Installation Instructions
P/N 962-054-025
Revision A
February 2000
Uninterruptible Power Supply
P/N 962-054-025 Revision A
*962054025*
Mobile DC-DC
Introduction
This block diagram shows the power connections for including an uninterruptible power
supply (UPS) on electricĆpowered vehicle installations. Mounting hardware is the same
as for the DCĆDC converter (see Installation Manual P/N 962Ć054Ć004 for details).
Mobile
Computer
Ferrite bead, molded-on
(location unimportant)
out
Both Cables
P/N 226-341-001
In
DC-DC Converter
P/N 851-041-001
Uninterruptible
Power Supply
Ferrite bead, molded-on
(orient closest to dc-dc converter))
"
"
Ferrite bead, on-site installation
(orient closest to dc-dc converter))
Cable
P/N 226-340-001
Inline fuse and cable termination
(see manual P/N 962-054-004)
Battery Information
The UPS battery requires 3-4 hours to become fully charged.
Remove the UPS cover to access the battery for replacement.
Loading...