Jungheinrich ETV-318, ETV-320, ETV-3325 User Manual

Reach mast technology saves
space

Maximum throughput with the
lowest energy consumption

Generously designed operator
workplace

Sensitive handling while
driving and lifting

Assistance systems to adapt
trucks to your specific
application

ETV/ETM 318/320/325

Electric reach truck (1,800/2,000/2,500 kg)

Space-saving design, high performance,
innovative technology and optimum
ergonomic working conditions. These
are the strengths of the Jungheinrich
reach truck. Whether for handling pallets,
operating in drive-through or drive-in
racking. Whether for extremely narrow
areas or low clearances. Whether for
single shift or multishift applications:
the 3 series reach truck is the perfect
solution for every application.

The main advantages:

• Saving of space with narrow aisle
widths from 2790 mm.

• Residual capacities of 1000 kg to 13
metres lift height.

• The very latest drive and control
technology ensures greater produc­tivity whilst at the same time reducing
energy consumption.

The advanced ergonomics and tech­nology increases productivity of the
operators, thanks to:

• Outstanding visibility through the
panoramic overhead guard both when
in motion and when stacking pallets,
thanks to the panoramic overhead
guard.

• Automotive pedal configuration.

• Curve Control –automatic reductions
of speed when cornering.

180° and 360° steering: Allows the oper­ator to select between minimum turning
radius and rapid change in travel direc­tion. The steering wheel spinner knob is
always positioned at the ergonomically
optimum 9 o’clock position when driving
in a straight line.

SOLO-PILOT control lever: For sensitive
stacking, even at high lift heights.

The right configuration for your needs:
An extensive catalogue of options with
a wide variety of assistance systems and
battery versions from 560 to 930 Ah
ensures the truck can be adapted to suit
any application

ETV/ETM 318/320/325







h



h

1

h

6

h

7

h

8

210

l

4

m

2

l

x

2

y

l

7

l

1

l

c

Q

4

h

3

h

2

s

Capacity

2600

2500

2400

2300

2200

2100

2000

1900

1800

1700

1600

1500

1400

1300

1200

1100

1000

400 500 600 700 800 900 1000

Load centre distance “c” in mm

ETM/V 325

ETV 320

ETV 318

b

2

a
2

Designation Lift

Triplex

DZ

1)

Fork tilt for ETV series only

2)

Only ETV 320/325

e

Wa

Ast

a
2

b5b3b

b

b

11

4

1

Standard mast types ETV 318/ETV 320/ETM 325/ETV 325

h

(mm)

Closed mast height

3

h

(mm)

1

Free lift

h

2

(mm)

Extended mast

height

h

4

(mm)

Mast tilt forward /

back

a/ß

(°)

4250 2050 1320 4996 1/5 -

4700 2200 1470 5446 1/5 -

5000 2300 1570 5746 1/5 -

5300 2400 1670 6046 1/5 -

5600 2500 1770 6346 1/3 -

5900 2600 1870 6646 0,5/2 -

6200 2700 1970 6946 0,5/2 2/5

6500 2800 2070 7246 0,5/2 2/5

6800 2900 2170 7546 0,5/2 2/5

7400 3100 2370 8146 0,5/1 2/5

8000 3300 2570 8746 0,5/1 2/5

8420 3440 2710 9166 0,5/1 2/5

8720 3540 2810 9466 0,5/1 2/5

9110 3670 2940 9856 0,5/1 2/5

9620 3840 3110 10366 - 2/5

9950 3950 3220 10696 - 2/5

10220 4100 3370 10966 - 2/5

10520 4200 3470 11266 - 2/5

10700 4260 3530 11446 - 2/5

10880 4320 3590 11626 - 2/5

11120 4400 3670 11866 - 2/5

11510 4530 3800 12256 - 2/5

2)

12020

12530

12830

13000

2)

2)

2)

4700 3970 12766 - 2/5

4870 4140 13276 - 2/5

4970 4240 13576 - 2/5

5026 4296 13746 - 2/5

Tilt forks forward /

back

1)

a/ß

(°)

as at: 11/2013

Technical data in line with VDI 2198

1.1 Manufacturer (short form) Jungheinrich

1.2 Model ETV 318 ETV 320 ETM 325 ETV 325

1.3 Drive Electrics

1.4 Manual, pedestrian, stand-on, seated, order picker operation transverse seat

1.5 Load capacity/rated load Q t 1.8 2 2.5 2.5

1.6 Load centre distance c mm 600

Identification

1.8 Load distance x mm 364

1.8.1 Load distance, mast reached forward x1 mm 205 230 230 230

1.9 Wheelbase y mm 1460 1518 1673 1673

2.1.1 Net weight incl. battery (see row 6.5) kg 3522 3650 3895 3700

2.3 Axle load, w.o. load, front / rear kg 2074 / 1448 1842 / 1228 2274 / 1621 2264 / 1436

2.4 Axle loading forks forward with load at front / rear kg 446 / 4876 560 / 4110 366 / 6029 602 / 5598

Weights

2.5 Axle loading forks retracted with load at front / rear kg 1805 / 3517 1681 / 2989 2057 / 4338 2032 / 4168

3.1 Tyres Vulkollan ®

3.2 Tyre size, at front mm Ø 343 x 114 Ø 343 x 114 Ø 343 x 140 Ø 343 x 140

3.3 Tyre size, at rear mm Ø 285 x 100 Ø 355 x 106 Ø 355 x 135 Ø 355 x 135

chassis

3.5 Wheels, number front/rear (× = driven wheels) 1x / 2

Wheels /

3.7 Track width, rear b

mm 1136 1155 1034 1184

11

4.1 Tilt of mast/fork carriage forward/backward α/β ° 1/5

4.2 Mast height (lowered) h1 mm 2400

4.3 Free lift h

4.4 Lift h

4.5 Extended mast height h

4.7 Height of overhead guard h

4.8 Seat height/stand height h

mm 1670

2

mm 5300

3

mm 6046

4

mm 2190

6

mm 1057

7

4.10 height of support arms h8 mm 285

4.19 Overall length l1 mm 2418 2459 2547 2547

4.20 Length incl. back of forks l

mm 1306

2

4.21 Total width b1/b2 mm 1270 / 1270 1290 / 1270 1198 / 1120 1348 / 1270

4.22 Fork dimensions s/e/l mm 40 / 120 / 1150 50 / 140 / 1150 50 / 140 / 1150 50 / 140 / 1150

4.23 Fork carriage ISO 2328, class/type A, B 2B

4.24 Fork carriage width b

Basic dimensions

4.25 Width over forks b

4.26 Width between support arms/loading surfaces b

4.28 mast reach l

mm 830

3

mm 335 / 730 356 / 750 356 / 580 356 / 750

5

mm 940 940 790 940

4

mm 569

4

4.32 Floor clearance centre wheelbase m2 mm 80 95 95 95

4.32.1 Ground clearance at lowest point mm 30

4.33 Aisle width for pallets 1000 × 1200 sideways Ast mm 2737

4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2790

4.35 Turning radius Wa mm 1663 1710 1865 1865

4.37 length over the support arms l

mm 1842 1920 2075 2075

7

5.1 Travel speed, w. / w.o. load km/h 14 / 14

5.2 Lift speed, w. / w.o. load m/s 0.38 / 0.64

5.3 Lower speed, w. / w.o. load m/s 0.55 / 0.55

5.4 Traverse speed w. / w.o. load m/s 0.2 / 0.2

5.7 Gradeability laden/unladen % 7 / 11

5.8 Max. gradeability, laden/unladen % 9 / 13 10 / 15 10 / 15 10 / 15

5.9 Acceleration time w. / w.o. load S 4.6 / 4.2

Performance data

5.10 Service brake electric

6.1 Drive motor rating S2 60 min. kW 6.9

6.2 Lift motor rating at S3 15% kW 14.0

6.3 Battery according to DIN 43531/35/36 A,B,C, no DIN 43531 - C DIN 43531 - C DIN 43531 - B DIN 43531 - C

6.4 Battery voltage/nominal capacity K5 V/Ah 48 / 620

6.5 Battery weight kg 1005 1005 1210 1005

Electrics

6.6 Energy consumption according to VDI cycle kWh/h 4. 3

6.7 Throughput eciency t/h 72.8

6.8 Energy consumption at max. throughput kWh/h 4.1

8.1 Type of drive control Mosfet / AC

8.2 working pressure for attachments bar 150

8.3 oil flow for attachments l/min 20

Misc.

8.4 Sound pressure level at operator’s ear according to EN 12053 dB (A) 68

1)

7)

1)

1)

1)

1)

5)

6)

6)

5)

5)

6)

3)

4)

4)

4)

1)

412

7)

355

1)

1316

1)

624

1)

2750

1)

2794

14 / 14

0.38 / 0.64

0.2 / 0.2

4.6 / 4.2

5)

6.9

6)

14.0

5)

6)

6)

5)

1)

389

2)

7)

355

1)

1494

1)

703

1)

2921

1)

2969

14 / 14 14 / 14

0.35 / 0.64 0.35 / 0.64

0.2 / 0.2 0.2 / 0.2

5.4 / 4.8 5.4 / 4.8

6.9 6.9

14.0 14.0

48 / 620 48 / 775 48 / 620

4)

4.5

85.4

4.15

4)

4)

4.9 4.9

99.2 99.2

4.3 4.3

487

355

1396

736

2854

2883

1)

7)

1)

1)

1)

1)

1)

different battery sizes change these values

2)

mast-dependent

3)

Maximum battery size 775 Ah

4)

With Drive & Lift Plus options package

5)

With Drive Plus options package

6)

With Lift Plus options package

7)

With load wheel cover: + 30 mm

In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may result in different values.

Benefit from the advantages

Ergonomic cab SOLO-PILOT Wide variety of options packages Clear view through panoramic roof

Ergonomic cockpit

The operator position provides ideal
working conditions for relaxed perform­ance.

• Panoramic overhead guard for an
unobstructed view of the raised load
(optional).

• Fabric seat with adjustment options
for seating position, backrest and body
weight.

• Plenty of storage options.

• Important truck controls are within
easy reach.

• Generous space, even for tall oper­ators.

• Electric steering (choose 180° or 360°).
When driving in a straight line, the
steering wheel spinner knob is always
at the optimum ergonomic position.

• Pedals configured in the same way as
for a car. Automotive pedal configur­ation.

SOLO-PILOT control lever

Control lever for activating all hydraulic
functions and the horn and for selecting
the travel direction.

• All the controls are within the oper­ators field of vision and are clearly
designated for each specific function.

• Travel direction switch features intuitive
direction change.

• Sensitive control of all functions for
operating accuracy within millimetres.

• Extra attachments such as a fork posi­tioner (optional) are also conveniently
controlled by the SOLO-PILOT.

Easy-to-read operator display

High-quality control instrument display­ing the most important operating data.

• Display of direction of travel and wheel
position.

• Battery status with display of time
remaining until the next charging.

• A choice of three travel programs for
individual adaptation to any needs.

• Operating hours and time of day.

• Lift height (optional).

• Load weight (optional).

• Residual capacity (optional).

High-performance mast

Jungheinrich masts guarantee maximum
safety and space utilisation to high lift
heights.

• Triplex masts with lifting heights up to
13,000 mm.

• Excellent visibility to the load.

• Lowest clearances at high lift heights.

• High residual capacities even at high lift
heights.

• Optional mast reach cushioning.

Optional packages for dierent con­ditions of use

• “Eciency” for longest uptime with a
battery.

• “Drive Plus” for applications with
frequent long routes.

• “Lift Plus” for extensive lifting to high lift
heights.

• Holder for radio data terminal, writing
pad or video monitor.

Assistance systems (optional)

• Operation Control, the load weight is
sequentially measured and compared
with the residual capacity of the truck.
If the limit value is approached, a visual
and acoustic warning is issued.

• Position Control with SNAP function
for a simple and fast stacking without
additional pressing of keys.

• Warehouse Control stacking orders are
automatically transferred by the ware­house management system. This pre­vents stacking in incorrect locations.

• Anti-slip Control for more traction on
wet or dusty floors.

Jungheinrich UK Ltd.

Head Oce:
Sherbourne House
Sherbourne Drive
Tilbrook
Milton Keynes MK7 8HX
Telephone [phone]
Fax [phone]

[e-mail]
www.jungheinrich.co.uk

The German production

facilities in Norderstedt and

Moosburg are certified.

Jungheinrich fork lift

trucks meet European

safety requirements.

T_ETV/ETM 318/320/325_012014_en_UK_000