Intel CV702A, CV700A User Manual
CV700A / CV702A
400
MHz FSB / VGA / LAN / Sound
400MHz FSB . All-in-one
Sound . 3 LAN
SATA150 . ATA 33/66/100 . USB . IrDA . CF
Multi- LAN Board
NO.CV700A / CV702A
Release date: OCT.26.2006
Contents
CV700A / CV702A
CHAPTER 1 GENERAL INFORMATION ........................................................................ 1
1-1 MAJOR FEATURE........................................................................................................ 2
1-2 SPECIFICATION .......................................................................................................... 3
1-3 HARDWARE NOTICE GUIDE .....................................................................................
1-3-1 INSTALLING THE MINI PCI CARD..........................................................................
1-3-3.1 REMOVING THE MINI PCI CARD........................................................................
1-4 PACKING LIST*............................................................................................................
CHAPTER 2 HARDWARE INSTALLATION ...................................................................
2-1 UNPACKING PRECAUTION .......................................................................................
2-2 UNPACKING CHECKUP .............................................................................................
2-3 DIMENSION ................................................................................................................
2-4 LAYOUT ......................................................................................................................
2-5 DIAGRAM ...................................................................................................................
2-5-1 BOTTOM SIDE DIAGRAM / BACK PANEL..............................................................
2-6 INSTALL MEMORY ....................................................................................................
2-7 LIST OF JUMPERS ....................................................................................................
2-8 JUMPER SETTING DESCRIPTION ..........................................................................
2-9 CMOS DATA SET .......................................................................................................
2-10 JCF2 CF CARD POWER VOLTAGE SELECT .........................................................
2-11 JCF1 CF CARD MASTER/ SLAVE SELECT ...........................................................
CHAPTER 3 CONNECTION ........................................................................................ 21
3-1 LIST OF CONNECTORS............................................................................................
3-2 FAN CONNECTOR .....................................................................................................
3-3 IDE CONNECTORS ...................................................................................................
3-4 COMPACT-FLASH MEMORY SOCKET .................................................................... 24
3-5 PARALLEL PORT CONNECTOR ..............................................................................
3-6 SERIAL PORT CONNECTOR ...................................................................................
3-7 KEYBOARD AND MOUSE CONNECTOR ................................................................
3-8 USB PORT / HEADER ............................................................................................... 28
3-9 IR CONNECTOR .......................................................................................................
3-10 VGA CONNECTOR .................................................................................................
3-10.1 VGA HEADER ......................................................................................................
3-11 LAN PORT ...............................................................................................................
3-12 AUDIO PORT CONNECTOR ..................................................................................
3-13 DC 12V IN AND DC OUT ........................................................................................
10
10
11
12
13
14
15
16
17
18
18
19
20
21
22
22
25
26
27
29
29
29
30
31
32
4
6
8
9
i
3-14 DC +5/+12V OUTPUT CONNECTOR.......................................................................
3-15 SERIAL ATA ..............................................................................................................
2
3-16 I C BUS CONNECTOR ............................................................................................
3-17 TV-OUT CONNECTOR ............................................................................................
3-18 FRONT-PANEL .........................................................................................................
CHAPTER 4 INTRODUCTION OF BIOS...................................................................... 35
4-1 ENTER SETUP ..........................................................................................................
4-2 GETTING HELP .........................................................................................................
4-3 THE MAIN MENU .......................................................................................................
4-4 STANDARD CMOS FEATURES ................................................................................
4-5 ADVANCED BIOS FEATURES ..................................................................................
4-6 ADVANCED CHIPSET FEATURES ...........................................................................
4-6-1 DRAM CLOCK / DRIVE CONTROL ........................................................................
4-6-2 AGP & P2P BRIDGE CONTROL .............................................................................
4-7 INTEGRATED PERIPHERALS ..................................................................................
4-7-1 VIA OnCHIP IDE DEVICE .......................................................................................
4-7-2 VIA OnCHIP PCI DEVICE ......................................................................................
4-7-3 SUPER IO DEVICE .................................................................................................
4-8 POWER MANAGEMENT SETUP ..............................................................................
4-8-1 IRQ / EVENT ACTIVITY DETECT ...........................................................................
4-8-1.1 IRQs ACTIVITY MONITORING ............................................................................ 44
4-9 PnP / PCI CONFIGURATION SETUP ........................................................................
4-10 PC HEALTH STATUS ...............................................................................................
4-11 FREQUENCY / VOLTAGE CONTROL .....................................................................
4-12 LOAD FAIL-SAFE / OPTIMIZED DEFAULTS ...........................................................
4-13 SET SUPERVISOR / USER PASSWORD ...............................................................
CHAPTER 5 DRIVER INSTALLATION........................................................................
5-1 VIA 4 IN 1 INSTALL VIA IDE/AGP/INF DRIVER .......................................................
5-2 VGA INSTALL CN700 VGA DRIVER ..........................................................................
5-3 SOUND INSTALL VIA AUDIO CODEC DRIVER FOR VIA
5-4 USB2.0 INSTALL VIA USB2.0 INSTALLING DRIVER................................................
5-5 HOW TO DISABLE ON-BOARD SOUND ..................................................................
5-6 HOW TO UPDATE BIOS ............................................................................................
APPENDIX A: POWER CONSUMPTION TEST................................................................
APPENDIX B: RESOLUTION LIST....................................................................................
WARNING ......................................................................................................................... 58
.....................................
32
33
33
34
34
35
36
36
38
39
40
40
41
41
42
42
43
43
44
45
46
47
47
48
49
51
53
54
55
56
56
57
57
ii
2006
OCT . 26 . 2006
Chapter-1
General lnformation
The CV700A is a Light form factor All-In-One Multimedia control Board. The board design
combines all necessary input and output effects interfaces, which makes itself an ideal
all-in-one control board for Networking Application. The board is designed
with 400 MHz internal bus clock rate architecture.
The CV700A All-In-One motherboard uses VIA CN700 ( CN700 and VT8237R Plus) chipset,
built-in VIA Eden(V4) / C7(V4) EBGA CPU, VGA and Audio feature onboard and supports ,
built-in multi-LAN options . The board is also designed with
AC97 2.1 sound interface which provides an ideal sound adapter in any audio
application. This board offers the superb performance and PC specification in the industry.
The motherboard is fully compatible with industry standards, adding many technical
enhancements, and is fully compatible with thousands of software applications developed
for IBM PC/AT compatible computers. The control logic provides high-speed performance
for the most advanced multiuser, multitasking applications available today.
With DMA33/66/100 and SATA150 access of mode 4 to IDE drive interface architecture,
the IDE interface supports maximum 100 MB/sec ( IDE) and 150 MB/sec (SATA) data
transfer rate to 2 pieces of IDE drive connection and 1 piece of SATA Driver connection.
Compact Flash Reader supports IDE/ ATA interface.
A single Flash chip holds the system BIOS, and you can change the Flash BIOS by the
Utility Update. Advanced IR port also provides a faster data transmission.
CV700A board is designed with CN700 intergrated graphic VGA controller which provides
connection to VGA Monitor . VGA Controller is 128-bit single cycle 2D/3D graphic engine
which supports up to 1600x1200 extended screen resolutions and also real time DVD
MPEG-2 and AC3 playback.
The CV700A Board supports DDR2 RAM memory with one unbuffered double-sided
DIMMs up to 1GB
1
1-1 Major Feature
1. VIA Eden (V4) nano BGA2 500MHz CPU/ VIA C7 nano BGA2 1GHz CPU
2. VIA CN700 chipset (CN700 + VT8237R Plus)
3. One DDR2 400/533 DRAM unbuffered double-sided DIMMs up to 1GB
4. Dual channel master mode PCI support four IDE disk drives DMA 33/66/100 controller
One Channle SATA 150 Connector
5. 400 MHz system clock support
6. Versatile storage device:
* One 50-pin Compact Flash socket
* One 40-pin DOM
* One 2.5" HDD
* One SATA HDD
7. On board CN700 graphic controller integrated graphics
8. On board multi-LAN option*:
* CV700A-3R ----3 x Realtek 8100C 10/100 Mb
* CV700A-3G ----3 x Realtek 8110SC 10/100/1000 Mb
* CV700A-3U ----3 x Intel 82541GI/PI/ER 10/100/1000 Mb
9. Compact Flash Reader Type I/II for IDE/ATA interface
10. Two serial RS232 Ports
11. One enhanced bi-directional parallel ports (SPP/ECP/EPP)
12. On board mini PS/2 Keyboard/Mouse connector
13. On board Sound, AC97 2.1
14. DC 12V-IN Power Adapter support
*The models mentioned above are standard models currently.
The multi-LAN option might change due to customization.
2
1-2 Specification
1.CPU: VIA Eden (V4) nano BGA2 500 MHZ CPU / VIA C7 (V4) nano BGA2 1GHz CPU
2. Cache Memory: Integrated full-speed 128KB L1/L2 cache
3.Chipset: VIA CN700 (North:CN700 ;South:VT8237R Plus)
4. Memory: One DIMM socket up to 1GB DDR2 400/533 DRAM
5. VGA: CN700 integrated graphic controller ; support 128-bit 2D/3D display up to
1600x1200, memory sharable up to 64MB
6. I/O Chipset: VIA VT1211IO
7. IDE: four IDE disk drives; support DMA33/66/100 transfer rate up to 33/66/100 MB/sec
SATA : 1 SATA disk drivers ; support SATA150 MB/sec
8. LAN: * CV700A-3R ----3 x Realtek 8100C 10/100 Mb ( Wake-On-Lan) for LAN1
* CV700A-3G ----3 x Realtek 8110SC 10/100/1000 Mb
* CV700A-3U ----3 x Intel 82541GI/PI/ER 10/100/1000 Mb
9. Storage devices: * One 50-pin Compact Flash socket
* One 40-pin DOM
* One 2.5" HDD
* One SATA HDD
10. Parallel Port: 1 parallel port ; Support SPP/ECP/EPP
11. Serial Port: Two serial ports ; Support RS-232
12. IR: One IrDA TX/RX header
13. USB: Support Six USB ports
14. Keyboard: PS/2 6-pin Mini Din
15. Mouse: PS/2 6-pin Mini Din
16. Sound: AC97 2.1 Sound, full-duplex
17. BIOS: Award BIOS version 6.1
18. Form Factor: LIGHT Board, 200x150mm
19. Power: DC12V-IN power Adapter input
21. Power Voltage: +12V (11.4V to 12.6V)
22. Power Consumption: Please refer to page 57
3
1-3 Hardware Notice Guide
1. Before installing the power supply with this motherboard, please attach the 12V/DC
( 4 pin connector )of the adapter to motherboard first.
After that, plug the adapter power to AC outlet.
Always normally shut down the computer before you move the system unit or remove
the power supply from the motherboard.
Please unplug the 12V/DC ( 4 pin connector ) of the adapter from motherboard first.
Then unplug the adapter from the AC outlet.
Please refer to procedure from the photo 1
2. There will be high possibility to burn out the CPU if you change/ modify any parts of the
CPU cooler.
3. Please wear wrist strap and attach it to a metal part of the system unit before handling a
component.
You can also touch an object that is of ground connection or with metal surface if you don't
have wrist strap.
4. Please be careful when you handle this product. Pay attention to & don't touch the
sharp-pointed components at the bottom PCB .
5. Please pay attention to this: Remove or change any components form the motherboard
will VOID the warranty of the motherboard you purchased .
6. Before you install/remove any components or make any jumper setting on the motherboard,
please make sure to disconnect the power first.
( Please follow the instructions as of this guide )
7. Please only use single sided Mini PCI card, do not use the double sided Mini PCI card
which is not suitable.
8. This does not support 16 bit mini PCI card
9. Please follow this instruction carefully when using the "POWERON after PWR-Fair" function.
When the DC power adaptor runs out of power, unplug it from the DC current;
when power returns plug it back in only after 5 seconds. If there is a power outage,
unplug it from the AC current, when power returns plug it back in only after 30 seconds.
Otherwise it will cause system locking or serious damage.
Remark 1:
Always insert/unplug the 12V/DC ( 4 pin connector ) horizontally & directly from the
motherboard.
DO NOT twist the 12V/DC ( 4 pin connector ) gently, it is designed to fit snugly .
Moreover, erratic pull / push testing with the DC Jack might cause the unpredictable
damage to the component & system unit.
4
Photo 1
Insert
1
2
3
Unplug
1
2
3
5
1-3-1 Installing the Mini PCI card
1. Align the Mini PCI card with the connector at a 45 degree angle.
2. Press the Mini PCI into the connector until you hear a click.
6
Notices:
1.The connectors are designed to ensure the correct insertion. If you feel resistance, check the
connectors & golden finger direction, and realign the card.
2. Make sure the retaining clips (on two sides of the slot) lock onto the notches of
the card firmly.
7
1-3-1.1 Removing the Mini PCI card
1. Release the Mini PCI card by pulling outward the two retaining clips and the card
pops up slightly.
2. Lift the mini PCI card out of its connector carefully.
8
1-4 Packing List*
1 CV700A Board 6 Utility CD Disk
2 DC 12V Power Adapter 7 User's Manual
3 One ATA 100 Flat Cable (2.54mm)
4 One slim IDE port flat Cable (2.00mm)
5 Power Cable
8 SATA DATE Cable (optional)
9 SATA HDD Power Cable (optional)
1
5
6
5
2
3
7
4
8 9
*The packing list above is for the users who purchase single motherboard. The users
who purchase the board with chassis may refer to the packing list in the Assembly Guide.
Please contact with your dealer if any of these items is missing or damaged
on delivery. And please keep all parts of the delivery package with packing
materials in case if you need to deliver or store the product in the future.
9
Chapter-2
Hardware Installation
This chapter provides the information how to install the hardware of CV700A.
Please follow section 1-4, 2-1 and 2-2 to check the delivery package and unpack
carefully. Please follow the jumper setting procedure.
2-1 Unpacking Precaution
The CV700A board has been well packed with an anti-static bag to protect its sensitive
components and circuitry from damage due to static electric discharge.
NOTE!
1. Do not touch the board or any other sensitive components without all necessary
anti-static protection.
2. Please pay attention to the voltage limitation of DC-IN12 V 5 %.
Overuse of DC-IN voltage limitation or change to another power adapter
( not provided with this system ) will VOID warranty.
You should follow these
steps to protect the board from the static electric
discharge whenever you handle the board:
1. Ground yourself by a grounded wrist strap at all times when you handle the CV700A.
Well secure the ALLIGATOR clip of the strap to the end of the shielded wire lead from
a grounded object. Please put on and connect the strap before handling the CV700A
for harmlessly discharge any static electricity through the strap.
+
-
2. Please use anti-static pad to put any components, parts, or tools on the pad whenever
you work on them outside the computer. You may also use the anti-static bag instead of
the pad. Please ask your local supplier for necessary parts on anti-static requirement.
3. Do not plug any connector or set any jumper when the power is on.
10
2-2 Unpacking checkup
First of all, please follow all necessary steps of section 2.1 to protect CV700A
from electricity discharge. With reference to section 1.3, please check the delivery package
again with following steps:
1. Unpack the CV700A board and keep all packing material, manual
and driver disc etc, do not dispose !
2. Is there any components lose or drops from the board? DO NOT CONTINUE
TO INSTALL THIS BOARD!CONTACT THE DEALER YOU PURCHASED THIS
BOARD FROM, IMMEDIATELY.
3. Is there any visible damage on the board? DO NOT CONTINUE TO INSTALL
THIS BOARD!CONTACT THE DEALER YOU PURCHASED THIS
BOARD FROM, IMMEDIATELY.
4. Check your optional parts (i.e. DDR2, CF etc.), all necessary jumpers
setting to jumper pin-set, and CMOS setup correctly.
Please also refer to all information of jumper settings in this manual.
5. Check your external devices (i.e. Add-On-Card, Driver Type etc.)
for complete add-in or connection and CMOS setup correctly.
Please also refer to all information of connector connection in this manual.
6. Please keep all necessary manual and driver disc in a good condition for future
re-installation if you change your Operating System.
11
2-3 Dimension 200x150(mm)
12
2-4 Layout
CN45
CPU FAN JF2
JSW1
JR1
CN4
DC12V IN
JKM1
CN3
CN7 COM1
CN2 VGA
JF1
SYS FAN
CN6 COM2
CN9 LAN2
CN8 LAN3
CN5
CN11
CN10
CN13
CN46
JB1
JI1
LAN3
BATTERY
VT8237R-Plus
CN18 IDE2
EBGA CPU
CN700
CN20
SW1
JP1
PW-LED
JLED1
HDD-LED
LAN-LED
DIMM1
CN16
CN14
CN29
CN26
CN28
JUSB2
JSL1
CN47
JUSB1
CN19 IDE1
13
JCF1
JCF2
CN21
SATA 1
CN27
2-5 Diagram
CN1
DC12V IN
CN5
CN3
CN7 COM1
CPU FAN JF2
JSW1
JR1
SW1
JP1
PW-LED
HDD-LED
LAN-LED
CN10
CN13
JB1
CN2 VGA
JI1
JF1
SYS FAN
CN6 COM2
CN9 LAN2
CN8 LAN3
CN19 IDE1
CN18 IDE2
JCF1
JCF2
CN21
SATA 1
DIMM1
CN16
CN14
CN20
CN28
CN27
CN29
CN47
14
2-5-1 Bottom Side Diagram
. Back Panel (CV700A)
MPCI: Mini PCI Socket
PS/2 Mouse
DC 12V IN
PS/2 Keyboard
RJ45 LAN 1
USB
. Back Panel (CV702A)
RJ45 LAN 1
DC 12V IN
COM 1
COM
Parallel
15
VGA
COM 2
RJ45 LAN 2
RJ45 LAN 3
RJ45 LAN 2
RJ45 LAN 3
Loading...