JVC KD-HDR20 User Manual
KD-HDR20
HD Radio®/CD Receiver
Headunits
20W x 4
RMS
Front AUX
AUDIO
USB
SAT
Radio Ready
Built-in
HD Radio
Tuner
Hi-Volt
Line Output
®
MOS-FET
50W x 4
Ready for
iPodAdapter
MP3/WMA
Recommended Features
Ready for
Bluetooth
Adapter
Key Benefits
The built-in HD Radio® tuner offers a multitude of programs in premium digital sound. The unit also has DiAS digital
processing tuner for high quality FM radio. The front AUX-IN lets you easily play songs from digital audio players.
You can easily operate just by using the menu key and the volume dial. Enjoy superior sound with MOS-FET power amp
and 24-bit DAC, and even customize the sound with 7-band parametric iEQ. You can also enjoy Bluetooth® Wireless
Technology and iPod with optional adapters.
Built-in HD Radio
Enjoy a multitude of HD Radio®
programs in premium digital
sound, without having to connect
external tuners. FM radio sounds
equivalent to CD quality, and AM
as good as FM.
®
J-BUS Terminal
You can connect JVC’s optional
adapters or changers to this
terminal. Available functions
depend on the headunit.
KS-BTA200
KS-PD100
iPod
KD-HDR20
HD Radio®/CD Receiver
DiAS II Digital Tuner
This all-digital, further evolved version of DiAS tuner delivers versatile next generation
performance. Its advantages include the higher sensitivity 13µV AM reception,
improved FM separation from 40dB to 50dB, and better Multipath Noise Canceller for
FM reception while driving.
Single-Chip Radio DSP
FM/AM FE
IF/NC/MPX
Digital Processing
Digital
Connection
CD
Advanced Design for High-Quality Sound
JVC-original sound quality design with
the state-of-the-art circuit and board layout
features less resistance and distortion from
the source signal. Hear the original sound,
just as it is.
THD
0.025
0.005
2008 Model KD-HDR50
KD-HDR20
Ready for Bluetooth® Adapter
Bluetooth® Wireless Technology is available with an optional adapter (KS-BTA200)*,
for hands-free calling and audio streaming.
* Not available in some countries.
Available functions depend on the cell phone.
KS-BTA200
(optional)
Cell phone
Advanced Multi-bit DAC
The Multi-bit system achieves a wide dynamic range. Its unique algorithm
contributes to improved linearity and low distortion. Moreover, its incorporated
Switched Capacitor Filter minimises the signal deterioration caused by clock jitter,
enabling stable D/A conversion. As a result, even subtle nuances of music can be
reproduced in fine detail.
7-Band iEQ
Boost or cut the level by up to 10dB on each of
7 bandwidths (60,150, 400,1k, 2.4k, 6k and 15kHz).
Even customize the overall response with the 7-Band
iEQ, which offers 1 user- and 5 factory-preset
patterns. (POPS, ROCK, HIPHOP, JAZZ, and CLASSIC)
EQ Control Range 60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 15kHz
Level –10 - +10dB
POPS
JAZZ
ROCK
CLASSIC
HOP
USER
Ready for iPod Adapter (Ready for KS-PD100)
With an optional KS-PD100 adapter,
you can connect and control your iPod
on the headunit.
KS-PD100
(optional)
HIP
iPod
Key Specifications
Maximum Power Output 50W x 4
Continuous Power Output (RMS) 20W RMS x 4 Channels at 4Ω
* Total Harmonic Distortion ; 1.0% THD* + N
Line Preout Terminals (Pair) 1 pair
Subwoofer Output with
Level/Frequency Control
✔
Line Output Level 2.5V
Subwoofer Output Level 2.5V
Subwoofer Gain Control 0 - 16dB
Load Impedance 4Ω (4 - 8Ω allowable)
Line Output Impedance 1kΩ
Dimentions (W x H x D)
Installation Size 7
Panel Size 7
Detachable Face Plate 6
3/16
7/16
3/4
” x 2
” x 2
” x 1
1/16
5/16
” x 6
5/16
13/16
” 182 x 52 x 159.5 mm
1/4
” x
” 188 x 58 x 5.6 mm
3/4
” x
” 176 x 46 x 18.8 mm
Compatible iPod/iPhone Models
Requires
KS-PD100
Requires
KS-PD100
Requires
KS-PD100
Requires
KS-PD100
Requires
KS-PD100
Connections
Requires
KS-PD100
KS-BTA200
J-BUS
KS-PD100
AUX-IN
Requires
KS-PD100
Requires
KS-PD100
* **
Requires
KS-PD100
iPod
Portable Audio Players
Requires
KS-PD100
* With J-BUS connection, KS-PD100 may hang up while using iPod nano 2nd generation.
** iPod battery will not be charged via connection with KS-PD100.
NTK-9520-07
Loading...