John Deere 9610 Parts Catalog

H48255 -UN-16MAY97

1A2

9610 MAXIMIZER™ COMBINE

JOHN DEERE 9610 MAXIMIZER™ COMBINE WITH 900 SERIES CUTTING PLATFORM

MANUFACTURED (1998- )

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00) 10-1

PN=1

1A3

9610 MAXIMIZER™ COMBINE

NOTE

FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS CATALOG - PC-2104.

FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS CATALOG - PC-1223.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-2210.

FOR 918 AND 920 DRAPER PARTS INFORMATION, REFER TO JOHN DEERE 918 AND 920 DRAPER PLATFORMS PARTS CATALOG - PC-2212.

FOR 90 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 90 SERIES CORN HEAD PARTS CATALOG - PC-2404.

IMPORTANT

THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE 9610 MAXIMIZER™ COMBINE. VINTAGE IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT INDENTIFICATION NUMBER (PIN). IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

10-2 9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00)

PN=2

1A4

9610 MAXIMIZER™ COMBINE

PRODUCT INFORMATION NUMBER (PIN) PLATE

THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT-HAND SIDE OF THE TOOL BOX. AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS:

HO9610X675000

COMBINE

(FIRST LINE) HO - MANUFACTURING UNIT (HARVESTER WORKS) 9610 - MODEL IDENTIFIER X - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 675000 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN

(SECOND LINE)

COMBINE - TYPE OF PRODUCT

9610 MAXIMIZER™ COMBINE PC2702 (01-MAY-00) 10-3

PN=3

1A5

9610 MAXIMIZER™ COMBINE

PARTS LISTING INFORMATION

SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES PART MAY BE USED; FOR EXAMPLE:

- THE PART CAN BE USED ON ALL MACHINES.

-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING SERIAL NUMBERS LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE, BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED.

SHORT BLOCK SERIAL NUMBER PLATE

( -RGSB076882500)

RGP3513 -UN-01JAN94

THE REPLACEMENT SHORT BLOCK ASSEMBLY HAS A SERIAL NUMBER PLATE ATTACHED. THE ORIGINAL ENGINE SERIAL NUMBER MUST BE STAMPED ONTO THE NEW PLATE IN THE BLANK SPACE PROVIDED, AS A REFERENCE FOR YOUR DEALER. THE PLATE CAN BE ATTACHED WITH (2) 37H44 DRIVE SCREWS.

1. DESIGNATES ENGINE MANUFACTURER RG - WATERLOO ENGINE WORKS

2. DESIGNATES REPLACEMENT SHORT BLOCK SB

3. DESIGNATES LITERS XXX- 076 (7.6)

4. DESIGNATES THE PRODUCTION DATE 8825

5. DESIGNATES COMPONENT SEQUENCE 00

10-4 9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00)

PN=4

RGP4574 -UN-02OCT95

1A6

9610 MAXIMIZER™ COMBINE

SHORT BLOCK SERIAL NUMBER IDENTIFICATION

SERIAL NUMBER STAMPED INTO CASTING OF BLOCK NEAR PREVIOUS SERIAL NUMBER PLATE. EXAMPLE: RE650490995

1. DESIGNATES SERVICE PART NUMBER RE65049

2. DESIGNATES MONTH ASSEMBLED 09

3. DESIGNATES YEAR ASSEMBLED 95

9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00) 10-5

PN=5

RGP4942 -UN-25JUL97

1A7

9610 MAXIMIZER™ COMBINE

TWO LINE BAR CODED ENGINE SERIAL NUMBER PLATE

FIRST LINE DEFINES

RG - WATERLOO ENGINE WORKS DESIGNATES ENGINE MANUFACTURER. 6 DESIGNATES NUMBER OF CYLINDERS. 081 (8.1 LITERS) DESIGNATES LITER DISPLACEMENT. H - AIR-TO-AIR DESIGNATES TYPE OF AIR INTAKE SYSTEM. H DESIGNATES HARVESTER VEHICLE. XXXXXX DESIGNATES ENGINE SERIAL NUMBER.

SECOND LINE APPLICATION

6081HH003 9610

10-6 9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00)

PN=6

1A8

9610 MAXIMIZER™ COMBINE

DIRECTION ARROW

ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS

A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS

KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS

THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION

BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS ARE PROPERTY CLASS 8.8 OR LOWER.

8.8 OR LOWER.

SI UNITS OF MEASURE

METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00) 10-7

PN=7

1A9

9610 MAXIMIZER™ COMBINE

TRADEMARKS

THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ POSI-TORQ™

DIAL-A-MATIC™ TORQ-GARD SUPREME® HARVESTRAK™ QUIK-TATCH™ CONTOUR MASTER™

CHANGE INDICATOR LINE

CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

FUNCTION CODE (EXAMPLE - FC: 5000)

FUNCTION CODES ARE LOCATED ON EACH PAGE IN THE UPPER RIGHT-HAND CORNER IN THE BOX. THE CODE LISTED IS A GROUPING CODE THAT CAN BE USED FOR WARRANTIES AND FOR DTAC TO IDENTIFY CERTAIN AREAS.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

FOR INDIVIDUAL HEADERS PARTS CATALOGS REFER TO:

PC-2104 - PARTS CATALOG FOR JOHN DEERE 900 SERIES PLATFORMS PC-2210 - PARTS CATALOG FOR JOHN DEERE THREE ROLLER BELT PICK-UP PC-2212 - PARTS CATALOG FOR JOHN DEERE 918 AND 920 DRAPER PLATFORMS PC-1747 - PARTS CATALOG FOR JOHN DEERE 50A SERIES ROW-CROP HEADS PC-1223 - PARTS CATALOG FOR JOHN DEERE 40 SERIES CORN HEADS PC-2404 - PARTS CATALOG FOR JOHN DEERE 90 SERIES CORN HEADS

10-8 9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00)

PN=8

1A10

SECTION INDEX

SECTION 10 - GENERAL INFORMATION SECTION 20 - ENGINE FAN, INTERCOOLER AND SCREENS SECTION 24 - ENGINE SECTION 30 - FUEL AND AIR SECTION 40 - ELECTRICAL SECTION 50 - POWER TRAIN SECTION 60 - STEERING AND BRAKES SECTION 70 - HYDRAULICS SECTION 80 - SEPARATOR SHELL

9610 MAXIMIZER™ COMBINE

SECTION 90 - OPERATOR’S STATION SECTION 110 - FEEDER HOUSE SECTION 120 - THRESHING AND SEPARATION SECTION 121 - DRIVES SECTION 125 - RESIDUE DISPOSAL SECTION 130 - CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER SECTION 160 - DIAL-A-MATIC HEADER HEIGHT CONTROL SECTION 170 - DECALS, BELTS AND CHAINS SECTION 180 - NUMERICAL INDEX

9610 MAXIMIZER™ COMBINE PC2702 (29-FEB-00) 10-9

PN=9

1A11

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX

GRID PAGE GRID PAGE

A 4J5 ARM, CHARGE PUMP MOUNTING ................................ 121

4B18 ARM, DRIVE TIGHTENER, FIXED SPEED .................... 110 -12

3K6 A/C COMPRESSOR HARDWARE R134A ...................... 90 - 81 4J1 ARM, FAN DRIVE SPEED CONTROL ............................ 121 -56

3K4 A/C COMPRESSOR HOSE .............................................. 90 - 79 4C10 ARM, FEEDER HOUSE FLOOR...................................... 110 -30

3K3 A/C COMPRESSOR MANIFOLD...................................... 90 - 78 4H21 ARM, LOCKOUT, DUAL-RANGE .................................... 121 -28

3K3 A/C COMPRESSOR R134A ............................................ 90 - 78 3F17 ARM, REAR LADDER LATCH ........................................ 80 - 16

3E11 A/C CONDENSER ............................................................ 70 - 84 4I7 ARM, SECONDARY COUNTERSHAFT DRIVE .............. 121 -38

1H18 A/C HIGH PRESSURE SWITCH...................................... 40 - 56 4J7 ARM, STRAW CHOPPER DRIVE (FRONT).................... 121 -62

1E19 ACCESS COVER FUEL INJECTION PUMP .................. 24 - 60 5F21 ARM, UNLOADING AUGER COUNTERSHAFT DRIVE.. 130 -58

3B9 ACCUMULATOR PRESSURE GAUGE WIRING 4H11 ARMATURE, HEADER ELECTROMAGNETIC CLUTCH 121 -18

HARNESS .................................................................... 70 - 2 3J13 ARMREST (L.H.) .............................................................. 90 - 62

3C20 ACCUMULATOR, DUAL, ONE HALF GALLON .............. 70 - 40 3J11 ARMREST ADJUSTING MECHANISM, R.H. .................. 90 - 60

3C22 ACCUMULATOR, ONE GALLON .................................... 70 - 42 1G3 ARMREST PANEL, OPERATOR’S .................................. 40 - 14

3C18 ACCUMULATOR, ONE HALF GALLON .......................... 70 - 38 1G3 ARMREST ROCKER SWITCHES .................................... 40 - 14

1D6 ADAPTER, OIL COOLER ................................................ 24 - 23 1G1 ARMREST WIRING HARNESS........................................ 40 - 12

1D10 ADAPTER, OIL COOLER BYPASS ................................ 24 - 27 3J9 ARMREST WITH GLOVE BOX (R.H.)............................ 90 - 58

1H3 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 - 40 4F19 ARMS, FRAME, PRECLEANER CHAFFER .................... 120 -56

1H5 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 - 42 1D3 ARMS, ROCKER .............................................................. 24 - 20

1D4 ADHESIVE,ROCKER ARM COVER GASKET ................ 24 - 21 2D23 ARMS, STEERING, CAM LOBE MOTOR

2G18 ADJUSTABLE REAR AXLE.............................................. 60 - 37 (STEERABLE MOTOR) ................................................ 50 - 68

3I15 ADJUSTER, OPERATOR’S SEAT .................................. 90 - 38 5B12 ARMS, TAILBOARD - CHOP-TO-BALE .......................... 125 -5A

3I20 ADJUSTER, OPERATOR’S SEAT LEVER ...................... 90 - 44 1G3 ASHTRAY .......................................................................... 40 - 14

4I5 ADJUSTING BRACKET, CYLINDER DRIVE, 1E15 ASSEMBLY, CLUTCH (STARTER) .................................. 24 - 56

DUAL-RANGE .............................................................. 121 -36 2F23 ATTENUATOR, STEERING HOSES ................................ 60 - 16

3J11 ADJUSTING MECHANISM, ARMREST, R.H. .................. 90 - 60 5G12 AUGER BELTS ................................................................ 170 -2

1I8 ADJUSTING MOTOR, CONCAVE.................................... 40 - 72 5C25 AUGER CHAIN TIGHTENER, LOWER TAILINGS .......... 125 -40

1I4 ADJUSTING MOTOR, SEPARATOR FAN DRIVE .......... 40 - 67 5F20 AUGER COVERS AND CHANNEL, CROSS .................. 130 -56

1F7 AIR CLEANER AND INTAKE TUBES .............................. 30 - 10 5D6 AUGER DRIVE SHIELD, UPPER TAILINGS .................. 125 -48

1H18 AIR CLEANER PLUGGED SWITCH ................................ 40 - 56 3F21 AUGER DRIVE SHIELDS (R.H.) ...................................... 80 - 20

1G11 AIR CONDITIONER AND HEATER SWITCH.................. 40 - 22 5D6 AUGER DRIVE, UPPER TAILINGS ................................ 125 -48

1E18 AIR CONDITIONER COMPRESSOR FAN PULLEY ...... 24 - 59 5E3 AUGER HOUSING, LOADING, UPPER CLEAN

1E18 AIR CONDITIONER COMPRESSOR IDLER PULLEY.... 24 - 59 GRAIN .......................................................................... 130 -12

1E18 AIR CONDITIONER COMPRESSOR SUPPORT ............ 24 - 59 5E5 AUGER HOUSING, LOADING, UPPER CLEAN

1G9 AIR CONDITIONER WIRING HARNESS ........................ 40 - 20 GRAIN .......................................................................... 130 -14

3I6 AIR CONDITIONING AND HEATER DUCTS .................. 90 - 29 1H13 AUGER SENSOR AND WIRING HARNESS,

3J24 AIR CONDITIONING SYSTEM ........................................ 90 - 74 UNLOADING ................................................................ 40 - 50

3J22 AIR CONDITIONING/HEATER AND 3D13 AUGER SWING SOLENOID CONTROL VALVE ............ 70 - 60

PRESSURIZING FAN .................................................. 90 - 72 5F5 AUGER SWIVEL SUPPORT AND BRACES .................. 130 -40

3J20 AIR CONDITIONING/HEATER HOUSING AND 5E3 AUGER TRANSITION HOUSING .................................... 130 -12

FILTERS........................................................................ 90 - 70 5C19 AUGER TROUGH, LOWER TAILINGS ............................ 125 -34

1F7 AIR DUCT, AIR CLEANER .............................................. 30 - 10 1H13 AUGER WIRING HARNESS, UNLOADING .................... 40 - 50

4F7 AIR DUCT, CLEANING FAN ............................................ 120 -44 5F1 AUGER, GRAIN TANK, VERTICAL UNLOADING .......... 130 -36

4F9 AIR DUCT, CLEANING FAN ............................................ 120 -46 5F14 AUGER, HORIZONTAL UNLOADING

1B21 AIR DUCT, RADIATOR .................................................... 20 - 16 (17- AND 20-FT.) .......................................................... 130 -50

1B9 AIR DUCT, ROTARY SCREEN DOOR............................ 20 - 4 5E7 AUGER, LOADING, CLEAN GRAIN ................................ 130 -16

3I5 AIR FILTER, CAB ............................................................ 90 - 28 5E9 AUGER, LOADING, CLEAN GRAIN FOLD .................... 130 -18

1H18 AIR INLET TEMP SWITCH (253 HP) .............................. 40 - 56 5C17 AUGER, LOWER TAILINGS ............................................ 125 -32

3I24 AIR SEAT SUSPENSION ................................................ 90 - 48 5G13 AUGER, LOWER TAILINGS, BELTS .............................. 170 -3

3J1 AIR SEAT SUSPENSION KITS........................................ 90 - 50 5D6 AUGER, UPPER TAILINGS.............................................. 125 -48

3J3 AIR SEAT SUSPENSION KITS........................................ 90 - 52 5F18 AUGERS, GRAIN TANK CROSS .................................... 130 -54

3J5 AIR SEAT SUSPENSION KITS........................................ 90 - 54 4F1 AUGERS, SHOE GRAIN SUPPLY AND HOUSING........ 120 -38

3J7 AIR SEAT SUSPENSION KITS........................................ 90 - 56 4F3 AUGERS, SHOE GRAIN SUPPLY AND HOUSING........ 120 -40

1G9 AIR SEAT WIRING HARNESS ........................................ 40 - 20 1F18 AUX FIELD LIGHTS SWITCH, OPTIONAL .................... 40 - 4

3J1 AIR SUSPENSION KITS, SEAT ...................................... 90 - 50 1F24 AUXILIARY FIELD LIGHTING .......................................... 40 - 10

3J3 AIR SUSPENSION KITS, SEAT ...................................... 90 - 52 2E2 AXLE SHAFT FINAL DRIVE ............................................ 50 - 72

3J5 AIR SUSPENSION KITS, SEAT ...................................... 90 - 54 2B19 AXLE SPACERS (RING AND PINION FINAL

3J7 AIR SUSPENSION KITS, SEAT ...................................... 90 - 56 DRIVE).......................................................................... 50 - 11

3I24 AIR SUSPENSION, SEAT ................................................ 90 - 48 2B20 AXLE SPACERS, PLANETARY FINAL DRIVE .............. 50 - 12

1E19 ALTERNATOR ADJUSTING STRAP................................ 24 - 60 2C9 AXLE, FINAL DRIVE

1E19 ALTERNATOR BRACKET ................................................ 24 - 60 (RING AND PINION).................................................... 50 - 26

1I6 ALTERNATOR MOUNTING.............................................. 40 - 69 2B18 AXLE, FRONT

1E19 ALTERNATOR SUPPORT ................................................ 24 - 60 (PLANETARY FINAL DRIVE) ...................................... 50 - 10

1I5 ALTERNATOR, SHEAVE AND BELT - BOSCH.............. 40 - 68 2B17 AXLE, FRONT

1I7 ALTERNATOR, VOLTAGE REGULATOR (95 AMP) (RING AND PINION FINAL DRIVE) ............................ 50 - 9

BOSCH.......................................................................... 40 - 70 2G18 AXLE, REAR, ADJUSTABLE............................................ 60 - 37

4C24 ANGLE , RETURN FLOOR, FEEDERHOUSE ................ 110 -44 2G19 AXLE, REAR, SPINDLES ................................................ 60 - 38

1G18 ANTENNA, SPEAKERS AND RADIO .............................. 40 - 30 2G16 AXLE, REAR, SUPPORT.................................................. 60 - 34

10-10 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-60

PN=10

1A12

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

B 5G12 BELTS, ENGINE DRIVE .................................................. 170

1B13 BELTS, ENGINE FAN DRIVES ........................................ 20 - 8

1J11 BACKSHAFT SPEED SENSOR, FEEDER HOUSE ........ 40 - 100 1B15 BELTS, ENGINE FAN DRIVES (HI POWER).................. 20 - 10

3H6 BARRIERS, SOUND ........................................................ 90 - 4 5G14 BELTS, FAN, CLEANING ................................................ 170 -4

1E9 BASE, FUEL FILTER ........................................................ 24 - 50 5G12 BELTS, FEEDER CONVEYOR ........................................ 170 -2

5E18 BASE, GRAIN TANK ........................................................ 130 -28 5G14 BELTS, FEEDER HOUSE ................................................ 170 -4

1D11 BASE, OIL FILTER .......................................................... 24 - 28 5G14 BELTS, HEADER AND REEL .......................................... 170 -4

1I9 BATTERIES, CABLE AND HOLDDOWN ........................ 40 - 73 5G15 BELTS, LOWER TAILINGS AUGER ................................ 170 -5

4G11 BEARING KIT, STRAW WALKERS ................................ 120 -72 5G13 BELTS, LOWER TAINLINGS AUGER ............................ 170 -3

1E21 BEARING KIT, UNDERSIZED MAIN BEARING 4H13 BELTS, PRIMARY COUNTERSHAFT .............................. 121 -20

CRANKSHAFT .............................................................. 24 - 62 5G13 BELTS, ROTARY SCREEN.............................................. 170 -3

2D18 BEARING, COVER AND QUILL (STEERABLE 5G14 BELTS, STRAW CHOPPER ............................................ 170 -4

MOTOR) ........................................................................ 50 - 63 5G14 BELTS, STRAW SPREADER .......................................... 170 -4

5F9 BEARING, GEARCASE, HORIZONTAL UNLOADING 5G14 BELTS, UNLOADING AUGERS ...................................... 170 -4

AUGER.......................................................................... 130 -44 5G15 BELTS, UNLOADING SYSTEM........................................ 170 -5

4B11 BEARING, REVERSER GEARBOX ................................ 110 -4 5G15 BELTS, UPPER TAILINGS AUGER ................................ 170 -5

1C21 BEARING, THRUST .......................................................... 24 - 13 5G12 BELTS, WALKER .............................................................. 170 -2

2E2 BEARINGS, FINAL DRIVE .............................................. 50 - 72 4J23 BLADE, FINE CUT ROTOR (PADDLED WIDE) .............. 121 -78

2C8 BEARINGS, FINAL DRIVE 4J21 BLADE, FINE CUT ROTOR, STRAW CHOPPER .......... 121 -76

(RING AND PINION).................................................... 50 - 25 5B18 BLADE, STRAW SPREADER .......................................... 125 -8

2C9 BEARINGS, FINAL DRIVE 4J19 BLADE, TRI ROTOR STRAW CHOPPER ...................... 121 -74

(RING AND PINION).................................................... 50 - 26 1C2 BLOCK, ENGINE COOLANT HEATER ............................ 20 - 22

2C10 BEARINGS, FINAL DRIVE 1C14 BLOCK, SHORT ................................................................ 24 - 6

(RING AND PINION).................................................... 50 - 28 2C24 BLOCK, VALVE ................................................................ 50 - 43

2E3 BEARINGS, FINAL DRIVE PINION SHAFT .................... 50 - 74 2D11 BLOCK, VALVE ................................................................ 50 - 55

2E5 BEARINGS, FINAL DRIVE PINION SHAFT .................... 50 - 76 1D1 BOLTS, CYLINDER HEAD .............................................. 24 - 18

1C21 BEARINGS, MAIN ............................................................ 24 - 13 1I7 BOSCH ALTERNATOR AND VOLTAGE REGULATOR

5C23 BEARINGS, TAILINGS ELEVATOR CONVEYOR .......... 125 -38 (95 AMP) ...................................................................... 40 - 70

2C1 BEARINGS, TRANSMISSION .......................................... 50 - 18 1I5 BOSCH ALTERNATOR, SHEAVE AND BELT ................ 40 - 68

2C3 BEARINGS, TRANSMISSION PINION SHAFT................ 50 - 20 3H24 BOX, TOOL ...................................................................... 90 - 22

5G15 BEATER BELTS SHEAVES ............................................ 170 -5 3F13 BRACE, ENGINE ACCESS PLATFORM ........................ 80 - 12

4E24 BEATER COVER .............................................................. 120 -34 1B15 BRACE, ENGINE FAN DRIVES (HI POWER) ................ 20 - 10

4I19 BEATER DRIVE SHEAVES AND TIGHTENER .............. 121 -50 3G5 BRACE, FRONT CORNER SHEET (R.H.) ...................... 80 - 30

4E3 BEATER GRATE CURTAIN ............................................ 120 -12 3G7 BRACE, REAR CORNER SHEET.................................... 80 - 32

4E22 BEATER SHAFT AND DRIVE BELT................................ 120 -32 4B17 BRACE, VARIABLE SPEED DRIVE TIGHTENER .......... 110 -10

5F23 BELT GUIDE, UNLOADING AUGER DRIVE .................. 130 -60 3C18 BRACKET, ACCUMULATOR MOUNTING

4J5 BELT PICKUP / REEL DRIVE, PUMP MOUNTING ONE HALF GALLON .................................................... 70 - 38

SHEAVE ........................................................................ 121 -60 1F7 BRACKET, AIR CLEANER .............................................. 30 - 10

1E19 BELT TENSIONER (ALT.) ................................................ 24 - 60 1E19 BRACKET, ALTERNATOR .............................................. 24 - 60

4I19 BELT, BEATER DRIVE .................................................... 121 -50 2F20 BRACKET, BRAKE CABLE SUPPORT .......................... 60 - 13

4B18 BELT, DRIVE TIGHTENER, FIXED SPEED.................... 110 -12 3F25 BRACKET, DRIVE SHIELD (R.H. REAR) ........................ 80 - 24

4E22 BELT, DRIVE, SHAFT AND BEATER.............................. 120 -32 4B20 BRACKET, DRIVE SHIELDS............................................ 110 -14

1B11 BELT, ENGINE FAN AND DRIVES ................................ 20 - 6 4B22 BRACKET, DRIVE SHIELDS, CONTOUR MASTER ...... 110 -16

4D3 BELT, FAN, DUST, LH FEEDER HOUSE ...................... 110 -48 4C12 BRACKET, FEEDER CONVEYOR .................................. 110 -32

4J13 BELT, FINE CUT STRAW CHOPPER (REAR) .............. 121 -68 4C16 BRACKET, FEEDER CONVEYOR DRIVE ...................... 110 -36

4J9 BELT, FINE CUT STRAW CHOPPER DRIVES .............. 121 -64 2G5 BRACKET, FRONT STEERING HOSES ........................ 60 - 22

3I17 BELT, OPERATOR’S SEAT ............................................ 90 - 40 2G7 BRACKET, L.H. STEERING LINES ................................ 60 - 24

1B7 BELT, ROTARY SCREEN DRIVE.................................... 20 - 2 3G11 BRACKET, MUD SHIELDS (R.H.).................................... 80 - 36

3I19 BELT, SEAT - RETROFIT KIT 3E13 BRACKET, OIL FILTER ASSEMBLY .............................. 70 - 86

(MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 42 2G9 BRACKET, R.H. STEERING LINES ................................ 60 - 26

3I18 BELT, SEAT - TRAINING SEAT ...................................... 90 - 41 3G7 BRACKET, REAR CORNER SHEET .............................. 80 - 32

4I21 BELT, SEPARATOR FAN DRIVE .................................... 121 -52 1J7 BRACKET, REEL SPEED MOTOR.................................. 40 - 96

4H17 BELT, SLOW SPEED CYLINDER DRIVE ...................... 121 -24 1H7 BRACKET, STRAW CHOPPER SENSOR ...................... 40 - 44

4J7 BELT, STRAW CHOPPER DRIVE (FRONT) .................. 121 -62 5C24 BRACKET, TAILINGS DRIVE AND LOWER

4J11 BELT, STRAW CHOPPER DRIVES (REAR) .................. 121 -66 TROUGH SUPPORT .................................................... 125 -39

4K1 BELT, STRAW CHOPPER ROTOR AND SHEAVE ........ 121 -80 5B12 BRACKETS, CHOP-TO-BALE .......................................... 125 -5A

5B18 BELT, STRAW SPREADER ............................................ 125 -8 4E20 BRACKETS, CONCAVE INDICATOR AND CABLE ........ 120 -30

4D5 BELT, UPPER DRIVE SHAFT, FIXED SPEED .............. 110 -50 1H15 BRACKETS, LOW SHAFT SPEED SENSORS .............. 40 - 52

4B17 BELT, VARIABLE SPEED DRIVE TIGHTENER.............. 110 -10 3E11 BRACKETS, OIL COOLER, A/C CONDENSER .............. 70 - 84

5G13 BELTS, AIR CONDITIONER COMPRESSOR ................ 170 -3 3D18 BRACKETS, SOLENOID CONTROL VALVE .................. 70 - 66

5G12 BELTS, AUGER ................................................................ 170 -2 2F20 BRAKE CABLE SUPPORT BRACKET ............................ 60 - 13

5G15 BELTS, BEATER .............................................................. 170 -5 2F15 BRAKE CYLINDER, MASTER .......................................... 60 - 8

5G13 BELTS, CLEAN GRAIN ELEVATOR................................ 170 -3 2F11 BRAKE CYLINDERS, MASTER AND BRAKE PEDALS 60 - 4

5G12 BELTS, CONVEYOR FEEDER ........................................ 170 -2 2F13 BRAKE LINES, MASTER CYLINDER AND

5G13 BELTS, COOLING FAN .................................................... 170 -3 RESERVOIR ................................................................ 60 - 6

5G13 BELTS, CYLINDER DRIVE .............................................. 170 -3 2F9 BRAKE PEDAL AND SEAL, PARKING .......................... 60 - 2

5G13 BELTS, DRIVE, CYLINDER INTERMEDIATE ................ 170 -3 2F11 BRAKE PEDALS AND CYLINDERS, MASTER .............. 60 - 4

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-11

-2

PN=11

1A13

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

2F17 BRAKE SHOES AND DRUM 5B20 CHAFF SPREADER DISC (DUAL MOTOR).................... 125 -10

(LEFT-HAND ILLUSTRATED) ...................................... 60 - 10 5C7 CHAFF SPREADER LINES AND FITTINGS .................. 125 -22

2F19 BRAKE SLAVE CYLINDER .............................................. 60 - 12 3B15 CHAFF SPREADER MOTOR (EATON) .......................... 70 - 8

1I10 BREAKERS, CIRCUIT, ENGINE COMPARTMENT ........ 40 - 74 5C1 CHAFF SPREADER MOUNTING SUPPORT .................. 125 -16

1E23 BREATHER, FUEL TANK ................................................ 30 - 2 5B24 CHAFF SPREADER PAN AND SEALS .......................... 125 -14

1C11 BUSHING, CAMSHAFT .................................................... 24 - 2 5C13 CHAFF SPREADER PUMP .............................................. 125 -28

1C25 BUSHING, CAMSHAFT .................................................... 24 - 17 5C11 CHAFF SPREADER, HOSES, LINES AND MOTOR ...... 125 -26

1D10 BYPASS TUBES, OIL COOLER ...................................... 24 - 27 5C9 CHAFF SPREADER, LINES, HOSES, VALVE AND

1D11 BYPASS VALVE, OIL FILTER.......................................... 24 - 28 PUMP ............................................................................ 125 -24

4I15 CHAFFER DRIVE, JACKSHAFT, IDLER ........................ 121 -46

4I17 CHAFFER DRIVE, STRAW WALKER, CONVEYOR

C AUGERS AND SIEVE .................................................. 121

4F21 CHAFFER ELEMENT........................................................ 120 -58

3I5 CAB AIR FILTER AND HOUSING .................................. 90 - 28 4F23 CHAFFER EXTENSION ELEMENT ................................ 120 -60

1F15 CAB DOME LIGHT .......................................................... 40 - 1 4G1 CHAFFER FRAME ............................................................ 120 -62

3H14 CAB DOOR AND GLASS ................................................ 90 - 12 4F19 CHAFFER FRAME ARMS, PRECLEANER .................... 120 -56

3H12 CAB DOOR LATCH .......................................................... 90 - 10 4F15 CHAFFER FRAME, PRECLEANER ................................ 120 -52

3H4 CAB FLOOR MAT ............................................................ 90 - 2 4F13 CHAFFER, PRE-CLEANING ............................................ 120 -50

3H16 CAB FRAME AND SUPPORT .......................................... 90 - 14 4B15 CHAIN SPROCKET, FRONT SHAFT, REVERSER ........ 110 -8

3H10 CAB INTERIOR TRIM PANELS ...................................... 90 - 8 5C25 CHAIN TIGHTENER, LOWER TAILINGS AUGER .......... 125 -40

3I1 CAB LANDING AND MIRROR ........................................ 90 - 24 5D5 CHAIN TIGHTENER, UPPER TAILINGS DRIVE ............ 125 -46

3I3 CAB LANDING AND MIRROR (R.H.) .............................. 90 - 26 5D20 CHAIN, CONVEYOR, CLEAN GRAIN LOWER

1F15 CAB LIGHT, DOME .......................................................... 40 - 1 ELEVATOR .................................................................. 130 -4

3H4 CAB PANELS AND FLOOR MAT .................................... 90 - 2 5D22 CHAIN, CONVEYOR, CLEAN GRAIN LOWER

1F20 CAB POST INSTRUMENT PANEL .................................. 40 - 6 ELEVATOR .................................................................. 130 -6

3I7 CAB POST INSTRUMENT PANEL .................................. 90 - 30 5F16 CHAIN, CROSS AUGER .................................................. 130 -52

3H8 CAB REAR AND SIDE SEALS ........................................ 90 - 6 4C12 CHAIN, FEEDER CONVEYOR DRIVE ............................ 110 -32

3H18 CAB ROOF AND SUPPORTS.......................................... 90 - 16 4C16 CHAIN, FEEDER CONVEYOR DRIVE ............................ 110 -36

1F22 CAB ROOF LIGHTS ........................................................ 40 - 8 5F18 CHAIN, GRAIN TANK CROSS AUGERS ........................ 130 -54

3I22 CAB SEAT HEIGHT ADJUSTER (VERTICAL 5C23 CHAIN, TAILINGS ELEVATOR CONVEYOR .................. 125 -38

CONTROL).................................................................... 90 - 46 5D3 CHAIN, UPPER TAILINGS .............................................. 125 -44

3H6 CAB SOUND DEADENING, FOAM AND SEALS............ 90 - 4 5F20 CHANNEL, CROSS AUGER ............................................ 130 -56

1F16 CAB WIRING HARNESS .................................................. 40 - 2 5F16 CHANNEL, CROSS AUGER BEARING .......................... 130 -52

3H14 CAB, COMPLETE ............................................................ 90 - 12 1B21 CHANNEL, RADIATOR MOUNTING................................ 20 - 16

4E20 CABLE, CONCAVE INDICATOR, AND BRACKETS ...... 120 -30 4K3 CHANNEL, STRAW CHOPPER HOUSING .................... 121 -82

3I9 CABLE, GEARSHIFT LEVER .......................................... 90 - 32 1E23 CHANNEL, SUPPORTS, FUEL TANK ............................ 30 - 2

1I24 CABLE, WIRING .............................................................. 40 - 88 5F1 CHARGE HOUSING, VERTICAL UNLOADING AUGER 130 -36

1I9 CABLES, BATTERY.......................................................... 40 - 73 3E20 CHARGE PRESSURE HOSE .......................................... 70 - 94

2B12 CABLES, HYDROSTATIC DRIVE CONTROL ................ 50 - 4 5C3 CHECK VALVE, ROD AND KNOB, CHAFF

2D12 CAM LOBE MOTOR (STEERABLE MOTOR) ................ 50 - 56 SPREADER CONTROL................................................ 125 -18

2D19 CAM, CARRIER, AND PISTON (STEERABLE 5B14 CHOP-TO-DROP DECLUTCHING LEVER ...................... 125 -5C

MOTOR) ........................................................................ 50 - 64 5B15 CHOPPER COVER AND BRACKETS - CHOP-TO-

4B9 CAM, FRONT VARIABLE DRIVE SHEAVE .................... 110 -2 BALE ............................................................................ 125 -5D

4E12 CAM, SPIKE TOOTH CONCAVE .................................... 120 -22 5E24 CHUTE, GRAIN TANK CLEAN OUT .............................. 130 -34

1C25 CAMSHAFT ...................................................................... 24 - 17 1G3 CIGARETTE LIGHTER .................................................... 40 - 14

1C11 CAMSHAFT BUSHING .................................................... 24 - 2 1F20 CIRCUIT BOARD, CAB POST INSTRUMENT

1C25 CAMSHAFT BUSHING .................................................... 24 - 17 PANEL .......................................................................... 40 - 6

1C25 CAMSHAFT FOLLOWER.................................................. 24 - 17 3I7 CIRCUIT BOARD, CAB POST INSTRUMENT

1D3 CAMSHAFT FOLLOWER.................................................. 24 - 20 PANEL .......................................................................... 90 - 30

1C25 CAMSHAFT GEAR............................................................ 24 - 17 1I16 CIRCUIT BOARDS, CENTRAL ELECTRONICS

1E23 CAP, FILLER, FUEL TANK .............................................. 30 - 2 MODULE ...................................................................... 40 - 80

5E24 CAP, GRAIN TANK CLEAN OUT CHUTE ...................... 130 -34 1I10 CIRCUIT BREAKER RELAYS .......................................... 40 - 74

1C11 CAPS, MAIN BEARING .................................................... 24 - 2 1I10 CIRCUIT BREAKERS, ENGINE COMPARTMENT.......... 40 - 74

2D21 CAPS, YOKE AND PIVOTS (STEERABLE MOTOR) .... 50 - 66 1I1 CLAMPS, UNLOADING AUGER LIGHT .......................... 40 - 64

2D19 CARRIER, PISTON, AND CAM (STEERABLE 5D20 CLEAN GRAIN CONVEYOR CHAIN................................ 130 -4

MOTOR) ........................................................................ 50 - 64 5D22 CLEAN GRAIN CONVEYOR CHAIN................................ 130 -6

2E21 CASE DRAIN, 4-WHEEL DRIVE, HYDRAULIC 5E12 CLEAN GRAIN ELEVATOR DRIVE IDLER .................... 130 -22

LINES ............................................................................ 50 - 92 5E12 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER .......... 130 -22

5E24 CASE, VERTICAL AUGER LOWER GEAR .................... 130 -34 5E12 CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND

1I16 CENTRAL ELECTRONICS MODULE AND CIRCUIT IDLER ............................................................................ 130 -22

BOARDS ...................................................................... 40 - 80 5E10 CLEAN GRAIN ELEVATOR GEARCASE ........................ 130 -20

1I16 CENTRAL ELECTRONICS MODULE CIRCUIT 5E14 CLEAN GRAIN ELEVATOR SHIELDS, UPPER .............. 130 -24

BOARDS ...................................................................... 40 - 80 5E1 CLEAN GRAIN ELEVATOR UPPER SHAFT .................. 130 -10

5B22 CHAFF SPREADER (DUAL MOTOR) SHIELDS 5E1 CLEAN GRAIN ELEVATOR UPPER SHAFT,

AND HANDLES ............................................................ 125 -12 SPROCKET AND SHEAVE.......................................... 130 -10

5C3 CHAFF SPREADER CONTROL, CHECK VALVE, 5E1 CLEAN GRAIN ELEVATOR UPPER SHEAVE................ 130 -10

ROD AND KNOB .......................................................... 125 -18 5E1 CLEAN GRAIN ELEVATOR UPPER SPROCKET .......... 130 -10

10-12 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-48

PN=12

1A14

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

5D24 CLEAN GRAIN ELEVATOR, UPPER .............................. 130 -8 1H5 CONTOUR MASTER WIRING HARNESS ADAPTER .... 40 - 42

5E7 CLEAN GRAIN LOADING AUGER .................................. 130 -16 4C1 CONTOUR MASTER, FEEDER HOUSE SHELL,

5E3 CLEAN GRAIN LOADING AUGER HOUSING, UPPER 130 -12 WEAR PLATES AND SEALS ...................................... 110 -20

5E5 CLEAN GRAIN LOADING AUGER HOUSING, UPPER 130 -14 4C5 CONTOUR MASTER, LOCKOUT ASSEMBLY

5E9 CLEAN GRAIN LOADING AUGER, FOLD ...................... 130 -18 (OPTIONAL) .................................................................. 110 -24

5D18 CLEAN GRAIN LOWER AUGER .................................... 130 -2 2B12 CONTROL CABLES, HYDROSTATIC DRIVE ................ 50 - 4

5D18 CLEAN GRAIN LOWER AUGER AND HINGED DOOR 130 -2 1G3 CONTROL PANEL, OPERATOR’S ARMREST .............. 40 - 14

5D20 CLEAN GRAIN LOWER ELEVATOR .............................. 130 -4 1E3 CONTROL UNIT, ELECTRONIC ...................................... 24 - 44

5D22 CLEAN GRAIN LOWER ELEVATOR .............................. 130 -6 1I14 CONTROL UNIT, ELECTRONIC (ECU) ........................ 40 - 78

5D20 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR 2D25 CONTROL VALVE ............................................................ 50 - 70

CHAIN .......................................................................... 130 -4 2E1 CONTROL VALVE SOLENOID (FOUR-WHEEL DR.) .... 50 - 71

5D22 CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR 3C17 CONTROL VALVE, HEADER HEIGHT ............................ 70 - 37

CHAIN .......................................................................... 130 -6 3K1 CONTROL VALVE, HEATER .......................................... 90 - 76

5E24 CLEAN OUT CHUTE, GRAIN TANK .............................. 130 -34 2C19 CONTROL VALVE, HYDRO. DR. DISPLACMENT ........ 50 - 38

1F7 CLEANER, AIR AND INTAKE TUBES ............................ 30 - 10 1J9 CONVENIENCE OUTLET ................................................ 40 - 98

4I21 CLEANING FAN DRIVE, SEPARATOR .......................... 121 -52 1G5 CONVENIENCE OUTLET,KIT .......................................... 40 - 16

4F7 CLEANING FAN INTAKE SHIELDS ................................ 120 -44 3B25 CONVERSION PARTS, HUDRAULIC, 200 SERIES

4F9 CLEANING FAN INTAKE SHIELDS ................................ 120 -46 CUTTING PLATFORM.................................................. 70 - 19

4F11 CLEANING FAN INTAKE SHIELDS ................................ 120 -48 5G12 CONVEYOR AUGER BELTS, .......................................... 170 -2

4F5 CLEANING FAN LEAF SCREENS (CORN) .................... 120 -42 4I17 CONVEYOR AUGERS, SIEVE, CHAFFER DRIVE

4F7 CLEANING FANS AND SHROUDS ................................ 120 -44 AND STRAW WALKER ................................................ 121 -48

4F9 CLEANING FANS AND SHROUDS ................................ 120 -46 4I15 CONVEYOR AUGERS, STRAW WALKER, SIEVE AND

1J17 CLEANING SHOE LAMP INSTALLATION ...................... 40 - 106 CHAFFER DRIVE ........................................................ 121 -46

4C3 CLOSURE PLATES, FEEDER HOUSE - CONTOUR 5D20 CONVEYOR CHAIN, CLEAN GRAIN .............................. 130 -4

MASTER ...................................................................... 110 -22 5D22 CONVEYOR CHAIN, CLEAN GRAIN .............................. 130 -6

1E15 CLUTCH ASSEMBLY(STARTER) .................................... 24 - 56 1C2 COOLANT HEATER, ENGINE BLOCK ............................ 20 - 22

3K5 CLUTCH, COMPRESSOR R134A.................................... 90 - 80 1B19 COOLANT RECOVERY TANK ........................................ 20 - 14

4H11 CLUTCH, HEADER ELECTROMAGNETIC...................... 121 -18 1D6 COOLER, ENGINE OIL .................................................... 24 - 23

4C20 CLUTCH, SLIP, FEEDER HOUSE .................................. 110 -40 1F5 COOLER, FUEL ................................................................ 30 - 8

2G1 COLD WEATHER START BUTTON ................................ 60 - 18 3E11 COOLER, OIL.................................................................... 70 - 84

3J16 COLD WEATHER START BUTTON ................................ 90 - 66 3B19 COOLER, OIL, FEEDER HOUSE .................................... 70 - 12

1F6 COLD WEATHER STARTING AID .................................. 30 - 9 3B21 COOLER, OIL, FEEDER HOUSE GEARCASE .............. 70 - 14

3F9 COMPARTMENT, ENGINE .............................................. 80 - 8 5G13 COOLING FAN BELTS .................................................... 170 -3

3K7 COMPRESSOR PARTS 4I11 CORN AND SMALL GRAIN CONCAVE INDICATOR .... 121 -42

(650301- ) R134A .................................................. 90 - 82 5B8 CORN CURTAIN AND DEFLECTORS ............................ 125 -2

3K4 COMPRESSOR, A/C, HOSE ............................................ 90 - 79 4D22 CORN CYLINDER DOOR

5G13 COMPRESSOR, AIR CONDITIONING BELTS................ 170 -3 (ARGENTINA ONLY) .................................................... 120 -6

3K3 COMPRESSOR, AIR CONDITIONING, R134A .............. 90 - 78 3G9 CORNER SHEET (L.H.) FRONT...................................... 80 - 34

3K5 COMPRESSOR, CLUTCH R134A.................................... 90 - 80 3G5 CORNER SHEET, R.H. FRONT ...................................... 80 - 30

1I8 CONCAVE ADJUSTING MOTOR .................................... 40 - 72 3G7 CORNER SHEET, REAR (L.H.) ...................................... 80 - 32

3F3 CONCAVE CLEARANCE DOOR...................................... 80 - 2 4I7 COUNTERSHAFT DRIVE, SECONDARY........................ 121 -38

4E20 CONCAVE INDICATOR, CABLE AND BRACKETS ........ 120 -30 5F21 COUNTERSHAFT DRIVE, UNLOADING AUGER .......... 130 -58

4I11 CONCAVE INDICATOR, CORN AND SMALL GRAIN .... 121 -42 4H7 COUNTERSHAFT GEARCASE, PRIMARY .................... 121 -14

4E4 CONCAVE, RASP BAR AND GRATE ............................ 120 -14 4H9 COUNTERSHAFT, PRIMARY, GEARCASE .................... 121 -16

4E6 CONCAVE, RASP BAR AND GRATE ............................ 120 -16 1C1 COUPLING WITH HUB, ENGINE GEARCASE .............. 20 - 21

4E14 CONCAVE, SPIKE TOOTH .............................................. 120 -24 4E24 COVER, BEATER ............................................................ 120 -34

4E8 CONCAVE, SPIKE-TOOTH .............................................. 120 -18 5B15 COVER, CHOPPER - CHOP-TO-BALE .......................... 125 -5D

4E12 CONCAVE, SPIKE-TOOTH .............................................. 120 -22 3F9 COVER, ENGINE .............................................................. 80 - 8

3E11 CONDENSER, A/C............................................................ 70 - 84 3F11 COVER, ENGINE .............................................................. 80 - 10

1C18 CONNECTING RODS ...................................................... 24 - 10 1E19 COVER, FUEL INJECTION PUMP ACCESS .................. 24 - 60

1I18 CONNECTORS, ELECTRICAL, WEATHERPACK .......... 40 - 82 5F18 COVER, GRAIN TANK CROSS AUGERS ...................... 130 -54

1E5 CONNECTORS, FUEL INJECTION PUMP HOUSING .. 24 - 46 2C14 COVER, HYDROSTATIC DRIVE PUMP .......................... 50 - 33

1J5 CONNECTORS, HARNESS, UPPER, FOR ENGINE...... 40 - 94 2D5 COVER, HYDROSTATIC DRIVE PUMP .......................... 50 - 49

1J3 CONNECTORS, LOWER HARNESS FOR ENGINE ...... 40 - 92 2D1 COVER, HYDROSTATIC PUMP

1J1 CONNECTORS, SUPPLEMENTARY TERMINALS ........ 40 - 90 (PLANETARY) .............................................................. 50 - 44

3J9 CONSOLE GLOVE BOX AND ARM REST, R.H. .......... 90 - 58 2C12 COVER, HYDROSTATIC PUMP

1F18 CONSOLE PANEL, OVERHEAD...................................... 40 - 4 (RING AND PINION).................................................... 50 - 30

4C3 CONTOUR MASTER - FEEDER HOUSE FRAME, 2D15 COVER, INNER ................................................................ 50 - 60

TILT BEAM & CLOSURE PLATES.............................. 110 -22 1D6 COVER, OIL COOLER .................................................... 24 - 23

4D11 CONTOUR MASTER DRIVE SHAFT (FOR 444,494 2D18 COVER, QUILL AND BEARING (STEERABLE

CORN HEAD AND 914 BPU) ...................................... 110 -56 MOTOR) ........................................................................ 50 - 63

4D9 CONTOUR MASTER DRIVESHAFT ................................ 110 -54 1D4 COVER, ROCKER ARM .................................................. 24 - 21

3C13 CONTOUR MASTER HOSES, (L.H.) .............................. 70 - 32 1D19 COVER, THERMOSTAT .................................................. 24 - 36

4C7 CONTOUR MASTER LOCKOUT ADAPTER KIT (BELT 4D17 COVER, THRESHING CYLINDER .................................. 120 -1

PU & 4R CORN HEADS) ............................................ 110 -26 1C24 COVER, TIMING GEAR.................................................... 24 - 16

3E7 CONTOUR MASTER TILT CYLINDER ............................ 70 - 80 5F20 COVERS AND CHANNEL, CROSS AUGER .................. 130 -56

1H3 CONTOUR MASTER WIRING HARNESS ...................... 40 - 40 5C21 CRANK, TAILINGS ELEVATOR ...................................... 125 -36

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-13

PN=13

1A15

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1C4 CRANKCASE, ENGINE, OIL DRAIN................................ 20 - 24 5H6 DECALS, REAR ................................................................ 170 -22

4G13 CRANKS, STRAW WALKER, STRAW SPREADER 5H4 DECALS, REAR WHEEL .................................................. 170 -20

DRIVE AND SHIELD .................................................... 120 -74 5H1 DECALS, RIGHT-HAND.................................................... 170 -16

1C19 CRANKSHAFT .................................................................. 24 - 11 5G16 DECALS, SAFETY AND LOCATIONS ............................ 170 -6

1E13 CRANKSHAFT DAMPERS .............................................. 24 - 54 5G18 DECALS, SAFETY AND LOCATIONS ............................ 170 -8

1C24 CRANKSHAFT FRONT OIL SEAL .................................. 24 - 16 5G20 DECALS, SAFETY AND LOCATIONS ............................ 170 -10

1C20 CRANKSHAFT KIT, UNDERSIZE 5G22 DECALS, SAFETY AND LOCATIONS ............................ 170 -12

(CONNECTING ROD JOURNAL) ................................ 24 - 12 5G24 DECALS, SAFETY AND LOCATIONS ............................ 170 -14

1E13 CRANKSHAFT PULLEY AND DAMPERS ...................... 24 - 54 5H8 DECALS, TOP .................................................................. 170 -24

5F16 CROSS AUGER BEARING PLATE, L.H. ........................ 130 -52 4J17 DECK, SUPPORTS AND FINS, STRAW CHOPPER ...... 121 -72

5F20 CROSS AUGER COVERS AND CHANNEL .................... 130 -56 5B14 DECLUTCHING LEVER - CHOP-TO-DROP.................... 125 -5C

5F18 CROSS AUGERS, GRAIN TANK .................................... 130 -54 4D20 DEFLECTOR, CYLINDER DOOR .................................... 120 -4

3F3 CROSS BRACES, SEPARATOR .................................... 80 - 2 4B24 DEFLECTOR, FEEDER HOUSE FRAME ........................ 110 -18

5B24 CROSSBAR, CHAFF SPREADER PAN .......................... 125 -14 5B8 DEFLECTORS AND CORN CURTAIN ............................ 125 -2

3J15 CUP HOLDER .................................................................. 90 - 64 4J17 DEFLECTORS, STRAW CHOPPER DECK .................... 121 -72

4E3 CURTAIN, BEATER GRATE ............................................ 120 -12 4G9 DEFLECTORS, STRAW WALKERS ................................ 120 -70

5C15 CURTAIN, SPREADER .................................................... 125 -30 5G8 DIAL-A-MATIC ELECTRICAL HARNESS ........................ 160 -4

5E20 CURTAINS, GRAIN TANK................................................ 130 -30 5G6 DIAL-A-MATIC HEADER HEIGHT CONTROL

3B25 CUTTING PLATFORM , 200 SERIES CONVERSION HYDRAULIC LINE AND VALVE BLOCK .................... 160 -2

PARTS .......................................................................... 70 - 19 5G7 DIAL-A-MATIC HEADER HEIGHT CONTROL

1C11 CYLINDER BLOCK FITTINGS ........................................ 24 - 2 VALVE BLOCK SOLENOID ........................................ 160 -3

3F3 CYLINDER CLEARANCE DOOR .................................... 80 - 2 3C17 DIAL-A-MATIC HEADER HEIGHT CONTROL VALVE.... 70 - 37

4D17 CYLINDER COVER, THRESHING .................................. 120 -1 2F13 DIAPHRAGM, BRAKE LINES .......................................... 60 - 6

4D20 CYLINDER DOOR 2C5 DIFFERENTIAL GEARS .................................................. 50 - 22

(WITH CYLINDER BAFFLE) ........................................ 120 -4 2C5 DIFFERENTIAL SHAFTS .................................................. 50 - 22

4D22 CYLINDER DOOR, CORN 1D15 DIPSTICK, ENGINE OIL .................................................. 24 - 32

(ARGENTINA ONLY) .................................................... 120 -6 4B11 DIPSTICK, REVERSER GEARBOX ................................ 110 -4

4I5 CYLINDER DRIVE ADJUSTING BRACKET, 5B20 DISC, CHAFF SPREADER (DUAL MOTOR) .................. 125 -10

DUAL-RANGE .............................................................. 121 -36 2C19 DISPLACEMENT CONTROL VALVE, HYDRO. DR. ...... 50 - 38

4H19 CYLINDER DRIVE GEAR CASE, DUAL-RANGE............ 121 -26 3H12 DOOR LATCH, CAB ........................................................ 90 - 10

4I1 CYLINDER DRIVE INTERMEDIATE SHAFT 3G9 DOOR, (L.H.) FRONT CORNER SHEET ........................ 80 - 34

MOUNTING, DUAL-RANGE ........................................ 121 -32 3H14 DOOR, CAB AND GLASS ................................................ 90 - 12

4I3 CYLINDER DRIVE INTERMEDIATE SHEAVE, 5B10 DOOR, CHOPPER STRAW.............................................. 125 -4

DUAL-RANGE .............................................................. 121 -34 5D18 DOOR, CLEAN GRAIN LOWER AUGER ........................ 130 -2

4H23 CYLINDER DRIVE TIGHTENER, DUAL-RANGE ............ 121 -30 4D20 DOOR, CYLINDER

4H15 CYLINDER DRIVE, SINGLE RANGE .............................. 121 -22 (WITH CYLINDER BAFFLE) ........................................ 120 -4

4H17 CYLINDER DRIVE, SLOW SPEED .................................. 121 -24 4D22 DOOR, CYLINDER DOOR

1D1 CYLINDER HEAD ............................................................ 24 - 18 (ARGENTINA ONLY) .................................................... 120 -6

1D1 CYLINDER HEAD BOLTS ................................................ 24 - 18 3F7 DOOR, ENGINE ACCESS ................................................ 80 - 6

1D1 CYLINDER HEAD GASKET ............................................ 24 - 18 3F11 DOOR, ENGINE PLATFORM .......................................... 80 - 10

1E11 CYLINDER HEAD GASKET KIT ...................................... 24 - 52 3G1 DOOR, R.H. SERVICE ACCESS SHIELD ...................... 80 - 26

1C18 CYLINDER LINERS .......................................................... 24 - 10 3F7 DOOR, RADIATOR .......................................................... 80 - 6

4D24 CYLINDER SHEAR BAR .................................................. 120 -8 1B21 DOOR, RADIATOR ACCESS .......................................... 20 - 16

3D6 CYLINDER SPEED HYDRAULIC LINES AND HOSES .. 70 - 52 4E25 DOOR, SHOE GRAIN SUPPLY ...................................... 120 -36

3D11 CYLINDER SPEED, SOLENOID CONTROL VALVE ...... 70 - 58 5B10 DOOR, STRAW CHOPPER.............................................. 125 -4

4E10 CYLINDER THRESHING, SPIKE TOOTH ...................... 120 -20 5C21 DOOR, TAILINGS ELEVATOR HOUSING ...................... 125 -36

2F19 CYLINDER, BRAKE SLAVE ............................................ 60 - 12 5E14 DOOR, UPPER CLEAN GRAIN ELEVATOR .................. 130 -24

2F15 CYLINDER, BRAKE, MASTER ........................................ 60 - 8 4C8 DOOR, UPPER FEEDER HOUSE .................................. 110 -28

3E3 CYLINDER, DRIVE, GRAIN TANK UNLOADING............ 70 - 76 1D19 DRAIN VALVE, CYLINDER HEAD .................................. 24 - 36

3G1 CYLINDER, GAS, SERVICE ACCESS SHIELD .............. 80 - 26 1D13 DRAIN VALVE, OIL PAN .................................................. 24 - 30

3G3 CYLINDER, GAS, SERVICE ACCESS SHIELD .............. 80 - 28 5F23 DRIVE BELT GUIDE, UNLOADING AUGER .................. 130 -60

3C16 CYLINDER, HEADER LIFT .............................................. 70 - 35 5C24 DRIVE BRACKET, TAILINGS AND LOWER

3G7 CYLINDER, REAR CORNER SHEET .............................. 80 - 32 TROUGH SUPPORT .................................................... 125 -39

2G13 CYLINDER, STEERING .................................................... 60 - 30 5D5 DRIVE CHAIN TIGHTENER, UPPER TAILINGS ............ 125 -46

4E1 CYLINDER, THRESHING, RASP BAR ............................ 120 -10 2B12 DRIVE CONTROL CABLES, HYDROSTATIC ................ 50 - 4

3E7 CYLINDER, TILT - CONTOUR MASTER ........................ 70 - 80 1C19 DRIVE GEAR, OIL PUMP ................................................ 24 - 11

3E5 CYLINDER, UNLOADING AUGER SWING .................... 70 - 78 4I13 DRIVE GEARCASE, STRAW WALKER .......................... 121 -44

2F11 CYLINDERS, MASTER BRAKE AND BRAKE PEDALS 60 - 4 5E12 DRIVE IDLER, CLEAN GRAIN ELEVATOR .................... 130 -22

3D23 DRIVE PUMP, REEL BELT PICKUP .............................. 70 - 72

4D11 DRIVE SHAFT, CONTOUR MASTER (FOR 444,494

D CORN HEAD AND 914 BPU) ...................................... 110

4H5 DRIVE SHAFT, GEARCASE AND PRIMARY

1C19 DAMPER KEY .................................................................. 24 - 11 COUNTERSHAFT ........................................................ 121 -12

1E13 DAMPERS, CRANKSHAFT .............................................. 24 - 54 5B18 DRIVE SHAFT, STRAW SPREADER .............................. 125 -8

5H6 DECALS, FRONT .............................................................. 170 -22 2B19 DRIVE SHAFTS ................................................................ 50 - 11

5H4 DECALS, FRONT WHEEL................................................ 170 -20 2B20 DRIVE SHAFTS ................................................................ 50 - 12

5H2 DECALS, LEFT-HAND ...................................................... 170 -18 3F25 DRIVE SHIELD, R.H. REAR ............................................ 80 - 24

10-14 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-56

PN=14

1A16

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4B22 DRIVE SHIELDS, CONTOUR MASTER FEEDER 1H20 EITHER START SOLENOID ............................................ 40 - 58

HOUSE.......................................................................... 110 -16 1I20 ELECTRICAL CONNECTOR SERVICE KIT .................... 40 - 84

4B20 DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE .... 110 -14 1I22 ELECTRICAL CONNECTOR SERVICE KIT .................... 40 - 86

4J15 DRIVE SHIELDS, STRAW CHOPPER ............................ 121 -70 5G8 ELECTRICAL HARNESS, DIAL-A-MATIC........................ 160 -4

4K5 DRIVE SPROCKETS, STRAW CHOPPER...................... 121 -84 1J2 ELECTRICAL SERVICE OUTLET .................................... 40 - 91

5E12 DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR .......... 130 -22 1I18 ELECTRICAL TERMINALS AND CONNECTORS,

4J3 DRIVE TIGHTENER, FEEDER HOUSE .......................... 121 -58 WEATHERPACK .......................................................... 40 - 82

4B18 DRIVE TIGHTENER, FIXED SPEED FEEDER 4H11 ELECTROMAGNETIC HEADER CLUTCH ...................... 121 -18

HOUSE.......................................................................... 110 -12 1E3 ELECTRONIC CONTROL UNIT ...................................... 24 - 44

4B17 DRIVE TIGHTENER, VARIABLE SPEED ........................ 110 -10 1I14 ELECTRONIC CONTROL UNIT (ECU) .......................... 40 - 78

2B14 DRIVE WHEELS .............................................................. 50 - 6 1E3 ELECTRONIC FUEL INJECTION PUMP ........................ 24 - 44

2B15 DRIVE WHEELS, HIGH FLOATATION 1I16 ELECTRONICS MODULE, CENTRAL AND CIRCUIT

PLANETARY FINAL DRIVE ........................................ 50 - 7 BOARDS ...................................................................... 40 - 80

4J5 DRIVE, BELT PICKUP / REEL PUMP 4F21 ELEMENT, CHAFFER ...................................................... 120 -58

MOUNTING SHEAVE .................................................. 121 -60 4F23 ELEMENT, CHAFFER EXTENSION ................................ 120 -60

4I21 DRIVE, CLEANING FAN, SEPARATOR .......................... 121 -52 4G3 ELEMENT, SIEVE ............................................................ 120 -64

5F21 DRIVE, COUNTERSHAFT, UNLOADING AUGER .......... 130 -58 5E12 ELEVATOR DRIVE IDLER, CLEAN GRAIN .................... 130 -22

5G13 DRIVE, CYLINDER INTERMEDIATE, BELTS ................ 170 -3 5E12 ELEVATOR DRIVE TIGHTENER, CLEAN GRAIN .......... 130 -22

5G13 DRIVE, CYLINDER, BELTS.............................................. 170 -3 5E14 ELEVATOR SHIELDS, UPPER CLEAN GRAIN .............. 130 -24

4J1 DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE.... 121 -56 5G13 ELEVATOR, CLEAN GRAIN BELTS................................ 170 -3

4I9 DRIVE, GEARCASE, STRAW WALKER.......................... 121 -40 5D20 ELEVATOR, LOWER, CLEAN GRAIN ............................ 130 -4

2D8 DRIVE, HYDROSTATIC MOTOR, FIXED ........................ 50 - 52 5D22 ELEVATOR, LOWER, CLEAN GRAIN ............................ 130 -6

2C21 DRIVE, HYDROSTATIC MOTOR, FIXED 5C21 ELEVATOR, TAILINGS .................................................... 125 -36

(RING AND PINION).................................................... 50 - 40 5D24 ELEVATOR, UPPER CLEAN GRAIN .............................. 130 -8

2E13 DRIVE, HYDROSTATIC OIL HOSES, UPPER................ 50 - 84 3F7 ENGINE ACCESS DOOR, HANDRAILS, AND

2E9 DRIVE, HYDROSTATIC, LOWER OIL LINES RADIATOR DOOR........................................................ 80 - 6

(FOUR WHEEL DRIVE) .............................................. 50 - 80 3F13 ENGINE ACCESS PLATFORM AND STEP .................... 80 - 12

2E11 DRIVE, HYDROSTATIC, LOWER OIL LINES 1H22 ENGINE AIR FILTER WARNING SWITCH...................... 40 - 60

(TWO WHEEL DRIVE) ................................................ 50 - 82 1I6 ENGINE ALTERNATOR MOUNTING .............................. 40 - 69

4I7 DRIVE, SECONDARY COUNTERSHAFT........................ 121 -38 1C2 ENGINE BLOCK COOLANT HEATER ............................ 20 - 22

1B11 DRIVES, ENGINE FAN .................................................... 20 - 6 1I10 ENGINE CIRCUIT BREAKERS ........................................ 40 - 74

1B13 DRIVES, ENGINE FAN .................................................... 20 - 8 3F9 ENGINE COMPARTMENT................................................ 80 - 8

1B15 DRIVES, ENGINE FAN (HI POWER) .............................. 20 - 10 5G12 ENGINE DRIVE BELTS .................................................... 170 -2

4J7 DRIVES, STRAW CHOPPER (FRONT) .......................... 121 -62 1B11 ENGINE FAN DRIVES...................................................... 20 - 6

4J11 DRIVES, STRAW CHOPPER, (REAR) ............................ 121 -66 1B13 ENGINE FAN DRIVES...................................................... 20 - 8

4J9 DRIVES, STRAW CHOPPER, FINE CUT (FRONT) ...... 121 -64 1B15 ENGINE FAN DRIVES (HI POWER) .............................. 20 - 10

4J13 DRIVES, STRAW CHOPPER, FINE CUT (REAR) .......... 121 -68 1C1 ENGINE GEARCASE COUPLING WITH HUB ................ 20 - 21

4D9 DRIVESHAFT, CONTOUR MASTER .............................. 110 -54 3E13 ENGINE GEARCASE OIL FILTER ASSEMBLY .............. 70 - 86

1B13 DRIVESHAFT, ENGINE FAN DRIVES ............................ 20 - 8 3E15 ENGINE GEARCASE PRESSURE REGULATOR .......... 70 - 88

4F1 DRIVESHAFT, SHOE GRAIN SUPPLY AUGERS .......... 120 -38 3E17 ENGINE GEARCASE SOLENOID VALVE

2F17 DRUM, BRAKE.................................................................. 60 - 10 (PRESSURE REGULATOR) ........................................ 70 - 90

3C20 DUAL ACCUMULATOR, ONE HALF GALLON .............. 70 - 40 4G24 ENGINE GEARCASE- SEPARATOR DRIVE WET-

1I1 DUAL LEVEL MONITOR .................................................. 40 - 64 CLUTCH AND PUMP DRIVE SHAFT ........................ 121 -6

1I1 DUAL LEVEL MONITOR WIRING HARNESS ................ 40 - 64 4G20 ENGINE GEARCASE- STRAW CHOPPER,UNLOADING

2B16 DUAL WHEELS, WIDE-SPACED DRIVE AND SEPARATOR DRIVE GEAR .................. 121 -2

(PLANETARY FINAL DRIVE) ...................................... 50 - 8 4H1 ENGINE GEARCASE, SEPARATOR AND PUMP

4I5 DUAL-RANGE CYLINDER DRIVE ADJUSTING DRIVE .......................................................................... 121 -8

BRACKET...................................................................... 121 -36 4H3 ENGINE GEARCASE, SEPARATOR AND PUMP

4H19 DUAL-RANGE CYLINDER DRIVE GEAR CASE ............ 121 -26 DRIVE .......................................................................... 121 -10

4I1 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE 4G22 ENGINE GEARCASE, STRAW CHOPPER, UNLOAD-

SHAFT MOUNTING...................................................... 121 -32 ING DRIVE AND SEPARATOR DRIVE GEAR .......... 121 -4

4I3 DUAL-RANGE CYLINDER DRIVE INTERMEDIATE 1B23 ENGINE INTERCOOLER .................................................. 20 - 18

SHEAVE ........................................................................ 121 -34 1B25 ENGINE MOUNTS ............................................................ 20 - 20

4H23 DUAL-RANGE CYLINDER DRIVE TIGHTENER ............ 121 -30 1B25 ENGINE MOUNTS AND REAR SUPPORT .................... 20 - 20

4H21 DUAL-RANGE LOCKOUT ARM ...................................... 121 -28 1C10 ENGINE OIL (TORQ-GARD PLUS-50) ............................ 24 - 1

3I6 DUCTS, HEATER AND AIR CONDITIONING ................ 90 - 29 1D6 ENGINE OIL COOLER .................................................... 24 - 23

4D3 DUST FAN BELT, LH FEEDER HOUSE ........................ 110 -48 1D15 ENGINE OIL DIPSTICK .................................................... 24 - 32

4D1 DUST FAN, LH SIDE FEEDER HOUSE.......................... 110 -46 1D15 ENGINE OIL DIPSTICK TUBE ........................................ 24 - 32

3B19 DUST SUPPRESSSION, LUBE OIL PUMP .................... 70 - 12 1D11 ENGINE OIL FILTER ........................................................ 24 - 28

1H20 ENGINE OIL PRESSURE SENDING UNIT .................... 40 - 58

1D7 ENGINE OIL PUMP .......................................................... 24 - 24

E 1D9 ENGINE OIL PUMP INTAKE ............................................ 24

1C16 ENGINE OVERHAUL KIT ................................................ 24 - 8

1E3 E.C.U. ................................................................................ 24 - 44 3F11 ENGINE PLATFORM ........................................................ 80 - 10

1I12 ECU MOUNTING SUPPORT 1H22 ENGINE PLUGGED AIR FILTER WARNING SWITCH .. 40 - 60

( -XXXXXX) ............................................................ 40 - 76 3F9 ENGINE RAILS ................................................................ 80 - 8

1I14 ECU, ELECTRONIC CONTROL UNIT ............................ 40 - 78 1E11 ENGINE REBUILD GASKET KIT .................................... 24 - 52

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-15

- 26

PN=15

1A17

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1C13 ENGINE SERVICE PARTS, KEY .................................... 24 - 4 4D7 FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE,

1E17 ENGINE SPEED SENSOR .............................................. 24 - 58 MOUNTINGS (FIXED SPEED WITH REVERSER) .... 110 -52

1H18 ENGINE TACH SENSOR ................................................ 40 - 56 3B21 FEEDER HOUSE GEARCASE OIL COOLER ................ 70 - 14

1H20 ENGINE TEMP SWITCH .................................................. 40 - 58 3B23 FEEDER HOUSE GEARCASE OIL COOLER

1H20 ENGINE TEMPERATURE SENDING UNIT .................... 40 - 58 FITTINGS AND HOSES .............................................. 70 - 16

1H20 ENGINE, LOWER HARNESS .......................................... 40 - 58 3B17 FEEDER HOUSE OIL COOLER LUBE OIL PUMP ........ 70 - 10

1H18 ENGINE, UPPER HARNESS............................................ 40 - 56 3B19 FEEDER HOUSE OIL COOLER, LUBE OIL PUMP........ 70 - 12

2G1 ETHER START BUTTON ................................................ 60 - 18 3I11 FEEDER HOUSE REVERSER FOOT CONTROL .......... 90 - 34

3J16 ETHER START BUTTON ................................................ 90 - 66 4B13 FEEDER HOUSE REVERSER FOOT CONTROL .......... 110 -6

1J3 ETHER START CONNECTOR ........................................ 40 - 92 4C1 FEEDER HOUSE SHELL - CONTOUR MASTER .......... 110 -20

1F6 ETHER STARTING AID .................................................... 30 - 9 4C20 FEEDER HOUSE SLIP CLUTCH .................................... 110 -40

1D24 ETHER STARTING FITTINGS ........................................ 24 - 41 4D5 FEEDER HOUSE UPPER DRIVE SHAFT, SHEAVE,

3K1 EVAPORATOR/HEATER UNIT ........................................ 90 - 76 MOUNTING (FIXED SPEED WITH REVERSER) ...... 110 -50

1D23 EXHAUST MANIFOLD GASKETS.................................... 24 - 40 4C8 FEEDER HOUSE UPPER SHAFT .................................. 110 -28

1D23 EXHAUST MANIFOLD HEAT SHIELD ............................ 24 - 40 3B16 FEEDER HOUSE VARIABLE DRIVE HYDRAULIC

1D23 EXHAUST MANIFOLDS.................................................... 24 - 40 HOSE............................................................................ 70 - 9

1F9 EXHAUST PIPE AND MUFFLER .................................... 30 - 12 4C1 FEEDER HOUSE WEAR PLATES - CONTOUR

1D1 EXHAUST VALVE SHIELD .............................................. 24 - 18 MASTER ...................................................................... 110 -20

1D1 EXHAUST VALVES .......................................................... 24 - 18 4D18 FEEDER HOUSE/SEPARATOR SEAL, STONE

2B22 EXPORT, TRANSMISSION .............................................. 50 - 14 TRAP AND DOOR........................................................ 120 -2

3E1 EXTEND LINES, HOSES, UNLOADING AUGER............ 70 - 74 4C22 FEEDER HOUSE, UPPER COUNTERSHAFT

1C2 EXTENSION CORD, ENGINE BLOCK COOLANT VARIABLE DRIVE ........................................................ 110 -42

HEATER ........................................................................ 20 - 22 1F24 FIELD LIGHTING, AUXILIARY ........................................ 40 - 10

4F23 EXTENSION ELEMENT, CHAFFER ................................ 120 -60 1J13 FIELD LIGHTS .................................................................. 40 - 102

5E22 EXTENSIONS, GRAIN TANK .......................................... 130 -32 1F18 FIELD LIGHTS SWITCH, AUX, OPTIONAL .................... 40 - 4

1F7 FILTER, AIR AND INTAKE TUBES ................................ 30 - 10

3I5 FILTER, CAB AIR ............................................................ 90 - 28

F 1D11 FILTER, ENGINE OIL ...................................................... 24

1E9 FILTER, FUEL .................................................................. 24 - 50

3F23 FAN DRIVE SHIELD (L.H.) .............................................. 80 - 22 1F1 FILTER, FUEL PUMP ...................................................... 30 - 4

4I23 FAN DRIVE SPEED CONTROL LINKAGE ...................... 121 -54 3C15 FILTER, MAIN HYDRAULIC ............................................ 70 - 34

4J1 FAN DRIVE SPEED CONTROL SHEAVE LINKAGE...... 121 -56 3E13 FILTER, OIL, ENGINE GEARCASE ................................ 70 - 86

1E8 FAN DRIVE, FIXED .......................................................... 24 - 49 1C24 FILTER, WATER PUMP (WEEP HOLE) .......................... 24 - 16

1B13 FAN DRIVES, ENGINE .................................................... 20 - 8 3J20 FILTERS, AIR CONDITIONER AND HEATER AND

1B15 FAN DRIVES, ENGINE (HI POWER) .............................. 20 - 10 HOUSING...................................................................... 90 - 70

1E8 FAN PULLEY HUB............................................................ 24 - 49 3J20 FILTERS, HEATER AND AIR CONDITIONING AND

1E18 FAN PULLEY, AIR CONDITIONER COMPRESSOR ...... 24 - 59 HOUSING...................................................................... 90 - 70

3J22 FAN, AIR CONDITIONING/HEATER AND 2C7 FINAL DRIVE (RING AND PINION) ................................ 50 - 24

PRESSURIZING .......................................................... 90 - 72 2E2 FINAL DRIVE AXLE SHAFT ............................................ 50 - 72

5G14 FAN, CLEANING, BELTS ................................................ 170 -4 2E3 FINAL DRIVE AXLE SHAFT ............................................ 50 - 74

4I21 FAN, DRIVE, CLEANING, SEPARATOR ........................ 121 -52 2C9 FINAL DRIVE AXLE, GEAR AND BEARINGS

4D1 FAN, DUST, LH SIDE FEEDER HOUSE ........................ 110 -46 (RING AND PINION).................................................... 50 - 26

1B11 FAN, ENGINE.................................................................... 20 - 6 2E2 FINAL DRIVE BEARINGS ................................................ 50 - 72

4F7 FANS, CLEANING ............................................................ 120 -44 2C8 FINAL DRIVE BEARINGS

4F9 FANS, CLEANING ............................................................ 120 -46 (RING AND PINION).................................................... 50 - 25

4C18 FEED PLATE LATCH HANDLE ...................................... 110 -38 2C8 FINAL DRIVE HOUSING AND BRG. CAP

5G12 FEEDER CONVEYOR BELTS.......................................... 170 -2 (RING AND PINION).................................................... 50 - 25

4C12 FEEDER CONVEYOR BRACKET .................................... 110 -32 2E5 FINAL DRIVE INNER HOUSING...................................... 50 - 76

4C12 FEEDER CONVEYOR DRIVE CHAIN ............................ 110 -32 2E2 FINAL DRIVE OUTER HOUSING .................................... 50 - 72

4C14 FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER 2E3 FINAL DRIVE OUTER HOUSING .................................... 50 - 74

AND GUIDES................................................................ 110 -34 2E5 FINAL DRIVE PINION SHAFT ........................................ 50 - 76

4C12 FEEDER CONVEYOR IDLER .......................................... 110 -32 2E3 FINAL DRIVE PINION SHAFT BEARINGS .................... 50 - 74

1J11 FEEDER HOUSE BACKSHAFT SPEED SENSOR ........ 40 - 100 2E5 FINAL DRIVE PINION SHAFT BEARINGS .................... 50 - 76

5G14 FEEDER HOUSE BELTS ................................................ 170 -4 2E5 FINAL DRIVE PINION SHAFT GEARS .......................... 50 - 76

4B22 FEEDER HOUSE DRIVE SHIELDS - CONTOUR 2C10 FINAL DRIVE PINION, SHAFTS AND BEARINGS

MASTER ...................................................................... 110 -16 (RING AND PINION).................................................... 50 - 28

4B20 FEEDER HOUSE DRIVE SHIELDS AND SAFETY 2E2 FINAL DRIVE PLANETARY PINION ................................ 50 - 72

STOP ............................................................................ 110 -14 2E23 FINAL DRIVE SHAFT SHIELDS - PLANETARY

4J3 FEEDER HOUSE DRIVE TIGHTENER............................ 121 -58 FINAL DRIVE ................................................................ 50 - 94

4B18 FEEDER HOUSE DRIVE TIGHTENER (FIXED 2E22 FINAL DRIVE SHAFT SHIELDS - SINGLE

SPEED) ........................................................................ 110 -12 REDUCTION ................................................................ 50 - 93

4D3 FEEDER HOUSE DUST FAN BELT, LH ........................ 110 -48 4J23 FINE CUT ROTOR STRAW CHOPPER (PADDLED

4D1 FEEDER HOUSE DUST FAN, LH SIDE.......................... 110 -46 WIDE ............................................................................ 121 -78

4C10 FEEDER HOUSE FLOOR ................................................ 110 -30 4J21 FINE CUT ROTOR STRAW CHOPPER (STRAIGHT

4B24 FEEDER HOUSE FRAME ................................................ 110 -18 WIDE ............................................................................ 121 -76

4C3 FEEDER HOUSE FRAME, TILT BEAM & CLOSURE 4J9 FINE CUT STRAW CHOPPER DRIVES (FRONT) ........ 121 -64

PLATES, CONTOUR MASTER.................................... 110 -22 4J13 FINE CUT STRAW CHOPPER DRIVES (REAR) ............ 121 -68

10-16 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

- 28

PN=16

1A18

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4E16 FINGER GRATE, SPIKE-TOOTH .................................... 120 -26 1E1 FUEL LEAK-OFF LINES .................................................. 24 - 42

4F23 FINGERS, PLASTIC, CHAFFER ...................................... 120 -60 1E3 FUEL LEAK-OFF LINES .................................................. 24 - 44

4J17 FINS, SUPPORTS AND DECK, STRAW CHOPPER ...... 121 -72 1F1 FUEL PUMP, WATER SEPARATOR, AND FUEL

3B23 FITTINGS AND HOSES, OIL COOLER SENDER ...................................................................... 30 - 4

FEEDER HOUSE.......................................................... 70 - 16 1F1 FUEL SENDER ................................................................ 30 - 4

1C11 FITTINGS, CYLINDER BLOCK ........................................ 24 - 2 1E3 FUEL SHUT-OFF SOLENOID (FIP) ................................ 24 - 44

1D24 FITTINGS, ETHER STARTING ........................................ 24 - 41 1E23 FUEL TANK, SUPPORTS, AND FITTINGS .................... 30 - 2

1E23 FITTINGS, FUEL TANK .................................................... 30 - 2 1E6 FUEL TRANSFER PUMP (ROBERT BOSCH) ................ 24 - 47

3E8 FITTINGS, HOSES, TILT CYLINDER

CONTOUR MASTER .................................................... 70 - 81

1F3 FITTINGS, TANK FUEL LINES ........................................ 30 - 6 G

1E8 FIXED FAN DRIVE .......................................................... 24 - 49

2G17 FIXED REAR AXLE .......................................................... 60 - 36 1D4 GASKET ADHESIVE, ROCKER ARM COVER .............. 24 - 21

2G22 FIXED REAR AXLE STEERING TIE RODS.................... 60 - 41 1E11 GASKET KIT, CYLINDER HEAD .................................... 24 - 52

4B18 FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER .. 110 -12 1E11 GASKET KIT, ENGINE REBUILD .................................... 24 - 52

3E18 FLAT O-RING KIT, HYDRAULIC...................................... 70 - 92 1E11 GASKET KIT, SHORT BLOCK ........................................ 24 - 52

3H4 FLOOR MAT, CAB ............................................................ 90 - 2 1D1 GASKET, CYLINDER HEAD ............................................ 24 - 18

4C10 FLOOR, FEEDER HOUSE .............................................. 110 -30 1D16 GASKET, INTAKE MANIFOLD ........................................ 24 - 33

3B13 FLOW CONTROL VALVE, REEL DRIVE ........................ 70 - 6 1D11 GASKET, OIL FILTER HOUSING .................................... 24 - 28

5C5 FLOW CONTROL VALVE, REEL DRIVE ........................ 125 -20 1D13 GASKET, OIL PAN .......................................................... 24 - 30

1C23 FLYWHEEL........................................................................ 24 - 15 1D7 GASKET, OIL PUMP ........................................................ 24 - 24

1C23 FLYWHEEL HUB .............................................................. 24 - 15 1D9 GASKET, OIL PUMP INTAKE .......................................... 24 - 26

3H6 FOAM, SEALS AND SOUND DEADENING, CAB .......... 90 - 4 1C22 GASKET, REAR OIL SEAL .............................................. 24 - 14

1C25 FOLLOWER, CAMSHAFT ................................................ 24 - 17 1D4 GASKET, ROCKER ARM COVER .................................. 24 - 21

1D3 FOLLOWER, CAMSHAFT ................................................ 24 - 20 1D19 GASKET, THERMOSTAT ................................................ 24 - 36

3I11 FOOT PEDAL, FEEDER HOUSE REVERSER .............. 90 - 34 1C24 GASKET, TIMING GEAR COVER.................................... 24 - 16

4B13 FOOT PEDAL, FEEDER HOUSE REVERSER .............. 110 -6 1D21 GASKET, TURBOCHARGER .......................................... 24 - 38

3D14 FOUR STACK SOLENOID CONTROL VALVE .............. 70 - 62 1D19 GASKET, WATER MANIFOLD ........................................ 24 - 36

2E17 FOUR WHEEL DRIVE HYDRAULIC LINES AND HOS 1D17 GASKET, WATER PUMP ................................................ 24 - 34

ES, L.H. ........................................................................ 50 - 88 1D23 GASKETS, EXHAUST MANIFOLD .................................. 24 - 40

4F19 FRAME ARMS, PRECLEANER CHAFFER .................... 120 -56 4B11 GEAR BOX, REVERSER.................................................. 110 -4

3H16 FRAME, CAB AND SUPPORT ........................................ 90 - 14 4H19 GEAR CASE, DUAL-RANGE CYLINDER DRIVE............ 121 -26

5B20 FRAME, CHAFF SPREADER DISC ................................ 125 -10 5E24 GEAR CASE, VERTICAL AUGER LOWER .................... 130 -34

4G1 FRAME, CHAFFER .......................................................... 120 -62 1C25 GEAR, CAMSHAFT .......................................................... 24 - 17

4B24 FRAME, FEEDER HOUSE .............................................. 110 -18 4H19 GEAR, DUAL-RANGE CYLINDER DRIVE ...................... 121 -26

4C3 FRAME, FEEDER HOUSE, CONTOUR MASTER .......... 110 -22 2C9 GEAR, FINAL DRIVE

1B21 FRAME, RADIATOR ........................................................ 20 - 16 (RING AND PINION).................................................... 50 - 26

3F3 FRAME, SEPARATOR ...................................................... 80 - 2 1E3 GEAR, INJECTION PUMP................................................ 24 - 44

4G5 FRAME, SIEVE ................................................................ 120 -66 1C19 GEAR, OIL PUMP DRIVE ................................................ 24 - 11

1F23 FRONT AND REAR TURN AND TAIL LIGHTS .............. 40 - 9 1D7 GEAR, OIL PUMP DRIVE ................................................ 24 - 24

2B18 FRONT AXLE 4B11 GEAR, REVERSER GEARBOX ...................................... 110 -4

(PLANETARY FINAL DRIVE) ...................................... 50 - 10 1C23 GEAR, STARTER.............................................................. 24 - 15

2B17 FRONT AXLE 4I13 GEAR, STRAW WALKER DRIVE GEARCASE .............. 121 -44

(RING AND PINION FINAL DRIVE) ............................ 50 - 9 4I9 GEARCASE DRIVE, STRAW WALKER .......................... 121 -40

3G5 FRONT CORNER SHEET (R.H.) .................................... 80 - 30 5E10 GEARCASE, CLEAN GRAIN ELEVATOR ...................... 130 -20

3G9 FRONT CORNER SHEET AND DOOR (L.H.) ................ 80 - 34 4H5 GEARCASE, DRIVE SHAFT AND PRIMARY

1C24 FRONT OIL SEAL ............................................................ 24 - 16 COUNTERSHAFT ........................................................ 121 -12

4B15 FRONT SHAFT WITH REVERSER (VARIABLE) ............ 110 -8 4G24 GEARCASE, ENGINE ...................................................... 121 -6

3G13 FRONT SHIELD ASSEMBLY, LEFT SIDE ...................... 80 - 38 4H1 GEARCASE, ENGINE ...................................................... 121 -8

3G19 FRONT SHIELD ASSEMBLY, RIGHT SIDE .................... 80 - 44 4H3 GEARCASE, ENGINE ...................................................... 121 -10

2G5 FRONT STEERING HOSES AND LINES ........................ 60 - 22 5F9 GEARCASE, HORIZONTAL UNLOADING AUGER

4B9 FRONT VARIABLE DRIVE SHEAVE AND DRIVE .......................................................................... 130 -44

MOUNTINGS ................................................................ 110 -2 4H7 GEARCASE, PRIMARY COUNTERSHAFT .................... 121 -14

1D19 FRONT WATER MANIFOLD ............................................ 24 - 36 4H9 GEARCASE, PRIMARY COUNTERSHAFT .................... 121 -16

5H4 FRONT WHEEL DECALS ................................................ 170 -20 2C5 GEARS, DIFFERENTIAL .................................................. 50 - 22

1E9 FUEL CHECK VALVE ...................................................... 24 - 50 2E3 GEARS, FINAL DRIVE PINION SHAFT .......................... 50 - 74

1F5 FUEL COOLER ................................................................ 30 - 8 2E5 GEARS, FINAL DRIVE PINION SHAFT .......................... 50 - 76

1E9 FUEL FILTER .................................................................... 24 - 50 2C1 GEARS, TRANSMISSION ................................................ 50 - 18

1E9 FUEL FILTER BASE ........................................................ 24 - 50 2C3 GEARS, TRANSMISSION PINION .................................. 50 - 20

1E9 FUEL FILTER LINES ........................................................ 24 - 50 2B24 GEARSHIFT LEVER AND LINKAGE .............................. 50 - 16

1E1 FUEL INJ LINES .............................................................. 24 - 42 3I9 GEARSHIFT LEVER AND LINKAGE .............................. 90 - 32

1E7 FUEL INJECTION NOZZLE.............................................. 24 - 48 3H14 GLASS, CAB AND DOOR ................................................ 90 - 12

1E1 FUEL INJECTION NOZZLES (ROBERT BOSCH) .......... 24 - 42 3J9 GLOVE BOX AND ARM REST, R.H. .............................. 90 - 58

1E3 FUEL INJECTION PUMP.................................................. 24 - 44 5E20 GRAIN TANK AND CURTAINS........................................ 130 -30

1H18 FUEL INJECTION PUMP.................................................. 40 - 56 5E18 GRAIN TANK BASE.......................................................... 130 -28

1E19 FUEL INJECTION PUMP ACCESS COVER .................. 24 - 60 5F18 GRAIN TANK CROSS AUGERS ...................................... 130 -54

1E5 FUEL INJECTION PUMP HOUSING CONNECTORS .... 24 - 46 1I1 GRAIN TANK DUAL LEVEL MONITOR HARNESS........ 40 - 64

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-17

PN=17

1A19

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

5E22 GRAIN TANK EXTENSIONS ............................................ 130 -32 3C16 HEADER LIFT CYLINDER................................................ 70 - 35

4F17 GRAIN TANK LEAK KIT .................................................. 120 -54 3C11 HEADER LIFT LINES AND HOSES ................................ 70 - 30

1H24 GRAIN TANK LEVEL MONITOR...................................... 40 - 62 3D9 HEADER LIFT MODULE, SOLENOID CONTROL

1H24 GRAIN TANK LIGHT ........................................................ 40 - 62 VALVE .......................................................................... 70 - 56

5E16 GRAIN TANK TOP............................................................ 130 -26 2B10 HEADER LIFT/LOWER SWITCH .................................... 50 - 2

1H24 GRAIN TANK UNLOADING AUGER LIMIT SWITCH .... 40 - 62 3H10 HEADLINER, CAB ............................................................ 90 - 8

3E3 GRAIN TANK UNLOADING DRIVE CYLINDER.............. 70 - 76 1F5 HEAT EXCHANGER, FUEL.............................................. 30 - 8

3E3 GRAIN TANK UNLOADING DRIVE CYLINDER 1D23 HEAT SHIELD, EXHAUST MANIFOLD............................ 24 - 40

MOUNTING .................................................................. 70 - 76 1G11 HEATER AND AIR CONDITIONER SWITCH.................. 40 - 22

5F1 GRAIN TANK VERTICAL UNLOADING AUGER ............ 130 -36 3I6 HEATER AND AIR CONDITIONING DUCTS .................. 90 - 29

5F1 GRAIN TANK VERTICAL UNLOADING AUGER 3J20 HEATER AND AIR CONDITIONING HOUSING AND

HOUSING...................................................................... 130 -36 FILTERS........................................................................ 90 - 70

1H24 GRAIN TANK WIRING HARNESS, LIGHT, LIMIT 3K1 HEATER SYSTEM ............................................................ 90 - 76

SWITCH AND LEVEL MONITOR ................................ 40 - 62 1G9 HEATER WIRING HARNESS .......................................... 40 - 20

4E4 GRATE AND RASP BAR CONCAVE .............................. 120 -14 3J22 HEATER/AIR CONDITIONING AND

4E6 GRATE AND RASP BAR CONCAVE .............................. 120 -16 PRESSURIZING FAN .................................................. 90 - 72

4E3 GRATE CURTAIN, BEATER ............................................ 120 -12 1C2 HEATER, COOLANT, ENGINE BLOCK .......................... 20 - 22

4E16 GRATE, FINGER, SPIKE-TOOTH.................................... 120 -26 3I22 HEIGHT ADJUSTER, CAB SEAT .................................... 90 - 46

3I6 GRILLE, AIR DUCTS ........................................................ 90 - 29 2B15 HIGH FLOATATION DRIVE WHEELS

3F15 GRIP, REAR LADDER ...................................................... 80 - 14 PLANETARY FINAL DRIVE ........................................ 50 - 7

5B16 GUARD AND STRAW SPREADER MOUNTING ............ 125 -6 5D18 HINGED DOOR, LOWER AUGER, CLEAN GRAIN ........ 130 -2

5B18 GUARD, STRAW SPREADER ........................................ 125 -8 1I9 HOLDDOWN, BATTERY .................................................. 40 - 73

3G11 GUIDE, FAN DRIVE.......................................................... 80 - 36 3J15 HOLDER, CUP.................................................................. 90 - 64

4C14 GUIDES, TIGHTENER AND FEEDER CONVEYOR 3F19 HOOD, REAR.................................................................... 80 - 18

DRIVE CHAIN .............................................................. 110 -34 5F14 HORIZONTAL UNLOADING AUGER

(17- AND 20-FT.) .......................................................... 130 -50

5F9 HORIZONTAL UNLOADING AUGER DRIVE

H GEARCASE .................................................................. 130

5F12 HORIZONTAL UNLOADING AUGER HOUSING

3I3 HAND RAIL, R.H............................................................... 90 - 26 (EXPORT) (17 AND 20 FT.)........................................ 130 -48

3H12 HANDLE, CAB DOOR ...................................................... 90 - 10 5F10 HORIZONTAL UNLOADING AUGER HOUSING

3H16 HANDLE, FRONT CAB .................................................... 90 - 14 (20 FT.) ........................................................................ 130 -46

3G13 HANDLE, LEFT SIDE FRONT SHIELD .......................... 80 - 38 5F7 HORIZONTAL UNLOADING AUGER HUB SUPPORT .. 130 -42

3G11 HANDLE, MUD SHIELDS (R.H.) ...................................... 80 - 36 5F3 HORIZONTAL UNLOADING AUGER SWIVEL ................ 130 -38

3G15 HANDLE, RIGHT SIDE SHIELD ASSEMBLY.................. 80 - 40 2G1 HORN BUTTON ................................................................ 60 - 18

5B22 HANDLES AND SHIELDS, CHAFF SPREADER 3J16 HORN BUTTON ................................................................ 90 - 66

(DUAL MOTOR)............................................................ 125 -12 3C20 HOSE AND MOUNTING, DUAL ACCUMULATOR

3H20 HANDRAILS, OPERATOR’S PIVOTING PLATFORM .... 90 - 18 HALF GALLON ............................................................ 70 - 40

3F7 HANDRAILS, REAR LADDER LANDING ........................ 80 - 6 3K4 HOSE, A/C COMPRESSOR ............................................ 90 - 79

3K8 HARDWARE KIT, CAB .................................................... 90 - 84 3E20 HOSE, CHARGE PRESSURE.......................................... 70 - 94

1J3 HARNESS CONNECTORS, LOWER, FOR ENGINE...... 40 - 92 1B19 HOSE, COOLANT RECOVERY TANK ............................ 20 - 14

1J5 HARNESS CONNECTORS, UPPER, FOR ENGINE ...... 40 - 94 1C4 HOSE, ENGINE CRANKCASE OIL DRAIN .................... 20 - 24

1H7 HARNESS FOR REAR LIGHTS AND SHIELDS ............ 40 - 44 3B16 HOSE, HYDRAULIC, VARIABLE DRIVE, FEEDER

1H3 HARNESS WIRING, MAIN, L.H. CENTER ...................... 40 - 40 HOUSE.......................................................................... 70 - 9

1H20 HARNESS, LOWER, ENGINE .......................................... 40 - 58 1B23 HOSE, INTERCOOLER .................................................... 20 - 18

1E15 HARNESS, STARTER, WIRING ...................................... 24 - 56 3B23 HOSES AND FITTINGS, OIL COOLER

1H18 HARNESS, UPPER, ENGINE .......................................... 40 - 56 FEEDER HOUSE.......................................................... 70 - 16

1G9 HARNESS, WIRING, A/C, HEATER AND AIRSEAT ...... 40 - 20 3D6 HOSES AND LINES, CYLINDER SPEED ...................... 70 - 52

1I5 HARNESS, WIRING, ALTERNATOR .............................. 40 - 68 2E17 HOSES AND LINES, FOUR WHEEL DRIVE HYDRAU

1G1 HARNESS, WIRING, ARMREST...................................... 40 - 12 LIC, L.H. ........................................................................ 50 - 88

1F16 HARNESS, WIRING, CAB ................................................ 40 - 2 3C11 HOSES AND LINES, HEADER LIFT .............................. 70 - 30

1J9 HARNESS, WIRING, CONVENIENCE OUTLET ............ 40 - 98 2E15 HOSES AND LINES, HYDRO. OIL COOLER ................ 50 - 86

1H5 HARNESS, WIRING, MAIN, L.H. CENTER .................... 40 - 42 2E7 HOSES AND LINES, OIL, HYDROSTATIC DRIVE,

1H9 HARNESS, WIRING, R.H. MAIN ...................................... 40 - 46 LOWER (4 WHEEL DRIVE) ........................................ 50 - 78

1G7 HARNESS, WIRING, STEERING COLUMN .................... 40 - 18 3C1 HOSES AND LINES, REEL DRIVE, HYD., FRONT........ 70 - 20

1F20 HARVESTRAK GAUGE .................................................... 40 - 6 3B11 HOSES AND LINES, REEL DRIVE, HYDRAULIC,

3I7 HARVESTRAK GAUGE .................................................... 90 - 30 L.H. SIDE ...................................................................... 70 - 4

1H16 HARVESTRAK MONITOR WIRING HARNESS .............. 40 - 54 3C5 HOSES AND LINES, REEL LIFT .................................... 70 - 24

1D1 HEAD BOLT KIT .............................................................. 24 - 18 3C3 HOSES AND LINES, REEL PUMP .................................. 70 - 22

1D1 HEAD, CYLINDER ............................................................ 24 - 18 2G5 HOSES AND LINES, STEERING, FRONT ...................... 60 - 22

5G14 HEADER BELTS .............................................................. 170 -4 2G11 HOSES AND LINES, STEERING, REAR

4H11 HEADER ELECTROMAGNETIC CLUTCH ...................... 121 -18 (DUAL CYLINDER) ...................................................... 60 - 28

5G7 HEADER HEIGHT CONTROL VALVE ............................ 160 -3 1B17 HOSES AND RADIATOR ................................................ 20 - 12

5G6 HEADER HEIGHT CONTROL, DIAL-A-MATIC 3C13 HOSES, CONTOUR MASTER (L.H.) .............................. 70 - 32

HYDRAULIC LINE AND VALVE BLOCK .................... 160 -2 3E8 HOSES, FITTINGS, TILT CYLINDER

5G8 HEADER HEIGHT CONTROL, ELECTRIC CONTOUR MASTER .................................................... 70 - 81

HARNESS, DIAL-A-MATIC .......................................... 160 -4 1F3 HOSES, FUEL LINES, TANK .......................................... 30 - 6

10-18 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-44

PN=18

1A20

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3E3 HOSES, GRAIN TANK UNLOADING DRIVE 3D21 HYDRAULIC PUMP, MAIN .............................................. 70 - 70

CYLINDER.................................................................... 70 - 76 3C24 HYDRAULIC RETURN LINES .......................................... 70 - 44

3K1 HOSES, HEATER ............................................................ 90 - 76 3D3 HYDRAULIC/HYDROSTATIC OIL RESERVOIR.............. 70 - 48

5C11 HOSES, LINES AND MOTOR, CHAFF SPREADER ...... 125 -26 2B10 HYDRO LEVER ASSEMBLY ............................................ 50 - 2

3C7 HOSES, LINES, REEL (FORE-AND_AFT), FRONT........ 70 - 26 2C19 HYDRO. DR. DISPLACEMENT CONTROL VALVE ........ 50 - 38

2G7 HOSES, LINES, STEERING, L.H. SIDE .......................... 60 - 24 2E15 HYDRO. OIL COOLER LINES AND HOSES .................. 50 - 86

5D14 HOSES, LUBE, L. H. ........................................................ 125 -56 2D6 HYDROSTATIC DRIVE CHARGE PUMP

5D12 HOSES, LUBE, R. H......................................................... 125 -54 (PLANETARY) .............................................................. 50 - 50

3E11 HOSES, OIL COOLER, A/C CONDENSER .................... 70 - 84 2D7 HYDROSTATIC DRIVE CHARGE PUMP

2E9 HOSES, OIL, HYDROSTATIC DRIVE, LOWER (PLANETARY) .............................................................. 50 - 51

(FOUR WHEEL DRIVE) .............................................. 50 - 80 2C17 HYDROSTATIC DRIVE CHARGE PUMP

2E11 HOSES, OIL, HYDROSTATIC DRIVE, LOWER (RING AND PINION).................................................... 50 - 36

(TWO WHEEL DRIVE) ................................................ 50 - 82 2C18 HYDROSTATIC DRIVE CHARGE PUMP

2E13 HOSES, OIL, HYDROSTATIC DRIVE, UPPER .............. 50 - 84 (RING AND PINION).................................................... 50 - 37

3D4 HOSES, PRESSURE ........................................................ 70 - 50 2B12 HYDROSTATIC DRIVE CONTROL CABLES .................. 50 - 4

2F23 HOSES, STEERING, UPPER .......................................... 60 - 16 2B10 HYDROSTATIC DRIVE LEVER AND CABLE ................ 50 - 2

3E1 HOSES, UNLOADING AUGER SWING CYLINDER ...... 70 - 74 2F1 HYDROSTATIC DRIVE MOTOR ...................................... 50 - 96

3D1 HOSES, UPPER RETURN, RESERVOIR........................ 70 - 46 2D8 HYDROSTATIC DRIVE MOTOR, FIXED ........................ 50 - 52

2E19 HOSES, 4-WHEEL DRIVE................................................ 50 - 90 2C21 HYDROSTATIC DRIVE MOTOR, FIXED

4K3 HOUSING AND KNIFEBANK, STRAW CHOPPER ........ 121 -82 (RING AND PINION).................................................... 50 - 40

4F1 HOUSING AND SHOE GRAIN SUPPLY AUGERS ........ 120 -38 2D10 HYDROSTATIC DRIVE MOTOR, KIT

4F3 HOUSING AND SHOE GRAIN SUPPLY AUGERS ........ 120 -40 (PLANETARY) .............................................................. 50 - 54

1E5 HOUSING CONNECTORS, FUEL INJECTION PUMP .. 24 - 46 2C23 HYDROSTATIC DRIVE MOTOR, KIT

2B23 HOUSING COVER, TRANSMISSION AND (RING AND PINION).................................................... 50 - 42

DIFFERENTIAL ............................................................ 50 - 15 2E13 HYDROSTATIC DRIVE OIL HOSES, UPPER ................ 50 - 84

3J20 HOUSING, AIR CONDITIONER/HEATER AND 2E9 HYDROSTATIC DRIVE OIL LINES AND HOSES,

FILTERS........................................................................ 90 - 70 LOWER (FOUR WHEEL DRIVE) ................................ 50 - 80

3I5 HOUSING, CAB AIR FILTER .......................................... 90 - 28 2E11 HYDROSTATIC DRIVE OIL LINES AND HOSES,

5F1 HOUSING, CHARGE, VERTICAL UNLOADING LOWER (TWO WHEEL DRIVE) .................................. 50 - 82

AUGER.......................................................................... 130 -36 2E7 HYDROSTATIC DRIVE OIL LINES AND HOSES,

2C8 HOUSING, FINAL DRIVE LOWER (4 WHEEL DRIVE) ........................................ 50 - 78

(RING AND PINION).................................................... 50 - 25 2F3 HYDROSTATIC DRIVE PUMP - MAIN HYDRAULIC

4B15 HOUSING, FRONT SHAFT .............................................. 110 -8 PUMP CONNECTING HARDWARE ............................ 50 - 98

3J20 HOUSING, HEATER/AIR CONDITIONING AND 2C14 HYDROSTATIC DRIVE PUMP COVER .......................... 50 - 33

FILTERS........................................................................ 90 - 70 2D5 HYDROSTATIC DRIVE PUMP COVER .......................... 50 - 49

5F12 HOUSING, HORIZONTAL UNLOADING AUGER 2D1 HYDROSTATIC DRIVE PUMP COVER

(EXPORT) (17 AND 20 FT.)........................................ 130 -48 (PLANETARY) .............................................................. 50 - 44

5F10 HOUSING, HORIZONTAL UNLOADING AUGER 2C12 HYDROSTATIC DRIVE PUMP COVER

(20 FT.) ........................................................................ 130 -46 (RING AND PINION).................................................... 50 - 30

2D3 HOUSING, HYDROSTATIC PUMP .................................. 50 - 46 2D1 HYDROSTATIC DRIVE PUMP SHAFT

2C15 HOUSING, HYDROSTATIC PUMP (PLANETARY) .............................................................. 50 - 44

(RING AND PINION).................................................... 50 - 34 2C12 HYDROSTATIC DRIVE PUMP SHAFT

1D11 HOUSING, OIL FILTER .................................................... 24 - 28 (RING AND PINION).................................................... 50 - 30

2E2 HOUSING, OUTER, FINAL DRIVE .................................. 50 - 72 3D3 HYDROSTATIC/HYDRAULIC RESERVOIR .................... 70 - 48

1C22 HOUSING, REAR OIL SEAL ............................................ 24 - 14

4B11 HOUSING, REVERSER GEARBOX ................................ 110 -4

2G21 HOUSING, SPINDLE, REAR AXLE ................................ 60 - 40 I

5C21 HOUSING, TAILINGS ELEVATOR .................................. 125 -36

1D19 HOUSING, THERMOSTAT, FRONT ................................ 24 - 36 1B7 IDLER ARMS, ROTARY SCREEN DRIVE ...................... 20 - 2

2B21 HOUSING, TRANSMISSION AND DIFFERENTIAL ........ 50 - 13 1E18 IDLER PULLEY, AIR CONDITIONER COMPRESSOR .. 24 - 59

5D3 HOUSING, UPPER TAILINGS AUGER .......................... 125 -44 4I19 IDLER, BEATER DRIVE .................................................. 121 -50

5F7 HUB SUPPORT, HORIZONTAL UNLOADING AUGERQ 130 -42 4B18 IDLER, DRIVE TIGHTENER, FIXED SPEED .................. 110 -12

4J5 HUB, CHARGE PUMP MOUNTING ................................ 121 -60 5E12 IDLER, DRIVE, CLEAN GRAIN ELEVETOR .................. 130 -22

1C1 HUB, COUPLING, ENGINE GEARCASE ........................ 20 - 21 4H23 IDLER, DUAL RANGE, DRIVE TIGHTENER .................. 121 -30

1E8 HUB, FAN PULLEY .......................................................... 24 - 49 4C12 IDLER, FEEDER CONVEYOR ........................................ 110 -32

1C23 HUB, FLYWHEEL.............................................................. 24 - 15 4C16 IDLER, FEEDER CONVEYOR DRIVE CHAIN ................ 110 -36

1B9 HUB, ROTARY SCREEN DOOR .................................... 20 - 4 4J9 IDLER, FINE CUT STRAW CHOPPER DRIVES ............ 121 -64

4C20 HUB, SLIP CLUTCH ........................................................ 110 -40 4J7 IDLER, STRAW CHOPPER DRIVE ................................ 121 -62

4I17 HUB, STRAW WALKER DRIVE ...................................... 121 -48 5B18 IDLER, STRAW SPREADER............................................ 125 -8

4I9 HUB, STRAW WALKER DRIVE GEARCASE.................. 121 -40 4I15 IDLER, STRAW WALKER DRIVE .................................... 121 -46

5F21 HUB, UNLOADING AUGER COUNTERSHAFT DRIVE .. 130 -58 4B17 IDLER, VARIABLE SPEED DRIVE TIGHTENER ............ 110 -10

3C15 HYDRAULIC FILTER, MAIN ............................................ 70 - 34 2G1 IGNITION SWITCH .......................................................... 60 - 18

2E17 HYDRAULIC LINES AND HOSES, L.H., FOUR WH 3J16 IGNITION SWITCH .......................................................... 90 - 66

EEL DRIVE .................................................................. 50 - 88 4E20 INDICATOR CABLE AND BRACKETS, CONCAVE ........ 120 -30

2E21 HYDRAULIC LINES, CASE DRAIN, 4-WHEEL 4I11 INDICATOR, CONCAVE, CORN AND SMALL GRAIN .. 121 -42

DRIVE .......................................................................... 50 - 92 4E18 INDICATOR, SPIKE TOOTH ............................................ 120 -28

1H18 HYDRAULIC OIL TEMP. SWITCH .................................. 40 - 56 1E3 INJECTION PUMP GEAR ................................................ 24 - 44

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-19

PN=19

1A21

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1E3 INJECTION PUMP LUBE LINE ........................................ 24 - 44 4K3 KNIFEBANK AND HOUSING, STRAW CHOPPER ........ 121 -82

1E3 INJECTION PUMP, ELECTRONIC FUEL ........................ 24 - 44

1H23 INLET AIR TEMPERATURE SWITCH ............................ 40 - 61

2D15 INNER COVER.................................................................. 50 - 60 L

2E5 INNER HOUSING, FINAL DRIVE .................................... 50 - 76

2C1 INPUT SHAFT, TRANSMISSION .................................... 50 - 18 1H1 L H MAIN WIRING HARNESS, L H FRONT .................. 40 - 38

1D1 INSERTS, VALVE SEAT .................................................. 24 - 18 1H7 L.H. AND R.H. MAIN WIRING HARNESS,

1F20 INSTRUMENT PANEL, CAB POST ................................ 40 - 6 L.H. AND R.H. REAR .................................................. 40 - 44

3I7 INSTRUMENT PANEL, CAB POST ................................ 90 - 30 1G24 L.H. MAIN WIRING HARNESS, FRONT.......................... 40 - 36

1D16 INTAKE MANIFOLD .......................................................... 24 - 33 1H3 L.H. MAIN WIRING HARNESS, L.H. CENTER .............. 40 - 40

1D16 INTAKE MANIFOLD GASKET .......................................... 24 - 33 2G7 L.H. SIDE HOSES AND LINES, STEERING .................. 60 - 24

4D13 INTAKE SHIELD................................................................ 110 -58 3H22 LADDER AND LATCH, OPERATOR’S PLATFORM ...... 90 - 20

4F7 INTAKE SHIELDS, CLEANING FAN ................................ 120 -44 3F15 LADDER, REAR ................................................................ 80 - 14

4F9 INTAKE SHIELDS, CLEANING FAN ................................ 120 -46 5E16 LADDER, TOP GRAIN TANK .......................................... 130 -26

1F7 INTAKE TUBES AND AIR CLEANER .............................. 30 - 10 1J20 LAMP ASSEMBLY, REAR - L.H. SIDE ............................ 40 - 109

1D1 INTAKE VALVES .............................................................. 24 - 18 1J19 LAMP ASSEMBLY, REAR - R.H. SIDE .......................... 40 - 108

1D9 INTAKE, ENGINE OIL PUMP .......................................... 24 - 26 1J17 LAMP, INSTALLATION .................................................... 40 - 106

1B23 INTERCOOLER ................................................................ 20 - 18 3H20 LANDING, OPERATOR’S PLATFORM ............................ 90 - 18

4I1 INTERMEDIATE SHAFT MOUNTING, CYLINDER 3I3 LANDING, R.H. ................................................................ 90 - 26

DRIVE, DUAL-RANGE.................................................. 121 -32 3F15 LANDING, REAR LADDER .............................................. 80 - 14

4I3 INTERMEDIATE SHEAVE, CYLINDER DRIVE, 3H22 LATCH AND LADDER, OPERATOR’S PLATFORM ...... 90 - 20

DUAL-RANGE .............................................................. 121 -34 3F17 LATCH ARM, REAR LADDER LANDING ........................ 80 - 16

4C18 LATCH HANDLE, FEED PLATE ...................................... 110 -38

3H12 LATCH, CAB DOOR ........................................................ 90 - 10

J 5E24 LATCH, GRAIN TANK CLEAN OUT CHUTE .................. 130

3F15 LATCH, REAR LADDER .................................................. 80 - 14

4I15 JACKSHAFT, STRAW WALKER DRIVE.......................... 121 -46 5B12 LATCHES, CHOP-TO-BALE ............................................ 125 -5A

4C20 JAW, SLIP CLUTCH ........................................................ 110 -40 4F5 LEAF SCREENS, CLEANING FAN (CORN) .................. 120 -42

1C11 JETS, PISTON COOLING ................................................ 24 - 2 4F17 LEAK KIT, GRAIN TANK .................................................. 120 -54

3G13 LEFT SIDE FRONT SHIELD ASSEMBLY ...................... 80 - 38

3G17 LEFT SIDE SHIELD ASSEMBLY .................................... 80 - 42

K 3J13 LEFT-HAND ARMREST .................................................... 90

5H2 LEFT-HAND DECALS ...................................................... 170 -18

1C13 KEY ENGINE SERVICE PARTS ...................................... 24 - 4 3I1 LEFT-HAND LANDING AND MIRROR ............................ 90 - 24

4K7 KEY STOCK, METRIC KIT .............................................. 121 -86 1I1 LEVEL MONITOR WIRING HARNESS, DUAL................ 40 - 64

1C19 KEY, DAMPER .................................................................. 24 - 11 1I1 LEVEL MONITOR, DUAL ................................................ 40 - 64

1G5 KIT-CONVENIENCE, OUTLET ........................................ 40 - 16 1H24 LEVEL MONITOR, GRAIN TANK .................................... 40 - 62

3J1 KIT, AIR SUSPENSION SEAT ........................................ 90 - 50 2B10 LEVER ASSEMBLY, GEARSHIFT .................................. 50 - 2

3J3 KIT, AIR SUSPENSION SEAT ........................................ 90 - 52 3I20 LEVER, ADJUSTER, OPERATOR’S SEAT .................... 90 - 44

3J5 KIT, AIR SUSPENSION SEAT ........................................ 90 - 54 5B14 LEVER, DECLUTCHING - CHOP-TO-DROP .................. 125 -5C

3J7 KIT, AIR SUSPENSION SEAT ........................................ 90 - 56 2B24 LEVER, GEARSHIFT ........................................................ 50 - 16

1E11 KIT, CYLINDER HEAD .................................................... 24 - 52 3I9 LEVER, GEARSHIFT ........................................................ 90 - 32

1I20 KIT, ELECTRICAL CONNECTOR SERVICE .................. 40 - 84 3C16 LIFT CYLINDER, HEADER .............................................. 70 - 35

1I22 KIT, ELECTRICAL CONNECTOR SERVICE .................. 40 - 86 1D5 LIFT STRAPS, ENGINE.................................................... 24 - 22

1C16 KIT, ENGINE OVERHAUL ................................................ 24 - 8 1J15 LIGHT SWITCH, SHOE ADJUSTING .............................. 40 - 104

1E11 KIT, ENGINE REBUILD .................................................... 24 - 52 1F15 LIGHT, CAB DOME .......................................................... 40 - 1

4F17 KIT, GRAIN TANK LEAK .................................................. 120 -54 1H24 LIGHT, GRAIN TANK........................................................ 40 - 62

1D1 KIT, HEAD BOLT .............................................................. 24 - 18 1I1 LIGHT, UNLOADING AUGER .......................................... 40 - 64

2D10 KIT, HYDROSTATIC DRIVE MOTOR 1G3 LIGHTER, CIGARETTE .................................................... 40 - 14

(PLANETARY) .............................................................. 50 - 54 1F24 LIGHTING, AUXILIARY FIELD ........................................ 40 - 10

2C23 KIT, HYDROSTATIC DRIVE MOTOR 1F22 LIGHTS, CAB ROOF ........................................................ 40 - 8

(RING AND PINION).................................................... 50 - 42 1J13 LIGHTS, FIELD ................................................................ 40 - 102

4C7 KIT, LOCKOUT ADAPTER - CONTOUR MASTER 1F23 LIGHTS, FRONT AND REAR TAIL .................................. 40 - 9

(BELT PU & 4R CORN HEADS) ................................ 110 -26 1F23 LIGHTS, FRONT AND REAR TURN .............................. 40 - 9

4K7 KIT, METRIC KEY STOCK .............................................. 121 -86 1I3 LIGHTS, SIDE FINDER .................................................... 40 - 66

1C18 KIT, PISTON/LINER .......................................................... 24 - 10 1J16 LIGHTS, TRANSPORT WARNING .................................. 40 - 105

3I19 KIT, RETROFIT SEAT BELT 4E3 LIMIT CURTAIN, BEATER GRATE .................................. 120 -12

(MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 42 4D1 LIMIT CURTAIN, DUST FAN............................................ 110 -46

4G11 KIT, STRAW WALKER BEARING.................................... 120 -72 1H24 LIMIT SWITCH, GRAIN TANK UNLOADING AUGER .... 40 - 62

1I24 KIT, TERMINAL AND WIRING ........................................ 40 - 88 1E3 LINE, INJECTION PUMP LUBE ...................................... 24 - 44

3F5 KIT, UPRIGHT NO.1 ........................................................ 80 - 4 1C18 LINER O-RINGS................................................................ 24 - 10

3F6 KIT, UPRIGHT NO.5 ........................................................ 80 - 5 1C18 LINER SHIM ...................................................................... 24 - 10

1D17 KIT, WATER PUMP SEAL................................................ 24 - 34 1C18 LINERS, CYLINDER ........................................................ 24 - 10

1C20 KIT,UNDERSIZE CRANKSHAFT 5C7 LINES AND FITTING, CHAFF SPREADER .................... 125 -22

(CONNECTING ROD JOURNAL) ................................ 24 - 12 3D6 LINES AND HOSES, CYLINDER SPEED ...................... 70 - 52

1E21 KIT,UNDERSIZED MAIN BEARING 2E17 LINES AND HOSES, FOUR WHEEL DRIVE HYDRAU

CRANKSHAFT .............................................................. 24 - 62 LIC, L.H. ........................................................................ 50 - 88

10-20 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-34

- 62

PN=20

1A22

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3C11 LINES AND HOSES, HEADER LIFT .............................. 70 - 30 5C17 LOWER TAILINGS AUGER SHAFT ................................ 125 -32

2E15 LINES AND HOSES, HYDRO. OIL COOLER ................ 50 - 86 5C17 LOWER TAILINGS AUGER SHAFT TIGHTENER .......... 125 -32

2E7 LINES AND HOSES, OIL, HYDROSTATIC DRIVE, 5C19 LOWER TAILINGS AUGER TROUGH ............................ 125 -34

LOWER (4 WHEEL DRIVE) ........................................ 50 - 78 5C24 LOWER TROUGH SUPPORT AND TAILINGS

3C1 LINES AND HOSES, REEL DRIVE, HYD., FRONT........ 70 - 20 DRIVE BRACKET ........................................................ 125 -39

3B11 LINES AND HOSES, REEL DRIVE, HYDRAULIC, 5G3 LUBE BANK, UNLOADING AUGER LOWER .................. 130 -66

L.H. SIDE ...................................................................... 70 - 4 5G1 LUBE BANK, UNLOADING AUGER UPPER .................. 130 -64

3C5 LINES AND HOSES, REEL LIFT .................................... 70 - 24 5D14 LUBE HOSES L. H. .......................................................... 125 -56

3C3 LINES AND HOSES, REEL PUMP .................................. 70 - 22 5D12 LUBE HOSES R. H........................................................... 125 -54

2G5 LINES AND HOSES, STEERING, FRONT ...................... 60 - 22 3B19 LUBE OIL PUMP WITH DUST SUPPRESSION ............ 70 - 12

2G11 LINES AND HOSES, STEERING, REAR 3B17 LUBE OIL PUMP, FEEDER HOUSE OIL COOLER........ 70 - 10

(DUAL CYLINDER) ...................................................... 60 - 28 2C1 LUBE PUMP, TRANSMISSION ........................................ 50 - 18

2E19 LINES AND HOSES, 4-WHEEL DRIVE .......................... 50 - 90

2F13 LINES, BRAKE, RESERVOIR, MASTER CYLINDER .... 60 - 6

1E9 LINES, FUEL FILTER ...................................................... 24 - 50 M

1E1 LINES, FUEL INJ .............................................................. 24 - 42

1E1 LINES, FUEL LEAK-OFF .................................................. 24 - 42 1E17 MAGNETIC PICK-UP (ENGINE) ...................................... 24 - 58

1E3 LINES, FUEL LEAK-OFF .................................................. 24 - 44 1C11 MAIN BEARING CAPS .................................................... 24 - 2

3C7 LINES, HOSES, REEL (FORE-AND-AFT), FRONT ........ 70 - 26 1C21 MAIN BEARINGS .............................................................. 24 - 13

2G7 LINES, HOSES, STEERING, L.H. SIDE .......................... 60 - 24 3F3 MAIN FRAME, SEPARATOR .......................................... 80 - 2

5C9 LINES, HOSES, VALVE AND PUMP, CHAFF 3D21 MAIN HYDRAULIC PUMP ................................................ 70 - 70

SPREADER .................................................................. 125 -24 2F3 MAIN HYDRAULIC PUMP - HYDROSTATIC DRIVE

3E9 LINES, HOSES, WET CLUTCH OIL COOLER .............. 70 - 82 PUMP CONNECTING HARDWARE ............................ 50 - 98

2E9 LINES, OIL, HYDROSTATIC DRIVE, LOWER 1G20 MAIN WIRING HARNESS, L.H. FRONT

(FOUR WHEEL DRIVE) .............................................. 50 - 80 (S.N. -680100) ...................................................... 40 - 32

2E11 LINES, OIL, HYDROSTATIC DRIVE, LOWER 1H5 MAIN WIRING HARNESS,L.H. CENTER ........................ 40 - 42

(TWO WHEEL DRIVE) ................................................ 50 - 82 2D17 MANIFOLD AND PACKINGS .......................................... 50 - 62

3D4 LINES, PRESSURE .......................................................... 70 - 50 3K3 MANIFOLD, A/C COMPRESSOR, R134A ...................... 90 - 78

3C9 LINES, REEL FORE-AND-AFT, L.H. SIDE ...................... 70 - 28 1D16 MANIFOLD, INTAKE ........................................................ 24 - 33

3C24 LINES, RETURN, HYDRAULIC ........................................ 70 - 44 1D19 MANIFOLD, WATER, FRONT .......................................... 24 - 36

2G9 LINES, STEERING R.H. SIDE ........................................ 60 - 26 1D23 MANIFOLDS, EXHAUST .................................................. 24 - 40

1F3 LINES, TANK FUEL .......................................................... 30 - 6 2F15 MASTER BRAKE CYLINDER .......................................... 60 - 8

1D21 LINES, TURBOCHARGER OIL ........................................ 24 - 38 2F13 MASTER CYLINDER, RESERVOIR, BRAKE LINES ...... 60 - 6

3E1 LINES, UNLOADING AUGER SWING CYLINDER ........ 70 - 74 2F11 MASTER CYLINDERS ...................................................... 60 - 4

3D1 LINES, UPPER RETURN, RESERVOIR .......................... 70 - 46 4K7 METRIC KEY STOCK KIT................................................ 121 -86

2B24 LINKAGE, GEARSHIFT .................................................... 50 - 16 3I1 MIRROR, LEFT-HAND REAR VIEW................................ 90 - 24

3I9 LINKAGE, GEARSHIFT .................................................... 90 - 32 3I3 MIRROR, R.H. .................................................................. 90 - 26

4J1 LINKAGE, SHEAVE, FAN DRIVE SPEED CONTROL.... 121 -56 1I16 MODULE, CENTRAL ELECTRONICS AND CIRCUIT

4I23 LINKAGE, SPEED CONTROL, FAN DRIVE .................... 121 -54 BOARDS ...................................................................... 40 - 80

5E7 LOADING AUGER, CLEAN GRAIN ................................ 130 -16 5F7 MODULE, HORIZONTAL UNLOADING AUGER ............ 130 -42

5E9 LOADING AUGER, CLEAN GRAIN, FOLD .................... 130 -18 1H3 MODULE, LOGIC .............................................................. 40 - 40

4C7 LOCKOUT ADAPTER KIT - CONTOUR MASTER 1H5 MODULE, LOGIC .............................................................. 40 - 42

(BELT PU & 4R CORN HEADS) ................................ 110 -26 3D8 MODULE, SOLENOID CONTROL RELIEF VALVE ........ 70 - 54

4H21 LOCKOUT ARM, DUAL-RANGE ...................................... 121 -28 1H16 MONITOR WIRING HARNESS, HARVESTRAK.............. 40 - 54

4C5 LOCKOUT ASSEMBLY - CONTOUR MASTER 1H24 MONITOR, LEVEL, GRAIN TANK.................................... 40 - 62

(OPTIONAL) .................................................................. 110 -24 5B20 MOTOR AND DISC, CHAFF SPREADER ...................... 125 -10

1H3 LOGIC MODULE .............................................................. 40 - 40 2F1 MOTOR DRIVE, HYDROSTATIC .................................... 50 - 96

1H5 LOGIC MODULE .............................................................. 40 - 42 1I8 MOTOR, ADJUSTING, CONCAVE .................................. 40 - 72

4F19 LOUVER, CHAFFER ........................................................ 120 -56 1I4 MOTOR, ADJUSTING, SEPARATOR FAN DRIVE ........ 40 - 67

4F13 LOUVER, PRECLEANING CHAFFER.............................. 120 -50 2D12 MOTOR, CAM LOBE (STEERABLE MOTOR) ................ 50 - 56

1H9 LOW SHAFT SPEED SENSOR ...................................... 40 - 46 3B15 MOTOR, CHAFF SPREADER (EATON).......................... 70 - 8

1H15 LOW SHAFT SPEED SENSORS AND BRACKETS ...... 40 - 52 2F1 MOTOR, HYDROSTATIC DRIVE .................................... 50 - 96

5D18 LOWER AUGER, CLEAN GRAIN .................................... 130 -2 2D8 MOTOR, HYDROSTATIC DRIVE, FIXED ........................ 50 - 52

5D20 LOWER ELEVATOR, CLEAN GRAIN .............................. 130 -4 2C21 MOTOR, HYDROSTATIC DRIVE, FIXED

5D22 LOWER ELEVATOR, CLEAN GRAIN .............................. 130 -6 (RING AND PINION).................................................... 50 - 40

1H20 LOWER HARNESS FOR ENGINE .................................. 40 - 58 1J7 MOTOR, REEL SPEED, AND BRACKET........................ 40 - 96

2E9 LOWER HYDROSTATIC DRIVE OIL LINES AND 5C1 MOUNTING SUPPORT, CHAFF SPREADER ................ 125 -16

HOSES (FOUR WHEEL DRIVE) ................................ 50 - 80 1I12 MOUNTING SUPPORT, ELECTRONIC CONTROL

2E11 LOWER HYDROSTATIC DRIVE OIL LINES AND UNIT ( -XXXXXX).................................................. 40 - 76

HOSES (TWO WHEEL DRIVE) .................................. 50 - 82 1I6 MOUNTING, ALTERNATOR ............................................ 40 - 69

2E7 LOWER HYDROSTATIC DRIVE OIL LINES AND 3E3 MOUNTING, GRAIN TANK UNLOADING DRIVE

HOSES (4 WHEEL DRIVE) ........................................ 50 - 78 CYLINDER.................................................................... 70 - 76

2G3 LOWER STEERING COLUMN ........................................ 60 - 20 3D3 MOUNTING, HYDRAULIC/HYDRO OIL RESERVOIR .... 70 - 48

5C17 LOWER TAILINGS AUGER .............................................. 125 -32 3C22 MOUNTING, ONE GALLON ACCUMULATOR ................ 70 - 42

5G15 LOWER TAILINGS AUGER BELT .................................. 170 -5 5B16 MOUNTING, STRAW SPREADER AND GUARD .......... 125 -6

5C25 LOWER TAILINGS AUGER CHAIN TIGHTENER .......... 125 -40 3E5 MOUNTING, UNLOADING AUGER SWING CYLINDER 70 - 78

5D1 LOWER TAILINGS AUGER DRIVE TIGHTENER .......... 125 -42

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-21

PN=21

1A23

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3D16 MOUNTINGS, FIVE STACK SOLENOID CONTROL 1D7 OIL PUMP DRIVE GEAR ................................................ 24 - 24

VALVE .......................................................................... 70 - 64 1D7 OIL PUMP GASKET ........................................................ 24 - 24

3D14 MOUNTINGS, FOUR STACK SOLENOID CONTROL 1D9 OIL PUMP INTAKE .......................................................... 24 - 26

VALVE .......................................................................... 70 - 62 1D9 OIL PUMP INTAKE GASKET .......................................... 24 - 26

3D19 MOUNTINGS, SIX STACK SOLENOID CONTROL 1D7 OIL PUMP, ENGINE ........................................................ 24 - 24

VALVE .......................................................................... 70 - 68 1C24 OIL SEAL, CRANKSHAFT FRONT .................................. 24 - 16

3F23 MUD AND FAN DRIVE SHIELDS (L.H.).......................... 80 - 22 1C22 OIL SEAL, REAR .............................................................. 24 - 14

2E24 MUD SHIELDS .................................................................. 50 - 95 3K3 OIL, A/C COMPRESSOR ................................................ 90 - 78

3F23 MUD SHIELDS (L.H.)........................................................ 80 - 22 1C10 OIL, ENGINE (TORQ-GARD, PLUS-50) .......................... 24 - 1

3G11 MUD SHIELDS (R.H.) ...................................................... 80 - 36 3C22 ONE GALLON ACCUMULATOR AND MOUNTING ........ 70 - 42

1F9 MUFFLER AND EXHAUST PIPE .................................... 30 - 12 1G3 OPERATOR’S ARMREST PANEL .................................. 40 - 14

1F18 OPERATOR’S OVERHEAD CONSOLE PANEL .............. 40 - 4

3H22 OPERATOR’S PLATFORM LADDER AND LATCH ........ 90 - 20

N 3H20 OPERATOR’S PLATFORM LANDING ............................ 90

3I15 OPERATOR’S SEAT AND BACKREST .......................... 90 - 38

3J9 NEUTRAL START SWITCH ............................................ 90 - 58 3I22 OPERATOR’S SEAT HEIGHT ADJUSTER .................... 90 - 46

3F5 NO. 1 UPRIGHT KIT ........................................................ 80 - 4 3I17 OPERATOR’S SEAT SEATBELT .................................... 90 - 40

3F6 NO. 5 UPRIGHT KIT ........................................................ 80 - 5 2E3 OUTER HOUSING FINAL DRIVE .................................... 50 - 74

1E7 NOZZLE, FUEL INJECTION ............................................ 24 - 48 1J9 OUTLET, CONVENIENCE ................................................ 40 - 98

1E1 NOZZLES, FUEL INJECTION (ROBERT BOSCH) ........ 24 - 42 1G5 OUTLET, CONVENIENCE, KIT ........................................ 40 - 16

1J2 OUTLET, ELECTRICAL SERVICE .................................. 40 - 91

1C16 OVERHAUL KIT, ENGINE ................................................ 24 - 8

O 1F18 OVERHEAD CONSOLE PANEL ...................................... 40

- 18

- 4

1D17 O-RING, WATER PUMP .................................................. 24 - 34

3K4 O-RINGS, A/C COMPRESSOR HOSE ............................ 90 - 79 P

3E18 O-RINGS, HYDRAULIC, FLAT ........................................ 70 - 92

1C18 O-RINGS, LINER .............................................................. 24 - 10 2D17 PACKINGS AND MANIFOLD .......................................... 50 - 62

3E11 OIL COOLER .................................................................... 70 - 84 3G3 PAD, SERVICE ACCESS SHIELD (L.H.) ........................ 80 - 28

1D6 OIL COOLER ADAPTER .................................................. 24 - 23 3G1 PAD, SERVICE ACCESS SHIELD (R.H.)........................ 80 - 26

1D10 OIL COOLER BYPASS ADAPTER .................................. 24 - 27 5D3 PADDLES, UPPER TAILINGS AUGER .......................... 125 -44

1D10 OIL COOLER BYPASS TUBES ...................................... 24 - 27 1D13 PAN, OIL .......................................................................... 24 - 30

1D6 OIL COOLER COVER ...................................................... 24 - 23 4G7 PAN, SHAKER .................................................................. 120 -68

2E15 OIL COOLER LINES AND HOSES, HYDRO. ................ 50 - 86 1G3 PANEL, ARMREST .......................................................... 40 - 14

3B17 OIL COOLER LUBE PUMP, FEEDER HOUSE .............. 70 - 10 1F20 PANEL, INSTRUMENT, CAB POST ................................ 40 - 6

1D6 OIL COOLER TUBES ...................................................... 24 - 23 3I7 PANEL, INSTRUMENT, CAB POST ................................ 90 - 30

1D6 OIL COOLER, ENGINE .................................................... 24 - 23 1F18 PANEL, OVERHEAD CONSOLE...................................... 40 - 4

3B19 OIL COOLER, FEEDER HOUSE .................................... 70 - 12 3H4 PANELS, CAB .................................................................. 90 - 2

3B21 OIL COOLER, FEEDER HOUSE GEARCASE ................ 70 - 14 3H10 PANELS, CAB INTERIOR TRIM ...................................... 90 - 8

3B23 OIL COOLER, FITTNGS AND HOSES 1H3 PARK BRAKE SWITCH .................................................... 40 - 40

FEEDER HOUSE.......................................................... 70 - 16 2F9 PARKING BRAKE PEDAL AND SEAL ............................ 60 - 2

1C4 OIL DRAIN, ENGINE CRANKCASE ................................ 20 - 24 1C13 PARTS, KEY ENGINE SERVICE .................................... 24 - 4

3E13 OIL FILTER ASSEMBLY, ENGINE GEARCASE ............ 70 - 86 3I13 PASSENGER SEAT .......................................................... 90 - 36

1D11 OIL FILTER BASE ............................................................ 24 - 28 2F9 PEDAL AND SEAL, PARKING BRAKE .......................... 60 - 2

1D11 OIL FILTER BYPASS VALVE .......................................... 24 - 28 3I11 PEDAL, REVERSER FOOT CONTROL, FEEDER

1D11 OIL FILTER HOUSING .................................................... 24 - 28 HOUSE.......................................................................... 90 - 34

1D11 OIL FILTER HOUSING GASKET .................................... 24 - 28 4B13 PEDAL, REVERSER FOOT CONTROL, FEEDER

1D11 OIL FILTER, ENGINE ...................................................... 24 - 28 HOUSE.......................................................................... 110 -6

2E9 OIL HOSES, HYDROSTATIC DRIVE, LOWER 2G3 PEDAL, STEERING COLUMN (LOWER) ........................ 60 - 20

(FOUR WHEEL DRIVE) .............................................. 50 - 80 2F11 PEDALS, BRAKE AND CYLINDERS, MASTER .............. 60 - 4

2E11 OIL HOSES, HYDROSTATIC DRIVE, LOWER 1E17 PICK-UP, MAGNETIC (ENGINE) .................................... 24 - 58

(TWO WHEEL DRIVE) ................................................ 50 - 82 2E3 PINION SHAFT BEARINGS, FINAL DRIVE .................... 50 - 74

2E13 OIL HOSES, UPPER, HYDROSTATIC DRIVE................ 50 - 84 2E5 PINION SHAFT BEARINGS, FINAL DRIVE .................... 50 - 76

2E7 OIL LINES AND HOSES, HYDROSTATIC DRIVE, 2E3 PINION SHAFT GEARS, FINAL DRIVE .......................... 50 - 74

LOWER (4 WHEEL DRIVE) ........................................ 50 - 78 2E5 PINION SHAFT GEARS, FINAL DRIVE .......................... 50 - 76

2E9 OIL LINES HYDROSTATIC DRIVE, LOWER 2C10 PINION, FINAL DRIVE

(FOUR WHEEL DRIVE) .............................................. 50 - 80 (RING AND PINION).................................................... 50 - 28

2E11 OIL LINES HYDROSTATIC DRIVE, LOWER 4I9 PINION, STRAW WALKER DRIVE GEARCASE ............ 121 -40

(TWO WHEEL DRIVE) ................................................ 50 - 82 4B11 PINIONS, REVERSER GEARBOX .................................. 110 -4

1D21 OIL LINES, TURBOCHARGER ........................................ 24 - 38 1C11 PISTON COOLING JETS ................................................ 24 - 2

1D13 OIL PAN ............................................................................ 24 - 30 1C18 PISTON RINGS ................................................................ 24 - 10

1D13 OIL PAN DRAIN VALVE .................................................. 24 - 30 1C18 PISTON/LINER KIT .......................................................... 24 - 10

1D13 OIL PAN GASKET ............................................................ 24 - 30 2D19 PISTON, CAM, AND CARRIER (STEERABLE

1D6 OIL PRESSURE REGULATING VALVE .......................... 24 - 23 MOTOR) ........................................................................ 50 - 64

1D11 OIL PRESSURE REGULATING VALVE .......................... 24 - 28 1C18 PISTON, ENGINE ............................................................ 24 - 10

1H20 OIL PRESSURE SENDING UNIT, ENGINE .................... 40 - 58 3E15 PISTON, PRESSURE REGULATOR................................ 70 - 88

1C19 OIL PUMP DRIVE GEAR ................................................ 24 - 11 4C22 PISTON, VARIABLE DRIVE COUNTERSHAFT .............. 110 -42

10-22 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

PN=22

1A24

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4J3 PIVOT, FEEDER HOUSE DRIVE TIGHTENER .............. 121 -58 3D23 PUMP, REEL BELT PICKUP, DRIVE .............................. 70 - 72

3H20 PIVOTING PLATFORM AND HANDRAILS ...................... 90 - 18 2F21 PUMP, STEERING ............................................................ 60 - 14

2D21 PIVOTS, CAPS AND YOKE (STEERABLE MOTOR) .... 50 - 66 2G3 PUMP, STEERING............................................................ 60 - 20

2B16 PLANETARY FINAL DRIVE WIDE-SPACED 1D17 PUMP, WATER ................................................................ 24 - 34

DUAL WHEELS............................................................ 50 - 8 3I11 PUSH PULL CABLE, REVERSER FOOT CONTROL .... 90 - 34

2E3 PLANETARY PINION, AND BEARINGS.......................... 50 - 74 1D3 PUSH RODS .................................................................... 24 - 20

2E2 PLANETARY PINION, FINAL DRIVE .............................. 50 - 72

2B22 PLANETARY, TRANSMISSION........................................ 50 - 14

5F16 PLATE, CROSS AUGER BEARING, L.H......................... 130 -52 Q

4C3 PLATES, CLOSURE, FEEDER HOUSE - CONTOUR

MASTER ...................................................................... 110 -22 2D18 QUILL, BEARING AND COVER (STEERABLE

4C1 PLATES, WEAR, FEEDER HOUSE - CONTOUR MOTOR)........................................................................ 50 - 63

MASTE .......................................................................... 110 -20

3H20 PLATFORM AND HANDRAILS, PIVOTING .................... 90 - 18

3F13 PLATFORM AND STEP, ENGINE ACCESS .................. 80 - 12 R

3H22 PLATFORM LADDER AND LATCH, OPERATOR’S ...... 90 - 20

3F9 PLATFORM, ENGINE ...................................................... 80 - 8 1H9 R.H. MAIN WIRING HARNESS ........................................ 40 - 46

3F11 PLATFORM, ENGINE ...................................................... 80 - 10 2G9 R.H. SIDE STEERING LINES .......................................... 60 - 26

3F15 PLATFORM, REAR LADDER .......................................... 80 - 14 1B17 RADIATOR ........................................................................ 20 - 12

3B25 PLATFORM, 200 SERIES CUTTING, CONVERSION 1B17 RADIATOR AND HOSES ................................................ 20 - 12

PARTS .......................................................................... 70 - 19 3F7 RADIATOR DOOR ............................................................ 80 - 6

1H22 PLUGGED AIR FILTER WARNING SWITCH .................. 40 - 60 1B21 RADIATOR SHELL AND SEALS...................................... 20 - 16

1H22 PLUGGED ENGINE AIR FILTER WARNING SWITCH .. 40 - 60 1G18 RADIO, SPEAKERS AND ANTENNA .............................. 40 - 30

1H11 PLUGGING SENSING SWITCH, STRAW WALKER ...... 40 - 48 4K3 RAIL, STRAW CHOPPER HOUSING, KNIFEBANK ...... 121 -82

4F13 PRE-CLEANING CHAFFER.............................................. 120 -50 4E4 RASP BAR CONCAVE AND GRATE .............................. 120 -14

4F15 PRECLEANER CHAFFER FRAME .................................. 120 -52 4E6 RASP BAR CONCAVE AND GRATE .............................. 120 -16

4F19 PRECLEANER CHAFFER FRAME ARMS ...................... 120 -56 4G15 RASP BAR CYLINDER, SEPARATOR CURTAIN .......... 120 -76

3B9 PRESSURE GAUGE, ACCUMULATOR .......................... 70 - 2 4E1 RASP BAR THRESHING CYLINDER .............................. 120 -10

3E20 PRESSURE HOSE, CHARGE.......................................... 70 - 94 3H8 REAR AND SIDE CAB SEALS ........................................ 90 - 6

3D4 PRESSURE LINES AND HOSES .................................... 70 - 50 2G21 REAR AXLE SPINDLE HOUSING .................................. 60 - 40

3E15 PRESSURE REGULATOR, ENGINE GEARCASE.......... 70 - 88 2G19 REAR AXLE SPINDLES .................................................. 60 - 38

3E13 PRESSURE SWITCH, ENGINE GEARCASE OIL 2G16 REAR AXLE SUPPORT.................................................... 60 - 34

FILTER ASSEMBLY .................................................... 70 - 86 2G14 REAR AXLE TRASH SHIELD .......................................... 60 - 32

3J22 PRESSURIZING FAN AND AIR CONDITIONING/ 2G18 REAR AXLE, ADJUSTABLE ............................................ 60 - 37

HEATER FAN .............................................................. 90 - 72 2G17 REAR AXLE, FIXED ........................................................ 60 - 36

4H7 PRIMARY COUNTERSHAFT GEARCASE ...................... 121 -14 3G7 REAR CORNER SHEET (L.H.) ........................................ 80 - 32

4H9 PRIMARY COUNTERSHAFT GEARCASE ...................... 121 -16 3F19 REAR HOOD .................................................................... 80 - 18

4H5 PRIMARY COUNTERSHAFT, GEARCASE AND 3F15 REAR LADDER ................................................................ 80 - 14

DRIVE SHAFT .............................................................. 121 -12 3F7 REAR LADDER LANDING HANDRAILS.......................... 80 - 6

4H13 PRIMARY COUNTERSHAFT, SUPPORTS AND VARI- 3F17 REAR LADDER LANDING LATCH ARM ........................ 80 - 16

ABLE SHEAVE ............................................................ 121 -20 1J20 REAR LAMP ASSEMBLY - L.H. SIDE ............................ 40 - 109

1E18 PULLEY, AIR CONDITIONER COMPRESSOR FAN ...... 24 - 59 1J19 REAR LAMP ASSEMBLY - R.H. SIDE............................ 40 - 108

1E13 PULLEY, CRANKSHAFT AND DAMPERS ...................... 24 - 54 5D8 REAR LEFT SIDE TAILINGS SHIELD ............................ 125 -50

1E8 PULLEY, FAN, HUB.......................................................... 24 - 49 1H7 REAR LIGHT HARNESS AND SHIELDS ........................ 40 - 44

4I7 PULLEY, SECONDARY COUNTERSHAFT DRIVE ........ 121 -38 1C22 REAR OIL SEAL .............................................................. 24 - 14

4H1 PUMP DRIVE AND SEPARATOR, GEARCASE ............ 121 -8 1C22 REAR OIL SEAL GASKET .............................................. 24 - 14

4H3 PUMP DRIVE AND SEPARATOR, GEARCASE ............ 121 -10 1C22 REAR OIL SEAL HOUSING ............................................ 24 - 14

4G24 PUMP DRIVE SHAFT AND SEPARATOR DRIVE 2G11 REAR STEERING LINES AND HOSES

WET-CLUTCH, GEARCASE ........................................ 121 -6 (DUAL CYLINDER) ...................................................... 60 - 28

4J5 PUMP MOUNTING SHEAVE, REEL / BELT PICKUP 4J11 REAR STRAW CHOPPER DRIVES ................................ 121 -66

DRIVE .......................................................................... 121 -60 4J13 REAR STRAW CHOPPER DRIVES, FINE CUT ............ 121 -68

5C13 PUMP, CHAFF SPREADER ............................................ 125 -28 1B25 REAR SUPPORT .............................................................. 20 - 20

3B17 PUMP, FEEDER HOUSE OIL COOLER.......................... 70 - 10 5D8 REAR TAILINGS SHIELD, LEFT SIDE ............................ 125 -50

1F1 PUMP, FUEL .................................................................... 30 - 4 3I1 REAR VIEW MIRROR, LEFT-HAND................................ 90 - 24

1E3 PUMP, FUEL INJECTION ................................................ 24 - 44 5H4 REAR WHEEL DECALS .................................................. 170 -20

1E6 PUMP, FUEL TRANSFER (ROBERT BOSCH) .............. 24 - 47 2H5 REAR WHEELS (4-WHEEL DRIVE/CAM LODE

2D6 PUMP, HYDROSTATIC DRIVE CHARGE MOTOR) ........................................................................ 60 - 48

(PLANETARY) .............................................................. 50 - 50 2H3 REAR WHEELS AND WHEEL WEIGHTS ...................... 60 - 46

2D7 PUMP, HYDROSTATIC DRIVE CHARGE 5G14 REEL BELTS .................................................................... 170 -4

(PLANETARY) .............................................................. 50 - 51 3B13 REEL DRIVE FLOW CONTROL VALVE ........................ 70 - 6

2C17 PUMP, HYDROSTATIC DRIVE CHARGE 5C5 REEL DRIVE FLOW CONTROL VALVE ........................ 125 -20

(RING AND PINION).................................................... 50 - 36 3B11 REEL DRIVE HYD. LINES AND HOSES,

2C18 PUMP, HYDROSTATIC DRIVE CHARGE L.H. SIDE ...................................................................... 70 - 4

(RING AND PINION).................................................... 50 - 37 3C1 REEL DRIVE HYD. LINES AND HOSES, FRONT.......... 70 - 20

3B17 PUMP, LUBE OIL, FEEDER HOUSE OIL COOLER ...... 70 - 10 3C7 REEL FORE-AND-AFT LINES AND HOSES, FRONT .... 70 - 26

3D21 PUMP, MAIN HYDRAULIC .............................................. 70 - 70 3C9 REEL FORE-AND-AFT LINES, L.H. SIDE ...................... 70 - 28

1D7 PUMP, OIL ENGINE ........................................................ 24 - 24 3D13 REEL FORE/AFT SOLENOID CONTROL VALVE .......... 70 - 60

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-23

PN=23

1A25

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3C5 REEL LIFT LINES AND HOSES ...................................... 70 - 24 5G24 SAFETY DECALS AND LOCATIONS .............................. 170 -14

2B10 REEL LIFT/LOWER OR FEEDERHOUSE SPEED 3J9 SAFETY START SWITCH ................................................ 90 - 58

CONTROL SWITCH .................................................... 50 - 2 4B22 SAFETY STOP, CONTOUR MASTER FEEDER HOUSE 110 -16

3D11 REEL LIFT, SOLENOID CONTROL VALVE .................... 70 - 58 4B20 SAFETY STOP, DRIVE SHIELDS, FEEDER HOUSE .... 110 -14

3C3 REEL PUMP LINES AND HOSES .................................. 70 - 22 5F24 SAMPLING TROUGH, GRAIN TANK .............................. 130 -62

1J7 REEL SPEED MOTOR AND BRACKET.......................... 40 - 96 4D1 SCOOP, DUST FAN ........................................................ 110 -46

4J6 REEL/BELT PICKUP CHARGE PUMP MOUNTING 4C24 SCOOP, RETURN FLOOR, FEEDER HOUSE................ 110 -44

AND SHEAVE .............................................................. 121 -61 1B9 SCREEN DOOR, ROTARY .............................................. 20 - 4

3D23 REEL, BELT PICKUP DRIVE PUMP .............................. 70 - 72 1B7 SCREEN DRIVE, ROTARY .............................................. 20 - 2

3E15 REGULATOR, ENGINE GEARCASE PRESSURE.......... 70 - 88 4F5 SCREENS, CLEANING FAN LEAF (CORN) .................. 120 -42

4B24 REINFORCEMENT, FEEDER HOUSE FRAME .............. 110 -18 2F9 SEAL AND BRAKE PEDAL, PARKING .......................... 60 - 2

3F19 REINFORCEMENT, REAR HOOD .................................. 80 - 18 3D23 SEAL KIT, REEL BELT PICKUP DRIVE PUMP.............. 70 - 72

5B16 REINFORCEMENT, STRAW SPREADER MOUNTING .. 125 -6 3D8 SEAL KIT, SOLENOID CONTOL RELIEF VALVE .......... 70 - 54

1I10 RELAYS, ENGINE CIRCUIT BREAKER .......................... 40 - 74 2F21 SEAL KIT, STEERING PUMP .......................................... 60 - 14

3D8 RELIEF VALVE MODULE, SOLENOID CONTROL ........ 70 - 54 3E7 SEAL KIT, TILT CYLINDER, CONTOUR MASTER ........ 70 - 80

4I3 RELIEF VALVE, DUAL RANGE CYLINDER.................... 121 -34 3K3 SEAL, A/C COMPRESSOR .............................................. 90 - 78

3D1 RESERVOIR UPPER RETURN LINES, HOSES ............ 70 - 46 3H14 SEAL, CAB DOOR ............................................................ 90 - 12

2F13 RESERVOIR, BRAKE LINES, MASTER CYLINDER ...... 60 - 6 4D24 SEAL, CYLINDER SHEAR BAR ...................................... 120 -8

3D3 RESERVOIR, HYDRAULIC/HYDROSTATIC .................... 70 - 48 1C24 SEAL, FRONT OIL ............................................................ 24 - 16

2F5 RESEVOIR, RETURN LINE.............................................. 50 - 100 1C22 SEAL, REAR OIL .............................................................. 24 - 14

3E1 RETRACT LINES, HOSES, UNLOADING AUGER ........ 70 - 74 4G9 SEAL, STRAW WALKERS .............................................. 120 -70

3I19 RETROFIT SEAT BELT KIT 1D17 SEAL, TUBE ...................................................................... 24 - 34

(MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 42 5D3 SEAL, UPPER TAILINGS AUGER HOUSING ................ 125 -44

4C24 RETURN FLOOR, FEEDER HOUSE .............................. 110 -44 1D17 SEAL, WATER PUMP OIL .............................................. 24 - 34

2F5 RETURN LINE TO RESEVOIR ........................................ 50 - 100 5B24 SEALS AND PAN, CHAFF SPREADER .......................... 125 -14

3C24 RETURN LINES, HYDRAULIC ........................................ 70 - 44 1B21 SEALS AND RADIATOR SHELL...................................... 20 - 16

3D1 RETURN LINES, UPPER, RESERVOIR .......................... 70 - 46 3H8 SEALS, CAB SIDE AND REAR ...................................... 90 - 6

3I11 REVERSER FOOT CONTROL, FEEDER HOUSE.......... 90 - 34 4F5 SEALS, CLEANING FAN LEAF SCREEN (CORN) ........ 120 -42

4B13 REVERSER FOOT CONTROL, FEEDER HOUSE.......... 110 -6 4C1 SEALS, FEEDER HOUSE - CONTOUR MASTER.......... 110 -20

4B11 REVERSER GEAR BOX .................................................. 110 -4 3H6 SEALS, FOAM AND SOUND DEADENING, CAB .......... 90 - 4

4D7 REVERSER) ...................................................................... 110 -52 3F3 SEALS, SEPARATOR FRAME ........................................ 80 - 2

3G19 RIGHT SIDE FRONT SHIELD ASSEMBLY .................... 80 - 44 2D13 SEALS, SHAFT, OUTER COVER AND BEARING

3G15 RIGHT SIDE SHIELD ASSEMBLY .................................. 80 - 40 CAM LOBE MOTOR .................................................... 50 - 58

2B14 RIMS, DRIVE WHEELS .................................................... 50 - 6 3I20 SEAT ADJUST FORE-AND-AFT ...................................... 90 - 44

2B22 RING AND PINION FINAL DR., TRANSMISSION .......... 50 - 14 3I15 SEAT AND BACKREST, OPERATOR’S .......................... 90 - 38

1D17 RING, WATER PUMP RETAINING .................................. 24 - 34 3I19 SEAT BELT KIT, RETROFIT

1C18 RINGS, PISTON ................................................................ 24 - 10 (MACHINES PRIOR TO 1996 MODEL YEAR) .......... 90 - 42

4G9 RISER, STRAW WALKERS.............................................. 120 -70 3I22 SEAT HEIGHT ADJUSTER .............................................. 90 - 46

1D4 ROCKER ARM COVER .................................................... 24 - 21 3I13 SEAT SHROUDS AND PASSENGER SEAT .................. 90 - 36

1D4 ROCKER ARM COVER GASKET .................................... 24 - 21 3I24 SEAT, AIR SUSPENSION ................................................ 90 - 48

1D3 ROCKER ARM SHAFT .................................................... 24 - 20 3J1 SEAT, AIR SUSPENSION KITS ...................................... 90 - 50

1D3 ROCKER ARMS ................................................................ 24 - 20 3J3 SEAT, AIR SUSPENSION KITS ...................................... 90 - 52

3I9 ROD, GEARSHIFT LEVER .............................................. 90 - 32 3J5 SEAT, AIR SUSPENSION KITS ...................................... 90 - 54

1C18 RODS, CONNECTING ...................................................... 24 - 10 3J7 SEAT, AIR SUSPENSION KITS ...................................... 90 - 56

1D3 RODS, PUSH .................................................................... 24 - 20 1G9 SEAT, AIR, WIRING HARNESS ...................................... 40 - 20

3H18 ROOF, CAB AND SUPPORTS ........................................ 90 - 16 3I17 SEAT, OPERATOR’S SEATBELT .................................... 90 - 40

1F22 ROOF, CAB LIGHTS ........................................................ 40 - 8 3I18 SEAT, SEATBELT - TRAINING........................................ 90 - 41

5G13 ROTARY SCREEN BELTS .............................................. 170 -3 3I17 SEATBELT, OPERATOR’S SEAT .................................... 90 - 40

1B9 ROTARY SCREEN DOOR AND SCREEN ...................... 20 - 4 3I18 SEATBELT, TRAINING SEAT .......................................... 90 - 41

1B7 ROTARY SCREEN DRIVE .............................................. 20 - 2 4I7 SECONDARY COUNTERSHAFT DRIVE PULLEY.......... 121 -38

1B7 ROTARY SCREEN DRIVE AND IDLER ARMS .............. 20 - 2 1F1 SENDER, FUEL ................................................................ 30 - 4

1B7 ROTARY SCREEN DRIVE IDLER ARMS ...................... 20 - 2 1H11 SENSING SWITCH, STRAW WALKER PLUGGING ...... 40 - 48

4J23 ROTOR STRAW CHOPPER, FINE CUT (PADDLED 1E17 SENSOR, ENGINE SPEED.............................................. 24 - 58

WIDE ............................................................................ 121 -78 1H9 SENSOR, LOW SHAFT CYLINDER SPEED .................. 40 - 46

4J21 ROTOR STRAW CHOPPER, FINE CUT (STRAIGHT 1J11 SENSOR, SPEED, FDR HSE BACKSHAFT.................... 40 - 100

WIDE ............................................................................ 121 -76 4E18 SENSOR, SPIKE TOOTH INDICATOR............................ 120 -28

4K1 ROTOR, SHEAVE AND STRAW CHOPPER .................. 121 -80 1E3 SENSOR, TEMPERATURE (FIP) .................................... 24 - 44

4J19 ROTOR, TRI,STRAW CHOPPER .................................... 121 -74 1H13 SENSOR, UNLOADING AUGER ...................................... 40 - 50

1H15 SENSORS AND BRACKETS, LOW SHAFT SPEED ...... 40 - 52

4H1 SEPARATOR AND PUMP DRIVE, GEARCASE ............ 121 -8

S 4H3 SEPARATOR AND PUMP DRIVE, GEARCASE ............ 121

3F3 SEPARATOR CROSS BRACES ...................................... 80 - 2

3G9 SAFETY CHAIN, L.H. FRONT CORNER SHEET .......... 80 - 34 4G15 SEPARATOR CURTAIN

5G16 SAFETY DECALS AND LOCATIONS .............................. 170 -6 (RASP BAR CYLINDER) .............................................. 120 -76

5G18 SAFETY DECALS AND LOCATIONS .............................. 170 -8 4G16 SEPARATOR CURTAIN

5G20 SAFETY DECALS AND LOCATIONS .............................. 170 -10 (SPIKE-TOOTH CYLINDER) ........................................ 120 -77

5G22 SAFETY DECALS AND LOCATIONS .............................. 170 -12

10-24 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

-10

PN=24

1B1

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4G22 SEPARATOR DRIVE GEAR, UNLOADING DRIVE 1B7 SHEAVE, ROTARY SCREEN DRIVE .............................. 20 - 2

AND STRAW CHOPPER, ENGINE GEARCASE........ 121 -4 4K1 SHEAVE, ROTOR AND STRAW CHOPPER .................. 121 -80

4G20 SEPARATOR DRIVE GEAR,UNLOADING DRIVE AND 4I7 SHEAVE, SECONDARY COUNTERSHAFT DRIVE ........ 121 -38

STRAW CHOPPER- ENGINE GEARCASE ................ 121 -2 4I21 SHEAVE, SEPARATOR FAN DRIVE .............................. 121 -52

4G24 SEPARATOR DRIVE WET-CLUTCH AND PUMP 4H17 SHEAVE, SLOW SPEED CYLINDER DRIVE .................. 121 -24

DRIVE SHAFT, GEARCASE ........................................ 121 -6 4J11 SHEAVE, STRAW CHOPPER DRIVES (REAR) ............ 121 -66

4I21 SEPARATOR FAN DRIVE ................................................ 121 -52 5B18 SHEAVE, STRAW SPREADER........................................ 125 -8

1I4 SEPARATOR FAN DRIVE ADJUSTING MOTOR .......... 40 - 67 4I17 SHEAVE, STRAW WALKER DRIVE ................................ 121 -48

3F3 SEPARATOR FRAME ...................................................... 80 - 2 4I9 SHEAVE, STRAW WALKER DRIVE GEARCASE .......... 121 -40

4D18 SEPARATOR/FEEDER HOUSE SEAL, STONE 5F21 SHEAVE, UNLOADING AUGER COUNTERSHAFT

TRAP AND DOOR........................................................ 120 -2 DRIVE .......................................................................... 130 -58

1F1 SEPARATOR, WATER .................................................... 30 - 4 5E1 SHEAVE, UPPER CLEAN GRAIN ELEVATOR .............. 130 -10

3G1 SERVICE ACCESS SHIELD (R.H.).................................. 80 - 26 4I19 SHEAVES, BEATER DRIVE AND TIGHTENER.............. 121 -50

3G3 SERVICE ACCESS SHIELD, L.H..................................... 80 - 28 4C22 SHEAVES, FEEDER HOUSE, UPPER

1I20 SERVICE KIT, ELECTRICAL CONNECTORS ................ 40 - 84 COUNTERSHAFT, VARIABLE DRIVE ........................ 110 -42

1I22 SERVICE KIT, ELECTRICAL CONNECTORS ................ 40 - 86 4H13 SHEAVES, PRIMARY COUNTERSHAFT ........................ 121 -20

1J2 SERVICE OUTLET, ELECTRICAL .................................. 40 - 91 4C1 SHELL, FEEDER HOUSE-CONTOUR MASTER ............ 110 -20

2D3 SERVO, HYDROSTATIC PUMP ...................................... 50 - 46 1B21 SHELL, RADIATOR AND SEALS .................................... 20 - 16

2C15 SERVO, HYDROSTATIC PUMP 3G13 SHIELD ASSEMBLY, FRONT, LEFT SIDE .................... 80 - 38

(RING AND PINION).................................................... 50 - 34 3G19 SHIELD ASSEMBLY, FRONT, RIGHT SIDE .................. 80 - 44

4E22 SHAFT, BEATER AND DRIVE BELT .............................. 120 -32 3G17 SHIELD ASSEMBLY, LEFT SIDE .................................... 80 - 42

4H15 SHAFT, CYLINDER DRIVE .............................................. 121 -22 3G15 SHIELD ASSEMBLY, RIGHT SIDE.................................. 80 - 40

4D7 SHAFT, DRIVE, FRONT, SHEAVE AND 3F25 SHIELD, DRIVE, R.H. REAR............................................ 80 - 24

MOUNTINGS (FIXED SPEED WITH REVERSER) .... 110 -52 1D1 SHIELD, EXHAUST VALVE.............................................. 24 - 18

4D5 SHAFT, DRIVE, UPPER, SHEAVE AND MOUNTING 3F23 SHIELD, FAN DRIVE (L.H.).............................................. 80 - 22

(FIXED SPEED WITH REVERSER) ............................ 110 -50 4B20 SHIELD, FEEDER HOUSE DRIVE .................................. 110 -14

2E3 SHAFT, FINAL DRIVE PINION ........................................ 50 - 74 1D23 SHIELD, HEAT, EXHAUST MANIFOLD .......................... 24 - 40

2E5 SHAFT, FINAL DRIVE PINION ........................................ 50 - 76 4D13 SHIELD, INTAKE .............................................................. 110 -58

4D7 SHAFT, FRONT DRIVE, FIXED SPEED ........................ 110 -52 5D8 SHIELD, REAR TAILINGS LEFT SIDE ............................ 125 -50

4B9 SHAFT, FRONT VARIABLE DRIVE SHEAVE ................ 110 -2 3G3 SHIELD, SERVICE ACCESS (L.H.) ................................ 80 - 28

4B15 SHAFT, FRONT WITH REVERSER (VARIABLE) .......... 110 -8 3G1 SHIELD, SERVICE ACCESS (R.H.) ................................ 80 - 26

2D1 SHAFT, HYDROSTATIC PUMP 5C21 SHIELD, TAILINGS ELEVATOR ...................................... 125 -36

(PLANETARY) .............................................................. 50 - 44 5D10 SHIELD, TAILINGS UPPER REAR .................................. 125 -52

2C12 SHAFT, HYDROSTATIC PUMP 2G14 SHIELD, TRASH, REAR AXLE ........................................ 60 - 32

(RING AND PINION).................................................... 50 - 30 5D6 SHIELD, UPPER TAILINGS AUGER DRIVE .................. 125 -48

5C17 SHAFT, LOWER TAILINGS AUGER................................ 125 -32 5B22 SHIELDS AND HANDLES, CHAFF SPREADER

2D13 SHAFT, OUTER COVER, BEARING AND SEALS (DUAL MOTOR)............................................................ 125 -12

CAM LOBE MOTOR .................................................... 50 - 58 1H7 SHIELDS FOR REAR LIGHT HARNESS ........................ 40 - 44

4E1 SHAFT, RASP BAR .......................................................... 120 -10 3F21 SHIELDS, AUGER DRIVE (R.H.) .................................... 80 - 20

1D3 SHAFT, ROCKER ARM .................................................... 24 - 20 4F11 SHIELDS, CLEANING FAN INTAKE ................................ 120 -48

4E8 SHAFT, SPIKE TOOTH CONCAVE ................................ 120 -18 4B22 SHIELDS, CONTOUR MASTER FEEDER HOUSE ........ 110 -16

4E10 SHAFT, SPIKE TOOTH THRESHING CYLINDER .......... 120 -20 2E23 SHIELDS, FINAL DRIVE SHAFT - PLANETARY

2G3 SHAFT, STEERING COLUMN (LOWER) ........................ 60 - 20 FINAL DRIVE ................................................................ 50 - 94

4G13 SHAFT, STRAW WALKER CRANK ................................ 120 -74 2E22 SHIELDS, FINAL DRIVE SHAFT - SINGLE

4I17 SHAFT, STRAW WALKER DRIVE .................................. 121 -48 REDUCTION ................................................................ 50 - 93

2C3 SHAFT, TRANSMISSION PINION.................................... 50 - 20 2E24 SHIELDS, MUD ................................................................ 50 - 95

5E1 SHAFT, UPPER CLEAN GRAIN ELEVATOR.................. 130 -10 3F23 SHIELDS, MUD (L.H.) ...................................................... 80 - 22

4C8 SHAFT, UPPER FEEDER HOUSE .................................. 110 -28 3G11 SHIELDS, MUD (R.H.) ...................................................... 80 - 36

2C5 SHAFTS, DIFFERENTIAL ................................................ 50 - 22 4J15 SHIELDS, STRAW CHOPPER DRIVE ............................ 121 -70

2B19 SHAFTS, DRIVE .............................................................. 50 - 11 5E14 SHIELDS, UPPER CLEAN GRAIN ELEVATOR .............. 130 -24

2B20 SHAFTS, DRIVE .............................................................. 50 - 12 4B11 SHIFT COLLAR, REVERSER GEARBOX ...................... 110 -4

2C10 SHAFTS, FINAL DRIVE 2B23 SHIFTER CAM, TRANSMISSION AND

(RING AND PINION).................................................... 50 - 28 DIFFERENTIAL ............................................................ 50 - 15

4G7 SHAKER PAN .................................................................. 120 -68 2B21 SHIFTER FORKS, TRANSMISSION AND

4D24 SHEAR BAR, CYLINDER ................................................ 120 -8 DIFFERENTIAL HOUSING .......................................... 50 - 13

4J1 SHEAVE LINKAGE, FAN DRIVE SPEED CONTROL .... 121 -56 1C18 SHIM, LINER .................................................................... 24 - 10

4E22 SHEAVE, BEATER............................................................ 120 -32 1J15 SHOE ADJUSTING LIGHT SWITCH .............................. 40 - 104

5E10 SHEAVE, CLEAN GRAIN ELEVATOR GEARCASE ...... 130 -20 4E25 SHOE GRAIN SUPPLY AUGER CLEANOUT DOOR,

4I3 SHEAVE, DUAL RANGE CYLINDER DRIVE .................. 121 -34 HANDLE AND LATCHES ............................................ 120 -36

4H19 SHEAVE, DUAL-RANGE CYLINDER DRIVE .................. 121 -26 4F1 SHOE GRAIN SUPPLY AUGERS AND HOUSING ........ 120 -38

1B11 SHEAVE, ENGINE FAN AND DRIVES............................ 20 - 6 4F3 SHOE GRAIN SUPPLY AUGERS AND HOUSING ........ 120 -40

1B15 SHEAVE, ENGINE FAN DRIVES (HI POWER) .............. 20 - 10 1J17 SHOE, CLEANING, LAMP INSTALLATION .................... 40 - 106

4J13 SHEAVE, FINE CUT STRAW CHOPPER (REAR) .......... 121 -68 2F17 SHOES, BRAKE ................................................................ 60 - 10

4J5 SHEAVE, MOUNTING, PUMP, REEL / BELT 1C14 SHORT BLOCK ................................................................ 24 - 6

PICKUP DRIVE ............................................................ 121 -60 1E11 SHORT BLOCK GASKET KIT.......................................... 24 - 52

4B9 SHEAVE, MOUNTINGS, FRONT VARIABLE 3I13 SHROUDS, SEAT ............................................................ 90 - 36

DRIVE .......................................................................... 110 -2 3E15 SHUT OFF VALVE, REGULATOR, PRESSURE ............ 70 - 88

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-25

PN=25

1B2

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1E3 SHUT-OFF HOUSING SOLENOID (FIP) ........................ 24 - 44 1E15 STARTER WIRING HARNES .......................................... 24 - 56

3H8 SIDE AND REAR CAB SEALS ........................................ 90 - 6 1F6 STARTING AID, COLD WEATHER.................................. 30 - 9

1I3 SIDE FINDER LIGHTS .................................................... 40 - 66 1D24 STARTING FITTINGS, ETHER ........................................ 24 - 41

4I15 SIEVE AND CHAFFER DRIVE, CONVEYOR AUGERS 2G1 STARTING SWITCH ........................................................ 60 - 18

AND STRAW WALKER ................................................ 121 -46 3J16 STARTING SWITCH ........................................................ 90 - 66

4G3 SIEVE ELEMENT .............................................................. 120 -64 2D23 STEERING ARM, CAM LOBE MOTOR

4G5 SIEVE FRAME .................................................................. 120 -66 (STEERABLE MOTOR) ................................................ 50 - 68

4I17 SIEVE, CHAFFER DRIVE, STRAW WALKER AND 2G3 STEERING COLUMN (LOWER) ...................................... 60 - 20

CONVEYOR AUGERS ................................................ 121 -48 3J18 STEERING COLUMN (LOWER) ...................................... 90 - 68

4H15 SINGLE RANGE CYLINDER DRIVE................................ 121 -22 2G1 STEERING COLUMN (UPPER) ...................................... 60 - 18

3D19 SIX STACK SOLENOID CONTROL VALVE MODULE 3J16 STEERING COLUMN (UPPER) ...................................... 90 - 66

ASSEMBLY & MOUNTINGS ........................................ 70 - 68 1G7 STEERING COLUMN WIRING HARNESS ...................... 40 - 18

2F19 SLAVE CYLINDER, BRAKE ............................................ 60 - 12 2G13 STEERING CYLINDER .................................................... 60 - 30

4C20 SLIP CLUTCH,FEEDER HOUSE .................................... 110 -40 2G5 STEERING HOSES AND LINES, FRONT ...................... 60 - 22

4H17 SLOW SPEED CYLINDER DRIVE .................................. 121 -24 2G7 STEERING HOSES AND LINES, L.H. SIDE .................. 60 - 24

5B16 SMV (SLOW MOVING VEHICLE) .................................... 125 -6 2F23 STEERING HOSES, UPPER ............................................ 60 - 16

3D8 SOLENOID CONTROL RELIEF VALVE MODULE.......... 70 - 54 2G11 STEERING LINES AND HOSES, REAR

3D18 SOLENOID CONTROL VALVE BRACKETS.................... 70 - 66 (DUAL CYLINDER) ...................................................... 60 - 28

3D19 SOLENOID CONTROL VALVE MODULE, SIX STACK 2G9 STEERING LINES, R.H. SIDE ........................................ 60 - 26

ASSEMBLY & MOUNTINGS ........................................ 70 - 68 2F21 STEERING PUMP ............................................................ 60 - 14

3D13 SOLENOID CONTROL VALVE, AUGER SWING............ 70 - 60 3J18 STEERING PUMP - STEERING SHAFT ........................ 90 - 68

3D11 SOLENOID CONTROL VALVE, CYLINDER SPEED ...... 70 - 58 2H1 STEERING TIE RODS, ADJUSTABLE REAR AXLE ...... 60 - 44

3E17 SOLENOID CONTROL VALVE, ENGINE GEARCASE 2G22 STEERING TIE RODS, FIXED REAR AXLE .................. 60 - 41

(PRESSURE REGULATOR) ........................................ 70 - 90 2G23 STEERING TIE RODS, FIXED REAR AXLE,

3D16 SOLENOID CONTROL VALVE, FIVE STACK ................ 70 - 64 4-WHEEL DRIVE .......................................................... 60 - 42

3D9 SOLENOID CONTROL VALVE, HEADER LIFT .............. 70 - 56 3J18 STEERING WHEEL ADJUSTER PEDAL ........................ 90 - 68

3D13 SOLENOID CONTROL VALVE, REEL FORE/AFT ........ 70 - 60 3H16 STEP, CAB SUPPORT .................................................... 90 - 14

3D11 SOLENOID CONTROL VALVE, REEL LIFT .................... 70 - 58 4D18 STONE TRAP, DOOR AND FEEDER HOUSE/

3E15 SOLENOID VALVE, REGULATOR, PRESSURE ............ 70 - 88 SEPARATOR SEAL...................................................... 120 -2

2E1 SOLENOID, CONTROL VALVE (FOUR-WHEEL DR.).... 50 - 71 1E19 STRAP, ALTERNATOR ADJUSTING .............................. 24 - 60

1F6 SOLENOID, ETHER START ............................................ 30 - 9 1D5 STRAPS, ENGINE LIFT.................................................... 24 - 22

1E3 SOLENOID, FUEL SHUT-OFF (FIP)................................ 24 - 44 5G14 STRAW CHOPPER BELTS .............................................. 170 -4

1E3 SOLENOID, SHUT-OFF HOUSING (FIP) ........................ 24 - 44 4J17 STRAW CHOPPER DECK, SUPPORTS AND FINS ...... 121 -72

5G7 SOLENOID, VALVE BLOCK 5B10 STRAW CHOPPER DOOR .............................................. 125 -4

DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -3 4J15 STRAW CHOPPER DRIVE SHIELDS .............................. 121 -70

3H6 SOUND DEADENING, SEALS AND FOAM, CAB .......... 90 - 4 4K5 STRAW CHOPPER DRIVE SPROCKETS ...................... 121 -84

2B19 SPACERS, AXLE (RING AND PINION FINAL 4J7 STRAW CHOPPER DRIVES (FRONT) .......................... 121 -62

DRIVE).......................................................................... 50 - 11 4J11 STRAW CHOPPER DRIVES (REAR) .............................. 121 -66

2B20 SPACERS, AXLE, PLANETARY FINAL DRIVE .............. 50 - 12 4K3 STRAW CHOPPER HOUSING AND KNIFEBANK.......... 121 -82

1G18 SPEAKERS, ANTENNA AND RADIO .............................. 40 - 30 4J23 STRAW CHOPPER ROTOR, FINE CUT (PADDLED

4I23 SPEED CONTROL LINKAGE, FAN DRIVE .................... 121 -54 WIDE ............................................................................ 121 -78

4J1 SPEED CONTROL, FAN DRIVE SHEAVE LINKAGE .... 121 -56 4J21 STRAW CHOPPER ROTOR, FINE CUT (STRAIGHT

1G24 SPEED SENSOR, TRANSMISSION ................................ 40 - 36 WIDE ............................................................................ 121 -76

1H1 SPEED SENSOR, TRANSMISSION ................................ 40 - 38 1H7 STRAW CHOPPER SENSOR BRACKET ........................ 40 - 44

1J7 SPEED, REEL, MOTOR AND BRACKET........................ 40 - 96 4K1 STRAW CHOPPER, ROTOR AND SHEAVE .................. 121 -80

4E14 SPIKE TOOTH CONCAVE .............................................. 120 -24 4J19 STRAW CHOPPER, TRI ROTOR .................................... 121 -74

4E18 SPIKE TOOTH INDICATOR ............................................ 120 -28 4G20 STRAW CHOPPER, UNLOADING DRIVE AND

4E10 SPIKE TOOTH THRESHING CYLINDER ........................ 120 -20 SEPARATOR DRIVE GEAR- ENGINE GEARCASE .. 121 -2

4E8 SPIKE-TOOTH CONCAVE .............................................. 120 -18 4G22 STRAW CHOPPER, UNLOADING DRIVE AND

4E12 SPIKE-TOOTH CONCAVE .............................................. 120 -22 SEPARATOR DRIVE GEAR, ENGINE GEARCASE .. 121 -4

4G16 SPIKE-TOOTH CYLINDER, SEPARATOR CURTAIN .... 120 -77 5B18 STRAW SPREADER ........................................................ 125 -8

4E16 SPIKE-TOOTH FINGER GRATE...................................... 120 -26 5B16 STRAW SPREADER MOUNTING AND GUARD ............ 125 -6

2G21 SPINDLE HOUSING, REAR AXLE .................................. 60 - 40 1H11 STRAW WALKER (PLUGGING) SENSING SWITCH .... 40 - 48

2G19 SPINDLES, REAR AXLE .................................................. 60 - 38 4G11 STRAW WALKER BEARING KIT .................................... 120 -72

5C15 SPREADER CURTAIN ...................................................... 125 -30 4G13 STRAW WALKER CRANKS,STRAW SPREADER DRIVE

3B15 SPREADER MOTOR, CHAFF (EATON).......................... 70 - 8 AND SHIELD ................................................................ 120 -74

5C11 SPREADER, CHAFF, MOTOR, LINES AND HOSES .... 125 -26 4I9 STRAW WALKER DRIVE GEARCASE............................ 121 -40

5B18 SPREADER, STRAW........................................................ 125 -8 4I13 STRAW WALKER DRIVE GEARCASE............................ 121 -44

5G14 SPREADER, STRAW, BELTS .......................................... 170 -4 4I15 STRAW WALKER, CONVEYOR AUGERS, SIEVE AND

4D20 SPRING, CYLINDER DOOR ............................................ 120 -4 CHAFFER DRIVE ........................................................ 121 -46

5E1 SPROCKET, UPPER CLEAN GRAIN ELEVATOR.......... 130 -10 4I17 STRAW WALKER, CONVEYOR AUGERS, SIEVE AND

4K5 SPROCKETS, DRIVE, STRAW CHOPPER .................... 121 -84 CHAFFER DRIVE ........................................................ 121 -48

5C23 SPROCKETS, TAILINGS ELEVATOR CONVEYOR ...... 125 -38 4G9 STRAW WALKERS .......................................................... 120 -70

1E15 STARTER .......................................................................... 24 - 56 5F23 STRAWCHOPPER TOP BELT GUIDE (TRAP) .............. 130 -60

1C23 STARTER GEAR .............................................................. 24 - 15 4D24 STRIPPER, CYLINDER SHEAR BAR .............................. 120 -8

1H20 STARTER MOTOR .......................................................... 40 - 58 4D1 STRIPPER, DUST FAN .................................................... 110 -46

1E15 STARTER SWITCH .......................................................... 24 - 56 4C24 STRIPPER, FEEDER HOSUE RETURN FLOOR............ 110 -44

10-26 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

PN=26

1B3

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

3H10 SUNVISOR, CAB .............................................................. 90 - 8 5D8 TAILINGS SHIELD, REAR LEFT SIDE ............................ 125 -50

1J1 SUPPLEMENTARY TERMINALS AND CONNECTORS 40 - 90 5D10 TAILINGS SHIELD, UPPER REAR .................................. 125 -52

4E25 SUPPLY AUGER CLEANOUT DOOR, HANDLE AND 1F3 TANK FUEL LINES AND FITTINGS ................................ 30 - 6

LATCHES, SHOE GRAIN ............................................ 120 -36 1B19 TANK, COOLANT RECOVERY ........................................ 20 - 14

5F5 SUPPORT AND BRACES, AUGER ................................ 130 -40 1E23 TANK, FUEL...................................................................... 30 - 2

2F20 SUPPORT BRACKET, BRAKE CABLE .......................... 60 - 13 5F24 TANK, GRAIN, SAMPLING TROUGH.............................. 130 -62

4I11 SUPPORT, CONCAVE INDICATOR .............................. 121 -42 5E16 TANK,TOP, GRAIN .......................................................... 130 -26

1E18 SUPPORT, AIR CONDITIONER COMPRESSOR .......... 24 - 59 1F20 TEMPERATURE GAUGE ................................................ 40 - 6

1E19 SUPPORT, ALTERNATOR .............................................. 24 - 60 3I7 TEMPERATURE GAUGE ................................................ 90 - 30

3H16 SUPPORT, CAB FRAME .................................................. 90 - 14 1H20 TEMPERATURE SENDING UNIT, ENGINE .................... 40 - 58

5F16 SUPPORT, CROSS AUGER BEARINGS ........................ 130 -52 1E3 TEMPERATURE SENSOR (FIP)...................................... 24 - 44

4I1 SUPPORT, DUAL RANGE SHAFT MOUNTING ............ 121 -32 1H23 TEMPERATURE SWITCH, INLET AIR ............................ 40 - 61

1I12 SUPPORT, ELECTRONIC CONTROL UNIT 1E19 TENSIONER, BELT (ALT.) .............................................. 24 - 60

MOUNTING ( -XXXXXX) ...................................... 40 - 76 1I24 TERMINAL AND WIRING KIT .......................................... 40 - 88

3F13 SUPPORT, ENGINE ACCESS PLATFORM .................... 80 - 12 1I18 TERMINALS, ELECTRICAL, WEATHERPACK................ 40 - 82

1B13 SUPPORT, ENGINE FAN DRIVES .................................. 20 - 8 1J1 TERMINALS, SUPPLEMENTARY, AND CONNECTORS 40 - 90

4I23 SUPPORT, FAN DRIVE SPEED CONTROL .................. 121 -54 1D19 THERMOSTAT .................................................................. 24 - 36

4B9 SUPPORT, FRONT VARIABLE DRIVE SHEAVE .......... 110 -2 1D19 THERMOSTAT COVER .................................................... 24 - 36

5F7 SUPPORT, HUB, HORIZONTAL UNLOADING AUGER 130 -42 1D19 THERMOSTAT GASKET .................................................. 24 - 36

5C19 SUPPORT, LOWER TAILINGS AUGER TROUGH ........ 125 -34 1D19 THERMOSTAT HOUSING, FRONT ................................ 24 - 36

5C24 SUPPORT, LOWER TROUGH AND TAILINGS 4D17 THRESHING CYLINDER COVER .................................... 120 -1

DRIVE BRACKET ........................................................ 125 -39 4E1 THRESHING CYLINDER, RASP BAR ............................ 120 -10

3I15 SUPPORT, OPERATOR’S SEAT .................................... 90 - 38 4E10 THRESHING CYLINDER, SPIKE TOOTH ...................... 120 -20

1B25 SUPPORT, REAR ............................................................ 20 - 20 1C21 THRUST BEARING .......................................................... 24 - 13

2G16 SUPPORT, REAR AXLE .................................................. 60 - 34 1C21 THRUST WASHER .......................................................... 24 - 13

3I11 SUPPORT, REVERSER FOOT CONTROL .................... 90 - 34 2H1 TIE RODS, STEERING, ADJUSTABLE REAR AXLE .... 60 - 44

4E18 SUPPORT, SPIKE TOOTH INDICATOR ........................ 120 -28 2G22 TIE RODS, STEERING, FIXED REAR AXLE.................. 60 - 41

5B16 SUPPORT, STRAW SPREADER MOUNTING ................ 125 -6 2G23 TIE RODS, STEERING, 4-WHEEL DRIVE FIXED

5D3 SUPPORT, UPPER TAILINGS AUGER HOUSING ........ 125 -44 REAR AXLE .................................................................. 60 - 42

3H18 SUPPORTS AND CAB ROOF.......................................... 90 - 16 4I19 TIGHTENER AND BEATER DRIVE SHEAVES .............. 121 -50

4H13 SUPPORTS AND VARIABLE SHEAVE, PRIMARY 4H23 TIGHTENER, CYLINDER DRIVE, DUAL-RANGE .......... 121 -30

COUNTERSHAFT ........................................................ 121 -20 4B17 TIGHTENER, DRIVE, VARIABLE SPEED ...................... 110 -10

1E23 SUPPORTS, FUEL TANK ................................................ 30 - 2 4J3 TIGHTENER, FEEDER HOUSE DRIVE .......................... 121 -58

4C22 SUPPORTS, UPPER COUNTERSHAFT, FEEDER 4C14 TIGHTENER, GUIDES AND FEEDER CONVEYOR

HOUSE, VARIABLE DRIVE ........................................ 110 -42 DRIVE CHAIN .............................................................. 110 -34

2D3 SWASHPLATE, HYDROSTATIC PUMP .......................... 50 - 46 5C17 TIGHTENER, LOWER TAILINGS AUGER ...................... 125 -32

2C15 SWASHPLATE, HYDROSTATIC PUMP 5C25 TIGHTENER, LOWER TAILINGS AUGER CHAIN .......... 125 -40

(RING AND PINION).................................................... 50 - 34 5D1 TIGHTENER, LOWER TAILINGS AUGER DRIVE .......... 125 -42

1G11 SWITCH, AIR CONDITIONER.......................................... 40 - 22 4C3 TILT BEAM, FEEDER HOUSE, CONTOUR MASTER .... 110 -22

1F18 SWITCH, AUX FIELD LIGHTS, OPTIONAL .................... 40 - 4 3E7 TILT CYLINDER - CONTOUR MASTER ........................ 70 - 80

1G11 SWITCH, HEATER............................................................ 40 - 22 1C24 TIMING GEAR COVER .................................................... 24 - 16

5F7 SWITCH, HORIZONTAL UNLOADING AUGER .............. 130 -42 1C24 TIMING GEAR COVER GASKET .................................... 24 - 16

5F8 SWITCH, HORIZONTAL UNLOADING AUGER .............. 130 -43 3H24 TOOL BOX ........................................................................ 90 - 22

1H23 SWITCH, INLET AIR TEMPERATURE ............................ 40 - 61 5H8 TOP DECALS .................................................................... 170 -24

1J15 SWITCH, LIGHT, SHOE ADJUSTING ............................ 40 - 104 1C10 TORQ-GARD PLUS-50, ENGINE OIL.............................. 24 - 1

1H3 SWITCH, PARK BRAKE .................................................. 40 - 40 3I18 TRAINING SEAT SEATBELT .......................................... 90 - 41

1H11 SWITCH, SENSING, STRAW WALKER PLUGGING ...... 40 - 48 1E6 TRANSFER PUMP, FUEL (ROBERT BOSCH) .............. 24 - 47

1E15 SWITCH, STARTER.......................................................... 24 - 56 5E3 TRANSITION AUGER HOUSING .................................... 130 -12

1H22 SWITCH, WARNING, PLUGGED AIR FILTER ................ 40 - 60 2B22 TRANSMISSION................................................................ 50 - 14

1G3 SWITCHES, ARMREST ROCKER .................................. 40 - 14 2B23 TRANSMISSION AND DIFFERENTIAL

5F5 SWIVEL SUPPORT AND BRACES, AUGER .................. 130 -40 HOUSING COVER AND SHIFTER CAM .................... 50 - 15

5F5 SWIVEL, AUGER SUPPORT .......................................... 130 -40 2B21 TRANSMISSION AND DIFFERENTIAL HOUSING,

5F3 SWIVEL, HORIZONTAL UNLOADING AUGER .............. 130 -38 SHIFTER FORKS ........................................................ 50 - 13

2C1 TRANSMISSION BEARINGS............................................ 50 - 18

2C1 TRANSMISSION GEARS.................................................. 50 - 18

T 2B24 TRANSMISSION GEARSHIFT LEVER

AND LINKAGE .............................................................. 50 - 16

1F20 TACHOMETER .................................................................. 40 - 6 2C1 TRANSMISSION INPUT SHAFT ...................................... 50 - 18

3I7 TACHOMETER.................................................................. 90 - 30 2C1 TRANSMISSION LUBE PUMP ........................................ 50 - 18

1F23 TAIL LIGHTS .................................................................... 40 - 9 2C3 TRANSMISSION PINION GEARS .................................... 50 - 20

5B12 TAILBOARD ARMS - CHOP-TO-BALE............................ 125 -5A 2C3 TRANSMISSION PINION SHAFT .................................... 50 - 20

5C24 TAILINGS DRIVE BRACKET AND LOWER 2C3 TRANSMISSION PINION SHAFT BEARINGS ................ 50 - 20

TROUGH SUPPORT .................................................... 125 -39 1G24 TRANSMISSION SPEED SENSOR ................................ 40 - 36

5C23 TAILINGS ELEVATOR CONVEYOR BEARINGS ............ 125 -38 1H1 TRANSMISSION SPEED SENSOR ................................ 40 - 38

5C23 TAILINGS ELEVATOR CONVEYOR CHAIN .................. 125 -38 1J16 TRANSPORT WARNING LIGHTS .................................... 40 - 105

5C23 TAILINGS ELEVATOR CONVEYOR SPROCKETS ........ 125 -38 4D18 TRAP, STONE .................................................................. 120 -2

5C21 TAILINGS ELEVATOR HOUSING .................................... 125 -36 2G14 TRASH SHIELD, REAR AXLE ........................................ 60 - 32

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-27

PN=27

1B4

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

4J19 TRI ROTOR STRAW CHOPPER .................................... 121 -74 5D5 UPPER TAILINGS DRIVE CHAIN TIGHTENER.............. 125 -46

3H10 TRIM PANELS, CAB INTERIOR ...................................... 90 - 8 2E13 UPPER, HYDROSTATIC DRIVE OIL HOSES ................ 50 - 84

5C24 TROUGH SUPPORT, LOWER AND TAILINGS 3F5 UPRIGHT KIT, NO. 1........................................................ 80 - 4

DRIVE BRACKET ........................................................ 125 -39 3F6 UPRIGHT KIT, NO. 5........................................................ 80 - 5

4I23 TRUNNION, FAN DRIVE SPEED CONTROL ................ 121 -54

1D17 TUBE SEAL ...................................................................... 24 - 34

1D15 TUBE, ENGINE OIL DIPSTICK ........................................ 24 - 32 V

1D19 TUBE, THERMOSTAT HOUSING .................................... 24 - 36

1D6 TUBES, OIL COOLER ...................................................... 24 - 23 2C24 VALVE BLOCK .................................................................. 50 - 43

1D10 TUBES, OIL COOLER BYPASS ...................................... 24 - 27 2D11 VALVE BLOCK .................................................................. 50 - 55

1D21 TURBOCHARGER ............................................................ 24 - 38 5G6 VALVE BLOCK AND HYDRAULIC LINE,

1D21 TURBOCHARGER GASKET ............................................ 24 - 38 DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -2

1D21 TURBOCHARGER OIL LINES ........................................ 24 - 38 5G7 VALVE BLOCK SOLENOID

1F23 TURN LIGHTS .................................................................. 40 - 9 DIAL-A-MATIC HEADER HEIGHT CONTROL ............ 160 -3

2G1 TURN SIGNAL SWITCH .................................................. 60 - 18 1D1 VALVE SEAT INSERTS.................................................... 24 - 18

3J16 TURN SIGNAL SWITCH .................................................. 90 - 66 2D25 VALVE, CONTROL .......................................................... 50 - 70

2E1 VALVE, CONTROL, SOLENOID(FOUR-WHEEL DR.) .... 50 - 71

3C17 VALVE, DIAL-A-MATIC HEADER HEIGHT...................... 70 - 37

U 1E23 VALVE, DRAIN, FUEL TANK .......................................... 30

3D16 VALVE, FIVE STACK SOLENOID CONTROL ................ 70 - 64

4D9 U-JOINT, DRIVESHAFT, CONTOUR MASTER .............. 110 -54 1E9 VALVE, FUEL CHECK...................................................... 24 - 50

1C20 UNDERSIZE CRANKSHAFT KIT 2C19 VALVE, HYDRO. DR. DISPLACEMENT CONTOL .......... 50 - 38

(CONNECTING ROD JOURNAL) ................................ 24 - 12 2C24 VALVE, MANIFOLD .......................................................... 50 - 43

1E21 UNDERSIZE MAIN BEARING CRANKSHAFT AND 2D11 VALVE, MANIFOLD .......................................................... 50 - 55

BEARING KIT .............................................................. 24 - 62 1D11 VALVE, OIL FILTER BYPASS.......................................... 24 - 28

2G3 UNIVERSAL JOINT WITH SHAFT (STEERING) ............ 60 - 20 1D13 VALVE, OIL PAN DRAIN .................................................. 24 - 30

4H5 UNIVERSAL JOINT, PRIMARY COUNTERSHAFT ........ 121 -12 1D6 VALVE, OIL PRESSURE REGULATING ........................ 24 - 23

5G14 UNLOADING AUGER BELTS .......................................... 170 -4 1D11 VALVE, OIL PRESSURE REGULATING ........................ 24 - 28

5F21 UNLOADING AUGER COUNTERSHAFT DRIVE ............ 130 -58 3B13 VALVE, REEL DRIVE FLOW CONTROL ........................ 70 - 6

5F23 UNLOADING AUGER DRIVE BELT GUIDE .................... 130 -60 3D14 VALVE, SOLENOID CONTROL, FOUR STACK ............ 70 - 62

5F12 UNLOADING AUGER HOUSING, HORIZONTAL 3D9 VALVE, SOLENOID CONTROL, HEADER LIFT

(EXPORT) (17 AND 20 FT.)........................................ 130 -48 MODULE ...................................................................... 70 - 56

5F10 UNLOADING AUGER HOUSING, HORIZONTAL 3D8 VALVE, SOLENOID CONTROL, RELIEF ........................ 70 - 54

(20 FT.) ........................................................................ 130 -46 3D19 VALVE, SOLENOID CONTROL, SIX STACK .................. 70 - 68

1I1 UNLOADING AUGER LIGHT AND HARNESS................ 40 - 64 3K5 VALVES, COMPRESSOR R134A .................................... 90 - 80

1I1 UNLOADING AUGER LIGHT CLAMPS .......................... 40 - 64 1D1 VALVES, EXHAUST.......................................................... 24 - 18

1H24 UNLOADING AUGER LIMIT SWITCH ............................ 40 - 62 1D1 VALVES, INTAKE.............................................................. 24 - 18

5G3 UNLOADING AUGER LOWER LUBE BANK .................. 130 -66 4J17 VANES, STRAW CHOPPER DECK ................................ 121 -72

1H13 UNLOADING AUGER SENSOR AND WIRING 3B16 VARIABLE DRIVE HYDRAULIC HOSE, FEEDER

HARNESS .................................................................... 40 - 50 HOUSE.......................................................................... 70 - 9

3E5 UNLOADING AUGER SWING CYLINDER ...................... 70 - 78 4C22 VARIABLE DRIVE, FEEDER HOUSE, UPPER

3E5 UNLOADING AUGER SWING CYLINDER MOUNTING 70 - 78 COUNTERSHAFT ........................................................ 110 -42

5F3 UNLOADING AUGER SWIVEL, HORIZONTAL .............. 130 -38 4B15 VARIABLE FRONT SHAFT WITH REVERSER .............. 110 -8

5G1 UNLOADING AUGER UPPER LUBE BANK.................... 130 -64 4H13 VARIABLE SHEAVE AND SUPPORTS, PRIMARY

3E3 UNLOADING DRIVE CYLINDER, GRAIN TANK ............ 70 - 76 COUNTERSHAFT ........................................................ 121 -20

4G20 UNLOADING DRIVE, STRAW CHOPPER AND 4B17 VARIABLE SPEED DRIVE TIGHTENER ........................ 110 -10

SEPARATOR DRIVE GEAR- ENGINE GEARCASE .. 121 -2 4C22 VARIBLE DRIVE, FEEDER HOUSE, UPPER

4G22 UNLOADING DRIVE, STRAW CHOPPER AND COUNTERSHAFT SUPPORTS.................................... 110 -42

SEPARATOR DRIVE GEAR, ENGINE GEARCASE .. 121 -4 5E24 VERTICAL AUGER LOWER GEAR CASE...................... 130 -34

5G15 UNLOADING SYSTEM BELTS ........................................ 170 -5 1I7 VOLTAGE REGULATOR, ALTERNATOR (95 AMP)

5D24 UPPER CLEAN GRAIN ELEVATOR ................................ 130 -8 BOSCH.......................................................................... 40 - 70

5E1 UPPER CLEAN GRAIN ELEVATOR SHAFT,

SPROCKET AND SHEAVE.......................................... 130 -10

5E14 UPPER CLEAN GRAIN ELEVATOR SHIELDS .............. 130 -24 W

5E3 UPPER CLEAN GRAIN LOADING AUGER HOUSING .. 130 -12

5E5 UPPER CLEAN GRAIN LOADING AUGER HOUSING .. 130 -14 5G12 WALKER BELTS .............................................................. 170 -2

1H18 UPPER HARNESS FOR ENGINE.................................... 40 - 56 4G9 WALKERS, STRAW .......................................................... 120 -70

5D10 UPPER REAR TAILINGS SHIELD .................................. 125 -52 1H22 WARNING SWITCH, AIR FILTER .................................... 40 - 60

3D1 UPPER RETURN LINES, HOSES, RESERVOIR ............ 70 - 46 1C21 WASHER, THRUST .......................................................... 24 - 13

4C8 UPPER SHAFT, FEEDER HOUSE .................................. 110 -28 1G16 WASHER, WINDSHIELD .................................................. 40 - 28

2F23 UPPER STEERING HOSES ............................................ 60 - 16 1D19 WATER MANIFOLD GASKET .......................................... 24 - 36

5G15 UPPER TAILINGS AUGER BELT .................................... 170 -5 1D19 WATER MANIFOLD, FRONT .......................................... 24 - 36

5D6 UPPER TAILINGS AUGER DRIVE .................................. 125 -48 1D17 WATER PUMP .................................................................. 24 - 34

5D3 UPPER TAILINGS AUGER HOUSING AND PADDLE 1D17 WATER PUMP GASKET .................................................. 24 - 34

ASSEMBLY .................................................................. 125 -44 1D17 WATER PUMP O-RING .................................................... 24 - 34

5D3 UPPER TAILINGS AUGER PADDLE ASSEMBLY .......... 125 -44 1D17 WATER PUMP OIL SEAL ................................................ 24 - 34

5D6 UPPER TAILINGS AUGER, DRIVE AND SHIELD .......... 125 -48 1D17 WATER PUMP RETAINING RING .................................. 24 - 34

10-28 9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00)

- 2

PN=28

1B5

9610 MAXIMIZER™ COMBINE

ALPHABETICAL INDEX - CONTINUED

GRID PAGE GRID PAGE

1D17 WATER PUMP SEAL KIT ................................................ 24 - 34 Y

1F1 WATER SEPARATOR ...................................................... 30 - 4

4B24 WEAR PLATE, FEEDER HOUSE .................................... 110 -18 4D9 YOKE, DRIVESHAFT ........................................................ 110 -54

4C1 WEAR PLATES, FEEDER HOUSE - CONTOUR 2D21 YOKE, PIVOTS, AND CAPS (STEERABLE MOTOR) .... 50 - 66

MASTER ...................................................................... 110 -20

1I18 WEATHERPACK CONNECTORS .................................... 40 - 82

1I18 WEATHERPACK TERMINALS ........................................ 40 - 82

3H14 WEATHERSTRIP. CAB DOOR ........................................ 90 - 12

3H6 WEATHERSTRIP, CAB .................................................... 90 - 4

3F19 WEATHERSTRIP, REAR HOOD ...................................... 80 - 18

2H3 WEIGHTS, WHEEL AND REAR WHEELS ...................... 60 - 46

3E9 WET CLUTCH OIL COOLER LINES, HOSES ................ 70 - 82

4C14 WHEEL, FEEDER CONVEYOR DRIVE CHAIN .............. 110 -34

2B15 WHEEL, HIGH FLOATATION DRIVE

PLANETARY FINAL DRIVE ........................................ 50 - 7

4H15 WHEEL, SINGLE RANGE CYLINDER DRIVE ................ 121 -22

2G1 WHEEL, STEERING ........................................................ 60 - 18

3J16 WHEEL, STEERING ........................................................ 90 - 66

2B14 WHEELS, DRIVE .............................................................. 50 - 6

2H5 WHEELS, REAR (4-WHEEL DRIVE/CAM LODE

MOTOR) ........................................................................ 60 - 48

2H3 WHEELS, REAR, AND WHEEL WEIGHTS .................... 60 - 46

2B16 WIDE-SPACED DUAL WHEELS

(PLANETARY FINAL DRIVE) ...................................... 50 - 8

5E16 WINDOW, TOP GRAIN TANK.......................................... 130 -26

1G16 WINDSHIELD WASHER .................................................. 40 - 28

1G12 WINDSHIELD WIPER (LONG) ........................................ 40 - 24

3H14 WINDSHIELD, CAB .......................................................... 90 - 12

5B24 WINGS, CHAFF SPREADER PAN .................................. 125 -14

1G14 WIPER (SHORT) .............................................................. 40 - 26

1G12 WIPER BLADE, WINDSHIELD ........................................ 40 - 24

1G14 WIPER BLADE, WINDSHIELD ........................................ 40 - 26

1G14 WIPER, WINDSHEILD (SHORT)...................................... 40 - 26

1G12 WIPER, WINDSHIELD (LONG) ........................................ 40 - 24

1I24 WIRING AND TERMINAL KIT .......................................... 40 - 88

1I24 WIRING CRIMPING TOOL .............................................. 40 - 88

1H3 WIRING HARNESS ADAPTER (CONTOUR MASTER) .. 40 - 40 1H5 WIRING HARNESS ADAPTER (CONTOUR MASTER) .. 40 - 42

1G9 WIRING HARNESS, A/C, HEATER AND AIR SEAT ...... 40 - 20

3B9 WIRING HARNESS, ACCUMULATOR PRESSURE

GAUGE.......................................................................... 70 - 2

1G1 WIRING HARNESS, ARMREST ...................................... 40 - 12

1F16 WIRING HARNESS, CAB ................................................ 40 - 2

1F15 WIRING HARNESS, CAB DOME LIGHT ........................ 40 - 1

1J9 WIRING HARNESS, CONVENIENCE OUTLET .............. 40 - 98

1I1 WIRING HARNESS, DUAL LEVEL MONITOR................ 40 - 64

1J11 WIRING HARNESS, FEEDER HOUSE BACKSHAFT

SPEED SENSOR.......................................................... 40 - 100

1H24 WIRING HARNESS, GRAIN TANK .................................. 40 - 62

1H16 WIRING HARNESS, HARVESTRAK MONITOR.............. 40 - 54

5F7 WIRING HARNESS, HORIZONTAL UNLOADING

AUGER.......................................................................... 130 -42

1G24 WIRING HARNESS, L.H. MAIN, FRONT ........................ 40 - 36

1G20 WIRING HARNESS, LH. MAIN, FRONT

(S.N. -680100) ...................................................... 40 - 32

1H3 WIRING HARNESS, MAIN, L.H. CENTER ...................... 40 - 40

1H5 WIRING HARNESS, MAIN, L.H. CENTER ...................... 40 - 42

1H9 WIRING HARNESS, R.H. MAIN ...................................... 40 - 46

1E15 WIRING HARNESS, STARTER........................................ 24 - 56

1G7 WIRING HARNESS, STEERING COLUMN .................... 40 - 18

1H13 WIRING HARNESS, UNLOADING AUGER .................... 40 - 50

1I1 WIRING HARNESS, UNLOADING AUGER LIGHT ........ 40 - 64

1H1 WIRING HARNESS,L H MAIN, L H FRONT .................. 40 - 38

1B9 WIRING LEAD, ROTARY SCREEN DOOR .................... 20 - 4

1I24 WIRING STRIPPING TOOL.............................................. 40 - 88

1J1 WIRING, SUPPLEMENTARY TERMINALS AND

CONNECTORS ............................................................ 40 - 90

9610 MAXIMIZER™ COMBINE PC2702 (30-MAY-00) 10-29

PN=29

MEMORANDA

9610 MAXIMIZER™ COMBINE

10-30 9610 MAXIMIZER™ COMBINE PC2702 (24-SEP-99)

PN=30

+ 1013 hidden pages