Jensen JMS2214BT User Manual

iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
JMS2214BT
MARINE AUDIO SYSTEM
Installation and Operation Manual
JMS2214BT
CONTENTS
Safety Information .................................................................................................................... 1
Installation ................................................................................................................................ 2
Wiring ....................................................................................................................................... 4
Basic Operation ........................................................................................................................ 5
Tuner Operation........................................................................................................................ 7
Digital File Playback ................................................................................................................. 9
SIRIUSXM Radio Operation ................................................................................................... 10
iPod® Operation ..................................................................................................................... 12
Bluetooth Operation ................................................................................................................ 14
Care and Maintenance ........................................................................................................... 16
Troubleshooting ...................................................................................................................... 16
Specifications ......................................................................................................................... 17
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
ii
JMS2214BT
SAFETY INFORMATION
When Boating
Keep the volume level low enough to be aware of your surroundings.
Protect from Water
Do not submerge or expose the product directly to water, as this can cause electrical shorts, fire or other damage
Protect from High Temperatures
Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vessel. Give the interior a chance to cool down before starting playback. Do not mount radio with close proximity of engine compartment.
Use the Proper Power Supply
This product is designed to operate with a 12 volt DC negative ground battery system.
WARNING:
DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANYWAY. Doing so may result
in fire, electric shock or product damage.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSE. Failure to do so may
result in fire, electric shock or product damage.
DO NOT INSTALL IN LOCATIONS THAT MIGHT HINDER VEHICLE OPERATION. Doing
so may obstruct vision or hamper movement which can result in a serious accident.
INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR
SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wires insulation from being cut by the metal edge of the hole. It is also recommended to apply sealing caulk to any opening that may potentially allow water to enter.
Be sure to choose a location that is flat and has clearance above the unit to prevent any
damage, as well as allow for ventilation
Before drilling any holes, carefully inspect the area underneath and behind the mounting
surface where the devices will be mounted to make sure it will not interfere with existing wires, fuel lines, the fuel tank or any other objects that could be damaged.
Always disconnect the vehicle negative battery terminal to prevent accidental shorting
during installation.
1
JMS2214BT
7/8 HOLE IS REQUIRED M4 MOUNTING SCREWS (4-PCS)
MINIMUM SCREW LENGTH 1 1/2
M5 x 8 SCREWS REQUIRED 7/8 HOLE IS REQUIRED
INSTALLATION
Before you Begin
Before you begin, always disconnect the battery negative terminal.
Important Notes
Before final installation, test the wiring connections to make sure the unit is connected
properly and the system works.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer prior if installation required the drilling of holes or other
modifications to your vessel.
Install the unit where it does not interfere with driving and cannot injure passengers if there
is a sudden or emergency stop.
Avoid installing the unit where it will be subject to high temperatures from direct sunlight,
hot air, or from a heater, or where it would be subject to excessive dust, dirt or vibration.
Wired Commander Mounting
1. Choose a mounting area for the wired commander that is clean and flat, allowing the rear gasket to fully seal to the mounting surface
2. Secure the wired commander using either of the recommended mounting methods detailed in the diagrams below.
FOR CABLE
2
FOR CABLE
FOR MOUNTING MAXIMUM SCREW DEPTH IN COMMANDER 1/4”
JMS2214BT
1 3/4” HOLE REQUIRED FOR CABLE/CONNECTOR
STAINLESS STEEL #8 SCREWS REQUIRED
.180 PILOT HOLES WHEN USING THREADED MACHINE SCREWS
TUNER AMPLIFIER MODULE
WIRED
COMMANDER
WIRED COMMANDER COVER POWER HARNESS
10 FOOT WIRED COMMANDER EXTENSION CABLE
STAINLESS STEEL TAPPING SCREW (x4)
Hardware Kit Contents
Tuner/Amplifier Mounting
1. Choose a mounting area for the tuner/amplifier module that will provide plenty of ventilation to prevent the amplifier from overheating. The tuner/amplifier module can be mounted in the horizontal or vertical position. Please note that when mounting in vertical position, do not mount with the harness exit points facing straight up, as water can collect around the chassis in these areas.
2. Using the shortest length of the recommended size screws possible, mount the tuner/amplifier as detailed in the diagram on the right.
3. Route the tuner/amplifier harness and cable throughout the vessel as required. Keep some slack in the harness/cables so it won't be too tight, as this can cause damage to the wires.
4. Follow the wiring diagram carefully and make certain all connections are secure and insulated with crimp connectors or electrical tape to ensure proper operation.
5. After completing the wiring connections, reconnect the negative terminal of the battery and turn the unit on to confirm operation (vessel accessory switch must be on). If the unit does not operate, disconnect battery, recheck all wiring and refer to the trouble-shooting guide located in the back of the manual.
WITH MINIMUM LENGTH OF 1” 1/8” PILOT HOLES FOR SUPPLIED SELF-STARTING SCREWS
Reconnect Battery
When wiring is completed, reconnect the battery negative terminal.
3
JMS2214BT
TUNER/AMP MODULE
WIRED COMMANDER
WIRING
4
Loading...
+ 14 hidden pages