Kenmore 25371884100, 25371882100, 25371844100, 25371842100, 25371832102 Owner’s Manual

...

0 (0)

Refrigerator

Top Mount

Use & Care Guide

Refrigerador

Congelador Superior

Gufa para su uso y cuidado

R6frig6rateur

Compartiments Superpos6s

Guide d'utilisation et d'entretien

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Sears Canada, Inc., Toronto, Ontario, Canada M5B 2B8

"/1

www.sears.com

240432301 (0102)

Congratulations

Instructions

Congratulations on your purchase of a new refrigerator! We

here at Sears are very proud of our product and we are

completely committed to providing you with the best

service possible. Your satisfaction is our #1 priority.

We know you'll enjoy your new refrigerator and Thank You

for choosing our product. We hope you consider us for

future purchases.

PLEASE READ AND SAVE THESE

INSTRUCTIONS

This Owner's Guide provides specific operating

instructions for your model. Use your refrigerator only as

instructed in this manual. These instructions are not meant

to cover every possible condition and situation that may

occur. Common sense and caution must be practiced

when installing, operating and maintaining any appliance.

Please record your model and serial numbers below

for future reference. This information is found on the

serial plate located inside the refrigerator

compartment.

NOTE: Use only soap and water to clean serial ptate.

Model Number: 253

Please Read All Instructions Before

Using This Refrigerator.

FOR YOUR SAFETY

• Do not store or use gasoline, or other flammable liquids

in the vicinity of this or any other appliance. Read product

labels for warnings regarding flammability and other

hazards.

• Do not operate the refrigerator inthe presence of

explosive fumes.

• Avoid contact with any moving parts of automatic ice

maker.

• Remove all staples from the carton. Staples can cause

severe cuts, and also destroy finishes if they come in

contact with other appliances or furniture.

CHILD SAFETY

Destroy or recycle the carton, plastic bags, and any

exterior wrapping material immediately after the refrigerator

is unpacked. Children should NEVER use these items to

play. Cartons covered with rugs, bedspreads, plastic

sheets or stretch wrap may become airtight chambers,

and can quickly cause suffocation.

or: 970

Serial Number:

Purchase Date:

PROPER DISPOSAL OF YOUR REFRIGERATOR

OR FREEZER

Risk of child entrapment

Child entrapment and suffocation b_.___

are not problems of the past.

TABLE OF CONTENTS Junked or abandoned refrigerators

Welcome ............................................. 2

Safety Instructions .............................. 2-3

Warranty .............................................. 3

Canada - Limited Warranty .................. 4

Installation--Includes Connecting Optional Ice

Maker To Water Supply ..................................... 5-6

Door Removal & Reversal .................. 7-8

Features At A Glance ......................... 9

Temperature Controls .......................... 10

Looking Inside ..................................... 11-13

Ice Service .......................................... 14

Food Storage & Energy Saving Tips ... 15

Normal Operating Sounds & Sights .... 16

Care & Cleaning .................................. 17-18

or freezers are still dangerous -

even if they will sit for "just a few

days." If you are getting rid ofyour

old refrigerator orfreezer, please

follow the instructions below to

help prevent accidents.

Before you throw away your

old refrigerator/freezer:

• Remove doors.

• Leave shelves in place so children may not easily climb

inside.

• Have refrigerant removed by a qualified service

technician.

Before You Call .................................... 19

Warran ty Informa tion

FULL ONE-YEAR WARRANTY ON

REFRIGERATOR

These Guidelines Must Be Followed To Ensure That

Safety Mechanism s !nThiS RefdgeratorWill Operate For one year from the date of purchase, when this

Properly. refrigerator is operated and maintained according to the

instructions provided in this Owner's Guide, Sears will

ELECTRICAL INFORMATION

• The refrigerator must be plugged into its own

dedicated 115 Volt, 60 Hz., AC only electric outlet.

The power cord of the appliance is equipped with a

three-prong grounding plug for your protection against

electrical shock hazards. It must be plugged directly

into a properly grounded three-prong receptacle. The

receptacle must be installed inaccordance with local

codes and ordinances. Consult a qualified electrician.

Do not use an extension cord or adapter plug.

• Immediately repair or replace any power cord that

becomes frayed or damaged.

• Never unplug the refrigerator by pulling on the power

cord. Always grip the plug firmly, and pull straight out

from the receptacle to prevent damaging the power cord.

• Unplug the refrigerator before cleaning and before

replacing a light bulb to avoid electrical shock.

• Performance may be affected if the voltage varies by

10% or more. Operating the refrigerator with insufficient

power can damage the compressor. Such damage is

not covered under your warranty.

• Do not plug the unit into an outlet controlled by a wall

switch or pull cord to prevent the refrigerator from being

turned off accidentally.

• Avoid connecting refrigerator toa Ground Fault Interruptor

(GFI) circuit.

repair this refrigerator, free of charge, if defective in

material orworkmanship.

FULL FIVE-YEAR WARRANTY ON SEALED

REFRIGERATION SYSTEM

For five years from the date of purchase, when this

refrigerator is operated and maintained according to the

instructions provided in this Owner's Guide, Sears will

repair the sealed system (consisting of refrigerant,

connecting tube, and compressor motor), free of charge, if

defective in material or workmanship.

The above refrigerator warranty applies only to

refrigerators which are used for storage of food for private

household purposes.

This warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

Warranty service is available by contacting the NEAREST

SEARS SERVICE CENTER/DEPARTMENT in the United

States. See the back page of this manual.

For warranty questions, please contact the following

address:

Sears, Roebuck and Co.

Dept. 817WA

Hoffman Estates, IL 60179

NOTE: Turning thefreezer temperature control to"O"tums

off the compressor, but does not disconnect electrical

power to the light bulb or other electrical components.

Groundingtype

wall receptacle

(_ Do not, under

,- _ I / any circumstance1

[J/I _1 cut, remove,

IAm or bypass the

I _1_ grounding prong.

-,oo

3-pronggroundedp

CANADA- LIMITED WARRANTY

Refrigerators

Sears Canada Inc., warrants every new Kenmore refrigerator to be free from defects inmaterial or workmanship. What Sears

will do, free of charge, in case of defect:

What s covered 9 How long warranted?

: (from elateof sale)

The Compressor TEN (10) YEARS

The Sealed System

(consisting of refrigerant, FIVE (5) YEARS

evaporator, and condenser)

All other parts or

adjustments ONE (1) YEAR

either repair or supply

replacement part for:

TEN (10) YEARS

FIVE (5) YEARS

ONE (1) YEAR

Labor:

Install repaired or

replacement part for:

FIVE (5) YEARS

ONE (1) YEAR

Normal Responsibility of the Customer

The following items, since they are not manufacturing defects, are not included in the warranty, but are the responsibility of

the customer:

1) Damage to finish after delivery.

2) Improper power supply, low voltage, or any defects in the house wiring system or appliance not connected

to electric outlet.

3) Replacement of light bulbs.

4) Damage caused by moving the product from its original installation.

5) Service required as a result of alteration, abuse, fire, floods, or acts of God.

6) Providing adequate air circulation to the refrigerating system.

7) Proper use and care of product as listed in the customer's manual; proper setting of the controls.

If any service isrequired under this warranty, simply call 1-800-4-MY-HOME (1-800-469-4663).

This warranty is in addition to any statutory warranty. The above warranty covers Kenmore Refrigerators sold and operated

in Canada only and shall not apply if the refrigerator is used for other than domestic purposes.

Sears Maintenance Agreement

Maintain the value of your Kenmore refrigerator with a Sears Maintenance Agreement.

SEARS CANADA INC. ° Toronto, Canada ° M5B 2B8

PRINTED IN U.S.A.

ThisUse& CareManualprovidesspecificoperating

instructionsforyourmodel.Usethe refrigeratoronlyas

instructedinthisUse&CareManual.Beforestartingthe

refrigerator,followtheseimportantfirst steps.

LOCATION

• Choose a place that is near a grounded electrical outlet.

Do Not use an extension cord or an adapter plug.

• If possible, place the refrigerator out of direct sunlight

and away from the range, dishwasher or other heat

sources.

• The refrigerator must be installed on a floor that is level

and strong enough to support a fully loaded refrigerator.

• Consider water supply availability for models equipped

with an automatic ice maker.

INSTALLATION

• Do Not install the refrigerator where the temperature

will drop below 55°F (13°C) or rise above 110°F (43°C).

The compressor will not be able to maintain proper

temperatures inside the refrigerator.

DO Not block the toe grille on the

lower front of your refrigerator. Sufficient air

circulation is essential for the proper operation of

your refrigerator. 2.

Installation Clearances

• Allow the following clearances for ease of installation,

proper air circulation, and plumbing and electrical

connections:

Sides & Top 3/8"

Back 1"

NOTE: If you See black coils/tubing onthe back of Your

refrigerator (air-co01ed condenser) leave 31!clearance at

top of refrigerator.

DOOR OPENING

NOTE: If Your refrigerator is placed with the door hinge

side against a wall, you may have to allow additional

space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access

to a counter when removing food. To make this possible,

the direction in which the doors open can be reversed. See

Door Removal & Reversal Instructions on page 7.

LEVELING

All four corners of your refrigerator must rest firmly on a

solid floor. Your refrigerator is equipped with adjustable front

rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

Use flat-blade screwdriver or 3/8" socket wrench

to adjust front rollers.

NOTE: Raise the front of the refrigerator enough so the

doors close freely when opened halfway. The refrigerator

should slope ¼, to V2"from front-to-back. Then level

the refrigerator from side to side.

Raise

Installation - Connecting Optional Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the

refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

Copper tubing is recommended for the water supply line. Water supply tubing made of W' plastic is not

recommended since it greatly increases the potential for water leaks. Manufactu rerwill not be responsible for

any damage if plastic tubing is used for supply line.

DO NOT install water supply tubing in areas where temperatures fall below freezing.

Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft

water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need

• Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

• Access to a household cold water line with water pressure between 20 and 120 psi.

• A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed,

you will need to measure the distance from the ice maker inletvalve at the back of the refrigerator to your cold water

pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

• A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type

shutoff valve.

• A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: Water line kit number 46 i 06 8003, available through Sears retail or catalog stores at additional cost, contains

25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression

nuts, (2) ferrules/sleeves, and instructions for installing a water suppty line.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply

and flush supply line until water is clear. Turn OFF water supply at shut

off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line,

as shown.

5. Push water supply line into water valve inlet as far as itwill go (¼ inch).

Slide ferrule (sleeve) intovalve inletand finger tighten compression nut

onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of

refrigerator as shown.

7. Coil excess water supply line (about 21/2turns) behind refrigerator as shown

Brass

Compression

water line

WaterValve

wValve

and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that _CopPerwaterllne

leak. _ !_ _ho!d _rSUp#Y

9. Reconnect refrigerator to electrical power source. ///_ (Ir_lude _ tubinginloop to allow

10. Toturn ice maker on, lower wire signal arm (see ice maker front cover for ON/ movingre_igerteoroteforcleaning.)

OFF position of arm).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may

cause ice maker to cycle two or three times before making a full tray of ice, New Plumbing may cause iceto be discolored

or have poor flavor. Discard ice made during the first 24 hours.

Door Removal and Reversal Instructions

Door_p Hand_

Hinge BoK'om

WrenCh

Screws TOp Hm_

Cabinet Hole

Plugs

Hinge Hole

Plug

Top Hinge

Handle Hole

Door Stop Door

Screw_

Hinge

Center

Hinge Hole

plug Handle

Hole

Door Stop Door

Stop

DOOR REMOVAL AND REVERSAL INSTRUCTIONS:

NOTE: The direction inwhich your refrigerator doors open (door swing)

can be reversed, from left to right or right to left, by moving the door

hinges from one side to the other. Reversing the door swing should be

performed by a qualified person.

IMPORTANT: Before you begin, turn the refrigerator temperature control

to "0" and remove the electrical power cord from the watt outlet. Remove

any food from door shelves.

1. Remove toe grille and top hinge cover.

2. Remove top hinge with 3/8" hex driver and lift freezer door off of

center hinge pin. Set door aside.

3. Unscrew center hinge pin using adjustable wrench and save for

reassembly. Ensure plastic washer stays on hinge pin.

4. Lift refrigerator door off of 3ottom hinge and set aside.

5. Remove center hinge and shim by removing nside screw and

loosening two outside screws enough to allow hinge to slide out

6. Loosen two outside screws on opposite side of refrigerator remove

inside screw and install center hinge.

7. Remove bottom hinge with 3/8" hex driver. Reinsert two outside screws

in holes and tighten. Inside screw will go to opposite side in step 8.

8. Remove two outside screws on opposite side of refrigerator and install

bottom hinge.

9. Unscrew bottom hinge pin using adjustable wrench. Move hinge pin

Loother hole in hinge and tighten with adjustable wrench

10. Reverse door handles _see instructions on next page).

11. Move freezer and refrigerator door stops to opposite side.

12. Position refrigerator door onto lower hinge pin and screw center hinge

pm through center hinge into top of door.

13. Tighten center hinge pin with adjustable wrench.

14. Lower freezer door onto center hinge pin.

15. Install top hinge.

16. Replace toe grille and top hinge cover.

17. Plug in electrical power cord and turn refrigerator temperature control

to center position. Adjust setting as necessary.

Door Removal and Reversal Instructions (continued)

NOTE: Some models have "pocket" handles, which are recessed into the sides of the door. On these models, only

the hinges will need to be reversed.

TO REMOVE FREEZER HANDLE:

(Handles may be easier to reverse while doors are off.,

1. Remove two screws attaching handle to bottom of freezer door.

2. Swing bottom of handle away from the door and slide handle straight

up and off of dovetail button.

3. Remove screw and dovetail button and nstall on other side. moving

hole plugs from corresponding holes to opposite side.

TO ATTACH FREEZER HANDLE:

1. Start with handle offset away from door. Place top of handle over

dovetail button, sw_ng handle into an upright poslt_on and pull

downward, locking it into place.

2. Secure bottom of handle with two screws removed earlier.

TRIM REMOVAL (FULL-LENGTH TRIM MODELS ONLY)

Buttonj

Plug

Lock Handle

over

Screw---_,

In some models, the refrigerator door has a full length trim piece which continues from the bottom of the handle to the

bottom of the door. The top of the trim fits around the base of the handle. An adhesive "trim lock" is positioned about

halfway down. The bottom of the trim is held in place by either an adhesive trim lock, or a trim lock with two prongs

inserted into a hole on the face of the door.

TO REMOVE TRIM:

1. Remove trim by gently pulling trim lock areas out and away from door.

2. When trim is free from door, slide the trim straight down and away from base of handle.

NOTE: For models with short handle trim, remove by sliding trim straight down and off of handle bracket.

TO REMOVE REFRIGERATOR HANDLE:

(Handles may be easier to reverse while doors are off.)

1. Remove two screws attaching handle to top of refrigerator door.

2. Swing top of handle away from door and slide handle down and off of

dovetail button.

3. Remove screw and dovetail button and install on other side, moving

hole plugs from corresponding holes to opposite side.

TO ATTACH REFRIGERATOR HANDLE:

1. Start with handle offset away from door. Place bottom of handle over

dovetail button, swing handle intoan upright position and pullupward,

locking it into place.

2. Secure top of handle with screws.

TO ATTACH TRIM:

1. Slide both trim locks out of trim.

2. Insert new adhesive trim locks contained in your literature pack.

NOTE: Trim lock must be removed and installed by sliding Over the

two donut shaped areas.

3. Install trim to handle by sliding over base of handle. Carefully align

trim and press down at trim lock locations.

4. Replace hole plug on opposite side. Use rubbing alcohol to remove

any adhesive residue from old trim lock locations.

.w I ¸!

Lock Handle

over

Dovetail

- Button

"_ Adhesive

Trim

Trim¸

Ice Maker

Ice Bucket _-.

Freezer Shelf

Freezer

Control

Refrigerator

Control

Dell Drawer

Covel

Dell Drawer

Half Shelf

Wine Rack

Special Item

Full Shelf

Crisper

Drawers

Freezer Light

_Toe Grille

_FixedDoor Bin

_Door Rack

Dairy Door

Tall Bottle

Retainer

Snugger

Door Bin

Fixed Door Bin

Door Rack

Features may vary according to model

COOL DOWN PERIOD

Toensure safe food storage, allow the refrigerator to operate with the doors closed for at least 8 to 12 hours before loading

it with food.

REFRIGERATOR & FREEZER CONTROLS

NOTE: When first setting the controls or when changing a setting, wait 24 hours for the temperature to stabilize before

making additional changes.

TEMPERATURE ADJUSTMENT

• After 24 hours, adjust the controls as needed. Adjust

temperature gradually: move the knob in small

increments, allowing the temperature to stabilize,

• For colder temperatures, turn the knob towards Cold

• For warmer temperatures, turn the knob towards Warm

Turning the refrigerator control will change temperatures in

both compartments. For example, if the refrigerator control

isturned to a colder setting, the freezer control may have to

be adjusted to a warmer setting. Turning the freezer contro

will change only the freezer temperature.

To maintain temperatures, a fan circulates air 'n the

refrigerator and freezer compartments. For good circulation

do not block cold air vents with food items.

P.e_mmende_

Freezer Control some moae]s

Settla _ edlertmeats /

w.mO\ /o c01d /

Refrigerator ControJ {some models_

Refrigerator & Freezer Control (some models,

IMPORTANT: Turning the

refrigerator temperature

control to "0" turns off the

compressor, but does not

disconnect the power to

the light bulb and other

electrical components.

TEMPERATURE ADJUSTMENT GUIDE

If Refrigerator compartment Is Too Warm Turn Refrigerator Contro! Slightly Towards Cold.

If Refrigerator compartment Is Too Cold Turn Refrigerator Contro! Slightly Towards Warm.

If Freezer compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.

If Freezer compartment Is Too Cold Turn Freezer Control Slightly Towards Warmer.

To Turn Refrigerator Off Turn Refrigerator Contro! To 0.

To avoid personal injury or property damage' handle

tempered glass shelves carefully. Shelves may break suddenly if

nicked, scratched, or exposed to sudden temperature change.

SHELF ADJUSTMENT

Refrigerator shelves are easily adjusted to suit individual needs. Before

adjusting the shelves, remove all food.

To adjust sliding shelves:

O Remove shelf by pulling forward to stop position.

Lift front edge up and pull out.

Replace the shelf on any pair of rails by reversing this procedure.

To adjust sliding shelves:

NOTE: Cantilever shelves are supported at the back of the refrigerator.

Cantilever Shelves are available ineither glass or wire.

O Lift front edge up.

Pull shelf out.

Replace the shelf by inserting the hooks at rear of the shelf into the wall

bracket. Lower the shelf into the desired slots and lock into position.

SpillProoF Mglass shelves (some models) catch and hold accidental spills. In

some models, the SpillProoF Mshelves slide out for easy access to food and

for fast cleaning. The shelves slide out independently of the cantilever

brackets. Just pull the front of the shelf forward. The shelf can be extended

as far as the stopper will allow but it is not removable from the cantilever ....

bracket.

Full Width Cantilever Glass Shelf

Sliding Wire Shelf

Sliding Glass Shelf

Cantilever Glass Shelf - Fixed and Sliding

Looking lnside (continued)

DOOR STORAGE

Door bins, shelves, and racks are provided for convenient

storage of jars, bottles, and cans. Frequently used items

can be quickly selected.

Some models have door racks or bins that can

accommodate gallon-sized plastic drink containers and

TALL BOTTLE RETAINER (SOME MODELS)

The Tall Bottle Retainer keeps tall containers in the bin from

falling forward when opening or closing the refrigerator door.

To install, hold the retainer at the top, and slide it over the

outside wall of the bin, as shown in the diagram. The Tall

Bottle Retainer works best with a Bin Snugger.

adjustableeconomy-sizedfor maximumjars andstoragecontainers,capacity.Some racks are

The dairy compartment, which is warmer than the general .................

food storage section, is intended for short term storage of

cheese, spreads, or butter.

Door Rack

Tall Bottle Retainer (left) and Bin Snugger (right)

SPECIAL ITEM RACK (SOME MODELS)

The innovative design of the Special Item Rack allows you

to store a six-pack of 12 ounce drink cans, a bottle of wine,

a two-liter soft drink bottle, or a carton of eggs. The Special

Item Rack mounts on the left side of your refrigerator. To

install, just slide the Special Item Rack onto any shelf as

shown in the drawing.

ADJUSTABLE DOOR BINS

Some models have adjustable door bins that can be moved

to suit individual needs.

To move door bins

1. Lift bin straight up.

2. Remove bin.

3. Place bin in desired position.

4. Lower bin onto supports until locked in place.

Special Item Rack

Adjustable Door Bin

Looking Inside. (continued)

CRISPERS (SOME MODELS)

The crispers, located under the bottom refrigerator shelf,

are designed for storing fruits, vegetables, and other fresh

produce. Wash items in clear water and remove excess

water before placing them in the crispers. Items with strong

odors or high moisture content should be wrapped before

storing.

DELl DRAWER (SOME MODELS)

Some models are equipped with a Dell Drawer for storage

of luncheon meats, spreads, cheeses, and other dell items.

DellDrawer

Crisper Drawer

HUMIDITY CONTROL (SOME MODELS)

The Humidity Control, present on some models with crisper

drawers, allows you to adjust the humidity within the crisper.

This can extend the life of fresh vegetables that keep best

in high humidity.

NOTE: Leafy Vegetables keep best when stored with the

Humidity Control set on High Humidity, or in a drawer

without a Humidity Control. This keeps incomingair to a

minimum and maintains maximum moisture content.

•o. 1

HumJdJty_

High

Humidit_

WINE RACK (SOME MODELS)

The Wine Rack stores bottles of wine, or single two-liter

plastic bottles of juice or soda pop. To install, slide the

Wine Rack onto the shelf with the curve facing in. To remove,

slide the Wine Rack out. Install on either side of shelf.

Wine Rack

Crisper Humidity Control

D Ice Service

If your refrigerator has an automatic ice maker, it will provide a sufficient

supply of ice for normal use. During the initial startup of your refrigerator.

however, no ice will be produced during the first 24 hours of operation.

Automatic ice makers are also optional accessories that may be installed n

most models at any time. Call your local dealer for information.

TURNING YOUR ICE MAKER ON

After the plumbing connections have been completed, the water supply valve

must be opened. Place the ice container under the ice maker, pushing it as

far back as possible. Lower the wire signal arm to its "down" or ON position.

New plumbing connections may cause the first production of ice cubes to be

discolored or have an odd flavor. These first cubes should be discarded until

the cubes produced are free of discoloration and taste.

TURNING YOUR ICE MAKER OFF

To stop the ice maker, lift the wire signal arm until it clicks and locks in the

"up" or OFF position. The ice maker also turns off automatically when the ice

container is full. If your model has an adjustable freezer shelf, place the shelf

in the lower position, so that the wire signal arm will hit the ice when the

container is full.

Wire

SignalArm

Ice Maker

Chemicals from a malfunctioning softener can damage the ice maker. Ifthe ice maker isconnected

to soft water, ensure that the softener is maintained and working properly.

ICE MAKER TIPS

• Ice cubes stored too long may develop an odd flavor. Empty the ice container and ensure that the wire signal arm is

in its "down" or ON position. The ice maker will then produce more ice.

• Occasionally shake the ice container to keep ice separated.

• Keep the wire signal arm in its "up" or OFF position until the refrigerator is connected to the water supply or whenever

the water supply is turned off.

• The following sounds are normal when the ice maker is operating:

• Motor running

• Ice loosening from tray

• Ice dropping into ice container

• Running water

• Water valve opening or closing

NOTE: For more information on these operations, See Normal Operating Sounds and Sights Section on page i 6.

Do Not place the ice container in your dishwasher.

• Wash the ice container in warm water with mild detergent. Rinse well and dry.

• Stop the ice maker when cleaning the freezer and during vacations.

• If the ice maker will be turned off for a long period of time, turn the water supply valve to the closed position.

Food Storage & Energy Saving Ideas

FOOD STORAGE IDEAS

Fresh Food Storage

• The fresh food compartment should be kept between 34° F and 40° F with an optimum temperature of 37° F.

• Avoid overcrowding the refrigerator shelves. This reduces the circulation of air around the food and results in uneven

cooling.

Fruits and Vegetables

• Storage in the crisper drawers traps moisture to help preserve the fruit and vegetable quality for longer time periods.

Meat

• Raw meat and poultry should be wrapped securely so leakage and contamination of other foods or surfaces does not

occur.

Frozen Food Storage

• The freezer compartment should be kept at 0° F or lower.

• A freezer operates most efficiently when it is at least 2/3 full.

Packaging Foods for Freezing

• Tominimize dehydration and quality deterioration, use aluminum foil, freezer wrap, freezer bags or airtight containers.

Force as much air out of the packages as possible and seal them tightly. Trapped air can cause food to dry out,

change color, and develop an off-flavor (freezer burn).

• Wrap fresh meats and poultry with suitable freezer wrap prior to freezing.

• Do not refreeze meat that has completely thawed.

Loading the Freezer

• Avoid adding too much warm food to the freezer at one time. This overloads the freezer, slows the rate of freezing,

and can raise the temperature of frozen foods.

• Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as possible.

• Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves. These foods are

best stored in the freezer interior where the temperature varies less.

ENERGY SAVING IDEAS

• Locate the refrigerator in the coolest part of the room, out of direct sunlight,

and away from heating ducts or registers. Do not place the refrigerator

next to heat-producing appliances such as a range, oven, or dishwasher.

Ifthis is not possible, a section of cabinetry or an added layer of insulation

between the two appliances will help the refrigerator operate more

efficiently.

Level the refrigerator so that the doors close tightly.

Refer to this Use & Care Manual for the suggested temperature control

settings.

Periodic cleaning of the condenser will help the refrigerator run more

efficiently. See the Care and Cleaning Chart on page 17.

Do not overcrowd the refrigerator or block cold air vents. Doing so causes

the refrigerator to run longer and use more energy.

Cover foods and wipe containers dry before placing them in the

refrigerator. This cuts down on moisture build-up inside the unit.

Organize the refrigerator to reduce door openings. Remove as many

items as needed at one time and close the door as soon as possible.

UNDERSTANDING THE SOUNDS YOU MAY HEAR

Your new high-efficiency refrigerator may make unfamiliar

sounds. Don't be alarmed, these are all normal sounds.

Hard surfaces, such as vinyl or wood floors, walls, and

kitchen cabinets may make sounds more noticeable. Listed

below are descriptions of some of the most common sounds

you may hear, and what is causing them.

NOTE: Rigid foam insulation is Very energy efficient,

but is not a sound insulator.

A. Evaporator

The flow of refrigerant through the evaporator may

create a boiling or gurgling sound.

B. Evaporator Fan

You may hear air being forced through the refrigerator

by the evaporator fan.

C. Defrost Heater

During defrost cycles, water dripping onto the defrost

heater may cause a hissing or sizzling sound. After

defrosting, a popping sound may occur.

IMPORTANT: During the automatic defrost cycle, you

may notice a red glow in the vents on the back wa!l of

your freezer compartment, This is normal during the

defrost cycle.

D. Automatic Ice Maker

If your refrigerator is equipped with an automatic ice

maker, you will hear ice cubes falling into the ice bin.

E. Cold Control & Defrost Timer

These parts can produce a snapping or clicking sound

when turning the refrigerator on and off. The timer also

produces sounds similar to an electric clock.

F. Condenser Fan

If condenser coils are located underneath your

refrigerator as shown in the drawing at the left, you

have a condenser fan. You may hear air being forced

through the condenser by the condenser fan.

G. Compressor

Modern, high-efficiency compressors operate much

faster than older models. The compressor may have a

high-pitched hum or pulsating sound.

H. Water Valve

If your refrigerator is equipped with an automatic ice

maker, you will hear a buzzing sound as the water valve

opens to fill the ice maker during each cycle.

L Drain Pan

You may hear water running into the drain pan during

the defrost cycle. The drain pan will be located on top

of the compressor for air-cooled condensers (black coils

on back of refrigerator).

Keep your refrigerator and freezer clean to prevent odor build-up. Wipe up any spills immediately and clean both sections

at least twice a year. Never use metallic scouring pads, brushes, abrasive cleaners or strong alkaline solutions on any

surface. Do not wash any removable parts in a dishwasher. Always unplug the electrical power cord from the wall

outlet before cleaning.

• When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may

tear or gouge the floor covering. If the refrigerator has an automatic ice maker, be careful not to move the

refrigerator beyond the plumbing connections.

Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.

To avoid damage and help the refrigerator run as efficiently as possible, clean the condenser periodically.

NOTES:

Turning the -_frigerator temperature control to"0" turns off the compressor, but does not disconnect electrical

power to the light bulb or other electrical components.

Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing

adhesive labels. Any glue left from tape or labels can be removed with a mixture of warm water and mild

detergent, or. touch the glue residue with the sticky side of tape you have already removed. Do not remove the

sedal plate.

Care & Cleaning Chart

Part Cleaning Agents Tips and Precautions

Interior/Door • Soap and water Use 2 tablespoons of baking soda in 1 quart of warm water. Be

Liner • Baking soda and sure to wring excess water out of sponge or cloth before

water cleaning around controls, light bulb or any electrical part.

Door Gaskets • Soap and water Wipe gaskets with a clean soft cloth.

Drawers/Bins • Soap and water Do not wash any removable items (bins, drawers, etc.) in

dishwasher.

Glass • Soap and water Allow glass to warm to room temperature before immersing in

Shelves • Glass cleaner warm water.

• Mild liquid sprays

Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (See

• Mild liquid sprays illustration on page 5). Vacuum backside and wipe with sudsy

• Vacuum attachment cloth or sponge. Rinse and dry.

Exterior and • Soap and water Do not use commercial household cleaners, ammonia, or alcohol

Handles to clean handles.

Exterior

(Stainless • Soap and water Clean stainless steel front with soapy water. Use ammonia on

Steel Models • Ammonia stubborn spots. Some stainless steel cleaners are Shefa Shine,

Only) • Stainless Steel trademark of Sheila Shine, Inc., and Stainless SteeIMagic,

Cleaners trademark of Magic American Corp.

Condenser • Vacuum attachment Use the dusting tool attachment on your vacuum to remove dust

Coils build-up on the condenser coils (black tubes and wires) attached

to the back of air-cooled refrigerators. A vacuum may also be used

to clean the condenser mounted underneath fan-cooled

refrigerators (see item "J" in illustration on page 16 for location).

Defrost Water • Soap and water Some models have defrost water pan located on top of

Pan compressor at bottom rear of refrigerator (see illustration on next

page). Wipe water pan with damp cloth.

Care & Cleaning (continued)

IF_=_'_T_ Avoid cuts when replacing light bulbs,

wear gloves.

REPLACING THE FREEZER LIGHT BULB

(SOME MODELS)

1. Unplug refrigerator.

2. Wear gloves as protect,on against possible broken

glass.

3. Unsnap light shield as shown.

4. Unscrew and replace old bulb with an appliance bulb

of the same wattage.

5. Replace light shield.

6. Remember to plug the refrigerator back in.

Defrost Water Pan (some models)

Vacation and Moving Tips

• Leave refrigerator operating during vacations of 3 weeks or less.

Short

• Use all perishable items from refrigerator compartment.

Vacations

• Turn automatic ice maker off, even if you will only be gone for a few days.

• Remove all food and ice if you will be gone one month or more.

• Turn controls to OFF and disconnect power.

Long • Turn off automatic ice maker and turn water supply valve to closed position.

Vacations • Clean interior thoroughly.

• Leave both doors open to prevent odors and mold build-up. Block doors open if

necessary.

• Remove all food and ice.

• If using handcart, load from side.

Moving

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

+ 41 hidden pages