JVC KD-S611 User Manual
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
ENGLISH
DEUTSCH
KD-S611
KD-S611
COMPACT
DIGITAL AUDIO
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de desbetreffende
handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
FRANÇAIS
NEDERLANDS
GET0005-001A
[E]
Position And Reproduction Of Labels
Bottom panel of the main unit
ADVARSEL: Usynlig las erstråling ved åbning, når
sikkerhedsafbrydere er ude
af funkti on. Undgå udsættelse for stråling. (d)
ENGLISH
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e )
IMPORTANT FOR LASER
Name/Rating plate
Caution:
This product contains a laser component
of higher laser class than Class 1.
PRODUCTS
Precautions:
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when
3. CAUTION: Do not open the top cover.
4. CAUTION: This CD player uses invisible
5. CAUTION: Use of controls, adjustments or
VARNING: Osynlig laser-
strålning när denna del
är öppnad och spärren
urkopplad. Betrakta ej
strålen. (s)
VARO : Avattaessa ja suojalukitus ohitettaessa olet
är
alttiina näkymättömälle
lasersäteilylle. Älä katso
säteeseen. (f)
open and interlock failed or defeated. A void
direct exposure to beam.
There are no user-serviceable parts inside.
Leave all servicing to qualified service
personnel.
laser radiation and is equipped with safety
switches to prevent radiation emission
when unloading CDs. It is dangerous to
defeat the safety switches.
performance of procedures other than
those specified herein may result in
hazardous radiation exposure.
How to reset your unit
Press and hold both the SEL (Select) and
(Standby/On/ATT)
(Standby/On/ATT) buttons at the same time for
several seconds.
This will reset the built-in microcomputer.
NOTES:
• Your preset adjustments — such as preset channels
or sound adjustments — will also be erased.
• If a CD is in the unit, it will eject when you reset the
SEL (Select)
unit. Pay attention not to drop the CD.
Note:
For security reasons, a numbered ID card is provided with this unit, and the same ID number is
imprinted on the unit’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your unit if stolen.
BEFORE USE
For safety....
*
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
Temperature inside the car....
*
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
• Stop the car before performing any complicated
operations.
2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to
ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit.......................................................................... 2
BASIC OPERATIONS ....................................................4
RADIO OPERATIONS ................................................... 5
Listening to the radio .....................................................................5
Storing stations in memory............................................................6
FM station automatic preset:SSM ............................................... 6
Manual preset .............................................................................. 7
Tuning into a preset station ...........................................................8
Other convenient tuner functions ................................................. 9
Scanning broadcast stations ....................................................... 9
Selecting FM reception sound ..................................................... 9
CD OPERATIONS ...................................................... 10
Playing a CD ................................................................................. 10
Locating a track or a particular portion on a CD ..................... 11
Selecting CD playback modes .....................................................12
Prohibiting CD ejection ............................................................... 12
SOUND ADJUSTMENTS .............................................13
Adjusting the sound......................................................................13
Turning on/off the loudness function ...............................................
Using the Sound Control Memory (SCM)..................................15
Selecting and storing the sound modes .................................... 15
Recalling the sound modes ....................................................... 16
Canceling Advanced SCM ........................................................... 17
Storing your own sound adjustments .........................................18
14
ENGLISH
OTHER MAIN FUNCTIONS ......................................... 19
Setting the clock............................................................................ 19
Selecting the level display ............................................................ 20
Detaching the control panel ......................................................... 21
MAINTENANCE ........................................................ 22
Handling CDs................................................................................22
TROUBLESHOOTING ................................................. 23
SPECIFICATIONS ....................................................... 24
3
1
2
ENGLISH
BASIC OPERATIONS
Note:
When you use this unit for the
first time, set the built-in
clock correctly, see page 19.
3
1
Turn on the power.
Select the source.
To operate the tuner, see pages 5 – 9.
To operate the CD player, see pages 10 – 12.
2
/I/ATT
Note on One-Touch Operation:
When you select a source in step 2 below, the power automatically comes on.
You do not have to press this button to turn on the power.
C D
F M
A M
3
Adjust the volume.
Volume level indicator
Volume level appears
4
Adjust the sound as you want (see pages 13 – 18).
To drop the volume in a moment
Press briefly while listening to any source. “A TT” starts flashing on the display,
and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
To turn off the power
Press and hold for more than 1 second.
4
RADIO OPERATIONS
Listening to the radio
ENGLISH
1
2
AM
A M
F M
2
FM1 FM2
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
1
Select the band (FM1, FM2, FM3 or AM).
Y ou can select any one of FM1, FM2 and FM3 to listen to an
FM station.
selected band appears
FM3
Volume level indicator
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching:
1 Select the band (FM or AM).
Press FM or AM.
2 Press and hold
Now you can manually change the frequency while “M” is flashing.
3 Press
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM – MW/LW) until you release the button.
¢ or 4 repeatedly until the frequency you want is reached.
¢ or 4 until “M” starts flashing on the display.
5
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-station Sequential Memory)
ENGLISH
• Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2, and FM3).
1
2
1
F M
FM1 FM2 FM3
Select the FM band number (FM1, FM2 or
FM3) you want to store FM stations into.
2
Press and hold the both buttons for more than
2 seconds.
“SSM” appears, then disappears when
automatic preset is over
Local FM stations with the strongest signals are searched and stored automatically in the
band number you have selected (FM1, FM2 or FM3). These stations are preset in the number
buttons — No. 1 (lowest frequency) to No. 6 (highest frequency).
When automatic preset is over, the station stored in number button 1 will be automatically
tuned in.
6
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1
2
3
1
F M
Select the FM1 band.
2
Tune into a station of 88.3 MHz.
See page 5 to tune into a station.
ENGLISH
3
Press and hold the button for more than 2
seconds.
“P1” flashes for a few seconds.
4
Repeat the above procedure to store other stations into other
preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations ar e erased when the power supply to the memory cir cuit is interrupted (for example,
during battery replacement). If this occurs, preset the stations again.
7
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 6
ENGLISH
and 7.
1
2
1
2
AM
A M
F M
Select the band (FM1, FM2, FM3 or AM) you
want.
FM1 FM2
FM3
Select the number (1 – 6) for the preset station
you want.
8
Other convenient tuner functions
MO/RND
RPT/SCAN
Scanning broadcast stations
When you press RPT/SCAN while listening to the radio, station scanning starts. Each time a
broadcast is tuned in, scanning stops for about 5 seconds (tuned frequency number flashes
on the display), and you can check what program is now being broadcast.
If you want to listen to that program, press the same button again to stop scanning.
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you
hear becomes monaural but reception will be improved.
A
ENGLISH
Lights up when receiving an FM broadcast in stereo
To restore the stereo effect, press the same button again.
9
Loading...