Interlogix NX-587E Specsheet

Intrusion

NetworX Virtual
Keypad Module

Overview

The NetworX Virtual Keypad Module connects directly with a
NetworX control panel and remote computer to enable full NX-148E
or NX-1192E keypad emulation. Text interface allows dealers and
integrators to view and enter keypad commands on a computer
screen. Plug-and-play design allows dealers and integrators to
program NetworX control panel using their own custom software.

The NetworX Virtual Keypad Module enables dealers and integrators
to program NetworX control panels via computer. Compatibility with
partner system provider software enables users to learn or program
custom messages in the same manner as a regular LCD keypad.
Design enables remote information requests and system tests
without fear of unwanted changes occurring; while passing special
partition and zone messages to host when a change does occur.

Stan dard Featur eS

• Enables any remote system to use RS-232 to communicate
with NetworX control panels

• Dongle design mounts at host system and wires to the
NetworX bus

• No requirements for special message formatting
and checksums

• Passes all text, LED and buzzer conditions

• Can be used in master or temporary master modes

• Bilingual English and Spanish operation

Specifications

Operating current

(from control panel)

Compatibility

Dimensions

(W x H xD)
Weight 1 lb.

30mA maximum

NX-4, NX-6, NX-8, NX-8E Control Panels
NX-148E, NX-1192E Keypads

1.7 x 4.0 x 1.0 in.

Ordering Information

NX- 587E

Virtual Keypad Module. Allows Any Remote System
to Use RS-232 to Communicate w/a NetworX Control

Panel

North America

T 855-286-8889

Latin America

T 561-998-6114

interlogix.com

Specications subject to change without notice.

© 2013 United Technologies Corporation.

All rights reserved.

Interlogix is part of UTC Climate, Controls & Security,

a unit of United Technologies Corporation.

305-3663 2013/11 (75037)