FR 2211 R FR 2211 M FR 2213 MA FR 2216 A FR 2216 A2
Operator ′ s manual
Please read the operator’s manual carefully and
make sure you understand the instructions
before using the machine.
2 –
En
g
lish
CONTENTS
Contents
CONTENTS
Contents ...................................................................... 2
INTRODUCTION
Dear Customer, ............................................................ 3
Driving and transport on public roads .......................... 3
Towing .......................................................................... 3
Use .............................................................................. 3
Good service ................................................................ 4
Serial Number .............................................................. 4
Service journal
Pre-delivery service ..................................................... 5
After the first 5 hours ................................................... 5
KEY TO SYMBOLS
Symbols ....................................................................... 6
SAFETY INSTRUCTIONS
Safety instructions ........................................................ 8
Driving on slopes ......................................................... 9
Children ....................................................................... 10
Maintenance ................................................................ 10
Transport ...................................................................... 11
WHAT IS WHAT?
Location of the controls ................................................ 12
PRESENTATION
Presentation ................................................................. 13
Cutting unit ................................................................... 14
Lifting lever for the cutting unit ..................................... 14
Cutting height adjustment lever ................................... 14
Seat ............................................................................. 14
Fuelling ........................................................................ 15
Release lever ............................................................... 15
Driving
Before starting ............................................................. 16
Start the engine ........................................................... 16
Starting the engine with a weak battery ....................... 17
Driving the Rider .......................................................... 18
Cutting tips .................................................................. 19
Starting on a slope, manual gearbox ........................... 19
Stop the engine ............................................................ 19
Release lever ............................................................... 19
Maintenance
Maintenance schedule ................................................. 20
Cleaning ....................................................................... 21
Removing of the machine hoods ................................. 21
Muffler .......................................................................... 21
Checking and adjusting the steering wires .................. 22
Checking the brake ...................................................... 22
Adjusting the brake ...................................................... 22
Checking and adjusting the brake on FR 2213 MA,
FR2216 A and FR 2216 A2 ......................................... 23
Adjusting the throttle wire ............................................ 23
Checking and adjusting the choke wire ....................... 23
Replacing the air filter .................................................. 24
Replacing the air filter .................................................. 24
Replacement of fuel filter ............................................. 25
Checking the fuel pump’s air filter ................................ 25
Checking the tyre pressure .......................................... 25
Check the level of the battery acid ............................... 25
Ignition system ............................................................. 26
Fuses ........................................................................... 26
Check the safety system .............................................. 27
Checking the engine’s cooling air intake ...................... 28
Checking and adjustment of the cutting unit’s ground
pressure ....................................................................... 28
Checking the cutting unit’s parallelism ......................... 28
Adjusting the parallelism of the cutting unit .................. 28
Service position for the cutting unit .............................. 29
Checking the blades ..................................................... 30
Removing the Mulching plug ........................................ 31
Lubrication
Checking the engine’s oil level. .................................... 32
Replacing the engine oil ............................................... 32
Changing the oil filter ................................................... 32
Checking the oil level in the transmission on
FR2213MA, FR2216A and FR2216A2 ......................... 33
Lubricating the belt adjuster ......................................... 33
Lubricating the front wheel bearings ............................ 33
General lubrication ....................................................... 33
Troubleshooting schedule
Storage
Winter storage .............................................................. 35
Guard ........................................................................... 35
Service ......................................................................... 35
TECHNICAL DATA
EC-declaration of conformity ........................................ 39
En
g
lish
– 3
INTRODUCTION
Dear Customer,
Thank you for choosing a Jonsered Frontrider. Jonsered Frontriders are built to a unique design with a front-mounted cutting unit
and a patented rear-wheel steering system. FrontRiders are designed for maximum efficiency even in small or confined areas. The
closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.
We hope you will find this operator’s manual very useful. By following its instructions (on operation, service, maintenance, etc.) you
will significantly extend the life of the machine and even its second-hand value.
When you sell your Frontrider, make sure you pass on the operator’s manual to the new owner.
The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded.
A well-documented service history reduces the costs of seasonal maintenance and influences the second-hand value of the
machine. Bring the operator’s manual with the Frontrider when bringing it to a workshop for service procedures.
Driving and transport on public roads
Check the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another
vehicle always use approved securing devices and make sure that the machine is securely held.
Towing
When your machine is equipped with a hydrostatic transmission you should, if necessary, only tow the machine over short
distances and at a low speed, otherwise there is a risk of damaging the transmission.
The power transmission must be disengaged when towing, see the instructions under the heading Clutch control.
Use
This machine is designed solely for cutting grass on conventional lawns and other cleared and leveled ground without obstacles,
as rocks, stumps etc., and, in conjunction with accessories supplied by the manufacturer even for other special tasks for which
instructions are delivered with the accessory. Use in any other way is considered as contrary to the intended use. Compliance with
and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential
elements of the intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and
who are acquainted with the relevant safety procedures.
Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road traffic
regulations must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.
4 –
En
g
lish
INTRODUCTION
Good service
Jonsereds products are sold all over the world and only through servicing dealers. This is to ensure that you, the customer, get the
best support and service. For example, before this machine was delivered it was inspected and adjusted by your dealer. See the
certificate in the Service Journal in this manual.
When you need spare parts or advice on service issues, warranty terms, etc., contact:
Serial Number
The serial number can be found on the printed plate attached to the front, left-hand side under the seat. Stated on the plate, from
the top are:
• The machines type designation.
• The manufacturer’s type number.
• The machine’s serial number.
State the type designation and serial number when ordering spare parts.
The engine serial number is given on a bar code decal. This is located on the left side of the crankcase, in front of the starter motor.
The sign states:
• Model
• Type
• Code.
Please quote when ordering parts.
The transmission’s serial number on hydrostatic machines is stated on the barcode decal located on the front of the housing on
the left-hand drive axle:
• Type designation is stated above the barcode and starts with the letter ”K”.
• The serial number is stated above the barcode and has the prefix “s/n”.
• The manufacturer’s type number is stated under the barcode and has the prefix “p/n”.
State the type designation and serial number when ordering spare parts.
This Operator’s Manual belongs to machine with
serial number:
Engine Transmission
En
g
lish
– 5
Service journal
Pre-delivery service
1
1a. Dry-charged battery (5067888-01):
Top up battery with acid and charge for four hours.
1b. Wet-charged battery (5101385-01):
Charge at 3 ampere for 4 hours.
2 Fit steering wheel, seat and any optional equipment.
3 Check and adjust tyre pressure (60 Kpa, 0.6 bar, 9 PSI).
4 Adjust cutting unit:
Adjust lift springs (effective weight of cutting unit should be 12-15kg / 26.5-33 lb).
Adjust cutting unit so that rear edge is about 2-4 mm / 1/8” higher than front edge.
Adjust cutting unit height setting so that cutting height limit is 5 mm / 3/16” above the frame of the unit at the lowest
cutting height.
5 Check that the right amount of oil is in the engine.
6 Check that there is oil in the transmission’s oil tank.
7 Connect battery.
8 Fill with fuel and start engine.
9 Check that machine does not move in neutral.
10 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for the hydrostat pedals/neutral position.
Check engine speed, 2900 ± 100 rpm.
11 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the second-hand value of the machine.
Range of applications for Mulching.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certified:
Date, mileage, stamp, signature
After the first 5 hours
1 Change engine oil
6 –
En
g
lish
KEY TO SYMBOLS
Symbols
These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Hydrostatic freewheel
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
En
g
lish
– 7
KEY TO SYMBOLS
Risk that the machine will tip over
Never drive across a slope
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted
Starting instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Apply and lock the parking brake.
If the engine is cold, use the choke
Release the parking brake before driving
Switch off the engine and take off the ignition
cable before repairs or maintenance
8 –
En
g
lish
SAFETY INSTRUCTIONS
Safety instructions
These instructions are for your safety. Read them carefully.
Insure your Rider
• Check the insurance coverage for your new Rider.
• Contact your insurance company.
• You should have fully comprehensive insurance including:
third party, fire, damage, theft and liability
General use
• Read all the instructions in this operator’s manual and on
the machine before you start it. Ensure you understand
them and then observe them.
• Learn how to use the machine and its controls safely and
learn to how to stop quickly. Also learn to recognize the
safety decals.
• Only allow the machine to be used by adults who are
familiar with its use.
• Make sure nobody else is in the vicinity of the machine
when you start the engine, engage the drive or drive off.
• Clear the area of objects such as stones, toys, wires, etc.
that may become caught in the blades and be thrown out.
• Stop the engine and prevent the engine from being
started until you have cleaned the outlet channel.
• Look out for the ejector and do not direct it towards
anyone.
• Stop the engine and prevent it from starting before you
clean the cutting unit.
• Remember that the driver is responsible for dangers or
accidents.
• Never carry passengers. The machine is only intended to
be used by one person.
• Always look downwards and backwards before and while
reversing. Keep watch for both large and small obstacles.
• Slow before cornering.
• Switch off the blades when you are not mowing.
• Take care when rounding a fixed object, so that the blades
do not hit it. Never run the machine over foreign objects.
• Only use the machine in daylight or in other well-lit
conditions. Keep the machine at a safe distance from
holes or other irregularities in the ground. Pay attention to
other possible risks.
• Never use the machine if you are tired, if you have
consumed alcohol, or if you are taking other drugs or
medication that can affect your vision, judgement or coordination.
• Keep an eye on the traffic when working close to a road or
when crossing it.
• Never leave the machine unsupervised with the engine
running. Always stop the blades, apply the parking brake,
stop the engine and remove the keys before leaving the
machine.
!
WARNING! The ignition system of this
machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with pacemakers. To
reduce the risk of serious or fatal injury, we
recommend persons with pacemakers to
consult their physician and the pacemaker
manufacturer before operating this machine.
!
WARNING! This machine can sever hands
and feet as well as throw objects. Failure to
observe the safety instructions can result in
serious injuries.
!
WARNING! Engine exhaust, some of its
constituents and certain vehicle
components contain or emit chemicals
considered to cause cancer, birth defects or
other reproductive impairment. The engine
emits carbon monoxide, which is a
colourless, poisonous gas. Do not use the
machine in enclosed spaces.
En
g
lish
– 9
SAFETY INSTRUCTIONS
• Never allow children or other persons not trained in the
use of the machine to use or service it. Local laws may
regulate the age of the user.
• Use hearing protection to minimise the risk of hearing
impairment.
• Wear approved protective glasses during assembly and
when operating.
• Never wear loose fitting clothes that can catch in moving
parts.
• Never use the machine when barefoot. Always wear
protective shoes or protective boots, preferably with steel
toes.
• Make sure that you have first aid equipment close at hand
when using the machine.
Driving on slopes
Driving on slopes is one of the operations where the risk of
the driver losing control of the machine or of it overturning is
the greatest; this can result in serious injury or death. All
slopes demand extra care. If you cannot reverse up a slope or
if you feel unsure, do not mow it.
This is what you do
• Remove obstacles such as stones, branches, etc.
• Mow upwards and downwards, not sideways.
• Do not use the machine on ground that slopes more than
10 ° .
• Avoid starting or stopping on a slope. If the tyres start to
slip, stop the blades and drive slowly down the slope.
• Always drive smoothly and slowly on slopes.
• Do not make any sudden changes in speed or direction.
• Avoid unnecessary turns on slopes, if necessary, turn
slowly and gradually downwards if possible. Drive slowly.
Do not turn the wheel sharply. FR 2211: Select a low gear
so that you will not need to stop to change gear. The
machine engine-brakes even better in low gear.
• Watch out for and avoid driving over furrows, holes and
bumps. It is easier for the machine to overturn on uneven
ground. Tall grass can hide obstacles.
• Take extra care if any attachments are fitted that can
change the stability of the machine.
• Do not mow too close to edges, ditches or banks. The
machine can suddenly overturn if one wheel comes over
the edge of a steep slope or a ditch, or if an edge gives
way.
!
WARNING! You must use approved personal
protective equipment whenever you use the
machine. Personal protective equipment
cannot eliminate the risk of injury but it will
reduce the degree of injury if an accident
does happen. Ask your dealer for help in
choosing the right equipment.
IMPORTANT INFORMATION
Do not drive down slopes with the unit raised.
10 –
En
g
lish
SAFETY INSTRUCTIONS
• Do not mow wet grass. It is slippery, and tyres can lose
their grip so that the machine skids.
• Do not try to stabilize the machine by putting your foot on
the ground.
• When cleaning the chassis, the machine may never be
driven near verges or ditches.
• Follow the manufacturer’s recommendations regarding
wheel weights or counterbalance weights to increase
machine stability.
Children
• Serious accidents may occur if you fail to be on your guard
for children in the vicinity of the machine. Children are
often attracted to the machine and mowing. Never
assume that children will remain where you last saw them.
• Keep children away from the area to be mowed and under
close supervision by another adult.
• Keep an eye out and shut off the machine if children enter
the work area.
• Before and during reversing procedures, look behind you
and down for small children.
• Never allow children to ride along. They can fall off and
seriously injure themselves or be in the way for safe
manoeuvring of the machine.
• Never allow children to operate the machine.
• Be particularly careful near corners, bushes, trees or
other objects that block your view.
Maintenance
• Stop the engine. Prevent starting by removing the ignition
cable from the spark plug or remove the ignition key
before making any adjustments or carrying out
maintenance.
• Never fill the fuel tank indoors.
• Petrol and petrol fumes are poisonous and extremely
flammable. Be especially careful when handling petrol, as
carelessness can result in personal injury or fire.
• Only store fuel in containers approved for the purpose.
• Never remove the fuel cap and fill the petrol tank while the
engine is running.
• Allow the engine to cool before refuelling. Do not smoke.
Do not fill petrol in the vicinity of sparks or naked flames.
• Handle oil, oil filters, fuel and the battery carefully, of
environmental considerations. Follow the local recycling
requirements.
• Electrical shocks can cause injuries. Do not touch cables
when the engine is running. Do not test the ignition
system with your fingers.
• If leaks arise in the fuel system, the engine must not be
started until the problem has been resolved.
• Store the machine and fuel in such a way that there is no
risk that leaking fuel or fumes can cause any damage.
• Check the fuel level before each use and leave space for
the fuel to expand, because the heat from the engine and
the sun may otherwise cause the fuel to expand and
overflow.
• Avoid overfilling. If you spill petrol on the machine, wipe up
the spill and wait until it has evaporated before starting the
engine. If you spill on your clothing, change your clothing.
• Allow the machine to cool before performing any actions
in the engine compartment.
IMPORTANT INFORMATION
Wheel weights fitted on the rear wheels are recommended
when driving on slopes for safer steering and improved
manoeuvrability. Consult your dealer concerning the use of
wheel weights if you are unsure. Wheel weights can not be
used on AWD-machines. Use counterweights.
!
WARNING! The engine and the exhaust
system become very hot during operation.
Risk of burn injuries if touched.
!
WARNING! The battery contains lead and
lead pollutants, chemicals that are
considered to cause cancer, birth defects or
other reproductive impairment. Wash your
hands after touching the battery.
En
g
lish
– 11
SAFETY INSTRUCTIONS
• Be especially careful when handling battery acid. Acid on
the skin can cause serious corrosive injuries. In the event
of spillage on the skin wash immediately with water.
• Acid in the eyes can cause blindness, contact a doctor
immediately.
• Take care with battery maintenance. Explosive gases
form in the battery. Never perform maintenance on the
battery while smoking or in the vicinity of open flames or
sparks. This can cause the battery to explode and cause
serious injuries.
• Make sure all nuts and bolts are tightened correctly and
that the equipment is in good condition.
• Do not modify safety equipment. Check regularly to be
sure it works properly. The machine must not be driven if
protective plates, protective covers, safety switches or
other protective devices are not fitted or are defective.
• Observe the risk of injury caused by moving or hot parts if
the engine is started with the engine cover open or
protective cowlings removed.
• Do not change the setting of governors and avoid running
the engine at excessively high revs. If you run too fast, you
risk damaging the machine components.
• Never use the machine indoors or in spaces lacking
proper ventilation. Exhaust fumes contain carbon
monoxide, an odourless, poisonous and highly dangerous
gas.
• Stop and inspect the equipment if you run over or into
anything. If necessary, make repairs before starting.
• Never make adjustments with the engine running.
• The machine is tested and approved only with the
equipment originally provided or recommended by the
manufacturer.
• The blades are sharp and can cause cuts. Wrap the
blades or wear protective gloves when handling them.
• Check regularly that the parking brake works. Adjust and
maintain as required.
• The mulching unit should only be used where better
quality mowing is required and in known areas.
• Reduce the risk of fire by removing grass, leaves and
other debris that may have fastened on the machine.
Allow the machine to cool before putting it in storage.
Transport
• The machine is heavy and can cause serious crush
injuries. Take extra care when loading it onto or off a
vehicle or trailer.
• Use an approved trailer to transport the machine. Activate
the parking brake, and secure the machine using
approved fasteners, such as tension belts, chains or ropes
when transporting.
• Check and observe local road traffic regulations before
transporting or driving the machine on roads.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock the machine
during transport. Ensure you secure the machine firmly to
the transporting vehicle.
12 –
En
g
lish
WHAT IS WHAT?
Location of the controls
1
2345678
9
10
11
12
13
14
15
1 Choke control, FR2216 A2
2 Throttle control/choke control
3 Ignition lock
4 Gear shift lever, FR2211 R and FR2211 M
5 Cutting height adjustment lever
6 Lifting lever for the cutting unit
7 Accelerator for reversing, FR2213MA, FR 2216A and
FR2216A2.
8 Speed limiter for driving forward, FR2213MA, FR2216A,
FR2216A2
Parking brake, FR2211 R and FR2211 M
9 Parking brake, FR2213 MA, FR2216A and FR2216 A2
Clutch pedal, FR2211 R and FR2211 M
10 Lock button for the parking brake, left side on FR 2213M,
FR 2216A, right-hand side on FR 2211.
11 Seat adjustment, FR2216A2.
12 Seat adjustment.
13 Fuel cap
14 Cover lock
15 Lever to disengage the drive, FR2213 MA, FR2216A and
FR2216 A2.
Loading...