Janome 1110DX User Manual

So Advanced, So Quick, So Easy To Thread

3-Thread Rolled Hem

2-Thread Picot Hem

Hem On Flared Fabric

3-4 Thread or 2-Thread Serging

Decorative Overedge Wide

Decorative Flatlock

Decorative Overedge Narrow

Gathering

4-Thread Seam

Narrow Overedge Seam

Wide Overedge Seam

Lettuce Edge

asy-To-Follow Upper Thread Guides

E

The Threading Chart and Color-Coded Guides are easy to follow
for 2-thread or 3-4 thread serging.

Dual Feed Dogs And Differential Feed
E

nsure Optimum Precision

The 1110DX has a Differential
Feed device with two feed dogs,
virtually eliminating puckered
edges on woven fabrics and
stretched edges on knits.
One feed dog moves the exact
amount of fabric needed for
the stitch length while the other
pushes or pulls the fabric
according to the ratio on the
eed dial. This ratio can be set
anywhere from 0.5 to 2.25.

Adjustable Cutting Width.

Easy To Reach Lower Looper Guides

Threading the Lower Looper is a breeze
when you have easy access. Just rotate
the thread guide and the lower looper
thread guides pop into view.

Easily Retractable Upper Knife.

Quick Change Rolled Hem

STD.

R.H.

No need to change the needle plate
for rolled hemming. Just slide the
needle plate to “R” position and
choose “R.H.”on the lower looper
pre-tension setting slider.

Differential Feed 0.5-1.0

SEAM TYPE: 2 and 3/4 THREAD OVERLOCK
NEEDLE: REGULAR TYPE (15x15P)
SEAM LENGTH: 1-5mm
SEAM WIDTH: 3.5mm (regular); 5.7mm (wide);

2.00mm (narrow)
DIFFERENTIAL FEED RATIO: 0.5-2.25
NEEDLE GUARD: FRONT & BACK
CUTTING WIDTH: ADJUSTABLE
UPPER KNIFE: RETRACTABLE
TENSION DIALS: NUMBERED
THREAD GUIDES: COLOR-CODED
PRESSER FOOT: SNAP-ON TYPE
SPEED CONTROL: ELECTRONIC

Differential Feed 1.0-2.25

SPECIFICATIONS

(ONE ROTATION)

Solid metal base plate keeps
machine stable, quiet and
smooth running.

©2006 Janome America, Inc.