JVC KD-LH911, KD-LH917 User Manual
CD/SD RECEIVER
RECEPTEUR CD/SD
KD-LH911
For canceling the display demonstration, see page 9.
Pour annuler la démonstration des affichages, référez-vous à la page 9.
ENGLISH
FRANÇAIS
For installation and connections, refer to the separate manual.
Pour l’installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
GET0275-003A
[EX/EU]
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
ENGLISH
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
Warning:
If you need to operate the receiver while
driving, be sure to look ahead carefully or
you may be involved in a traffic accident.
How to reset your unit
Cautions:
If the temperature inside the car is below
0°C, the movement of animation and text
scroll will be halted on the display to prevent
the display from being blurred.
appears on the display.
When the temperature increases, and the
operating temperature is resumed, these
functions will start working again.
Note: Only for [EX] model users in UK and European countries
For security reasons, a numbered ID card is provided with this receiver, and the same ID number is
imprinted on the receiver’s chassis. Keep the card in a safe place, as it will help the authorities to
identify your receiver if stolen.
This will reset the microcomputer. Your
preset adjustments will also be erased.
2
Contents
How to reset your unit ........................... 2
How to read this manual ........................ 4
How to forcibly eject a disc ................... 4
How to change the display pattern ........ 5
How to enter the various menus ............ 5
Control panel — KD-LH911 ........ 6
Parts identification ................................. 6
Remote controller —
RM-RK300 ............................. 7
Main elements and features ................... 7
Getting started ....................... 8
Basic operations .................................. 8
Canceling the display demonstrations ... 9
Setting the clock .................................... 9
Radio operations ................... 10
Listening to the radio ........................... 10
Storing stations in memory .................... 11
Listening to a preset station ................... 12
FM RDS operations ................. 13
Searching for your favorite FM RDS
programme
Storing your favorite programmes ......... 14
Using the standby receptions ................. 15
Tracking the same programme—
Network-Tracking Reception ............ 16
....................................... 13
Disc/SD card operations ......... 17
Playing a disc in the receiver ................ 17
Playing discs in the CD changer ............ 18
Playing an SD card .............................. 19
Other main functions ............................. 21
Selecting the playback modes ................ 23
Sound adjustments ................ 25
Setting the basic sound selection
menu — SEL ................................... 25
Selecting preset sound modes
(i-EQ: intelligent equalizer) ............... 27
Storing your own sound modes ............. 27
Graphic displays .................... 29
Basic procedure ................................... 29
Downloading the files ............................ 30
Deleting the files .................................... 31
Activating the downloaded files ............ 33
General settings — PSM ......... 34
Basic procedure ..................................... 34
Selecting the dimmer mode ................... 38
Changing the display color .................... 39
Other main functions ............. 41
Assigning titles to the sources ............... 41
Changing the control panel angle .......... 42
Detaching the control panel ................... 42
External component operations
... 43
Playing an external component ............ 43
DAB tuner operations
................ 44
Listening to the DAB tuner ................... 44
Storing DAB services in memory .......... 46
Tuning in to a preset DAB service ........ 46
Using the standby reception .................. 47
Tracing the same programme
—Alternative Reception
..................... 48
Maintenance .......................... 49
More about this receiver ........ 50
Troubleshooting ..................... 54
Specifications ......................... 57
ENGLISH
*For safety....
• Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
• Stop the car before performing any
complicated operations.
*Temperature inside the car....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
3
How to read this manual
The following methods are used to make the
explanations simple and easy-to-understand:
• Some related tips and notes are explained in
ENGLISH
“More about this receiver” (see pages
50 – 53).
• Button operations are mainly explained with
the illustrations as follows:
Press briefly.
How to forcibly eject a disc
If a disc cannot be recognized by the receiver or
cannot be ejected, ejects the disc as follows.
• If an SD card is inserted, ejects the SD card
first (see page 19).
1
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
The following marks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
2
• If this does not work, reset your receiver.
• Be careful not to drop the disc when it
ejects.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
: SD player operations.
4
How to change the display pattern
How to enter the various menus
The main menu contains six menus (MODE,
PSM, SEL, PICT, EQ, TITLE).
Ex.: When tuner is selected as the source
Source display pattern /
Audio level meters
Clock display pattern
Graphic screen appears only after
you have downloaded a file,
(see pages 29 – 33).
1
ENGLISH
2 Move the cursor to select a menu you
want (MODE, PSM, SEL, PICT, EQ,
TITLE).
*
• To go back to the previous screen, press
BACK.
* Works as time countdown indicator.
3 Enter the selected menu.
Ex.: When MODE menu is selected
• To go back to the MENU screen, press
MENU.
4 Operate as instructed on the screen.
5
Control panel — KD-LH911
Parts identification
ENGLISH
1 + / – button
2 (standby/on attenuator) button
3 5 (up) button
4
4/¢ buttons
5 Display window
6 T/P (traffic programme/programme type)
button
7 0 (eject) button
(angle) button
8 SOURCE button
9 OK button
p Reset button
q ∞ (down) button
w Remote sensor
• DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
e MENU button
r DISP (display) button
t BACK button
y
(control panel release) button
u BAND button
6
Remote controller — RM-RK300
Installing the lithium coin battery
(CR2025)
• When operating, aim the remote controller
directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.
Warning:
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Caution:
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
Main elements and features
ENGLISH
1 (standby/on/attenuator) button
• Turns on and off the power and also
attenuates the sound.
2 SOURCE button
• Selects the source.
3 5 (up) / ∞ (down) buttons
• Changes the preset stations.
• Changes the services for DAB.
• Changes the MP3/WMA folders.
4 VOL (volume) + / – buttons
• Adjusts the volume level.
5 Number buttons
• Selects the preset station (or service) if
pressed, or store a station (or a service) if
pressed and held.
• Selects the tracks while playing an audio
CDs or CD Text.
• Selects the folders while playing
MP3/WMA discs or an SD card.
• Selects the discs while operating the CD
changer.
6 ANGLE button
• Adjusts the control panel angle.
7 BAND button
• Selects the band for FM/AM and DAB.
8 4 / ¢ buttons
• Searches for stations (or ensembles) if
pressed, or skips frequencies after pressed
and held.
• Changes the tracks of the disc or of the
SD card if pressed.
• Fast-forwards or reverses the track if
pressed and held.
7
Getting started
ENGLISH
Basic operations
~
Ÿ
You cannot select some sources if they
are not ready.
! • For FM/AM tuner only
• For DAB tuner only
⁄ Adjust the volume.
To show the level meter (see page 36).
@ Adjust the sound as you want.
(See pages 25 – 28.)
To drop the volume in a moment (ATT)
To restore the sound,
press it again.
To turn off the power
8
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: Demo]—see page 34.
1 Enter the PSM menu (see page
2 Select “Off.”
• Make sure “Demo/Link” is shown
on the display. If not, press 5 or ∞.
3 Exit from the setting.
5).
Setting the clock
1 Enter the PSM menu (see page
2 Set the hour, minute, and clock
system.
1 Select “Clock Hr” (hour), then
adjust the hour.
2 Select “Clock Min” (minute), then
adjust the minute.
3 Select “24H/12H,” then select
“24Hours” or “12Hours.”
3 Exit from the setting.
5).
ENGLISH
To activate the display demonstration
In step 2 above, select “Demo” or
“Image Link.” For more details, see page 34.
To check the current clock time when the
power is turned off
9
Radio operations
ENGLISH
Listening to the radio
~
Ÿ
Clock display
! Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same
button again.
To tune in to a station manually
In step ! on the left...
1
2 Select the desired station frequencies.
10
When an FM stereo broadcast is hard to
receive
1 Enter the MODE menu (see page 5).
2 Select “Mono.”
3 Select “On.”
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
2
Select the FM band (FM1 – FM3)
you want to store into.
ENGLISH
Reception improves, but stereo effect will
be lost.
4 Exit from the setting.
To restore the stereo effect, repeat the same
procedure and select “Off” on step 3.
3 Enter the MODE menu (see page
5).
4 Select “SSM.”
5
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
11
Manual presetting
Ex.: Storing FM station of 92.5 MHz into the
preset number 4 of the FM1 band.
ENGLISH
1
2
3
• By holding 5/∞, the Preset Station List
will also appears (see step 7 below).
4 Enter the MODE menu (see page
5 Select “List.”
8 Store the station.
Listening to a preset station
1
2
5).
3 Perform steps 4 to 7 (on left column)
to enter the Preset Station List.
6
7 Select a preset number.
• If the current band is FM, you can move to
the lists of the other FM bands by pressing
4/¢.
12
4
FM RDS operations
Searching for your favorite FM RDS programme
You can tune in to a station broadcasting your
favorite programme by searching for a PTY code.
•
To store your favorite programme, see page
14.
~
Ÿ Select a PTY code.
ENGLISH
! Start searching for your favorite
programme.
If there is a station broadcasting a
programme of the same PTY code as
you have selected, that station is tuned
in.
• You can move to the other lists by
pressing 4/¢.
13
What you can do with RDS
RDS (Radio Data System) allows FM
stations to send an additional signal along
with their regular programme signals.
ENGLISH
By receiving the RDS data, this receiver can
do the following:
•
Programme Type (PTY) Search (see page 13)
• Temporarily switches to Traffic
Announcement—TA Standby Reception.
(See page 15.)
• Temporarily switches to your favorite
programme—PTY Standby Reception. (See
pages 14 – 16, and 36.)
•
Tracing the same programme automatically
—Network-Tracking Reception (see page 16)
• Programme Search (see page 36)
PTY codes
News, Affairs, Info, Sport, Educate, Drama,
Culture, Science, Varied, Pop M (music),
Rock M (music), Easy M (music),
Light M (music), Classics, Other M
(music), Weather, Finance, Children, Social,
Religion, Phone In, Travel, Leisure, Jazz,
Country, Nation M (music), Oldies, Folk M
(music), Document
2 Select a PTY code.
• You can move to the other lists by
pressing 4/¢.
3
4 Select a preset number.
Storing your favorite programmes
You can store six favorite programme types.
Preset programme types:
1
14
5 Store the setting.
6 Repeat steps 2 to 5 to store other
PTY codes into other preset
numbers.
7 Exit from the setting.
Using the standby receptions
TA Standby Reception
TA Standby Reception allows the receiver to
switch temporarily to Traffic Announcement
(TA) from any source other than AM.
• If a station starts broadcasting a traffic
announcement, “Traffic News” appears on the
display, and this receiver temporarily tunes
in to the station. The volume changes to the
preset TA volume level (see page 36).
To activate TA Standby Reception
TP indicator appears.
• If the TP indicator lights up, TA Standby
Reception is activated.
• If the TP indicator flashes, TA Standby
Reception is not yet activated. (This occurs
when you are listening to an FM station
without the RDS signals required for TA
Standby Reception.)
To activate TA Standby Reception, tune in to
another station (or service) providing these
signals. The TP indicator will stop flashing
and remain lit.
PTY Standby Reception
PTY Standby Reception allows the receiver
to switch temporarily to your favorite PTY
programme from any source other than AM.
• This function also takes effect for the DAB
tuner.
To select your favorite PTY code for PTY
Standby Reception, see page 36.
The PTY indicator either lights up or flashes.
To activate the PTY Standby Reception
1 Enter the MODE menu (see page 5).
2 Select “PTY.”
3 Select one of the PTY codes (see page
14).
ENGLISH
To deactivate the TA Standby Reception
The TP indicator goes off.
To be continued...
15
4 Exit from the setting.
Tracking the same programme—
Network-Tracking Reception
ENGLISH
PTY indicator appears.
• If the PTY indicator lights up, PTY
Standby Reception is activated.
• If the PTY indicator flashes, PTY Standby
Reception is not yet activated.
To activate PTY Standby Reception, tune
in to another station (or service) providing
these signals. The PTY indicator will stop
flashing and remain lit.
To deactivate the PTY Standby Reception
Select “Off” in step 3 on page 15.
The PTY indicator goes off.
When driving in an area where FM reception
is not sufficient enough, this receiver
automatically tunes in to another FM RDS
station of the same network, possibly
broadcasting the same programme with stronger
signals (see the illustration below).
When shipped from the factory, NetworkTracking Reception is activated.
To change the Network-Tracking Reception
setting, see “AF-Regn’l” on page 36.
Programme A broadcasting on different
frequency areas (01 – 05)
16
Disc/SD card operations
Playing a disc in the receiver
ENGLISH
All tracks will be
played repeatedly until
you change the source
or eject the disc.
About MP3 and WMA discs
MP3 and WMA (Windows Media® Audio)
“tracks” (words “file” and “track” are used
interchangeably) are recorded in “folders.”
• When an MP3 or a WMA folder includes
an image <jll> file edited by Image
Converter (Wide Ver 1.2)—supplied in the
CD-ROM, you can show the image on the
display while the tracks in the folder are
played back—Image Link. (See pages 19,
34, and 52 for details.)
• When inserting an MP3 or a WMA disc:
1
*
Clock display
Total folder number
Current folder
number
File type
Total track number
Current
track
number
Elapsed
playing
time
• When inserting an audio CD or a CD Text
disc:
Total track number
Clock display
Disc name
1
*
Either the MP3 or WMA indicator lights up
*
Track name*
Total playing
time
Current track
3
number
3
depending on the detected file.
2
*
The album name/performer with indicator
and the track title with
indicator will
appear if “ID3 Tag” is set to “On” (see
page 36).
3
*
Appear only for CD Texts and CDs if it has
been assigned or recorded. (“No Name”
appears for a while if no name is recorded
or assigned to an audio CD.)
To stop play and eject the disc
To return the control panel to
its previous position, press it
again.
Track name*
2
Folder name
2
*
17
ENGLISH
Playing discs in the CD changer
About the CD changer
It is recommended to use the JVC MP3compatible CD changer with your receiver.
• You can also connect other CH-X series
CD changers (except CH-X99 and
CH-X100). However, they are not
compatible with MP3 discs, so you cannot
play back MP3 discs.
• You cannot use the KD-MK series CD
changers with this receiver.
• Disc text information recorded in the CD
Text can be displayed when a JVC CD
Text compatible CD changer is connected.
• You cannot control and play any WMA
disc in the CD changer.
All tracks of the inserted discs in the magazine
will be played repeatedly until you change
the source or eject the magazine from the CD
changer.
~
*
If you have changed “Ext Input”
setting to “Ext In” (see page 37), you
cannot select the CD changer.
• When the current disc is an MP3 disc:
Clock display
Current
disc
number
Current
folder
number
Track name*
Current
track
number
1
Folder name*
• When the current disc is an audio CD or a
CD Text disc:
Current disc
number
1
*
The album name/performer with indicator
Disc
name*
Track name*
and the track title with
Current track
2
number
2
indicator will
appear if “ID3 Tag” is set to “On” (see
page 36).
2
*
Appear only for CD Texts and CDs if it has
been assigned or recorded. (“No Name”
appears for a while if no name is recorded
or assigned to an audio CD.)
1
18
Playing an SD card
ENGLISH
About the SD card
You can play back MP3/WMA tracks
recorded on the SD card and show the stored
image on the display during playback—
Image Link. (See pages 17, 34, and 52 for
details.)
The required SD recording format is FAT
12/16 and the recommended storage type is
8 MB to 512 MB.
• You cannot use MMC or mini SD with this
receiver.
Before detaching the control panel, turn off the
power.
~ Detach the control panel.
Ÿ
SD loading slot
SD card
Press in the SD card until you hear a
clicking sound.
To eject the SD card, press the SD
card again.
To be continued....
19
! Attach the control panel.
ENGLISH
⁄ • The control panel goes
back to the previous
position (see page 42).
If an SD card has been loaded....
1
2
Current folder
number
Current
track
number
Elapsed
playing
time
Clock display
Current
Current folder
number
Track name*
Playback starts automatically if tracks
are recorded.
track
number
Elapsed
playing
time
Folder name
Track name*
* The album name/performer with
indicator and the track title with
indicator will appear if “ID3 Tag” is
set to “On” (see page 36).
*
Folder name
*
20
To fast-forward or reverse the track
Fast-forwards.
Other main functions
Selecting a disc/folder/track on the
list
ENGLISH
Reverses.
To go to the next or previous tracks
To the following
tracks.
To the beginning of the current track, then
the previous tracks.
To go to the next or previous folders (only
for MP3 and WMA tracks)
For MP3 tracks:
For WMA tracks:
To next folders.
1 Enter the MODE menu (see page
2 Select “List.”
3 Select the list type—“Disc,”*
“Folder,”*2 or “File.”*
*1 Selectable only when the source is
“CD-CH.”
2
*
Selectable only for MP3/WMA disc or
SD card.
1 When “Disc” is selected:
1
2
5).
To previous folders.
: Holding these buttons can
display the Disc List (see next
column).
: Holding these buttons can
display the Folder List (see page
22).
Disc List appears.
• You can move to the other lists by
pressing 4/¢ (5/∞).
To be continued....
21
To start playback.
When using the remote controller....
• If you select the current MP3 disc
ENGLISH
(highlighted on the display), its Folder
List appears.
2 When “Folder” is selected:
Folder List appears.
• You can move to the other lists by
pressing 4/¢ (5/∞).
To start playback.
• If you select the current folder
(highlighted on the display), its File List
appears.
3 When “File” is selected:
• To directly select a disc in the CD
changer
• To directly select a track of an audio CD
or a CD Text
• To directly select a folder of an
MP3/WMA disc or an SD card
To select a number from 1 – 6:
To select a number from 7 (1) – 12 (6):
It is required that folders are assigned with
2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
File List appears.
• You can move to the other lists by
pressing 4/¢ (5/∞).
To start playback.
22
Prohibiting disc ejection
You can lock a disc in the loading slot.
Selecting the playback modes
1
2 Select “No Eject ?.”
“No Eject” flashes, and the disc cannot be
ejected.
To cancel the prohibition
Repeat the same procedure, press OK in step 2
after making sure that “Eject OK ?” is selected
(highlighted).
“Eject OK” flashes.
You can use only one of the following playback
modes at a time.
1 Enter the MODE menu (see page
5).
2 Select one of the playback modes —
“Intro,” “Repeat,” or “Random.”
3 Select your desired playback modes.
For details, see table
on page 24.
4 Finish the procedure.
ENGLISH
To be continued...
To be continued...
23
Intro play
ENGLISH
Ex.: When “Track Intro” is selected while
Repeat play
Ex.: When “Track Repeat” is selected
Random play
Ex.: When “Disc Random” is selected
1
*
Only while playing MP3 ( / / ) or WMA ( / )
track.
2
Only while playing discs in the CD changer ( ).
*
playing an MP3 disc in the receiver
while playing an MP3 disc in the
receiver
while playing an MP3 disc in the
receiver
Mode Plays the beginning 15 seconds of...
Trac k: All tracks of the current disc or the
SD card.
• While playing,
lights
up.
Folder*
1
: First tracks of all folders of the
current disc or the SD card.
• While playing,
lights
up.
2
Disc*
: First tracks of all the inserted discs.
• While playing,
lights
up.
Off: Cancels.
Mode Plays repeatedly
Trac k: The current track.
• While playing,
lights
up.
Folder*
• While playing,
1
: All tracks of the current folder.
lights
up.
2
Disc*
: All tracks of the current disc.
• While playing,
lights
up.
Off: Cancels.
Mode Plays at random
Folder*1: All tracks of the current folder, then
tracks of the next folder and so on.
• While playing,
up.
Disc or SD: All tracks of the current disc or the
SD card.
• While playing,
lights up.
2
All*
: All tracks of the inserted discs.
• While playing,
up.
Off: Cancels.
lights
or
lights
24
Sound adjustments
Setting the basic sound selection menu — SEL
You can adjust the sound characteristics to your
preference.
ENGLISH
! Adjust the selected setting item.
A Fad/Bal
~ Enter the SEL menu (see page
5).
Ÿ Select a setting item—“Fad/Bal,”
“Subwoofer,” “VolAdjust,” or
“Loudness.”
When selecting “Fad/Bal” and
“Subwoofer,” press OK to enter the
selected menu.
1 To adjust the speaker output
balance between the front and
rear speakers —Front to Rear.
2 To adjust the speaker output
balance between the left and right
speakers—Left to Right.
3
To be continued...
25
B Subwoofer
ENGLISH
C VolAdjust
1 To select the cutoff frequency to
the subwoofer.
55Hz:
85Hz:
115 H z:
2
Adjust the subwoofer output level.
3
Frequencies higher
than 55 Hz are cut off
to the subwoofer.
Frequencies higher
than 85 Hz are cut off
to the subwoofer.
Frequencies higher
than 115 Hz are cut off
to the subwoofer.
0 (min.)
to 8 (max.)
To adjust the input level of each
source (except FM).
Adjust to match the input level to the
FM sound level.
–5 (min.)
to
+5 (max.)
D Loudness
To adjust the loudness to produce a
well-balanced sound at low volume
levels.
On/Off
⁄ Exit from the setting.
26
Selecting preset sound modes
(i-EQ: intelligent equalizer)
You can select a preset sound mode suitable to
the music genre.
Available sound modes
Flat (No sound mode is applied),
Hard Rock, R&B (Rhythm&Blues),
Pop, Jazz, Dance, Country, Reggae,
Classic, User 1, User 2, User 3
3
4 Select the sound elements to adjust.
A Adjust the enhancement level
1 Select “Low,” “Mid,” or
“High.”
ENGLISH
1 Enter the EQ menu (see page
5).
2 Select a sound mode.
Ex.: When “Flat” is selected
3 Exit from the setting.
Storing your own sound modes
You can adjust the sound mode and store your
own adjustments in memory.
2 Adjust the level (–06 to +06).
3
B Select a center frequency
1 Enter the EQ menu (see page
5).
2 Select a sound mode (see step 2
above)
.
To be continued...
27
C Select a band width
5 Repeat step 4 to adjust the other
frequency bands.
ENGLISH
• Pressing OK button, will go back to
Indication
Preset values
Low Mid High
Level –06
Center
frequency
Q (Band
width)
the beginning display.
(min.)
to
+06
(max.)
60 Hz
80 Hz
100 Hz
120 Hz
Q 0.5
Q 0.75
Q 1.0
Q 1.25
–06
(min.)
to
+06
(max.)
Fix 8 kHz
Q 1.0
Q 1.85
–06
(min.)
to
+06
(max.)
10 kHz
12 kHz
15 kHz
Fix
6 Store the adjustments.
1
2
Ex.: When “User 1” is selected
The list below shows the preset value settings for each sound modes:
Preset values
Indication
Level
Flat 00 60 Hz Q 0.5 00 Q 1.0 00 8 kHz
Hard Rock +03 120 Hz Q 1.25 00 Q 1.0 +02 8 kHz
R&B +03 80 Hz Q 0.5 +01 Q 1.0 +03 15 kHz
Pop +02 120 Hz Q 0.5 +01 Q 1.0 +02 10 kHz
Jazz +03 80 Hz Q 0.5 00 Q 1.0 +03 10 kHz
Dance +04 60 Hz Q 0.75 –02 Q 1.85 +01 8 kHz
Country +02 60 Hz Q 1.0 00 Q 1.0 +02 12 kHz
Reggae +03 60 Hz Q 0.5 +02 Q 1.0 +02 12 kHz
Classic +01 80 Hz Q 0.5 00 Q 1.0 +03 10 kHz
28
Low Mid High
Center
frequency
Q (Band
width)
Level
Q (Band
width)
Level
Center
frequency
Graphic displays
Basic procedure
Before starting the following procedure,
prepare a CD-R or an SD card including still
images (pictures) and animations (movies).
• With Image Converter (Wide Ver 1.2)
included in the supplied CD-ROM, you can
create your own images and animations.
(Samples are included in the CD-ROM.)
~ Insert a CD-R, an SD card, or
supplied CD-ROM.
• CD-R/supplied CD-ROM
ENGLISH
! Select the item.
Ex.: When “Delete” is selected
• SD card
Ÿ Enter the PICT menu (see page
5).
• To download the file(s):
\ “Download” (see page 30)
• To delete the file(s):
\ “Delete” (see page 31)
• To delete all files:
\ “All Delete” (see page 32)
• To activate the file(s):
\ Activating the downloaded files
(see page 33)
To be continued....
29
IMPORTANT:
• Refer also to Image Converter PDF files
included in the “Manual” folder of the
supplied CD-ROM.
ENGLISH
• Still images (pictures) should have <jll>,
and animations (movies) should have
<jla> as their extension code in their file
names.
• Before you download or delete the files,
observe the following:
– Do not download a file while driving.
– Do not turn off the ignition key of the
car while downloading or deleting a
file.*
– Do not detach the control panel while
downloading or deleting a file.*
* If you do so, the file download or deletion
will not be done correctly.
Downloading pictures or an
animation
• It takes a long time to download an animation.
For details, see page 53.
• To activate the downloaded files, see page 33.
1 In step ! on page 29, select
“Download.”
2 Select the screen type —“Picture,”
“Movie,” “Opening,” or “Ending.”
1
Ex.: When “Picture” is selected
Downloading the fi les
• Picture: Graphic screen
To download/delete still images (30 still
images at maximum) which will be shown
while playing a source.
• Movie: Graphic screen
To download/delete an animation (90 frames
at maximum) which will be shown while
playing a source.
• Opening: Opening screen
To download/delete an animation (30 frames
at maximum) which will be shown after the
receiver is turned on.
• Ending: Ending screen
To download/delete an animation (30 frames
at maximum) which will be shown before the
receiver is turned off.
30
2
3 Select a folder.
1
2
Loading...