JVC KD-S7350, KD-S690 Supplementary Manual

IMPORTANT

Notice the following information will help you to solve your problems.
Keep this IMPORTANT sheet together with the INSTRUCTIONS.

• After installing the unit

= Follow the procedure Å described below.

• If the unit does not operate

= Follow the procedure Å described below.

• If a CD is not ejected from the loading slot

= Follow the procedure ı described below. (If the procedure ı does not work, try the

procedure Å.)

• If a CD is not recognized (“NO DISC” appears on the display) even though
there is a CD in the loading slot

= Follow the procedure ı described below. (If the procedure ı does not work, try the

procedure Å.)

• If a CD is in the unit, it will eject when you reset the unit.
Pay attention not to drop the CD.

Å To reset the microcomputer

While holding SEL (select), press (standby/on/attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments—such as preset channels or sound adjustments—will also be

erased.

(standby/on/

attenuator)

SEL (select)

ı To eject a CD by force

While holding (standby/on/attenuator), press 0 (eject) for more than 2 seconds until
the CD is ejected from the loading slot.
(“EJECT” and CD-in indicator flash on the display.)

(standby/on/

attenuator)

0 (eject)

GET0153-001A