Jabra CRUISER Quick Start Manual

NEED MORE HELP?

Access website www.jabra.com/CRUISER for full user manual

CUSTOMER CONTACT DETAILS:

© 2009 GN Netcom US, Inc. all rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and speciﬁcations subject to change without notice).

Made in Korea

TYPE: HFS001

word

www.jabra.com

Jabra® CRUISER

Quick start manual

www.jabra.com

www.jabra.com/nasupport

(for the latest support info and online User Manuals)

1 (800) 327-2230 (U.S.)

1 (800) 489-4199 (Canada)

GN Netcom Inc. • 77 Northeastern Boulevard • Nashua, NH 03062 • USA

For more information please visit

www.jabra.com

81-03031 D

PIN code: 0000

EN NB: Chapter headings and illustrations share the same number to aid

understanding.

FR Remarque : pour faciliter la compréhension, les en-têtes de chapitre et les

illustrations portent les mêmes numéros.

PT Obs: Os cabeçalhos e as ilustrações do capítulo usam o mesmo número para

auxiliar na compreensão.

ES Nota: Para evitar confusiones, los encabezados de los capítulos y las

ilustraciones tienen la misma numeración.

PLEASE NOTE: Before using your new Jabra CRUISER Speakerphone, you must fully charge it and set it up by ‘pairing it’ with your selected

device.

1. About your JAbrA CruISEr SPEAKErPHoNE

1 Answer/end button 2 FM button 3 Volume up/volume down button 4 Charging socket 5 On/o button 6 Play/pause/stop button 7 Next track 8 Previous track 9 Battery status icon 10 Call status icon 11 Connection status icon 12 FM status icon 13 Visor clip

2. CHArGING your SPEAKErPHoNE

Insert charger and remove when fully charged and the Battery status icon turns green. Charging time is approximately 2 hours.

3. turNING your SPEAKErPHoNE oN ANd off

Slide the on/o button to turn the speakerphone on or o.

4. PAIrING tHE SPEAKErPHoNE WItH your PHoNE

First time pairing: Turn the speakerphone on and it will automatically be in pairing mode. The Connection status icon will ash rapidly.

Later pairing:

- Turn the speakerphone on and press answer/end button for 5 seconds.

- Release the button when the Connection status light ashes rapidly and you hear the voice announcement “pairing mode”.

- Activate

- Search for

- Press “OK” on the phone and if you are asked for a PIN code, conrm with PIN code 0000 (4 zeros).

on your phone.

devices and select Jabra CRUISER.

5. uSING your SPEAKErPHoNE

Answer a call

- The name of the incoming caller is announced if phonebook access is supported by your phone. If not, only the number will be announced.

- Tap the answer/end button on your speakerphone to answer a call.

End a call

- Tap the answer/end button on your speakerphone to end an active call.

Make a call

- The call will automatically transfer to your speakerphone*. If not tap the answer/end button.

Play or pause music

- Tap the play/pause/stop button to play or pause music.

Stop music

- Press (approximately 2 seconds) the play/pause/stop button.

Change between music tracks*

- Tap next track or previous track button.

Adjust sound and volume*

- Tap volume up/volume down button to adjust the volume level. (In FM mode your are not able to adjust volume via Jabra CRUISER – use your car stereo).

Sleep mode

- When disconnected from the phone, the speakerphone turns o automatically after 10 minutes. Tap the answer/end button to turn the speakerphone on again.

*Phone dependent

Using FM transmitter

The FM transmitter in the speakerphone allows you to transmit calls and music from your phone to the car stereo.

- Connect your phone and your speakerphone.

- Tap the FM button to enter FM mode. The FM status icon will turn solid red and an FM frequency will be announced.

- Manually turn your radio into the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo.

- The FM transmitter will automatically turn o after 10 minutes if the function is not used.

Change FM frequency

Jabra CRUISER will always transmit calls and music on the most recently used FM frequency. However if sound performance is unsatisfactory it is possible to select a new FM frequency.

- Enter FM mode.

- Press volume up button until “searching” is announced.

- When a new frequency is found and announced, tune your radio manually into the same FM frequency.

A tap on the volume up/volume down button will change the frequency on your Jabra CRUISER by 0.1 MHz.

Change voice announcement language

Voice announcements give you a more convenient and safe use of Jabra CRUISER. There are 5 supported languages: English, Spanish, French, German and Russian. Default language is English.

- Enter pairing mode by pressing the answer/end button for 5 seconds.

- Press the FM button for 2 seconds and the current language will be announced.

- Press the volume up/volume down to select a new language.

- Select preferred language and press the FM button for 2 seconds. The new language will be announced.

For Italian, Portuguese, Chinese Mandarine please go to www.jabra.com and download an alternative software version.

6. PlACE tHE JAbrA CruISEr IN your vEHIClE

The Jabra CRUISER sits discreetly and conveniently on the sun visor. For optimal sound quality place the Jabra CRUISER right in front of you and speak directly into the speakerphone.

Note: The visor clip works as the FM antenna. The FM transmitter will not work if the visor clip is removed. Use of the FM transmitter portion of this product is restricted in some countries. Please check your local legislation.

Calls and music streamed to your FM radio using the FM transmitter can potentially be picked up by another radio in close proximity. This is only relevant when using the FM transmitter mode.

Visit www.jabra.com/CRUISER for full user manual.

+ 15 hidden pages