function key (iPod touch/iPhone only)
Touch to switch the multi function menu.
2 Multi function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Plays or pauses: Touch [3], [8], or [38] (iPod only).
• Searches the previous/next track/file: Touch [4] or [¢].
3 Sub function menu (iPod touch/iPhone only)
The following functions can be performed by using keys in this area.
• Hides all keys (During video file playback only): Touch [
]
51
Page 53
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
USB/SD/iPod/App/DivX Setup
You can perform setup when using USB/ SD/
iPod/ App/ DivX.
NOTE
• Each operation in this section can be started from
the HOME screen. For details, see Operating with
the HOME Screen (P.19).
• Some setup items can only be set in standby
mode.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Source SETUP Menu screen appears.
4 Touch [USB SETUP], [SD SETUP], [iPod
SETUP], [APP SETUP], or [DivX(R) VOD]
in the list.
Each setup screen appears.
See the following section for each setting.
• USB/SD setup (P.52)
• iPod setup (P.54)
• Application link setup (P.56)
• DivX(R) VOD (P.53)
USB/SD setup
NOTE
• The screen shot below is for USB device. However,
the setting items of USB and SD setup are quite
the same.
1 Set each item as follows.
Picture Display Time
Selects length of time to display JPEG picture
file in the screen. Select from [Short], [Middle],
and [Long] (default).
On Screen USB/On Screen SD
Sets how to display the information of the USB
device or SD card.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
5252
Page 54
DivX(R) VOD
1 Set each item as follows.
DivX(R) Registration Code
Checks the registration code. This code is
needed when making a disc which has DRM
(Digital Rights Management).
DivX(R) Deactivation
Deregisters the unit which is already registered.
After you touch the key, a confirmation
message appears. Follow the message and
complete the operation.
NOTE
• [DivX(R) VOD] is disabled when a disc is being
played.
• When downloading a DivX VOD file controlled
by DRM, register the code appeared on the
screen. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is
displayed when playing a DivX VOD file with the
viewing restriction. When the used number of
viewing reached maximum number, a warning
message appears and the file cannot be played.
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
53
Page 55
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
iPod setup
1 Set each item as follows.
AudioBook Speed
Sets the audio book playback speed. Select
from [Slow], [Normal] (default), and [Fast].
Wide Screen*
Sets Wide Screen. Set [ON] (default) or [OFF].
On Screen iPod
Sets how to display the information of the
iPod.
Auto (Default): Information appears for 5
seconds when updated.
OFF: Does not display any information.
iPod connection setup
Sets the way to connect the iPod/iPhone with
this unit For details on searching, see iPod/
iPhone connection setup (P.54).
* This setting is not available when an iPod is
connected.
iPod/iPhone connection setup
1 Press the <HOME> button.
HOME screen appears.
2 Touch [STANDBY].
3 Press the <MENU> button/
volume knob.
Popup menu appears.
4 Touch [SETUP].
SETUP Menu screen appears.
5 Touch [Source].
Source SETUP Menu screen appears.
6 Touch [iPod SETUP] in the list.
7 Touch [iPod Connection Setup] in the
iPod Settings screen.
iPod connection setup screen appears.
8 Touch [CHANGE].
9 Select the way to connect the iPod/
iPhone with this unit.
5454
USB + AV-IN
Select when connecting with KCA-iP202.
USB 1Wire
Select when connecting with KCA-iP103 or
KCA-iP102.
Page 56
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
Touch [Next].
10
Confirmation screen appears.
Touch [Done].
11
NOTE
• For the details of the necessary cable and adapter
to connect with iPod/iPhone, refer to Music/
Video/Picture Basic Operation (P.36).
• When you select “HDMI + BT” or “Bluetooth” in
step 9, Bluetooth device selection screen will
appear. Select the iPod/iPhone to be connected.
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
55
Page 57
Return to the Top page
CD/Audio and Visual Files/iPod/App Operation
Application link setup
Sets the device an application is installed in
and the app is selected as the source.
1 Press the <HOME> button.
HOME screen appears.
2 Touch [STANDBY].
3 Press the <MENU> button/
volume knob.
Popup menu appears.
4 Touch [SETUP].
SETUP Menu screen appears.
5 Touch [Source].
Source SETUP Menu screen appears.
6 Touch [APP SETUP] in the list.
7 Touch [CHANGE].
Select the way to connect the device
10
with this unit.
When selecting [iPod / iPhone]
USB + AV-IN
Select when connecting with KCA-iP202.
USB 1Wire
Select when connecting with KCA-iP103 or
KCA-iP102.
HDMI + BT
Select when connecting with KCA-HD100 and
Lightning Digital AV Adapter.
Bluetooth
Select when connecting via Bluetooth only.
8 Select the device installed the apps.
iPod / iPhone
Select when using iPod/iPhone.
Android / Other
Select when using Android or BlackBerry
device.
9 Touch [Next].
Connection setup screen appears.
5656
When selecting [Android / Other]
HDMI/MHL + BT
Select when connecting with KCA-MH100.
Bluetooth
Select when connecting via Bluetooth only.
Touch [Next].
11
Confirmation screen appears.
Touch [Done].
12
Page 58
NOTE
• This setup can be set when in STANDBY source.
• To enable the touch operation on this unit, install
"Kenwood Smartphone Control" and start it.
Search for "Kenwood Smartphone Control" in
Google play to find and install the most current
version.
• When you select APPS source and APP Settings
appears, touch [OK] after setting.
The screen will return to APP after you agree the
caution.
• For the details of the necessary cable and adapter
to connect with iPod/iPhonea and Android,
refer to Music/Video/Picture Basic Operation
(P. 36).
• When you select “HDMI + BT”, “HDMI/MHL +
BT” or ”Bluetooth” in step 10, Bluetooth device
selection screen will appear. Select the device to
be connected.
CD/Audio and Visual Files/iPod/App Operation
Return to the Top page
If a connectable Bluetooth device is not
displayed, touch [Search] and do the pairing of
the devices.
• When you select “iPod/ iPhone” in Apps Setup,
select “iPod” as the source, and select App on the
iPod, the source of this unit is also changed to
App automatically.
57
Page 59
Return to the Top page
5
1
4
6
2
3
Radio Operation
Radio Operation
Radio Basic Operation
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.107).
Control screen Control list screen
1 PS/Station name display (FM Tuner only)
Displays the PS name, Station name or Band, Frequency, Preset number.
2 Information display
Displays information about the current station: Frequency, PS name, Radio Text, Song Title, Artist Name,
etc.
3 Function bar
Various functions can be performed by using keys in this area. For details on the menu, see Function
bar (P.59).
4 Preset key
Recalls the memorized station or channel.
Touching on the screen or flicking the screen to left will display the Preset list. Touching again or
flicking to right will close the list.
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see Function panel (P.59).
6 Preset list
Recalls the memorized station or channel. When touched for 2 seconds, stores the current receiving
station or channel in memory.
5858
Page 60
Return to the Top page
Radio Operation
Function bar
The functions of each key are as follows.
[AM/FM]
Switches the band.
[E] [F]
Tunes in a station. The method of frequency switching can be changed. See Function panel (P.59).
]
[
Selects the method of searching from preset stations selecting. For details on search operation, see
Selecting Operation (P.63).
Function panel
1 Touch on the left side of the screen.
The functions of each key are as follows.
[TI] (FM Tuner only)
Sets the traffic information mode on. For details, see Traffic Information (P.64).
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a station with good reception automatically.
• AUTO2: Tunes in stations in memory one after another.
• MANUAL: Switches to the next frequency manually.
[AME]
Selects the auto memory mode. For details, see Auto memory (P.62).
[PTY] (FM Tuner only)
Searches a program by setting program type. For details, see Search by program type (P.64).
[MONO] (FM Tuner only)
Select the Monaural reception.
[LO.S] (FM Tuner only)
Turns the Local Seek function on or off.
59
Page 61
Return to the Top page
5
1
47623
Radio Operation
Digital Radio Basic Operation
(DNX7150DAB, DNX715WDAB, DNX4150DAB only)
Most functions can be controlled from the source control screen.
NOTE
• Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation
mode (P.107).
Control screen Control list screen
1 Service name display
Displays the Service name.
2 Information list
Displays information about the current music being played: Channel Name, Artist Name, Song Title,
Content Info, Category Name, Channel Description, Similar Channels
3 Function bar
Various functions can be performed by using keys in this area. For details on the menu, see Function
bar (P.61).
4 Preset key
Recalls the memorized service.
Touching on the screen or flicking the screen to left will display the Preset list. Touching again or
flicking to right will close the list.
5 Function panel
Touch on the left side of the screen to display the function panel. Touch again to close the panel. For
details on the keys, see Function panel (P.61).
6 Artwork area
The picture data is displayed if available from current content.
Touch to switch between the Control and Information screen.
7 Preset list
Recalls the memorized service. When touched for 2 seconds, stores the current service in memory.
6060
Page 62
Return to the Top page
Radio Operation
Function bar
The functions of each key are as follows.
[E] [F]
Tunes in a ensemble, service, and component. The seek mode switching can be changed. See
Function panel (P.61).
]
[
Selects the method of searching from preset stations selecting or channel searching. For details on
search operation, see Selecting Operation (P.63).
]
[
Change the Replay mode. See Replay (P.65).
Function panel
1 Touch on the left side of the screen.
The functions of each key are as follows.
[TI]
Sets the traffic information mode on. For details, see Traffic Information (P.64).
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good reception automatically.
• AUTO2: Tunes in ensemble in memory one after another.
• MANUAL: Switches to the next ensemble manually.
[PTY]
Searches a program by setting program type. For details, see Search by program type (P.64).
[DLS]
Display the Dynamic Label Segment screen.
61
Page 63
Return to the Top page
Radio Operation
Memory Operation
Auto memory
You can store stations with good reception in
memory automatically.
This function is for radio only.
NOTE
• Auto memory terminates when 6 stations are
stored or when all stations are tuned in.
• The operation ends automatically if you do not
operate within 10 seconds.
1 Touch desired band key.
2 Touch on the left side of the screen.
Touch [AME].
Manual memory
You can store the current receiving station in
memory.
1 Select a station you wish to store in
memory.
2 Touch [FM#] (#:1-15), [AM#] (#:1-5), or
[P#] (#:1-15) in which you want to store
the station for 2 seconds until a beep
sounds.
3 Touch [E] or [F] in the sub function
menu.
Auto memory starts.
6262
Page 64
Return to the Top page
Radio Operation
Selecting Operation
Preset select
You can list and select memorized station or
channel.
Selecting from the preset list
1 Touch on the right side of the screen.
List Control screen appears.
2 Select a station or channel from the list.
List select
You can select an ensemble from a list of
memorized ensembles or select a service
from a list of all services received.
1 Touch [ ] in the Function bar.
The list type screen appears.
2 Touch desired list way.
NOTE
• Touching [ ] and then [Preset List] displays
the preset channel list. You can also select your
desired channel from the list.
List screen appears.
3 Select a service from the list.
63
Page 65
Return to the Top page
Radio Operation
Search by program type
You can tune to a station with a specific
program type when listening to FM/ Digital
Radio.
1 Touch on the left side of the screen.
Touch [PTY].
PTY Mode screen appears.
2 Select a program type from the list.
3 Touch [Search].
Traffic Information
You can listen and watch the traffic
information automatically when a traffic
bulletin starts.
However, this feature requires a Radio Data
System and Digital Radio that includes the TI
information.
1 Touch on the left side of the screen.
Touch [TI].
Traffic information mode is set.
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
You can search a station of the selected
program type.
6464
NOTE
• It is necessary to have Traffic Information function
set to on in order to have the Traffic Information
screen appear automatically.
• The volume setting during reception of traffic
information is automatically stored. The next time
the traffic information is received, this unit recalls
the volume setting automatically.
Page 66
Return to the Top page
Radio Operation
Replay (Digital Radio only)
You can replay last 30 minutes of current
station.
1 Touch [ ] in the Function bar.
[4] [¢]
Forward/backward 15 seconds when touch it.
[38]
Plays or pauses.
[1] [¡]
Fast forward/fast backward when keep on
touching.
Replay time bar
Display recorded capacity
[
]
Change the Live mode
[
]
Touch to display “Sub function menu”.
[
]
Touch to switch the multi function menu.
[P1] - [P15]
Selects the preset ensemble.
[TI]
Sets the traffic information mode on. For
details, see Traffic Information (P.64).
[SEEK]
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good
reception automatically.
• AUTO2: Tunes in ensemble in memory one
after another.
• MANUAL: Switches to the next ensemble
manually.
NOTE
• PTY Watch starts operating and Replay function
cannot be used while receiving a program.
• While replaying the current station, you can not
store the station by Manual memory (P.62).
65
Page 67
Return to the Top page
Radio Operation
Tuner Setup
You can set tuner related parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Source SETUP Menu screen appears.
4 Touch [TUNER SETUP] in the list.
TUNER SETUP screen appears.
5 Set each item as follows.
Auto TP Seek
When traffic information station reception is
poor, automatically searches for a station that
can be received better. Default is “ON”.
Language Select
Selects a display language for the PTY function.
NEWS
Sets a news bulletin interrupt time. Default is
“OFF”.
AF
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
Regional
Sets whether to switch to the station only
in the specific region using the “AF” control.
Default is “ON”.
6666
Page 68
Return to the Top page
Radio Operation
Digital Radio Setup
You can set Digital Radio related parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
Source SETUP Menu screen appears.
4 Touch [DAB SETUP] in the list.
Digital Radio SETUP screen appears.
5 Set each item as follows.
PTY Watch
If the service of the set program type begins
with the ensemble being received, switches
from any source to Digital Radio for service
reception.
Announcement Select
Switches to the set Announcement service. For
details, see Announcement setup (P.68).
Seamless Blend
Prevents audio break when switching from
Digital Radio to Analog Radio. Default is “ON”.
Antenna Power*
Sets power supply to the Digital Radio
antenna. Set to “ON” when the Digital Radio
antenna in use is equipped with a booster.
Default is “ON”.
L-Band Tuning*
Sets L-band reception. When set to “ON”, also
receives L-band ensembles.
Related Service
When you select ON, the unit switches to a
related service (if exists) when a DAB service
network is not available.
Default is “OFF”.
* This item can be set when in STANDBY
source.
Priority
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If the
same service is provided by Radio Data System
when reception of the service being provided
by Digital Radio becomes poor, automatically
switches to Radio Data System.
67
Page 69
Return to the Top page
Radio Operation
Announcement setup
When the service for which ON is selected
starts, switches from any source to
Announcement to receive it.
1 Touch [SET] of [Announcement Select]
in the DAB SETUP screen.
The Announcement Select screen appears.
2 Touch each Announcement list and set
on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
6868
Page 70
Return to the Top page
Radio Operation
69
Page 71
Return to the Top page
Bluetooth Control
Bluetooth Control
Using the Bluetooth function, various
functions can be used: listening to the audio
file, making/receiving a call.
About the cell-phone and
Bluetooth audio player
This unit conforms to the following
Bluetooth specifications:
Version
Bluetooth Ver. 3.0+EDR Certified
Profile
Cell-phone:
HFP (V1.6) (Hands Free Profile)
SPP (Serial Port Profile)
HID (Human Interface Device Profile)
PBAP (Phonebook Access Profile)
GAP (Generic Access Profile)
Audio player:
A2DP (Advanced Audio Distribution Profile)
AVRCP (V1.4) (Audio/Video Remote Control
Profile)
Sound codec
SBC, AAC, MP3
NOTE
• For the cell-phones verified for compatibility,
access the following URL:
http://www.kenwood.com/cs/ce/bt/.
• The units supporting the Bluetooth function have
been certified for conformity with the Bluetooth
Standard following the procedure prescribed by
Bluetooth SIG.
However, it may be impossible for such units to
communicate with your cell-phone depending
on its type.
Registering And Connecting Bluetooth Unit
It is necessary to register the Bluetooth audio
player or cell-phone to this unit before using
the Bluetooth function.
You can register up to 5 Bluetooth units.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Bluetooth].
Bluetooth SETUP screen appears.
See the following section for each setting.
• Registering the Bluetooth Unit (P. 71)
• Connecting the Bluetooth unit (P. 72)
• Registering from the Bluetooth unit
(P. 72)
• Change the PIN code (P. 73)
7070
Page 72
Return to the Top page
Bluetooth Control
Registering the Bluetooth Unit
Preparation
• You cannot register the Bluetooth unit when you
are using the following sources:
iPod, Bluetooth Audio, APPS, aha
If you want to register the Bluetooth unit while
using one of the above mentioned sources, send
the connection request from the Bluetooth unit
and register it.
1 Press the <HOME> button.
HOME screen appears.
2 Touch [STANDBY].
3 Press the <MENU> button/
volume knob.
Popup menu appears.
4 Touch [SETUP].
SETUP Menu screen appears.
5 Touch [Bluetooth].
Bluetooth SETUP screen appears.
6 Touch [Search].
Searched Device List screen appears.
NOTE
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See Connecting the Bluetooth unit
(P. 72).
• This unit is compatible with the Apple Easy
Pairing function. When an iPod touch or iPhone is
connected to this unit, an authentication dialog
appears. Performing operation for authentication
on this unit or iOS smartphone registers the
smartphone as a Bluetooth device.
• If two Bluetooth units are connected, this unit will
not start the search. In this case disconnect one
of the Bluetooth units.
7 Select the Bluetooth unit to register
from the list.
NOTE
• If the unit cannot be searched in step 1, you can
search the unit again by touching [Search] in
above screen.
• Touch [Cancel] to cancel searching for the
Bluetooth unit.
8 Enter PIN code form the cell-phone.
71
Page 73
Return to the Top page
Bluetooth Control
Connecting the Bluetooth unit
1 Touch the device name you want to
connect.
Profile select screen appears.
NOTE
• If the icon is lighted, it means that the unit will
use that device.
2 Set each profile as follows.
Registering from the
Bluetooth unit
1 Search the unit (“DNX****”) from your
smartphone/cell-phone.
2 Input the PIN code in your smartphone/
cell-phone.
PIN code is set to “0000” as the default.
SSP (Secure Simple Pairing of
Bluetooth 2.1 or later)
1 Search the unit (“DNX****”) from your
smartphone/cell-phone.
2 Confirm the request both on the
smartphone/cell-phone and the unit.
TEL (HFP)
Means that the device is a cell-phone.
Audio (A2DP)
Means that the device is an audio player or
cell-phone with audio player.
APP SETUP
Selects the device in which apps are installed
and how to connect with the unit. Pressing
[CHANGE], you will jump to the step 8 in page
56. See Application link setup (P.56).
NOTE
• If a device has been paired, the Bluetooth unit
cannot be connected from the paired device.
• Touching [Remove] of [Device Remove Confirm]
removes registration information. After you touch
the key, a confirmation message appears. Follow
the message and complete the operation.
7272
Page 74
Change the PIN code
1 Touch [PIN Code Set].
PIN Code Set screen appears.
2 Input the PIN code
Return to the Top page
Bluetooth Control
3 Touch [Enter].
73
Page 75
Return to the Top page
223
3
5
1
4
6
6
Bluetooth Control
Playing Bluetooth Audio Device
Bluetooth basic operation
Simple Control screen List Control screen
1 Information display
Displays the name of the track information. If the information is not available, device name is displayed.
2 Multi function key
Touch to switch the multi function menu.
3 Multi function menu
The functions of each key are as follows.
• [4] [¢]: Searches the previous/next content.*
• [3]: Plays.*
• [8]: Pauses.*
• [7]: Stops playback.*
• [
AUDIO]: Touch to display the Audio Control screen. See Registering the Bluetooth Unit
(P. 71).
• [
SETUP]: Touch to display the SETUP Menu screen. See Setting Up (P.80).
• [ REAR
4 Control switching area
Touch to switch between the Simple Control and List Control screen.
5 File information
Displays the information of the current file.
6 Status bar
Displays the current play location, play time, and play mode.
* These items appear only when the audio player which supports AVRCP profile is connected.
]: Touch to mute the rear speaker.
NOTE
• If the operation keys do not appear, operate from the player.
• Depending on your cell-phone or audio player, audio may be heard and controlled but text information may not
appear.
• If the volume is too low, raise it on your cell-phone or audio player.
7474
Page 76
Return to the Top page
Bluetooth Control
Using Hands-Free Unit
You can use telephone function by
connecting the Bluetooth telephone to this
unit.
Making a call
1 Press the <TEL> button.
DNX7150DAB
HOME
DNX715WDAB
ATT
Hands Free screen appears.
NOTE
• When registration of your cell-phone is
completed, the phone book of the cell-phone is
automatically downloaded to this unit.
• Up to 600 phone numbers can be registered for
each registered cell-phone.
• Up to 30 digits can be registered for each
phone number along with up to 50 characters
representing a name. (50 is the number of
alphabetical characters. Fewer characters can be
input depending on the type of characters.)
• Depending on the type of your cell-phone, the
following restrictions are placed;
• The phonebook data cannot be downloaded
normally.
• Characters in the phonebook are garbled.
• To cancel downloading the phonebook data,
operate the cell-phone.
2 Select a dialing method.
See the following table for each method.
Select the cell-phone to use
When you connect two cell-phones
1 Touch [
to use.
If you register a cell-phone (device) for both
hands-free call and APP Link, and you select
that cell-phone (device) for hands-free call,
it is also selected as the device of APP Link
automatically. See Application link setup
(P. 56).
Call by entering a phone number
1 Touch [
2 Enter a phone number with number keys.
3 Touch [
Call using call records
1 Touch [
2 Select the phone number from the list.
3 Touch [
Call using the phonebook
1 Touch [
2 Select the name from the list.*
3 Select the number from the list.
4 Touch [
Call using the preset number
1 Touch [Preset #] to start calling the
corresponding phone number.
2 Touch [
Bluetooth SETUP
1 Touch [
Bluetooth SETUP screen appears.
] to select the phone you want
].
].
], [ ], or [ ].
].
].
1*2
].
].
].
Continued
75
Page 77
Return to the Top page
Bluetooth Control
*1 You can sort the list to begin with touched
character.
• Characters with no corresponding name
will not appear.
• During search, a non-accent character
such as “u” is searched for instead of an
accent character such as “ü”.
*2 You can set the list to arrange in the order
of last name or first name. For details, see
Hands-Free Setup (P.78).
NOTE
• If you edited the phonebook in your cell-phone,
touch “Download” on top of the phonebook list in
this unit to download it from your cell-phone. The
phonebook in this unit will be updated with the
latest downloaded data.
• While your car is moving, some functions are
disabled for safety reasons. The keys associated
with the disabled functions become ineffective
if touched.
• The status icons such as battery and antenna
displayed may differ from those displayed on the
cell-phone.
• Setting the cell-phone in the private mode can
disable the hands-free function.
Receiving a call
1 Touch [ ] to answer a phone call or
[ ] to reject an incoming call.
NOTE
• While monitoring the camera view, this screen
does not appear even if a call comes in. To display
this screen, press the <TEL> button or return the
shift knob of car to the driver position.
7676
Page 78
Return to the Top page
HOME
Bluetooth Control
Operations during a call
Adjust the receiver volume
DNX7150DAB
Press the <∞> or <5> button.
DNX715WDAB
Press the <∞> or <5> button.
Turn the volume knob.
Call-waiting
When you receive a call while talking on
another call, you can answer the newly
received call by touching [
is on hold.
Each time you touch [
change.
When you touch [
and switch to the call in hold.
]. The current call
], the caller will
], the current call will end
Phone number preset
You can register frequently used phone
numbers to this unit.
1 Enter the number you want to register
in Hands Free screen.
2 Touch [Preset 1], [Preset 2], or [Preset 3]
for 2 seconds in the Hands Free screen.
ATT
Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
Switching the speaking voice output
Touching [
switches the speaking voice output between
cell-phone and speaker.
]/ [ ] each time
77
Page 79
Return to the Top page
Bluetooth Control
Voice Recognition
You can access the voice recognition function
of the cell-phone connected to this unit.
You can search the cell-phone phonebook
by voice. (The functionality depends on the
cell-phone.)
1 Press the <TEL> button for 1second.
DNX7150DAB
HOME
Press for 1 second
DNX715WDAB
ATT
Press for 1 second
Voice Recognition screen appears.
Press for 1 second
2 Start speaking.
Hands-Free Setup
You can perform various setup about
handsfree function.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Bluetooth].
Bluetooth SETUP screen appears.
4 Touch [TEL SET-UP] in the Bluetooth
SET-UP screen.
NOTE
• You can use voice recognition function by
touching [ ] on the Hands Free screen.
7878
Hands-free SETUP screen appears.
Page 80
Return to the Top page
Bluetooth Control
5 Set each item as follows.
Bluetooth HF/Audio
Select the speakers to output the sound from
cell-phone (such as phone call voice and
ringing tone) and Bluetooth audio player.
Front Only: Outputs from the front speakers.
All (Default): Outputs from all speakers.
Auto Response*
Sets an automatic response time to pick-up an
incoming call.
OFF (Default): Automatic response is not
available.
0-99: Set calling ring time (second).
Auto Pairing
When set to “ON”, the Apple Auto Pairing
function is turned on to automatically register
the iPod touch or iPhone connected to this
unit.
ON (Default): Uses Apple Auto Pairing
function.
OFF: Not uses Apple Auto Pairing function.
Phone Information Use
Sets whether to use phonebook, outgoing,
incoming and missed calls list.
ON (Default): Yes.
OFF: No.
Sort Order
Sets how to arrange the cell-phone
phonebook.
First: Arranges in the order of first name.
Last (Default): Arranges in the order of last
name.
Echo Cancel Level
Adjusts the level of echo cancellation.
Default is “1”.
Microphone Level
Adjusts the sensitivity of the telephone
microphone. Default is “3”.
Noise Reduction Level
Reduces the noises generated by surrounding
environment without changing the
microphone volume. Use this setting when the
voice of caller is not clear. Default is “-10”.
[Restore]
Resets the settings to the default settings.
* Either the time interval for automatic
answer set on this unit or the time interval
set on the cell-phone, whichever is shorter
takes effect.
79
Page 81
Return to the Top page
Setting Up
Setting Up
Monitor Screen Setup
You can adjust image quality in iPod video,
picture file, menu screen, etc.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [Screen Adjustment].
Screen Control screen appears.
3 Adjust each item as follows.
iPod/ AV-IN/ Camera
DVD/ USB/ SD
Bright / Tint* / Color* / Contrast / Black /
Sharpness*
Adjusts each item.
Dimmer
Select dimmer mode.
ON: The display and buttons dim.
OFF: The display and buttons do not dim.
SYNC (Default): Turns the dimmer function on
or off when the vehicle light
control switch is turned on
or off.
NAV-SYNC: Turns the dimmer function on or
off according to the Navigation
Day/Night display setting.
Mode* (except USB/SD)
Select screen mode.
Full: Full picture mode
Just: Justify picture mode
Zoom: Zoom picture mode
8080
Normal: Normal picture mode
* Playback screen only
NOTE
• Adjusting items are different depending on the
current source.
• You can perform this function only when you
have applied the parking brake.
• The image quality can be set for each source.
Page 82
Return to the Top page
2
1
Setting Up
View Camera Control
You can set up display when a CMOS-3xx
Series view camera is used.
1 Press the <MENU> button for 1second.
DNX715WDAB
DNX7150DAB
HOME
Camera view screen appears.
2 Adjust each item as follows.
1 Guideline
Touching each time turns on or off the
guideline display alternately.
2 Angle
Touching each time changes camera angles in
the following order:
Super wide view/ Wide view/ Overhead view/
Wide view + Top view/ Corner view
For details, see the instruction manual of your
camera.
System Setup
NOTE
• Each operation in this section can be started from
the multi function menu.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [System].
System Menu screen appears.
See the following section for each setting.
• Set up the user interface (P. 82)
• Adjust touch panel (P. 83)
• Set up security (P. 84)
• Set up memory (P.85)
NOTE
• The video camera controls described above
may not be operable depending the connected
cameras.
• [MENU Key Longer than 1 Second] must be set to
“CAM”. See User interface (P.82)
81
Page 83
Return to the Top page
Setting Up
User interface
You can setup user interface parameters.
1 Touch [User Interface] in the list.
User Interface screen appears.
2 Set each item as follows.
Beep
Turns the key touch tone on or off.
Default is “ON”.
Language
Select the language used for the control
screen and setting items. See Language setup
(P. 83).
Text Scroll
Allows scrolling of text display on the source
control screen. Select from “Auto”/”Once”/”OFF”.
Auto (Default): Scrolls the text automatically.
Once: Allows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
Drawer Close
Sets whether to close the common menu
(P. 21) automatically. Default is “Auto”.
MENU Key Longer than 1 Second
( )
You can set the operation performed when the
MENU key is pressed for 1 second. Select from
”V.OFF”/”CAM”.
V.OFF (Default): Turn the display off.
CAM : Switches to the rear view camera video
display.
TEL Key Longer than 1 Second (
You can set the operation performed when
the TEL key is pressed for 1 second. Select from
“Voice”/”V.OFF”/”R-CAM”.
Voice (Default): Displays the Voice Recognition
V.OFF: Turn the display off.
R-CAM: Switches to the rear view camera
Animation
Sets whether to display animation. Default is “ON”.
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is “ON”.
DEMO
Set the demonstration mode. Default is “ON”.
Vehicle Information*
Displays the vehicle information.
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
Beep for Parking distance control*
Sets whether to generate a warning tone
when the onboard proximity sensor detects a
human or object.
Consult your Kenwood dealer for details.
screen. (P. 78).
video display.
1
)
1
8282
*1 This setting is available when a
commercial adaptor is connected.
Page 84
Return to the Top page
Setting Up
Language setup
1 Touch [SET] of [Language] in the User
Interface screen.
Language Setting screen appears.
2 Set each item as follows.
Select Mode
Selects the mode to select a language.
Easy (Default): Selects a language easily.
Advanced: Allows you to select languages for
respective items.*
Language Select
Selects a language.
* If you select [Advanced] for Select Mode,
the following screen appears.
Touch panel adjustment
1 Touch [Touch] in the System Menu
screen.
Touch Panel Adjustment screen appears.
2 Follow the instruction on the screen
and touch the center of each .
NOTE
• To cancel the touch panel adjustment, touch
[Cancel].
• To reset to the initial status, touch [Reset].
GUI Language Select:
Selects the display language used for the
control screen and so forth.
Navigation Language Select:
Selects the language used for navigation.
Text Language Select:
Selects the language used for tag text (song
information).
3 Touch [Enter].
NOTE
• To cancel the language setup, touch [Cancel].
83
Page 85
Return to the Top page
Setting Up
Security setup
You can set up a security code to protect
your receiver system against theft.
NOTE
• When the Security Code function is activated, the
code cannot be changed and the function cannot
be released. Note the Security Code can be set as
the 4 digit number of your choice.
1 Touch [Security] in the System Menu
screen.
Security screen appears.
2 Touch [ON] of [SI].
(DNX7150DAB, DNX4150DAB,
DNX4150BT, DNX4150BTR only)
NOTE
• DNX7150DAB
If “SI” is turned on, the SI indicator on the front
panel flashes when the panel is detached. Default
is “ON”.
• DNX4150DAB, DNX4150BT, DNX4150BTR
If “SI” is turned on, the SI indicator on the front
panel flashes when the vehicle ignition is off.
Default is “ON”.
NOTE
• If you enter a different security code, the screen
returns to step 4 (for the first code entry).
• If you have pressed <Reset> button or if you
have disconnected the Receiver from battery,
enter the correct security code as that you have
entered in step 4 and touch [Enter]. You can use
your receiver.
3 Touch [SET] of [Security Code Set].
NOTE
• If you have already completed the code
registration, [CLR] is displayed.
4 Enter a security code with four-digit
number and touch [Enter].
5 Enter the same code again and touch
[Enter].
Security code is registered.
8484
Page 86
Return to the Top page
Setting Up
Setup memory
Audio Control, AV-IN SETUP, Camera, and
Audio SETUP settings can be memorized. The
memorized settings can be recalled at any
time. For example, even when the settings
are cleared due to replacement of the
battery, the settings can be restored.
1 Touch [SETUP Memory] in the System
Menu screen.
SETUP Memory screen appears.
2 Follow the instruction on the screen.
[Lock]/[Unlock]*
Locks or unlocks the AV-IN SETUP, and Audio
SETUP settings.
Yes
Memorizes or recalls the settings.
No
Cancels the function or memorization.
The SETUP Menu screen appears again.
3 Follow the instruction on the screen.
Recall
Recalls the memorized settings.
Memory
Memorizes the current settings.
Clear
Clears the currently memorized settings.
Cancel
Quits memorization/recalling of settings.
* When [Lock] is selected, you cannot change
the AV-IN SETUP, and Audio SETUP settings.
Also, the locked key mark is displayed
under each setting icon in the setup menu.
85
Page 87
Return to the Top page
Setting Up
Display Setup
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Display].
Display Menu screen appears.
See the following section for each setting.
• Control monitor angle
• Adjust panel color (P. 87)
• Changing background image (P. 88)
(P. 86)
Monitor angle control
You can adjust the position of the monitor.
1 Touch [Angle] in the Display Menu
screen.
Angle setup screen appears.
2 Select a below number that represents
your desired angle setting.
Default is “0”.
NOTE
• You can store the current monitor angle as the
angle during power off. Touch [Memory] when
the desired angle is selected.
• The front panel can be set to open automatically
when the ignition is turned off, so that it can be
detached for antitheft purpose. Touch [ON] of
[Auto Open]. (DNX7150DAB only)
8686
Page 88
Return to the Top page
Setting Up
Panel color coordinate
You can set the screen and button
illumination color.
The selectable items differ depending on the
unit.
1 Touch [Color] in the Display Menu
screen.
Color screen appears.
2 Touch [OFF] of [Panel Color Scan].
3 Touch [SET] of [Panel Color Coordinate].
Panel Color Coordinate screen appears.
NOTE
• You can touch [SET] or [Initialize] when
[Panel Color Scan] is set to off.
• Touch [Initialize] to reset the settings to the
default settings.
Registering original color
You can register your original color.
1 Touch [Adjust] in the Panel Color
Coordinate screen.
Panel Color RGB Coordinate screen
appears.
2 Use [2] and [3] to adjust each color
value.
3 Touch the desired preset key for 2
seconds.
Panel color scan
You can set the panel color to continuously
scan through the color spectrum.
1 Touch [ON] of [Panel Color Scan] in the
Color screen.
Panel Color Scan is set to on.
4 Touch the desired color.
87
Page 89
Return to the Top page
Setting Up
Changing background image
You can load an image from the connected
USB device and set it for the background
image.
Before operating this procedure, it is
necessary to connect the device which has
the image to load.
1 Touch [Background] in the Display
Menu screen.
Background screen appears.
2 Touch [STANDBY].
3 Touch [Memory] of [User Background].
User Background File Select screen
appears.
4 Select the image to load.
display returns to the Background screen.
NOTE
• Touching [ ] rotates counter clockwise.
• Touching [
] rotates clockwise.
6 Touch [Change] of [Background
Change] in the Background screen.
7 Select an image for background and
touch [Enter].
NOTE
• See Playable Media and Files (P.114) for
readable image specifications.
• Touching [Delete] in the Background screen
deletes the background image. After you touch
[Delete], a confirmation message appears. Follow
the message and complete the operation.
5 Touch [Enter].
The selected image is loaded and the
8888
Page 90
Return to the Top page
Setting Up
Navigation Setup
You can set navigation parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Navigation].
Navigation SETUP screen appears.
4 Set each item as follows.
NAV Mute
Mutes the volume of rear speakers during
voice guidance of the navigation system.
Default is “ON”.
NAV Interrupt Speaker
Selects speakers used for voice guidance of the
navigation system.
Front L: Uses the front left side speaker for
voice guidance.
Front R: Uses the front right side speaker for
voice guidance.
Front All (Default): Uses both front speakers
for voice guidance.
NAV Voice Volume
Adjusts the volume for voice guidance of the
navigation system. Default is “20”.
89
Page 91
Return to the Top page
Setting Up
Camera Setup
You can set camera parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Camera].
Camera SETUP screen appears.
4 Set each item as follows.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or pressing
the <MENU> (
button for 1 second*.
OFF (Default): Switches to the rear view
camera video display when pressing the
<MENU> (
for 1 second*
R-CAM Settings*
Adjusts the CMOS-300 series with ID 1 set.
For details, see the instruction manual of your
camera.
Parking Guidelines*
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is “ON”.
Guidelines Setup*
Adjust the parking guidelines. See Adjusting
the parking guidelines (P.91).
*1 These settings become settable only when
the parking brake is on.
*2 This setting becomes settable only when
the parking brake is on and the CMOS-300
series is selected.
*3 [TEL Key Longer than 1 Second] or [MENU
Key Longer than 1 Second] must be set
to “R-CAM”/ “CAM”. See User interface
(P. 82)
*4 This setting becomes settable only when
the “Rear Camera” is set to [Other].
)/ <TEL> ( )
)/ <TEL> ( ) button
2
4
4
Rear Camera*1
Selects the type of rear camera to use.
CMOS-3xx: When the CMOS-300 series with ID
Other (Default): When the other camera is
1 set is connected.
connected.
9090
Page 92
Return to the Top page
Setting Up
Adjusting the parking guidelines
1 Touch [ON] of [Parking Guidelines] in
the Camera SETUP screen.
2 Touch [Adjust] of [Guidelines Setup] in
the Camera SETUP screen.
3 Adjust the parking guidelines by
selecting the mark.
4 Adjusting the position of the selected
mark.
A
C D
B
Software Information
Check the software version of this unit.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Software].
Software Information screen appears.
4 Confirm the software version. Touch
[Update] as necessary.
Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
• Touch [Initialize] for 1 second to set all the
marks to the initial default position.
NOTE
• For how to update the software, see the relevant
update procedure manual which comes with the
software.
91
Page 93
Return to the Top page
Setting Up
AV Input Setup
You can set AV input parameters.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [Source].
4 Touch [AV-IN SETUP] in the list.
AV-IN SETUP screen appears.
5 Set each item as follows.
TV Tuner Control ( / DNX4150DAB/
DNX4150BT)
Sets when connecting the TV tuner to AV
INPUT.
ON: Set to ON when connecting the 3rd party
TV tuner. AV-IN1 Name is set to TV. If you
connect the TV tuner made by DOS and
watch TV, you can perform some simple
operations by touching the screen of this
unit.
OFF (Default): Set to OFF when not
connecting the 3rd party TV
tuner.
AV-IN1 Name/ AV-IN2 Name
Sets a name to be displayed when you select
a system that is connected via the AV INPUT
port. Default is “VIDEO1” (AV-IN1)/ “VIDEO2”
(AV-IN2).
9292
Page 94
AV Output Interface Setup
You can select an AV source to be output at
the AV OUTPUT port. Default is “VIDEO1”.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [SETUP].
SETUP Menu screen appears.
3 Touch [AV-OUT].
AV-OUT Interface screen appears.
4 Touch [2] or [3] to set [AV-OUT] to
VIDEO1, DISC, iPod, USB, or OFF.
Return to the Top page
Setting Up
NOTE
• Only when you select “USB+AV-IN” in iPod
Connection Setup, “USB” can be selected as AV
output source. For the connection setting, refer to
iPod/iPhone connection setup (P.54).
93
Page 95
Return to the Top page
Controlling Audio
Controlling Audio
NOTE
• Each operation in this section can be started from
the multi function menu.
You can adjust the various settings such as
audio balance or subwoofer level.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [Audio].
Audio screen appears.
See the following section for each setting.
• Setting audio (P. 94)
• Controlling audio (P. 98)
• Controlling equalizer (P. 99)
• Performing zone control (P. 101)
• Set sound effect (P. 102)
• Set listening position (P. 104)
Setting Audio
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [Audio].
Audio screen appears.
3 Touch [Audio SETUP].
Audio SETUP screen appears.
9494
See the following section for each setting.
• Set up speakers (P. 95)
• Set up your car type (P. 96)
• Select DSP (P. 97)
Page 96
Return to the Top page
Controlling Audio
Speaker setup
You can select a speaker type and its size to
get the best sound effects.
When the speaker type and size are set,
the speaker crossover network is set
automatically.
1 Touch [Speaker Select] in the Audio
SETUP screen.
Speaker Select screen appears.
2 Touch the speaker you wish to adjust
and set each item as follows.
3 Select a speaker size using [2] and [3].
The speaker size is different depending
on the speaker type and the unit.
Front
OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm, 17 cm,
18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Rear
None, OEM, 8 cm, 10 cm, 12 cm, 13 cm, 16 cm,
17 cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
Subwoofer
None, 16 cm, 20 cm, 25 cm, 30 cm, 38 cm over
NOTE
• Select “None” if you have no speakers.
Tweeter (DNX7150DAB only)
You can set the tweeter when you are
selecting front speakers.
None, Small, Middle, Large
X’over
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was set
automatically when you selected the speaker
type.
For details, see Crossover network setup
(P. 96)
95
Page 97
Return to the Top page
Controlling Audio
Crossover network setup
You can set a crossover frequency of
speakers.
1 Touch the speaker to set the crossover
in the Speaker Select screen.
2 Touch [X’over].
X’over screen appears.
3 Set each item as follows.
TW (Tweeter) Gain *1 (DNX7150DAB only)
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
Gain (DNX7150DAB only)
Adjusts the front speaker, rear speaker, or
subwoofer level.
2
Phase*
Sets the phase of subwoofer output.
The phase is reversed 180 degrees when set
to “Reverse”. (When subwoofer is selected on
Speaker Select screen)
HPF FREQ
High Pass Filter adjustment. (When front or rear
speaker is selected on Speaker Select screen)
LPF FREQ
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
3
Slope*
Sets a crossover slope.
Car type setup
You can setup the car type and speaker
network, etc.
1 Touch [Car Type] in the Audio SETUP
screen.
Car Type screen appears.
2 Select your car type from the list.
NOTE
• If your car type is selected, the Delay Time
Alignment is set automatically (for timing
adjustment of sound output for each channel) to
have the highest surround effects.
1
Only when “Tweeter” is set to “Small”,
*
“Middle”, “Large” in <Speaker Setup>.
2
*
Only when “Subwoofer” is set to a mode
other than “None” in <Speaker Setup>.
3
*
Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in <X’over>.
9696
Page 98
Return to the Top page
Controlling Audio
Speaker location setup
1 In the Car Type screen, touch [Location].
Speaker Location screen appears.
2 Select the speaker locations using [3].
Front Speaker
Select the location from “Door”/ “On Dash”/
“Under Dash”.
Rear Speaker
Select the location from “Door”/ “Rear Deck”,
“2nd Row”/ “3rd Row” (Minivan, Passenger Van).
DSP select
You can select whether using DSP (Digital
Signal Processor) System.
1 Touch [Bypass] or [Through] of [DSP
Select] in the Audio SETUP screen.
Bypass
There is no effect by DSP.
Through
There is an effect by DSP.
NOTE
• When the mode is set to [Bypass], DSP System
cannot be adjusted.
97
Page 99
Return to the Top page
Controlling Audio
Controlling General Audio
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [Audio].
Audio screen appears.
3 Touch [Audio Control].
4 Set each item as follows.
Bass Boost
Sets the amount of bass boost among “OFF”/
“Level1”/ “Level2”/ “Level3”.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you
suddenly switch to another source may be
extremely loud.
Fader #/Balance #
Adjust the volume balance around the
touched area.
[2] and [3] adjust the right and left volume
balance.
[5] and [∞] adjust the front and rear volume
balance.
Volume Offset*
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “None”.
See Speaker setup (P.95).
9898
Page 100
Return to the Top page
Controlling Audio
Equalizer Control
You can adjust equalizer by selecting the
optimized setting for each category.
1 Press the <MENU> button/
volume knob.
Popup menu appears.
2 Touch [Audio].
Audio screen appears.
3 Touch [Equalizer].
Equalizer screen appears.
Operation
Controlling EQ curves
1 Select EQ curve from [Natural],
[Rock], [Pops], [Easy], [Top40], [Jazz],
[Powerful], [iPod], and [User].
NOTE
• [iPod] is available only during iPod source.
99
Loading...