Keating Of Chicago 20 TS Gas User Manual
20 TS GAS
The 20 TS Fryer is ideally suited for multi-product use.
The 20 TS allows you to cook up to 140 lbs. of frozen
french fries or 200 lbs. of chicken per hour with an input of
134,000 BTU.
KEATING SAVES OIL COSTS IN THREE WAYS:
BETTER FRY POT DESIGN
LARGER COLD ZONE
INSTANT RECOVERY
®
1. You shouldn't have to wait on the fryer. A properly
designed fry pot ensures that the fryer has recovered its
temperature before the end of the cooking cycle. Keating
“INSTANT RECOVERY”®means continuous performance.
2. The Keating frying vessel is 27% Cold Zone, the food
particles collected in the cold zone are unheated and
therefore do not carbonize and contribute to premature
shortening breakdown.
3. Keating’s INSTANT RECOVERY®feature means frying at lower temperatures (325° – 335°F) extending oil
life while enhancing product quality.
“Serving Those Who Serve The Very Best”
®
EASY TO CLEAN
Keating uses only 304 stainless steel in its frying vessel
design and polishes each vessel. The smoother the surface,
the less carbon build-up occurs, making cleaning easier. A
full 11/
4" front drain allows easy draining of oil.
SAFETY CONTROLS ENSURE SAFE AND
ACCURATE COOKING
The patented and precise thermostat controls cooking temperatures to ± 3°F. Hi-Limit control protects against the oil
and fryer overheating.
Each fryer goes through a rigorous 100% test before shipping with every component carefully checked. The actual
temperature test chart is included with each fryer.
SPECIAL ORDER OPTIONS
Keating gives you the widest range of options to ensure
your fryer is exactly suited to your needs.
INSTANT RECOVERY
®
FRYER
20 TS GAS
134,000 BTU input for cooking up to
140 lbs. of frozen french fries per hour
Instant Recovery®Fryer now even
more efficient using less energy with
our newly patented Wing Turbulators
®
Stainless Steel cabinet
Polished Stainless Steel fryer vessel
Cold Zone 27% of fryer vessel
Save on oil costs/cooks at lower
temperatures
Indicating lights and timers
Melt cycle standard
Casters Optional
20 TS GAS
KEATING OF CHICAGO, INC.
Toll Free 1-800-KEATING
www.keatingofchicago.com
As continuous product improvement occurs, specifications may be changed without notice.
INSTANT RECOVERY
®
FRYER
20 TS GAS
Printed in U.S.A. 20TS2007 7/07
Oil BTU Ship
Model No. and Description Capacity Input Height Depth Width Wt.
20 TS Nat Gas 100 lbs. 134,000 461/2"34
1
/2"21
3
/8" 240 lbs.
20 TS LP Gas 100 lbs. 132,000 461/2"34
1
/2"21
3
/8" 240 lbs.
20 Safe & Easy - - 461/2"38
5
/8"21
3
/8"-
DESCRIPTION
The Keating Instant Recovery
®
20 TS Fryer consists of a frying vessel 20" sq., having a splash deck and a splash back installed in a cabinet equipped with gas burners and an automatic temperature control
mechanism, all arranged and designed for the proper frying of food.
SPECIFICATIONS
Frying Vessel: shall have be constructed from 18 gauge stainless
steel, shall have a shortening capacity of 100 pounds, shall be
equipped with four 18 gauge horizontal heat transfer tubes
spaced above the bottom of the vessel so that the bottom is
unheated and the food particles collecting in this bottom zone
are unheated and therefore do not carbonize. The frying vessel
shall be polished to inhibit carbon build-up and facilitate easy
clean-up. The heat transfer tubes shall be 3" wide and 5" high. The
bottom of the vessel shall slope toward the front where it shall be
equipped with a 1
1
/4" Teflon core 1/4 turn, drain valve, so arranged
that the shortening can be drained into a receiving vessel placed in
front of the fryer.
Splashdeck shall slope toward the shortening containing vessel.
The splash deck shall be made of 16 gauge 304 stainless steel.
Splashback shall be made of 18 gauge 304 stainless steel, shall
completely cover the sides of the flue.
Cabinet: shall be made of 18 gauge stainless steel. The cabinet
shall be rigid in construction and shall have four 8" adjustable
legs. A door made of 22 gauge 304 stainless steel shall cover the
front of the cabinet and shall extend from the bottom of the fryer to
the panel, and above the panel shall be a canopy. The door shall be
the full width of the cabinet. No additional space is required for the
door to open a full 90 degrees. A stainless steel flue deflector is provided for installing onto the flue back.
Heat Transfer Tubes to be four, made of stainless steel polished
to a #7 mirror finish.
Thermostat shall be close range, hydraulic type and be accurate to
±3°F from 300° to 350°F with stainless steel bulb. Application of
this thermostat is patented by manually resettable type with stainless
steel bulb.
100% Safety Shut Off shall be flame switch type with combination
control gas valve.
Melt Cycle to be standard on "TS" fryers, allowing the safe melting
of solid shortening. Fryer is to be left in the Melt Cycle mode until
oil completely covers heat transfer tubes.
Indicating Lights & Switches. Power on switch, push to light
switch, fry off melt switch, ready to cook light, over max temp light.
Standard Accessories to include
two timers (programmable for
three products each),
one pair 4 mesh baskets, grid screen over heat
transfer tubes, drain clean out rod, digital timers and a sample of
Keating Klenzer and Sea Powder.
Electrical Requirements: Supply Voltage 120V 60Hz –.Control
Voltage 24V 60Hz. 120 VAC 9ft. (1.5 m) grounded cord set provided.
Gas Requirements to install are
3
/4" male NPT connection and 4"
water column pressures natural and 10" for LP gas at the fryer burner manifold. Supply pressure to fryers must be 7" (natural gas) and
11" (LP) water column.
Special Order Options may include battery, common manifold,
rear drain, casters, cover, thermostat seal, portable filter, central filter (CF20SE or above), Safe & Easy
®
filter, Instant-On™, security
package, spark ignition, basket-lift, triple size baskets, 2” drain
valve (not available on SE), and computer.
Loading...