Intellinet Network Solutions KVM 157032, KVM 157025 User Manual

INT-157025/157032-QSG-1106-01

KVM SWITCH

QUICK START GUIDE

MODELS 157025 & 157032

2

Thank you for purchasing this INTELLINET NETWORK SOLUTIONS™ KVM Switch. This compact
KVM Switch with Audio and Mic switching functionality allows you to access, control, boot and
reboot two (Model 157025) or four (Model 157032) USB-enabled multimedia computers with only
one USB keyboard, mouse, monitor and optional speaker set and microphone, using the Switching
Software Client installed on your PCs.

INSTALLATION

1. Insert the enclosed CD into your CD drive. The
installer program, USBKVMIn.exe, will run (or you
can find it with Explorer and double-click its icon
to start installation). Complete the software
installation on each PC to be connected to the
switch. When completed, you’ll see a KVM
Switcher icon on the system tray of the desktop.
Right-click to display the operation menu; double­ click to display the configuration box. (See KVM
Switcher section for details.)

No live connection
detected

Current active PC channel
is on port 1 (or 2, 3 or 4)

3

NOTE: The KVM Switcher software supports only the Windows operating system on PC platforms.
For other OS platforms, such as Linux, you can still use the keyboard hotkey — ScrLk + ScrLk — to
switch PCs. However, this switching hotkey is not available on non-PC platforms such as MacOS.
When connected to a Mac, use the face-panel button to switch ports.

2. Connect the shared USB keyboard, mouse,
monitor, speaker/headphone and microphone
each to its port on your KVM Switch.

3. Connect each KVM PC port to a computer using
the slim 3-in-1 KVM combo cable and the audio/
mic cable. Once you have
connected the switch and
computers properly, you can
operate the KVM Switch.

NOTE: Some older computers with
a USB interface may need to
manually enable the USB option in
the BIOS settings before using any
USB devices. If your USB interface does not
work, check the USB option status in the BIOS.