JVC KD-DV8306, KD-DV8305 Instructions Manual

DVD/CD RECEIVER

KD-DV8306/KD-DV8305

ENGLISH

ALAT PENERIMA DVD/CD

For canceling the display demonstration, see page 7. Untuk membatalkan tampilan demonstrasi, lihat halaman 7.

For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.

KD-DV8306/KD-DV8305

INDONESIA

INSTRUCTIONS

BUKU PETUNJUK

GET0454-003A

[UN]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

ENGLISH

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Caution for DualDisc playback

[European Union only]

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Caution on volume setting

Digital devices (DISC/USB) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level.

Caution

If the temperature inside the car is below 0°C, the movement of animation and text scroll will be halted on the display to prevent the display from being blurred.

appears on the display. When the temperature increases, and the operating temperature is resumed, these functions will start working again.

How to reset your unit

• Your preset adjustments will also be erased.

How to forcibly eject a disc

“Please Eject” appears on the display.

WARNINGS: To prevent accidents and damage

• DO NOT install any unit in locations where;

– it may obstruct the steering wheel and

gearshift lever operations.

– it may obstruct the operation of safety

devices such as air bags.

– it may obstruct visibility.

• DO NOT operate the unit while driving.

• If you need to operate the unit while

driving, be sure to look around carefully.

• The driver must not watch the monitor

while driving.

If the parking brake is not engaged,

“DRIVER MUST NOT WATCH THE MONITOR WHILE DRIVING.” appears on the monitor, and no playback picture will be shown. – This warning appears only when the

parking brake wire is connected to the parking brake system built into the car (refer to the Installation/Connection Manual).

ENGLISH

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit.

Indication language:

In this manual, English indications are used for the purpose of explanation. You can select the indication language on the monitor in the “LANGUAGE” settings (see page 40).

• You can also select the indication language on the display while playing a CD Text, MP3, WMA, or WAV file. See “Language” on page 36 for setting.

How to use the M MODE and SEL buttons

If you use M MODE or SEL (select), the display and some controls (such as the number buttons,

4/¢ buttons, 5/∞ buttons, and the

control dial) enter the corresponding control mode.

ENGLISH

Ex.: When you press number button 1 after

pressing M MODE, to operate the FM tuner.

Works as time countdown indicator.

To use these controls for original functions again, wait for 15 seconds without pressing any of these buttons until the control is cleared.

• Pressing M MODE again also restores original functions. However, pressing SEL makes the unit enters a different mode.

Detaching the control panel

Attaching the control panel

CAUTION:

The lever comes out if you pressed the 0 button while the panel is detached. If this happens, push the lever back into lock position before attaching the panel.

Lever

For safety...

• Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

CONTENTS

INTRODUCTIONS

Playable disc types ............................................................................................. 6

Preparation ....................................................................................................... 7

OPERATIONS

Basic operations ................................................................................................. 8

• Using the control panel ................................................................................. 8

• Using the remote controller (RM-RK241) ........................................................ 9

Listening to the radio .......................................................................................... 11

Disc operations ................................................................................................... 13

Listening to the USB device .................................................................................. 24

Dual Zone operations .......................................................................................... 26

EXTERNAL DEVICES

Listening to the CD changer ................................................................................. 27

Listening to the iPod / D. player ........................................................................... 29

Listening to the other external components .......................................................... 31

SETTINGS

Selecting a preset sound mode ............................................................................. 32

General settings — PSM ...................................................................................... 35

Setup menu ........................................................................................................ 39

Assigning titles ................................................................................................... 42

ENGLISH

REFERENCES

Maintenance ...................................................................................................... 43

More about this unit ........................................................................................... 44

Troubleshooting ................................................................................................. 49

Specifications ..................................................................................................... 52

Playable disc types

Disc type Recording format, file type, etc Playable

DVD DVD-Video (Region Code numbers include “3”) *

ENGLISH

DVD-Audio

DVD-ROM

DVD Recordable/Rewritable

/-RW, +R/+RW *3)

(DVD-R *

• DVD-Video: UDF bridge

• DVD-VR: UDF 201

• DivX/MPEG-1/MPEG-2/MP3/ WMA/WAV: Compliant to ISO 9660 level 1, level 2, Romeo, Joliet

DVD-RAM All

Dual Disc DVD side

CD/VCD Audio CD/CD Text (CD-DA)/DTS-CD *

CD Recordable/Rewritable (CD-R/-RW)

• Compliant to ISO 9660 level 1, level 2, Romeo, Joliet

DVD-Video

DVD-VR (non-CPRM only)

DivX/MPEG-1/MPEG-2 Video

MP3/WMA/WAV

DVD+VR

JPEG/MPEG4

Non-DVD side

VCD (Video CD)

CD-ROM

CD-I (CD-I Ready)

CD-DA

DivX/MPEG-1/MPEG-2 Video

MP3/WMA/WAV

JPEG/MPEG4

*1 If you insert a DVD-Video disc of an incorrect Region Code, “REGION CODE ERROR” appears on the monitor. *2 DVD-R recorded in multi-border format is also playable (except for dual layer discs).

It is possible to play back finalized +R/+RW (Video format only) discs. However, the use of +R double layer disc on

this unit is not recommended.

*4 To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 41 and 47).

Preparation

Cancel the display demonstration and set the clock

• See also pages 35 and 36.

When the power is turned off: Check the current clock time When the power is turned on: Change the display information and pattern

~ Turn on the power. Ÿ Enter the PSM settings. ! ] ⁄ Cancel the display demonstrations

Select “Demo,” then “Off.”

Set the clock

Select “Clock Hr” (hour), then adjust the hour. Select “Clock Min” (minute), then adjust the minute. Select “24H/12H,” then “24Hours” or “12Hours.”

@ Finish the procedure.

ENGLISH

Changing the display information and pattern

Ex.: When tuner is selected as the source

Source operation display

Audio level meter display

(see “LevelMeter” on page 35)

7INTRODUCTIONS

Basic operations

Using the control panel

ENGLISH

1 Select the source.

TUNER = DISC * = USB = CD-CH */iPod */

D.PLAYER * (or EXT IN) = LINE IN = (back to

the beginning)

* You cannot select these sources if they are not

ready or not connected.

2 • TUNER: Select the bands.

• DISC/USB: Start playback.

3 • Turn on the power.

• Turn off the power [Hold].

• Attenuate the sound (if the power is on).

• Volume control [Turn].

4 • Enter the sound mode settings.

• Enter the PSM settings [Hold].

5 Display window

6 Select the sound mode.

7 Eject disc.

8 USB (Universal Serial Bus) input terminal

9 Detach the panel.

p Change the display information and pattern.

q Enter functions mode.

w • TUNER: Select preset station.

• DISC/USB/CD-CH: Select chapter/title/program/ folder/track/disc (for CD changer).

e • TUNER: Search for station.

• DISC/USB/CD-CH: Select chapter/track.

• iPod/D.PLAYER: Select track.

r • TUNER: Select preset station.

• DISC/USB/CD-CH: Select title/program/playlist/ folder.

• iPod/D.PLAYER: Enter the main menu/Pause or stop playback/Confirm selection.

Using the remote controller (RM-RK241)

Installing the lithium coin battery (CR2025)

Before using the remote controller:

• Aim the remote controller directly at the remote sensor on the unit.

• DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Remote sensor

Warning: To prevent accidents and damage

• Do not install any battery other than CR2025 or its

equivalent.

• Do not leave the remote controller in a place

(such as dashboards) exposed to direct sunlight for a long time.

• Store the battery in a place where children cannot

reach.

• Do not recharge, short, disassemble, heat the

battery, or dispose of it in a fire.

• Do not leave the battery with other metallic

materials.

• Do not poke the battery with tweezers or similar

tools.

• Wrap the battery with tape and insulate when

throwing away or saving it.

IMPORTANT:

If Dual Zone is activated (see page 26), the remote controller only functions for operating the DVD/CD player.

EXTRA MONITOR

1 Monitor control buttons

• Used for a JVC monitor—KV-MR9010, KV-MH6510, KV-M706, or KV-M705.

DVD/RECEIVER

2 • Turns the power on if pressed briefly or

attenuates the sound when the power is on.

• Turns the power off if pressed and held.

3 Selects the source. 4 Selects the FM/AM bands. 5 Not applicable for this unit. 6 Activates or deactivates Dual Zone.

ENGLISH

Continued on the next page

9OPERATIONS

7 Adjusts the volume level.

• Also functions as 2nd VOL button when pressed with SHIFT button (see page 26).

8 *

• DVD-Video/DivX: Shows disc menu.

• DVD-VR: Shows the ORIGINAL PROGRAM

ENGLISH

screen.

• VCD: Starts PBC playback.

9 *

Enters disc setup menu.

p SHIFT button q For disc/USB operations:

• 7 : Stops playback.

• 3 : Starts playback.

• 8 : Pauses.

•

3 also functions as ZOOM button when

pressed with SHIFT button (see page 20).

• Not applicable for CD changer/iPod/D. player operations.

w For FM/AM tuner operations:

• 5 / ∞ : Changes the preset stations.

• 4 / ¢ :

– Searches for stations automatically if

pressed briefly.

– Searches for stations manually if pressed

and held.

For advanced disc/USB operations:

• 5 / ∞ :

DVD-Video: Selects the titles. DVD-VR: Selects the programs/playlists. USB/other discs (except VCD/CD): Selects the

folders if included.

• 4 / ¢ :

– Reverse skip/forward skip if pressed briefly. – Reverse search/forward search if pressed

and held.

• 1 / ¡ : Reverse search/forward

search. *

For Apple iPod/JVC D. player operations:

• ∞ : Pauses/stops or resumes playback.

5 : Enters the main menu. (Now 5/∞/4 / ¢ work as the

menu selecting buttons.) *

• 4 / ¢ (in menu selecting mode): – Selects an item if pressed briefly. (Then,

press ∞ to confirm the selection.)

– Skips 10 items at a time if pressed and held.

• 4 / ¢ : – Reverse skip/forward skip if pressed briefly. – Reverse search/forward search if pressed

and held.

e Shows the on-screen bar.

• Also functions as DIRECT button when pressed with SHIFT button. *

r *

• DVD-Video/DivX: Shows disc menu.

• DVD-VR: Shows the PLAY LIST screen.

• VCD: Starts PBC playback.

t *

• Makes selection/settings.

• @ / # : DivX/MPEG Video: Searches for index during play.

• DISC +/–: Changes discs when the source is “CD-CH.”

y *

RETURN button

u • DVD-Video: Selects audio language ( ),

subtitles ( )*1, angle ( )*5.

• DVD-VR: Selects audio language (

) and

subtitles ( )*1.

• DivX: Selects audio language ( ) and

subtitles (

)*1.

• VCD: Selects audio channel ( ).

Functions as number buttons when pressed with

SHIFT button.

– FM/AM: Selects preset stations (1 – 6). – DISC/USB: Selects chapter/title/folder/track after

entering search mode by pressing SHIFT and DIRECT.

Not applicable for CD changer operations.

* *3 5 : Returns to the previous menu. ∞ : Confirms the selection. *4 You can directly select title/chapter/program/playlist/

folder/track using the number buttons (see pages 17 – 19).

*5 Functions as SURROUND button when pressed with

SHIFT button (not applicable for this unit).

Listening to the radio

Select preset station.

Change the display information* and pattern

~ Select “TUNER.” Ÿ Select the bands.

! Search for a station to listen—Auto Search.

Manual Search: Hold either one of the buttons until “Manual Search” appears on the display, then press it

repeatedly.

• When receiving an FM stereo broadcast with sufficient signal strength, lights up on the display.

* If no title is assigned to a station, “No Name” appears. To assign a title to a station, see page 42.

ENGLISH

When an FM stereo broadcast is hard to receive

Reception improves, but stereo effect will be lost.

• lights up on the display.

3 Exit from the setting.

FM station automatic presetting — SSM (Strong-station Sequential Memory)

You can preset up to six stations for each band.

Continued on the next page

11OPERATIONS

Local FM stations with the strongest signals are

ENGLISH

searched and stored automatically in the FM band.

Manual presetting

Ex.: Storing FM station of 92.5 MHz into preset number

4 of the FM1 band.

Using the number buttons

3 Display the Preset Station List.

4 Select the preset number you want to

store into.

• You can move to the lists of the other FM bands by pressing number button 5 ( ) or 6 ( ) repeatedly.

5 Store the station.

Using the Preset Station list

• When appears on the display, you can move back to the previous display by pressing number button 3.

1 Follow steps 1 and 2 of “Using the

number buttons” above.

• By holding 5 / ∞, the Preset Station List will appear (go to step 4).

Listening to the preset station on the Preset Station List

1 Display the Preset Station List, then

select the preset station you want to listen to.

2 Change to the selected station.

Disc operations

Before performing any operations...

Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control the playback by referring to the monitor screen. (See pages 20 – 24.) The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc does not have a disc menu, all tracks will be played repeatedly until you change the source or eject the disc.

• See pages 39 – 41 for more settings.

If “

” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to

do.

• In some cases, without showing “ ,” operations will not be accepted.

Open the control panel and insert the disc.

Start playback if necessary.

Change the display information* and pattern

Playback starts automatically.

ENGLISH

To stop play and eject the disc

• Press SRC to listen to another playback source.

Prohibiting disc ejection

To cancel the prohibition, repeat the same procedure.

* You can change the display indication

language while playing a CD Text, MP3, WMA, or WAV file. See “Language” on page 36 for setting.

13OPERATIONS

Operations using the control panel

ENGLISH

During stop: Locate title

*1 During play/pause: Locate chapter

Press: Select chapter

Hold: Reverse/fast-forward chapter *

Select title

During stop: Locate program

*1 During play/pause: Locate chapter

Press: Select chapter

Hold: Reverse/fast-forward chapter *

Select program number/playlist number

*1 Locate particular track directly (PBC not in

use)

Press: Select track

Hold: Reverse/fast-forward track *

—

*1 Locate particular folder directly

Press: Select track

Hold: Reverse/fast-forward track *

Select folder

*1 Locate particular folder directly

Press: Select track

Hold: Reverse/fast-forward track *

Select folder

Press to select number 1 to 6; hold to select number 7 to 12.

*2 Search speed changes to × 2 ] × 10 on the monitor. *3 Search speed changes 1 ] 2 on the monitor.

*1 Locate particular track directly

Press: Select track

Hold: Reverse/fast-forward track *

—

After pressing

, press the following buttons to...

ENGLISH

—

Repeat Chapter: Repeats the current

chapter

Repeat Title: Repeats the current title

—

Skip 10 chapters *

—

Repeat Chapter: Repeats the current

chapter

Repeat Program: Repeats the current

program (not available for Playlist playback)

—

Skip 10 chapters *

* During play or pause

—

Repeat Track: Repeats the current track Repeat Folder: Repeats the current folder

—

Skip 10 tracks (within the same folder)

Intro Track: Plays the first 15 seconds of all

tracks (PBC not in use)

Repeat Track: Repeats the current track

(PBC not in use)

Random Disc: Randomly play all tracks (PBC

not in use)

Skip 10 tracks (PBC not in use)

Continued on the next page

15OPERATIONS

Intro Track: Plays the first 15 seconds of all

tracks

ENGLISH

Intro Folder: Plays the first 15 seconds of

the first track of all folders

Repeat Track: Repeats the current track

Repeat Folder: Repeats the current folder

Random Folder: Randomly play all tracks

of the current folder, then tracks of the

next folders

Random Disc: Randomly play all tracks

Skip 10 tracks (within the same folder)

• You can also cancel the playback mode by selecting “Off” or press number button 4 (

Intro Track: Plays the first 15 seconds of all

tracks

Repeat Track: Repeats the current track

Random Disc: Randomly play all tracks

Skip 10 tracks

Selecting a folder/track on the list (only for DivX/MPEG/MP3/WMA/WAV file)

• When appears on the display, you can move back to the previous display by pressing number button 3.

4 Select an item.

Select “LIST.”

3 Select the list type.

EX.: When “File” is selected in

step 3

• You can move to the other lists by pressing number button 5 ( ) or 6 ( ) repeatedly.

5 Change to the selected item.

• If File List is selected • If Folder List is

selected

• The list disappears and playback starts.

Operations using the remote controller—RM-RK241

: Stop play : Pause (Frame-by-frame playback if pressed during

pause.)

: Start play

: Reverse/forward chapter search *1

• Slow motion *2 during pause. No sound can be heard. : Press: Select chapter *

Hold: Reverse/fast-forward chapter search *

: Select title *

: Select audio language : Select subtitle language : Select view angle

ENGLISH

To search for chapter/title directly

1 Select chapter/title search.

Using menu driven features...

1 / 2 Select the item you want to

start playing.

2 Enter the desired number.

Continued on the next page

17OPERATIONS

: Stop play : Pause (Frame-by-frame playback if

pressed during pause.)

: Start play

ENGLISH

• Forward slow motion *2 during

: Reverse/forward chapter search *1

pause. No sound can be heard. (Reverse slow motion does not work.)

: Press: Select chapter *

Hold: Reverse/fast-forward chapter

search *

: Select program/playlist : Select audio channel : Select subtitle language

To search for chapter/program/ playlist directly

1 Select chapter/program/playlist

search.

2 Enter the desired number.

Using menu driven features...

1 / 2 Select an item you want to start play.

: Stop play

: Pause (Frame-by-frame playback if

pressed during pause.)

: Start play

: Reverse/forward track search *

To search for track (within the same folder)/folder directly

1 Select track/folder search.

: Press: Select track

Hold: Reverse/fast-forward track

search *

: Select folder

: • Return/advance the scenes

by about 5 minutes (see right

2 Enter the desired number.

column).

• DivX: Select chapter. : DivX: Select subtitle language : DivX: Select audio language

*1 Search speed changes to × 2 ] × 5 ] × 10 ] × 20 ] × 60 on the monitor if pressed repeatedly. *2 Slow motion speed changes to 1/32 ] 1/16 ] 1/8 ] 1/4 ] 1/2 on the monitor if pressed repeatedly. *3 During play or pause *4 Search speed changes to × 2 ] × 10 on the monitor. *5 During Original program playback (PG)/Playlist playback (PL) *6 Search speed changes 1 ] 2 ] 3 on the monitor if pressed repeatedly. *7 Search speed changes 1 ] 2 on the monitor.

: Stop play

: Pause (Frame-by-frame playback if

pressed during pause.)

: Start play

: Reverse/forward track search *1

• Forward slow motion *2 during pause. No sound can be heard. (Reverse slow motion does not work.)

: Press: Select track

Hold: Reverse/fast-forward track

search *

: Select audio channel

(ST: stereo, L: left, R: Right)

To select track directly

• For VCD with PBC, a list of items is shown on the disc menu.

1 +

2 Enter the desired number.

• To return to the previous menus, press .

Canceling the PBC playback...

2 +

3 Enter the desired number.

• To resume PBC, press / .

ENGLISH

: Stop play : Pause

: Start play

: Reverse/forward track search * : Press: Select track

To search for track (within the same folder)/folder directly

1 Select track/folder search.

Hold: Reverse/fast-forward track

search *

: Select folder

: Stop play : Pause : Start play

: Reverse/forward track search * : Press: Select track

Hold: Reverse/fast-forward track

search *

2 Enter the desired number.

To search for track directly

1 Select track search.

2 Enter the desired number.

19OPERATIONS

Enlarging the view—Zoom in (DVD/DVD-VR/DivX/MPEG Video/VCD)

During play or pause...

1 While holding , press repeatedly.

ENGLISH

2 Move the enlarged portion.

• To cancel zoom, select “ZOOM OFF.”

Operations using the on-screen bar (DVD/DVD-VR/DivX/MPEG Video/VCD)

These operations are possible on the monitor using the remote controller.

~ Show the on-screen bar (see page 21).

(twice)

Ÿ Select an item.

! Make a selection.

If a pop-up menu appears...

• To cancel the pop-up menu, press .

• For entering time/numbers, see the following.

⁄ Remove the on-screen bar.

Entering time/numbers

Press to change the number, then press to move to the next entry.

• Each time you press , the number increases/decreases by one value.

• After entering the numbers, press .

• It is not required to enter the zero and tailing zeros (the last two digits in the example below).

Ex.: Time search DVD: _:_ _:_ _ (Ex.: 1:02:00) Press once, then twice to go to the third entry, twice, then press ENTER.

On-screen bar

Ex.: DVD-Video

Information

Operation

1 Disc type 2 • DVD-Video/DVD-VR/DTS-CD: Audio signal

format type and channel

• VCD: PBC

3 Playback mode *

DVD-Video: T. RPT: Title repeat C. RPT: Chapter repeat DVD-VR: C. RPT: Chapter repeat PG. RPT: Program repeat DivX/MPEG Video: T. RPT: Track repeat F. RPT: Folder repeat VCD *2: T. RPT: Track repeat A. RND: All random T. INT: Track intro

4 Playback information

Current title/chapter Current program/chapter

Current playlist/chapter

Current track

Current folder/track

5 Time indication

Elapsed playing time of the disc

(For DVD-Video, elapsed playing time of the current title.)

DVD-Video/DVD-VR: Remaining

title/program time VCD: Remaining disc time Elapsed playing time of the current

chapter/track *

Remaining time of the current

chapter/track *

6 Playback status

Play Forward/reverse search Forward/reverse slow-motion Pause Stop

7 Operation icons

Change time indication (see 5) Time Search (Enter the elapsed playing

time of the current title or of the disc.) Title Search (by its number) Chapter Search (by its number) Track Search (by its number) Repeat play * Intro play * Random play *

Change the audio language or audio

channel Change the subtitle language Change the view angle

*1 For intro play/repeat play/random play, see also

pages 15 and 16.

*2 While PBC is not in use. *3 Not applicable for DVD-VR.

ENGLISH

21OPERATIONS

Operations using the control screen (DivX/MPEG Video/MP3/WMA/WAV/CD)

These operations are possible on the monitor using the remote controller.

~ Show the control screen.

DivX/MPEG Video: Press during play.

ENGLISH

MP3/WMA/WAV/CD: Automatically appear during play.

Ÿ Select “Folder” column or “Track” column (not applicable for CD).

! Select a folder or track.

⁄ Start playback.

DivX/MPEG Video: Press . MP3/WMA/WAV/CD: Playback starts automatically.

Control screen

Ex.: MP3/WMA/WAV disc

1 Current folder number/total folder number 2 Folder list with the current folder selected (not

applicable for CD)

3 Selected playback mode 4 Elapsed playing time of the current track 5 Operation mode icon ( 3, 7, 8, ¡, 1 ) 6 Current track number/total number of tracks in the

current folder (total number of tracks on the disc)

7 Track information (only for MP3/WMA/WAV and

CD Text)

8 Track list with the current track selected

To select a playback mode

1 While the control screen is displayed...

Playback mode selection screen appears on the

folder list section of the control screen.

2 Select a playback mode.

3 Select an item.

REPEAT/INTRO:

RANDOM:

4 Confirm the selection.

*1 Not selectable for DivX/MPEG Video *2 FOLDER INTRO/RANDOM: For MP3/WMA/WAV only

Mode Playback functions

F. RPT (folder repeat): Repeats the current folder

T. RPT (track repeat): Repeats the current track

F. INT (folder intro): Plays the first 15 seconds of the first track of all folders

T. INT (track intro): Plays the first 15 seconds of all tracks

A. RND (all random): Randomly play all tracks

F. RND (folder random): Randomly play all tracks of the current folder, then tracks of the next folders

Operations using the list screen (DVD-VR/DivX/MPEG Video/MP3/WMA/WAV)

These operations are possible on the monitor using the remote controller. Before playing, you can display the folder list/track list to confirm the contents and then start playing a track.

~ Display the folder list while stopped.

Ÿ Select an item from the folder list.

• Track list of the selected folder appears.

• To go back to the folder list, press .

! Select a track to start playing.

ENGLISH

• MP3/WMA/WAV: Control screen appears (see page 22).

List screen (For DivX/MPEG Video/MP3/WMA/WAV)

Ex.: Folder list

1 Current folder number/total folder number 2 Current track number/total number of tracks in the

current folder

3 Current page/total number of the pages included

in the list

4 Current folder/track (highlighted bar)

Continued on the next page

23OPERATIONS

List screen for DVD-VR

You can use ORIGINAL PROGRAM or PLAY LIST screen anytime while playing DVD-VR with its data recorded.

1 Select a list screen.

ENGLISH

2 Select an item from the list.

1 Program/playlist number 2 Recording date 3 Recording source (TV station, the input terminal of the recording equipment, etc.) 4 Start time of recording 5 Title of the program/playlist * 6 Current selection (highlighted bar) 7 Creating date of playlist 8 Number of chapters 9 Playback time

* The title of the original program or playlist may not be displayed depending on the recording equipment.

Listening to the USB device

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player (USB mass storage class device), portable HDD, etc. to the unit.

Attaching a USB memory

USB memory

USB input terminal

This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device.

Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback by referring to the monitor screen. (See also pages 20 – 23.)

• See pages 17 – 23 for operation using the remote controller.

• See pages 39 – 41 for more settings.

” appears on the monitor when pressing a

If “ button, the unit cannot accept the operation you have tried to do.

• In some cases, without showing “ ,” operations will not be accepted.

If a USB device has been attached...

Playback starts from where it has

been stopped previously.

• If a different USB device is

currently attached, playback starts from the beginning.

You can operate the USB device in the same way you operate the files on a disc. (See pages 13 – 23.)

Cautions:

• Avoid using the USB device if it might hinder your safety driving.

• Do not pull out and attach the USB device repeatedly while “Reading” is shown on the display.

• Do not start the car engine if a USB device is connected.

• Stop playback before disconnecting a USB device.

• This unit may not be able to play the files depending on the type of USB device.

• You cannot connect a computer to the USB input terminal of the unit.

• Make sure all important data has been backed up to avoid losing the data.

• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

To stop play and detach the USB device

Straightly pull it out from the unit.

• Press SRC to listen to another playback source.

Change the display information and pattern

ENGLISH

• You can change the display indication language while

playing an MP3, WMA, or WAV file. See “Language” on page 36 for setting.

25OPERATIONS

Dual Zone operations

You can connect an external audio equipment to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit. You cannot select “AM” or “USB” as the source when Dual Zone is activated.

ENGLISH

• When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller.

On the remote controller:

These operations are possible on the monitor using the remote controller.

~ Activate Dual Zone.

• indicator lights up on the display.

The source automatically changes to “DISC.” To select a different source to listen through the speakers, press SRC on the

control panel.

• By using the buttons on the control panel, you can operate the newly selected source without affecting Dual Zone operations.

Ÿ Adjust the volume through the 2nd AUDIO OUT plug.

! Operate the DVD/CD player using the remote controller by

referring to the monitor screen.

To cancel Dual Zone operations, press .

• indicator goes off.

On the control panel:

2 Enter Dual Zone settings.

The source automatically changes to “DISC” when

Dual Zone is activated.

26 OPERATIONS

3 Activate or deactivate Dual Zone.

Listening to the CD changer

Change the display information and pattern

It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the CD changer jack on the rear of the unit. See also page 31.

• You can only play conventional CDs (including CD Text) and MP3 discs.

Preparation

Make sure “Changer” is selected for the external input setting, see page 37.

~ Select “CD-CH.” Ÿ Select a disc to start playing.

Press: For selecting disc number 1 – 6. Hold: For selecting disc number 7 – 12.

Pressing (or holding) the following buttons allows you to...

ENGLISH

Button

Press: Select track Hold: Reverse/fast-forward track

Select folder

* Holding either one of the buttons can display the Disc List (see page 29).

Press: Select track Hold: Reverse/fast-forward track

—

Continued on the next page

27EXTERNAL DEVICES

After pressing , press the following buttons to...

ENGLISH

Intro Track: Plays the first 15 seconds of all

tracks of the current disc

Intro Folder: Plays the first 15 seconds of

the first track of all folders

Intro Disc: Plays the first 15 seconds of the

first track of all the inserted discs

Repeat Track: Repeats the current track Repeat Folder: Repeats the current folder

Repeat Disc: Repeats the current disc

Random Folder: Randomly play all tracks

of the current folder, then tracks of the next folders

Random Disc: Randomly play all tracks Random All: Randomly play all tracks of all

the inserted discs

Skip 10 tracks (within the same folder)

• You can also cancel the playback mode by selecting “Off” or press number button 4 ( ).

Intro Track: Plays the first 15 seconds of all

tracks of the current disc

Intro Disc: Plays the first 15 seconds of the

first track of all the inserted discs

Repeat Track: Repeats the current track Repeat Disc: Repeats the current disc

Random Disc: Randomly play all tracks Random All: Randomly play all tracks of all

the inserted discs

Skip 10 tracks

Selecting a disc on the list

• When appears on the display, you can move back to the previous display by pressing number button 3.

2 Select “LIST.”

Listening to the iPod / D. player

3 Select a disc.

• You can move to the other lists by pressing number button 5 ( repeatedly.

) or 6 ( )

4 Change to the selected disc.

• The list disappears and playback starts.

ENGLISH

Change the display information and pattern

Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of the unit. See also page 31.

• Interface adapter for iPod—KS-PD100 for controlling an iPod.

• D. player interface adapter—KS-PD500 for controlling a D. player.

Preparation

Make sure “Changer” is selected for the external input setting, see page 37.

~ Select “iPod” or “D. PLAYER.” Ÿ Select a song to start playing.

29EXTERNAL DEVICES

Selecting a track from the menu

1 Enter the main menu.

This mode will be canceled if no

operations are done for about

ENGLISH

5 seconds.

2 Select the desired menu.

For iPod: Playlists Ô Artists Ô Albums Ô Songs

Ô Genres Ô Composers Ô (back to the

beginning)

For D. player: Playlist Ô Artist Ô Album Ô Genre Ô

Track Ô (back to the beginning)

After pressing to...

• You can also cancel the playback mode by selecting “Off” or press number button 4 (

, press the following buttons

Repeat One: Functions the same as

“Repeat One” of the iPod or “Repeat Mode = One” of the D. player.

Repeat All: Functions the same as

“Repeat All” of the iPod or “Repeat

= All” of the D. player.

Mode

Random Album*: Functions the same

as “Shuffle Albums” of the iPod.

Random Song: Functions the same

as “Shuffle Songs” of the iPod or “Random Play = On” of the D. player.

3 Confirm the selection.

• To move back to the previous menu, press 5.

• If a track is selected, playback starts automatically.

• Holding 4/¢ can skip 10 items at a time.

Pause/stop playback

• To resume playback, press the button again.

Press: Select tracks Hold: Reverse/fast-forward

track

* iPod: Functions only if you select “All Albums” in

“Albums” of the main “MENU.”

+ 77 hidden pages

JVC KD-DV8306, KD-DV8305 Instructions Manual

Specifications and Main Features

Frequently Asked Questions

User Manual