John Deere AC-6975TB-A, AC-6975TB-D User Manual

AC-6975TB-A
AC-6975TB-D
TOOLBOX

Toolbox Installation Instructions 1

Introduction

Congratulations on the purchase of your new toolbox! You can be assured your toolbox
was constructed and designed with quality and performance in mind. Each component has
been rigorously tested to ensure the highest level of acceptance.

This installation manual was compiled for your benefit. Please read and follow the simple
installation instructions described in this manual. The contents of this manual are based
on the latest product information available at the time of publication. The manufacturer
reserves the right to make changes in price, color, materials, equipment, specifications or
models at any time without notice.

Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim
with the transportation company immediately. Be sure that all damaged parts are replaced
and that the mechanical problems are corrected prior to installation. If you require service,
contact your Customer Service.

Mi-T-M® Corporation, 8650 Enterprise Drive, Peosta, IA 52068

1-877-JD-KLEEN / (1-877-535-5336) Fax [phone]

Monday - Friday 8:00 a.m. - 5:00 p.m. CST

1. Model Number

2. Date and Place of Purchase

Please have the following information available for all service calls:

2 Toolbox Installation Instructions

Table of Content

SAFETY .................................................................................................................4-5

GENERAL SAFETY RULES....................................................................4-5

FUNCTIONAL DESCRIPTION ...............................................................................

MODEL ....................................................................................................6

NAME OF PARTS ..................................................................................6

INSTALLATION .......................................................................................................

MAINTENANCE......................................................................................................10

CLEANING INSTRUCTIONS ..................................................................10

LUBRICATION INSTRUCTIONS............................................................10

NOTES ....................................................................................................................11

6

7-9

Toolbox Installation Instructions 3

Safety

RECOGNIZE SAFETY INFORMATION

This is the safety alert symbol. When you see this symbol in
this manual, be alert to the potential for personal injury.

Follow recommended precautions and safe operating prac­tices.

UNDERSTAND SIGNAL WORDS

A "DANGER, WARNING or CAUTION" safety warning will be
surrounded by a "SAFETY ALERT BOX." This box is used to
designate and emphasize Safety Warnings that must be fol
lowed when installing this toolbox.

Accompanying the Safety Warnings are "signal words" which
designate the degree or level of hazard seriousness. The
"signal words" used in this manual are as follows:

-

DANGER

which, if not avoided, WILL result in

WARNING

which, if not avoided, COULD result in

CAUTION: Indicates a potentially hazardous situation
which, if not avoided MAY result in

: Indicates an imminently hazardous situation

death or

serious injury.

: Indicates a potentially hazardous situation

death or

serious injury.

minor or

moderate injury.

GENERAL SAFETY RULES

WARNING: Read and understand all

instructions.
Failure to follow all
instructions listed below, may
result in serious personal injury.

SAVE THESE INSTRUCTIONS

4 Toolbox Installation Instructions

CAUTION

THIS INSTALLATION REQUIRES THE USE OF
POWER TOOLS. SAFETY GLASSES SHOULD BE
WORN AT ALL TIMES DURING THE USE OF THE
POWER TOOLS.

IF YOU ARE UNABLE TO LIFT A MINIMUM OF 75
LBS., THEN THIS INSTALLATION WILL REQUIRE
THE USE OF TWO PEOPLE.

PINCH AREA BETWEEN BODY AND LID OF
TOOLBOX.

Toolbox Installation Instructions 5

Functional Description

MODEL:

AC-6975TB-A
AC-6975TB-D

NOTE: Some illustrations in this installation manual may show details that differ
from those on your own toolbox.

NAME OF PARTS:

Single-Lid Toolbox:

3/8" J-Bolt (2) 3/8" Flatwasher (2) 3/8" Lockwasher (2)

3/8" Hex Nut (2) Vinyl Cap (2) Plastic Plug (2)

Foam Tape (2) Toolbox Tray (1)

TOOLS REQUIRED:

9/16" Wrench / Socket Drill with a 3/8" Drillbit Scissors Safety Glasses

6 Toolbox Installation Instructions

Installation

H

INSTALLATION INSTRUCTIONS:

CAUTION: THIS INSTALLATION REQUIRES
THE USE OF POWER TOOLS. SAFETY
GLASSES SHOULD BE WORN AT ALL
TIMES DURING THE USE OF THE POWER
TOOLS.

CAUTION: IF YOU ARE UNABLE TO LIFT A
MINIMUM OF 75 LBS., THEN THIS
INSTALLATION WILL REQUIRE THE
USE OF TWO PEOPLE.

CAUTION: PINCH AREA BETWEEN BODY AND
LID OF TOOLBOX. (FIG. 1)

1. Peel backing off the foam gasket (H). (Fig. 2)

2. Attach the foam gasket (H) onto the bottom of the
toolbox (A). Trim the foam gasket (H) flush with
the ends of the toolbox (A). (Fig. 3)

3. Carefully place the toolbox (A) into the back of the
pickup bed. (Fig. 4)

(Fig.1)

(Fig. 2)

(Fig. 4)

(Fig. 3)

Toolbox Installation Instructions 7

Installation

INSTALLATION INSTRUCTIONS (CONTINUED):

CAUTION: SAFETY GLASSES SHOULD BE WORN
DURING THIS STEP OF THE INSTALLATION.

4. Using Figures 5 and 6, mark the mounting hole locations
for the J-hooks. The mounting hole locations should be
centered inside the toolbox (A) and near the lip of the truck
bed rail as shown below.

(Fig.5)

(Fig. 6)

8 Toolbox Installation Instructions

Installation

A

Vehicle Bed

B

B

C

D

E

F

C

D

E

F

B

C

D

E

F

INSTALLATION INSTRUCTIONS (CONTINUED):

5. Secure the toolbox (A) to the vehicle truck bed using the 3/8"
J-bolts (B), 3/8" flatwasher (C), 3/8" lockwashers (D) , and the
3/8" hex nuts (E). Tighten into place using a 9/16" wrench /
socket. (Fig. 7)

6. Now place the vinyl cap (F) onto the exposed threads of the
3/8" J-bolts (B). (Fig. 8)

NOTE: After drilling, it is recommended that a sealant or rust
inhibitor be placed around all holes drilled into the body
panel of the vehicle.

(Fig.7)

(Fig. 8)

Toolbox Installation Instructions 9

Maintenance

MAINTENANCE INSTRUCTIONS:

CLEANING INSTRUCTIONS:
To maintain the luster of your toolbox, use a mild detergent.

NOTE: Locks are provided as a deterrent to inadvertent opening or easy access to
the contents of your toolbox. Contents stored in the toolbox are the
responsibility of the user.

LUBRICATION INSTRUCTIONS:
All locks, latches, latching rods, and hinges should be lubricated regularly to assure
smooth and proper operation for the life of the toolbox. Lubricate the following loca­tions.

Toolbox Latch Assembly

Toolbox Catch Assembly

10 Toolbox Installation Instructions

Notes

Toolbox Installation Instructions 11

Form #37-0804-112003

12 Toolbox Installation Instructions
©Copyright 2003, John Deere

Manufactured for Deere & Company

Moline, Illinois 61265

John Deere Toolbox