JVC KD-R311, KD-R412, KD-R312, KD-R411, KD-R35 User Manual

...

ENGLISH

FRANÇAIS

KD-R412 / KD-R411 / KD-R35 / KD-R312 / KD-R311

CD RECEIVER / RÉCEPTEUR CD

For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.

For installation and connections, refer to the separate manual. / Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0624-003A

[E/EU]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and

to obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the unit while driving, be sure to look around carefully or you may be

Battery

Products

Information for Users on Disposal of Old Equipment and Batteries

[European Union only]

These symbols indicate that the product and the battery with this symbol should not be disposed as general household waste at its end-of-life. If you wish to dispose of this product and the battery, please do so in accordance with applicable national legislation or other rules in your country and municipality. By disposing of this product correctly, you will help to conserve natural resources and will help prevent potential negative effects on the environment and human health.

Notice:

The sign Pb below the symbol for batteries indicates that this battery contains lead.

involved in a traffic accident.

For safety...

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

KD-R412/KD-R411 is equipped with the steering wheel remote control function. Before operating, connect a JVC's OE remote adapter (not supplied) which matches your car to the steering wheel remote input terminal on the rear of the unit.

• For details, refer also to the instructions supplied with the remote adapter.

2 ENGLISH

How to read this manual

The following icons/symbols are used to indicate:

Press and hold the button(s)

[Hold]

until the desired operation begins.

Turn the control dial.

Turn the control dial to make a selection, then press to confirm.

( <XXXX> Menu setting item

Reference page number

XX)

Continued on the next page

How to attach/detach the control panel

How to reset your unit

Your preset adjustments will also be erased.

3 How to read this manual 3 How to attach/detach the control

panel

3 How to reset your unit 3 How to forcibly eject a disc

4 Canceling the display

demonstration

4 Setting the clock 5 Basic operations 6 Listening to the radio 8 Listening to a disc 10 Listening to the USB device

(For KD-R412/KD-R411/KD-R35)

11 Listening to the other external

components

12 Using the remote controller

(For KD-R412/KD-R411)

13 Selecting a preset sound mode 13 Menu operations 17 More about this unit 20 Maintenance 21 Troubleshooting 24 Specifications

How to forcibly eject a disc

[Hold]

• You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc,

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

3ENGLISH

Canceling the display demonstration

1 Turn on the power.

[Hold]

(Initial setting)

Setting the clock

1 Turn on the power.

3 Select <CLOCK>.

4 Select <CLOCK SET>.

5 Adjust the hour.

[Hold]

(Initial setting)

4 Select <DEMO OFF>.

6 Finish the procedure.

6 Adjust the minute.

7 Select <24H/12H>.

8 Select <24 HOUR> or

<12 HOUR>.

9 Finish the procedure.

4 ENGLISH

Basic operations

Control dialEjects the disc Loading slot

Detaches the panel

Remote sensor (for KD-R412/KD-R411) You can control this unit with an optionally purchased remote control, RM-RK50 (

When you press or hold the following button(s)...

12).

Button General operation

• Turns on.

• Selects the available sources (if the power is turned on). If the source is ready, playback also starts.

• Turns off if pressed and held.

• Adjusts the volume level.

• Selects items.

Display window

Auxiliary input jack

For KD-R412/ KD-R411/KD-R35

USB (Universal Serial Bus) input jack

• Mutes the sound while listening to a source. If the source is “CD“ or “USB,“ playback pauses. Press the control dial again to cancel muting or resume playback.

• Confirms selection.

• Selects the sound mode.

• Enters tone level adjustment directly ( 13) if pressed and held.

Enters playback mode menu directly ( 9).

• Returns to the previous menu

• Activates/deactivates TA Standby Reception

• Enters PTY Searching mode if pressed and held

Power off : Checks the current clock time Power on : Changes the display information

5ENGLISH

Listening to the radio

]

“FM” or “AM”

“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.

Manual search

“M” flashes, then press

[Hold]

the button repeatedly.

When an FM stereo broadcast is hard to receive

[Hold]

]

<TUNER> ] <MONO> ] <MONO ON> Reception improves, but stereo effect will be lost.

To restore the stereo effect, repeat the same procedure to select <MONO OFF>.

Changing the display information

Frequency = Clock = (back to the beginning)

Automatic presetting (FM)—

SSM (Strong-station Sequential Memory)

You can preset up to 18 stations for FM.

While listening to a station...

[Hold]

]

<TUNER> ] <SSM> ] <SSM 01 – 06> / <SSM 07 – 12> / <SSM 13 – 18> “SSM” flashes and local stations with the strongest signals are searched and stored automatically.

To preset another 6 stations, repeat the above procedure by selecting one of the other 6 SSM setting ranges.

6 ENGLISH

Manual presetting (FM/AM)

You can preset up to 18 stations for FM and 6 stations for AM.

Ex.: Storing FM station of 92.50 MHz into preset number “04.”

]

“92.50MHz”

“PRESET MODE” flashes.

[Hold]

]

Selects preset number “04.”

“P04” flashes and “MEMORY” appears.

Selecting a preset station

The following features are available only for FM Radio Data System stations.

Searching for your favourite FM Radio Data System programme—

You can tune in to a station broadcasting your favourite programme by searching for a PTY code.

The last selected PTY code appears.

PTY Search

[Hold]

]

Select one of your favourite

programme types or a PTY code ( 17), and start searching.

If there is a station broadcasting a programme of the same PTY code as you have selected, that station is tuned in.

Standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.

• The volume changes to the preset TA volume level if the current level is lower than the preset level ( 15).

To activate TA Standby Reception

• To activate the reception, tune in to another station providing Radio Data System signals required for TA Standby Reception.

• To deactivate the reception, press again.

If the TP indicator lights up, TA Standby Reception is activated. If the TP indicator flashes, TA Standby Reception is not yet activated.

T/P BACK

7ENGLISH

PTY Standby Reception

PTY Standby Reception allows the unit to switch temporarily to your favourite PTY programme from any source other than AM.

To activate and select your favourite PTY code for PTY Standby Reception, see “Menu

operations: <PTY-STANDBY>.” ( If the PTY indicator lights up, PTY Standby Reception is activated. If the PTY indicator flashes, PTY Standby Reception is not yet activated.

• To activate the reception, tune in to another station providing these signals.

• To deactivate the reception, select <PTY OFF> for the PTY code ( 14). The PTY indicator goes off.

14)

Tracing the same programme—

Network-Tracking Reception

When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM Radio Data System station of the same network, possibly broadcasting the same programme with stronger signals.

Programme A broadcasting on different frequency areas (01 – 05)

To change the Network-Tracking Reception setting, see “Menu operations: <AF-REG>.”

( 14)

Automatic station selection—

Programme Search

Usually when you select a preset number, the station preset in that number is tuned in. If the signals from the FM Radio Data System preset station are not sufficient for good reception, this unit, using the AF data, tunes in to another frequency possibly broadcasting the same programme as the original preset station is broadcasting.

• See “Menu operations: <P-SEARCH>.” (

Changing the display information

Station name (PS) = Station Frequency = Programme type (PTY) = Clock = (back to

the beginning)

15)

Listening to a disc

~ Ÿ

Stopping playback and ejecting the disc

“NO DISC” appears. Press /

SOURCE

another playback source.

8 ENGLISH

]

to listen to

Turn on the power.

All tracks will be played repeatedly until you change the source or eject the disc.

Prohibiting disc ejection

[Hold]

To cancel the prohibition, repeat the same procedure.

Selects folder of the MP3/WMA

Selecting the playback modes

You can use only one of the following playback modes at a time.

Selects track

Fast-forwards or

[Hold]

reverses the track

Selecting a track/folder

For MP3/WMA discs, select the desired folder, then the desired track by repeating step 2.

• To return to the previous menu, press

BACK

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

Changing the display information

Disc title/Album name/performer (folder name)* = Track title (file name)* = Current track number with the elapsed playing time

Current track number with the clock

time = (back to the beginning)

* If the current disc is an audio CD, “NO NAME”

appears.

If an MP3/WMA file does not have Tag

information or <TAG DISPLAY> is set to <TAG OFF> ( 14), folder name and file name appear.

]

“REPEAT” “RANDOM”

REPEAT TRACK RPT : Repeats current track FOLDER RPT : Repeats current folder

RANDOM FOLDER RND : Randomly plays all tracks

of current folder, then tracks of next folders

ALL RND : Randomly plays all tracks

To cancel repeat play or random play, select “RPT OFF” or “RND OFF.”

9ENGLISH

Listening to the USB device (For KD-R412/KD-R411/KD-R35)

This unit can play MP3/WMA tracks stored in a USB device.

]

Turn on the

power.

If a USB device has been attached...

Pressing playback starts from where it has been stopped previously.

• If a different USB device is currently attached,

/ SOURCE

turns on the power and

playback starts from the beginning.

Stopping playback and detaching the USB device

Straightly pull it out from the unit. “NO USB” appears. Press another playback source.

You can operate the USB device in the same way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

/ SOURCE

USB input jack

All tracks will be played repeatedly until you change the source or detach the USB device.

USB memory

Cautions:

• Avoid using the USB device if it might hinder your safety driving.

• Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

• Do not start the car engine if a USB device is connected.

• This unit may not be able to play the files depending on the type of USB device.

to listen to

• Operation and power supply may not work as intended for some USB devices.

• You cannot connect a computer to the USB input terminal of the unit.

• Make sure all important data has been backed up to avoid losing the data.

• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

• Some USB devices may not work immediately after attaching USB device or turn on the power.

• For more details about USB operations, see page 19.

10 ENGLISH

Listening to the other external components

You can connect an external component to the AUX (auxiliary) input jack on the control panel. Preparation: Make sure <AUX ON> is selected for the <SRC SELECT> ( 16)

• For details, refer also to the instructions supplied with the adapter or external components.

Connecting an external component to the AUX input jack

<AUX IN> setting.

3.5 mm stereo mini plug (not supplied)

]

“AUX IN”

Ÿ Turn on the connected component

and start playing the source.

]

Adjust the volume.

⁄ Adjust the sound as you

( 13)

want.

Portable audio player,

etc.

11ENGLISH

Using the remote controller

KD-R412/KD-R411 can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK50 with your unit.

Installing the lithium coin battery (CR2025)

• Turns the power on if pressed briefly.

• Turns the power off if pressed and held.

Caution:

• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

• Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

If the effectiveness of the remote controller decreases, replace the battery.

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Remote sensor

12 ENGLISH

• Changes the preset stations.

• Changes the folder of the MP3/WMA.

Adjusts the volume level.

Selects the sound mode.

Selects the source.

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

• Changes the tracks if pressed briefly.

Warning (to prevent accidents and damage):

• Do not install any battery other than CR2025 or its equivalent.

• Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

• Store the battery in a place where children cannot reach.

• Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

• Do not leave the battery with other metallic materials.

• Do not poke the battery with tweezers or similar tools.

• Wrap the battery with tape and insulate when throwing away or saving it.

(For KD-R412/KD-R411)

When the power is on, pressing the button also mutes the sound or pauses. To cancel muting or resume playback, press the same button again.

pressed and held.

Selecting a preset sound mode

You can select a preset sound mode suitable for the music genre.

FLAT = NATURAL = DYNAMIC = VOCAL

BOOST the beginning)

While listening, you can adjust the tone level of the selected sound mode.

BASS BOOST = USER = (back to

[Hold]

Storing your own sound mode

You can store your own adjustments in memory.

[Hold]

]

<PRO EQ> ] <BASS> / <MIDDLE> /

Adjust the level (–06 to +06) of the selected tone (BASS / MIDDLE / TREBLE). The sound mode is automatically stored and changed to “USER.”

The current sound mode changes to “USER” automatically.

Menu operations

1 2 3

JVC KD-R311, KD-R412, KD-R312, KD-R411, KD-R35 User Manual

KD-R412 / KD-R411 / KD-R35 / KD-R312 / KD-R311

INSTRUCTIONS

IMPORTANT FOR LASER PRODUCTS

CONTENTS

Canceling the display demonstration

Setting the clock

Basic operations

Listening to the radio

Listening to a disc

Listening to the USB device (For KD-R412/KD-R411/KD-R35)

Listening to the other external components

Selecting a preset sound mode

Menu operations