The Intel® Desktop Board D946GZIS may contain design defects or errors known as errata, which may cause the product to deviate
from published specifications. Current characterized errata are documented in this Specification Update.
Revision History
Revision Revision History Date
-001 This document is the first Specification Update for the Intel® Desktop
Board D946GZIS.
-002 Added Specfication Change 1 and 2, corrected AA revisions in the
Gereral Information table, and added additional AA revisions.
-003 Added Specification Change 3. November 2006
-004 Updated General Information table. February 2007
-005 Updated General Information table December 2007
®
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. INTEL PRODUCTS ARE NOT
INTENDED FOR USE IN MEDICAL, LIFE SAVING, LIFE SUSTAINING APPLICATIONS.
Intel may make changes to specifications and product descriptions at any time, without notice.
PRODUCTS. NO LICENSE,
July 13, 2006
September 2006
Designers must not rely on the absence or characteristics of any features or instructions marked “reserved”
or “undefined”. Intel reserves these for future definition and shall have no responsibility whatsoever for
conflicts or incompatibilities arising from future changes to them.
®
The Intel
the product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications before placing your
product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel
literature, may be obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 80217-9808
or call in North America 1-800-548-4725, Europe 44-0-1793-431-155, France 44-0-1793-421-777,
Germany 44-0-1793-421-333, other Countries 708-296-9333
Intel, the Intel logo, and Pentium are trademarks of Intel Corporation in the United States and other
countries.
* Other names and brands may be claimed as the property of others.
This document is an update to the specifications contained in the Intel® Desktop Board
D946GZIS Technical Product Specification (Order Number D56025). It is intended for
hardware system manufacturers and software developers of applications, operating
systems, or tools. It will contain Specification Changes, Errata, Specification
Clarifications, and Documentation Changes.
For specification updates concerning the Intel processor that may apply to this desktop
board, refer to the following:
Pentium® 4 Processor on 90 nm Process Specification Update (Order
Number 302352)
®
Pentium® 4 Processor Specification Update (Order Number 249199)
Unless otherwise noted in this document, it should be assumed that any processor
errata for a given stepping are applicable to the Altered Assembly (AA) revision(s)
associated with that stepping.
Refer to the Intel
Number 313084) for specification updates concerning the 82946GZ GMCH Controller
and that may apply to the desktop board D946GZIS. Unless otherwise noted in this
document, it should be assumed that any MCH errata for a given stepping are
applicable to the Altered Assembly (AA) revision(s) associated with that stepping.
Refer to the Intel
Number 307014) for specification updates concerning the 82801GB I/O Controller Hub
and that may apply to the desktop board D946GZIS. Unless otherwise noted in this
document, it should be assumed that any ICH7 errata for a given stepping are
applicable to the Altered Assembly (AA) revision(s) associated with that stepping.
®
946 Express Chipset Family Specification Update (Order
®
IO Controller Hub7 (ICH7) Family Specification Update (Order
Specification Changes are modifications to the current published specifications.
These changes will be incorporated in the next release of the specifications.
Errata are design defects or errors. Characterized errata may cause the desktop
board behavior to deviate from published specifications. Hardware and software
designed to be used with any given Altered Assembly (AA) and BIOS revision level
must assume that all errata documented for that AA and BIOS revision level are
present on all desktop boards.
Specification Clarifications describe a specification in greater detail or further
highlight a specification’s impact to a complex design situation. These clarifications
will be incorporated in the next release of the specifications.
Documentation Changes include typos, errors, or omissions from the current
published specifications. These changes will be incorporated in the next release of the
specifications.
General Information
Basic Desktop Board D946GZIS Identification Information
AA Revision BIOS Revision Notes
D45436-305 TS94610J.86A.0025 1,2
D45436-306 TS94610J.86A.0025 1,2
D45436-307 TS94610J.86A.0047 1,2
D45436-401 TS94610J.86A.0047 1,2
D45436-402 TS94610J.86A.0047 1,2
D45436-403 TS94610J.86A.0047 1,2
D45436-500 TS94610J.86A.0047 1,2
D45436-501 TS94610J.86A.0047 1,2
D45436-502 TS94610J.86A.0080 1,2
D45436-503 TS94610J.86A.0087 1,2
D66165-300 TS94610J.86A.0025 1,2
D66165-301 TS94610J.86A.0025 1,2
D66165-302 TS94610J.86A.0047 1,2
D66165-401 TS94610J.86A.0047 1,2
D66165-402 TS94610J.86A.0047 1,2
D66165-501 TS94610J.86A.0047 1,2
D66165-502 TS94610J.86A.0080 1,2
D66165-503 TS94610J.86A.0087 1,2
D83227-401 TS94610J.86A.0047 1,2
Intel Desktop Board D946GZIS Specification Update
5
AA Revision BIOS Revision Notes
D83227-402 TS94610J.86A.0047 1,2
D83227-403 TS94610J.86A.0047 1,2
NOTES:
1. The AA number is found on a small label on the component side of the board.
2. The 946 Chipset kit used on this AA revision consists of two components as follows:
Device Stepping S-Spec Numbers
82946GZ C1
C2
82801GB A1 SL8FX
SL9NZ
SL9R4
Summary of Changes
The following table indicates the Specification Changes, Errata, Specification
Clarifications, or Documentation Changes that apply to the Intel
®
Desktop Board
D946GZIS. Intel intends to fix some of the errata in a future revision of the desktop
board, and to account for the other outstanding issues through documentation or
specification changes as noted.
The following notations are used in the table:
Doc: Document change or update that will be implemented.
Plan Fix: This erratum may be fixed in a future revision of the desktop board, driver, or BIOS.
Fixed: This erratum has been previously fixed.
No Fix: There are no plans to fix this erratum.
Shaded: This erratum is either new or modified from the previous version of the document.
No. Plans Specification Changes
1 Doc Change Section 1.1.1 Feature Summary
2 Doc Change Section 1.4 System Memory
3 Doc Changes to Section 1.7.2 Audio Connectors
No. Plans Errata
There are no characterized erratum for this product
The Specification Changes listed in this section apply to the Intel® Desktop Board
D946GZIS Technical Product Specification (Order Number D56025). All Specification
Changes will be incorporated into a future version of that specification.
1. Change to Table 1, Section 1.1.1 Feature Summary
Table 1, Section 1.1.1, Feature Summary will change to remove support for DDR2
800 memory. The revised section of the table will change as follows:
Memory
• Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM)
sockets
• Support for DDR2 667, or DDR2 533 MHz DIMMs
• Support for up to 4 GB of system memory
2. Change to Section 1.4 System Memory
Section 1.4, System Memory will change to remove support for DDR2 800
memory. The revised section will change as follows:
1.4 System Memory
The board has two DIMM sockets and support the following memory features:
• 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
• Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMS with x16 organization are not supported.
•4 GB maximum total system memory. Refer to Section 2.1.1 on page 43 for
information on the total amount of addressable memory.
• Minimum total system memory: 128 MB
• Non-ECC DIMMs
• Serial Presence Detect
• DDR2 667, or DDR2 533 MHz SDRAM DIMMs
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications,
the board should be populated with DIMMs that support the Serial Presence
Detect (SPD) data structure. This allows the BIOS to read the SPD data and
program the chipset to accurately configure memory settings for optimum
performance. If non-SPD memory is installed, the BIOS will attempt to
correctly configure the memory settings, but performance and reliability may
be impacted or the DIMMs may not function under the determined frequency.
Intel Desktop Board D946GZIS Specification Update
7
Table 1 lists the supported DIMM configurations.
Table 1. Supported Memory Configurations
DIMM
Type
DDR2 533 256 Mbit 128 MB 512 MB 1 GB
DDR2 533 512 Mbit 256 MB 1 GB 2 GB
DDR2 533 1 Gbit 512 MB 2 GB 4 GB
DDR2 667 256 Mbit 128 MB 512 MB 1 GB
DDR2 667 512 Mbit 256 MB 1 GB 2 GB
DDR2 667 1 Gbit 512 MB 2 GB 4 GB
DRAM
Technology
Smallest
usable DIMM
(one x16
Single-sided
DIMM)
Largest usable
DIMM (one x8
Double-sided
DIMM)
Maximum
capacity with
two identical x8
Double-sided
DIMMs
NOTE
Regardless of the DIMM type used, the memory frequency will either be equal
to or less than the processor system bus frequency. For example, if DDR2 667
memory is used with a 533 MHz system bus frequency processor, the memory
will operate at 533 MHz.
frequencies based on the combination of DIMMs and processors.
Table 2. Memory Operating Frequencies
Table 2 lists the resulting operating memory
DIMM Type Processor system bus
frequency
DDR2 533 533 MHz 533 MHz
DDR2 533 800 MHz 533 MHz
DDR2 533 1066 MHz 533 MHz
DDR2 667 533 MHz 533 MHz
DDR2 667 800 MHz 667 MHz
DDR2 667 1066 MHz 667 MHz
Resulting memory
frequency
3. The following note will be added to the Technical Product Specification in
Section 1.7.2 Audio Connectors:
INTEGRATOR’S NOTES
Electrostatic discharge (ESD) can damage desktop board components. Frontpanel connectors should provide sufficient protection to prevent ESD damage to
components inside the chassis enclosure.