Intel ITX-IC2M1026S Series, ITX-IC8M1026 Series User Manual
Rev: 0.1, October,2012
User’s Manual
ITX-IC2M1026S
ITX-IC8M1026Series
Motherboard
Intel Atom Series Martherboard
Disclaimer
The intellectual property of this manual belongs to our company. The ownership of all of the
products, including accessories and software etc. belong to our company. No one is permitted to
copy, change, or translate without our written permission.
We compiled this manual based on our careful attitude, but we can not guarantee the accuracy
of the contents. This manual is purely technical documentation, without any hint or other
meanings, and we won't commit users' misunderstanding of the typesetting error.
Our products are in continuous improvement and updating, Therefore, we retain the right that
we won't give notice to the users in future.
Copyright
All of the trademark in this manual belong to their own registered company.
All of the products name is only for identication, its title belongs to its manufacturer or brand
owner.
Chapter 1 Introduction
............................................................................. 4
1.1
Package Checklist
....................................................................................................4
1.2
Specications
..........................................................................................................5
1.3
Mainboard Layout
....................................................................................................6
1.4
Connecting Rear Panel I/O Devices
............................................................................7
Chapter 2 Hardware Setup
..........................................................................8
2.1 Installing the I/O rear panel........................................................................................8
2.2 Installing motherboard to chassis.................................................................................8
2.3 Installing Memory
Module
............................................................................................9
2.4
Connecting Peripheral Devices
.................................................................................10
2.4.1 Serial ATA
Connectors
........................................................................................................10
2.4.2 MPCIE
slot
.........................................................................................................................10
Chapter 3 Jumpers & Headers Setup
..........................................................11
3.1
Checking Jumper Settings
.......................................................................................11
3.2 Clear CMOS Header Setting .......................................................................................11
3.3 Jumpers Setting.......................................................................................................12
3.4 Front panel pin interface...........................................................................................13
3.5 J
LVDS1
pin interface..................................................................................................13
3.6
LPT
pin interface......................................................................................................14
3.7 Front
VGA
pin interface..............................................................................................15
3.8
GPIO
pin interface.....................................................................................................15
3.9
JINVERT1
pin interface ............................................................................................16
3.10
IRDA
pin interface ..................................................................................................16
3.11 F
USB1/2/3
expansion interface.................................................................................17
3.12
Front Panel Audio output
interface..........................................................................17
3.13 S/PDIF
output
interface..........................................................................................18
3.14 COM
Connectors
...................................................................................................18
3.15 KM1
（PS/2interface adapter
）
................................................................................19
3.16 SATA1/2_PWR
（SATA
Power interface）and
J14(DC
Power interface）..........................19
Chapter 4 BIOS Setup Utility
.....................................................................20
4.1
About BIOS Setup......
.............................................................................................20
4.2 BIOS
Setup
..........................................................................................................20
4.2.1
To run
BIOS
setup
..........................................................................................................20
4.2.2
Control Keys
................................................................................................................22
4.2.3
Main
...........................................................................................................................23
4.2.4
Advanced
....................................................................................................................23
4.2.5
Chipset
.....................................................................................................................29
4.2.6
Boot
............................................................................................................................31
4.2.7
Secunity
.............................................................................................................32
4.2.8
Exit
................................................................................................................................33
Chapter 5 Driver Installation
....................................................................34
Appendix:
Toxic and hazardous substances or elements logo
......................35
Table of Contents
- 4 -
Intel Atom Series User’s Manual
Chapter 1 Introduction
1.1 Package Checklist
Thank you for choosing our products.
Before using your product, please make sure your packaging is complete, if there have
damage or you nd any shortage, please contact your supplier as soon as possible.
• Motherboard x 1
• COM Data Cable x 1
• SATA Data Cable x 1
• SATA Pwer Cable x 1
• DC Extension Cable x 1
• User's Manual x 1
• Driver x 1
The above accessories and speci cations are only for reference, we reserve the modify rights.
- 5 -
Intel Atom Series User’s Manual
1.2 Motherboard specications
CPU - Intel®“Atom”D2550/N2800 ( optional
）
Chipet - Intel Atom + NM10 chipets
Memory
- 1x204-pin DDRIII SO-DIMM sockets
- Support for DDRIII SO-DIMM Memory
- Supporting up to 4GB of system memory
Expansion slots - 1 x Mini PCIE slot
Rear Panel I/O
- 1 x J1 interface(DC power
）
- 1 x VGA interface
- 1 x HDMI interface
- 2 x RJ45 interface
- 2 x USB 2.0 interface，Backward compatible with USB 1.1
- 2 x Audio interface(Line Out/Mic In)
Internal
Connectors
- 1 x 4-pin DC power socket
- 3 x USB pin，Connecting to 6 Additional External USB 2.0
- 6 x COM(9pin Charged way，5V/12V optional
）
- 1 x LPT pin
- 1 x Front Audio pin
- 1 x IRDA pin
- 1 x SPDIF Outpin
- 1 x LVDS pin( Supporting Double show mode by VGA
）
- 1 x JVGA pin
- 1 x GPIO pin
- 2 x FAN pin
- 1 x Front panel pin
- 2 x SATAII conection interface
BIOS/Power Management
- AMI BIOS
- 16MBit SPI BIOS
- Supporting Advanced Power Management ACPI
- CPU Temperature, Fan speed, System Voltage Monitoring
Audio
- Onboard 2 HD Audio Codec
-
Front
Audio
Interface , providing stereo MIC port on front pane
l
LAN - 2 x onboard 10/100/1000Mbps compatible LAN
Form Facto - Mini-ITX(170mm * 170mm)
Working Environment
- Working Temperature ：-10～60°C
- Working Moisture：5%～95% No Frost
- 6 -
Intel Atom Series User’s Manual
1.3 Motherboard Layout
(
This picture is only for reference
)
- 7 -
Intel Atom Series User’s Manual
• J1 :
DC
Power interface
。
• VGA : Connecting to a monitor's VGA input
。
• HDMI :Connecting to a monitor's HDMI input.
• USB :
USB
Connecting Interface
。
• LAN:The LAN port allows the motherboard to connect to a local area network by means
of a network hub.
• AUDIO :
Line-out (Front Left/Right Jack, Lime): This jack is used to connect to the front left and
right channel speakers of the audio system.
Mic-in (Pink): This jack is used to connect an external microphone.
1.4 Connecting Rear Panel I/O Devices
(
This picture is only for reference
)
- 8 -
Intel Atom Series User’s Manual
Chapter 2 Hardware Setup
2.1
Installing
I/O Panel
It can block the transmission of electric RF, protect the internal components, and promote
airow after installing this panel. Before installing motherboard, you need to install this panel. If
required, you should uninstall the optional panel rst.
2.2
Installing Motherboard
Most computer bases have many xing holes to allow the mainboard to attached securely,
and will not short. There are two ways to attach the mainboard:
(1) Using studs
(2) Using spacers
Usually, the best way to attach the board is using
studs. When you are unable to use studs, spacers can
attach the board also. Please check the board
carefully, you will nd there are many xing holes,
line up these holes with your computer base. If holes
can line up and there are screw holes, means you can
attach the board with studs. If all holes line up and
there are only slots, means you can only attach with
spacers. Take the tip of the spacers and insert them
into the slots. After doing this, slide the board into slots to x it. Before chassis tted, make
sure everything is ok.
If there have studs locked on board, and there is not xed holes between studs and board,
uninstall the studs to avoid shorting PCB circuit.
- 9 -
Intel Atom Series User’s Manual
2.3 Installing Memory Module
This motherboard provides two 204-pin DDRIII (Double Data Rate) SO-DIMM slots.
Before starting the installation, please read the following warning messages:
1. Make sure your purchased memory specication is supported with the motherboard;
2. Before installing or removing memory, make sure that the computer is turned off;
3. The memory is designed with fool-proof marker, if you insert with wrong direction, it can
not be inserted.
Installing memory:
1. Before installing or removing memory, please turn off the power and unplug the AC cable.
2. Carefully grasp both ends of memory, and do not touch the metal contacts.
3. Align the memory to slots, and pay attention to the direction.
4. Inclining 30 degrees and insert, then press down untill you hear the "clicking" sound (to
avoid any demage, your strengh must be gentle).
5. To remove the memory, push out both latch of DIMM slot at the same time, and take it
out.
Memory installation illustration (only for reference):
Installation of Dual Memory Channels
This board has 2 DIMM slots, and each one representing a memory channel. The memory
works on dual channel mode only when this two memories have been all installed successfully
(Note：When use the dual channel mode, you must select the memories which with the same
capacity, frequency, and brand at the same time).
：Static will demage the electronic components of computer and memory, when doing
above step, you should contact with a grounded metial object to remove the static from your
body.
- 10 -
Intel Atom Series User’s Manual
2.4.1 Serial ATA
connectors
The Serial ATA connectors can
connect to Serial ATA hardware or
other corresponding devices when
use Serial ATA cable
。
2.4.2 MPCIE
slot
2.4
Connecting Peripheral Devices
MPCIE： It compatible with SSD
(
While installing, incline it 30 degrees
and insert,
then press down to bolt position, and
use the screws to x it.)
- 11 -
Intel Atom Series User’s Manual
Chapter 3 Jumpers & Headers Setup
3.1 Checking Jumper Settings
• 2-pin jumper: Plug the jumper cap onto both
pins will make it CLOSE (SHORT). Remove the
cap or plug it on another pins (keep for future
use) will activate the jumper.
• 3-pin jumper: Plug the jumper cap onto pin
1~2 or pin 2~3 will make it CLOSE (SHORT).
shorted by plugging the jumper cap in.
How to identify the PIN1?
Please check the Motherboard carefully, the PIN1
is marked by "1", white thick line or white triangle.
3.2 Unpluging the CMOS Header
When: (a) the CMOS data demaged, (b) you forgot the supervisor or password of BIOS,
(c) you are unable to boot-up because the frenquency of CPU was incorrectly, or (d) there
have modifications on CPU or memory modules, means you need to unplug the CMOS
header.
It uses a jumper cap to clear the CMOS setup, and reset the BIOS value to default.
• Pins 1 and 2 open circuit (Default): Normal situation
• Pins 2 and 3 shorted: Clear CMOS setup
To clear the CMOS setup and set to default values:
1. Power off the system.
2. Plug the jumper cap to pin 2-3, and wait for 3-5 seconds, then plug the cap back to pin
1-2.
3. Power on the system.
4. If the frequency of CPU set incorrect, please press the <Del> button to enter the BIOS
setup menu after powering on system.
5. Reset the running speed of CPU to default or to suitable value.
6. Save and exit the BIOS setup menu.
Default state
ClearCMOS
Loading...