Integra DPC-5.3 Owner's Manual
DVD Changer
DPC-5.3
Instruction Manual
Contents
Before Using Your DVD Changer 2
Getting Started 6
Facilities and Connections 10
Thank you for purchasing the Integra DVD
Changer.
Please read this manual thoroughly before making
connections and turning on the power.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new DVD Changer.
Please retain this manual for future reference.
Basic Operation 17
Advanced Operation 20
Function Setup 30
Others 37
E
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
Important Safeguards
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
AVIS
OUVRIR
NE PAS
1. Read Instructions – All the safety and operating
instructions should be read before the appliance is operated.
2. Retain Instructions – The safety and operating instructions
should be retained for future reference.
3. Heed Warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions – All operating and use instructions
should be followed.
5. Cleaning – Unplug the appliance from the wall outlet before
cleaning. The appliance should be cleaned only as
recommended by the manufacturer.
6. Attachments – Do not use attachments not recommended by
the appliance manufacturer as they may cause hazards.
7. Water and Moisture – Do not use the appliance near water –
for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and
the like.
8. Accessories – Do not place the appliance on an unstable
cart, stand, tripod, bracket, or table. The appliance may fall,
causing serious injury to a child or adult, and serious damage
to the appliance. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
appliance. Any mounting of the
appliance should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
9. An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the appliance and
cart combination to overturn.
10. Ventilation – Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the appliance
and to protect it from overheating, and these openings must not
be blocked or covered. The openings should never be blocked
by placing the appliance on a bed, sofa, rug, or other similar
surface. The appliance should not be placed in a built-in
installation such as a bookcase or rack unless proper
ventilation is provided. There should be free space of at least
5 cm (2 in.) and an opening behind the appliance.
11. Power Sources – The appliance should be operated only
from the type of power source indicated on the marking label.
If you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company.
12. Grounding or Polarization – The appliance may be
equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
13. Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
2
PORTABLE CART WARNING
S3125A
14. Lightning – For added protection for the appliance during a
lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the appliance due to lightning and power-line
surges.
15. Overloading – Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can result in a risk
of fire or electric shock.
16. Object and Liquid Entry – Never push objects of any kind
into the appliance through openings as they may touch
dangerous voltage points or short-out parts that could result in
a fire or electric shock. Never spill liquid of any kind on the
appliance.
17. Servicing – Do not attempt to service the appliance yourself
as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
18. Damage Requiring Service – Unplug the appliance form
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into the
appliance,
C. If the appliance has been exposed to rain or water,
D. If the appliance does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the appliance to its normal operation,
E. If the appliance has been dropped or damaged in any way,
and
F. When the appliance exhibits a distinct change in
performance – this indicates a need for service.
19. Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
20. Safety Check – Upon completion of any service or repairs to
the appliance, ask the service technician to perform safety
checks to determine that the appliance is in proper operation
condition.
21. Wall or Ceiling Mounting – The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
22. Heat – The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
23. Liquid Hazards – The appliance should not be exposed to
dripping or splashing and no objects filled with liquids, such as
vases should be placed on the appliance.
Precautions
This unit contains a semiconductor laser system and is classified as
a “CLASS 1 LASER PRODUCT”. So, to use this model properly,
read this Instruction Manual carefully. In case of any trouble,
please contact the store where you purchased the unit. To prevent
being exposed to the laser beam, do not try to open the enclosure.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCK FAILED OR DEFEATED. DO NOT STARE
INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS
OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
1. This unit is a CLASS 1 LASER PRODUCT and employs a
laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
The laser is covered by a housing which prevents exposure during
operation or maintenance. However, this product is classified as a
Laser Product by CDRH (Center for Devices and Radiological
Health) which is a department of the Food and Drug
Administration. According to their regulations 21 CFR section
1002.30, all manufactures who sell Laser Products must maintain
records of written communications between the manufacturer,
dealers and customers concerning radiation safety. If you have any
complaints about instructions or explanations affecting the use of
this product, please feel free to write to the address on the back
page of this manual. When you write us, please include the model
number and serial number of your unit.
In compliance with Federal Regulations, the certification,
identification and the period of manufacture are indicated on the
rear panel.
FCC INFORMATION FOR USER
CAUTION:
The user changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
For Canadian model
This class B digital apparatus complies with Canadian ICES-003.
For models having a power cord with a polarized plug:
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle pour les Canadien
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Sur les modèles dont la fiche est polarisee:
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU’AU FOND.
3
Precautions
1. Regional Restriction Codes (Region Number)
Regional restriction codes are built into DVD Changers and
DVD-Video media for each sales region. If the regional code of
the DVD Changer does not match one of the regional codes on
the DVD-Video, playback is not possible.
The regional number can be found on the rear panel of the DVD
Changer.
1
(e.g. for Region 1)
2. About This Manual
This manual explains the basic procedures for operating the
DVD Changer. Some DVD-Video discs do not support the full
potential of the DVD technology. Your DVD Changer may
therefore not respond to all operating commands. Refer to
instruction notes on discs.
” mark may appear on the TV screen during operation. It
A “
means that the operation is not permitted by the DVD Changer
or the disc.
3. Recording Copyright
Recording of copyrighted material for other than personal use
is illegal without permission of the copyright holder.
4. Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION CAREFULLY.
The voltage of the available power supply differs according to
country or region. Be sure that the power supply voltage of the
area where the unit will be used meets the required voltage
(e.g., AC 120 V, 60 Hz) written on the rear panel.
5. Do not touch the unit with wet hands
Do not handle the unit or power cord when your hands are wet
or damp. If water or any other liquid enters the case, take the
unit to an authorized service center for inspection.
6. Location of the unit
• Place the unit in a well-ventilated location.
Take special care to provide plenty of ventilation on all sides
of the unit especially when it is placed in an audio rack. If
ventilation is blocked, the unit may overheat and
malfunction.
• Do not expose the unit to direct sunlight or heating units as
the unit’s internal temperature may rise and shorten the life
of the pickup.
• Avoid damp and dusty places and places directly affected by
vibrations from the speakers. In particular, avoid placing the
unit on or above one of the speakers.
• Be sure the unit is placed in a horizontal position. Never
place it on its side or on a slanted surface as it may
malfunction.
• When you place the unit near a TV, radio, or VCR, the
playback picture may become poor and the sound may be
distorted. In this case, place the unit away from the TV,
radio, or VCR.
7. Care
From time to time you should wipe the front and rear panels
and the cabinet with a soft cloth. For heavier dirt, dampen a
soft cloth in a weak solution of mild detergent and water, wring
it out dry, and wipe off the dirt. Following this, dry
immediately with a clean cloth.
Do not use rough material, thinners, alcohol or other chemical
solvents or cloths since these could damage the finish or
remove the panel lettering.
8. Notes on Handling
• When shipping the unit, use the original shipping carton and
packing materials. For maximum protection, repack the unit
as it was originally packed at the factory.
• Do not use volatile liquids, such as insect spray, near the
unit. Do not leave rubber or plastic products in contact with
the unit for a long time. They will leave marks on the finish.
• The top and rear panels of the unit
a long period of use. This is not a malfunction.
• When the unit is not in use, be sure to remove the disc and
turn off the power.
• If you do not use the unit for a long period, the unit may not
function properly in the future. Turn on and use the unit
occasionally.
9. To Obtain a Clear Picture
The unit is a high technology, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn down, the
picture quality becomes poor. To obtain a clear picture, we
recommend regular inspection and maintenance (cleaning or
parts replacement) every 1,000 hours of use depending on the
operating environment. For details, contact your nearest dealer.
10. Notes on Moisture Condensation
Moisture condensation damages the unit.
Please read the following carefully.
• What is moisture condensation?
Moisture condensation occurs, for example, when you pour a
cold drink into a glass on a warm day. Drops of water form
on the outside of the glass. In the same way, moisture may
condense on the optical pick-up lens inside the unit, one of
the most crucial internal parts of the unit.
• Moisture condensation occurs in the following
cases.
– When you bring the unit directly from a cold place to a
warm place.
– When you use the unit in a room where you just turned on
the heater, or a place where the cold wind from the air
conditioner directly hits the unit.
– In summer, when you use the unit in a hot and humid
place just after you move the unit from an air conditioned
room.
– When you use the unit in a humid place.
• Do not use the unit when moisture condensation
may occur.
If you use the unit in such a situation, it may damage discs
and internal parts. Remove the disc, connect the power cord
of the unit to the wall outlet, turn on the unit, and leave it for
two or three hours. After a few hours, the unit will have
warmed up and evaporated any moisture. Keep the unit
connected to the wall outlet and moisture condensation will
seldom occur.
may become warm after
4
Table of Contents
Important Safeguards / Precautions / Table of Contents............................ 2 - 5
Getting Started
Notes on Discs .................................................................................................... 6
Playable Discs / The Structure of the Disc Content / About Video CDs / MP3 Compatibility Information /
Handling Discs / Cleaning Discs / Storing Discs / Notes on Copyright
Features/Supplied Accessories ......................................................................... 8
Features / Supplied Accessories
Preparing the Remote Controller....................................................................... 9
Inserting the Batteries / Using the Remote Controller
Facilities and Connections
Control Position and Names ............................................................................ 10
Front Panel / Rear Panel / Display / Remote Controller
Making Connections ......................................................................................... 14
Connections to a TV / Optional Video Connections / Optional Audio Connections
Basic Operations
Turning on .......................................................................................................... 17
Connecting the Power
Basic Playback .................................................................................................. 18
Starting Playback / Various Playback
Advanced Operations
Using Banner Display ....................................................................................... 20
Using the On-screen Banner Display / Selecting a Title / Selecting a Chapter or Track / Selecting a
Playback Audio Setting / Changing the Subtitle Language / Changing the Camera Angle / Using
IntroScan Function / Using a Bookmark
Other Operations .............................................................................................. 25
CD Play Function / Random Play / Repeat Play / A-B Repeat Play / Memory Edit Play / Progressive
Scan Function
MP3 Function .................................................................................................... 28
MP3 On-screen Display / Playing Back MP3 / Selecting MP3 Fils / MP3 Repeat Play / MP3 Memory Play
Function Setup
Customizing the Settings ................................................................................. 30
Making Adjustments to Setting / Language Setting / Operation Setting / Picture Setting / Audio Setting
Table of Languages ........................................................................................... 36
Table of Language and Their Code No.
Others
Operating Components not Reached by the Remote Controller Signals
(IR IN/OUT) ...................................................................................................... 37
Troubleshooting ................................................................................................ 38
Specifications .................................................................................................... 39
5
Notes on Discs
This section shows you how to handle, clean, and store discs.
Playable Discs
This DVD Changer can playback the following discs.
Disc mark
DVD-
Video
Video
CD
CD
CD-R*
CD-RW*
* The DVD Changer can play CD-R/RW discs recorded in
CD-DA format, or with MP3 audio files. Some CD-R/RW
discs may not be able to be played back.
• You cannot play discs such as DVD-Audio, DVD-RAM etc., even
if the marks in the above table are labeled on those discs.
• This DVD Changer uses the NTSC color system, and cannot
playback video media recorded in any other color system
(SECAM, etc.).
• Avoid using heart-shaped or octagonal discs. Playing irregularly
shaped discs may damage the internal mechanism of the DVD
Changer.
Contents
Audio
+
Video
(moving
pictures)
Audio +
Video
(moving
pictures)
Audio
Discs with shapes such
as these cannot be
played.
Disc size
12 cm
8 cm
12 cm
8 cm
12 cm
8 cm (CD single)
The Structure of the Disc Content
DVD-Video
Normally, the contents of DVD-Video are divided into titles, and the
titles are subdivided into chapters.
Title 1
Chapter 1
Video CD/CD
Video CD and CD are divided into tracks.
Track 1 Track 2
Chapter 2
Chapter 1
Track 3
Title 2
Chapter 2
Track 4 Track 5
Chapter 3
About Video CDs
This DVD Changer supports Video CDs equipped with the PBC
(Version 2.0) function. (PBC is the abbreviation of Playback
Control.) You can enjoy two playback variations depending on the
type of disc.
• Video CD not equipped with PBC function (Version 1.1)
Sound and movies can be played on this DVD Changer in the same
way as a CD.
• Video CD equipped with PBC function (Version 2.0)
In addition to operation of the Video CD not equipped with the
PBC function, you can enjoy playback with interactive software
and search function using the menu displayed on the TV screen
(Menu Playback). Some of the functions described in this
Instruction Manual may not work with some discs.
• Do not use discs that have residue from adhesive tape, rental discs
that have peeling labels, or discs that have custom labels or
stickers. Otherwise, you may not be able to eject the discs or the
DVD Changer may become inoperative.
• Use CD-R or CD-RW media for recording your CD audio files or
MP3 files. The disc must be finalized in order to play.
6
MP3 Compatibility Information
• This system is not compatible with mult-session discs.
If you try a multi-session disc, only the first session will
be played.
• The CD-R or CD-RW must be ISO 9660 level 1 compatible.
• Files should be MPEG1 Audio Layer 3 format, 32 kHz, 44.1 kHz
(recomended) or 48 kHz, 32 kbps - 320 kbps (128 kbps
recomended). Incompatible files will not play.
• This system only plays tracks that are named with the file
extension “.mp3” or “.MP3”.
Notes on Discs
Handling Discs
• Do not touch the playback side of the disc.
Playback side
• Do not attach paper or tape to discs.
Cleaning Discs
• Fingerprints and dust on the disc cause picture and sound
deterioration. Wipe the disc from the center outwards with a soft
cloth. Always keep the disc clean.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable,
play in public, and rent copyrighted material without permission.
The video recorded on DVD-Video is copy protected, and any
recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
• If you cannot wipe off the dust with a soft cloth, wipe the disc
lightly with a slightly moistened soft cloth and finish with a dry
cloth.
• Do not use any type of solvent such as thinner, benzine,
commercially available cleaners or antistatic spray for vinyl LPs.
It may damage the disc.
Storing Discs
• Do not store discs in a place subject to direct sunlight or near heat
sources.
• Do not store discs in places subject to moisture and dust such as a
bathroom or near a humidifier.
• Store discs vertically in a case. Stacking or placing objects on
discs outside of their case may cause warping.
7
Features/Supplied Accessories
Features
● Plays DVD-Video Discs, Video CDs, CDs
● 10-bit Video DAC
● Simultaneous outputs to all video connections
● Digital Outputs pass DTS®*1, Dolby®*2 Digital and PCM Signals
● Built-In Dolby® Digital decoder
● Full-function remote controller
● Direct Digital path
● Plays 5 Discs
● CD-R and CD-RW playable
● Plays MP3
● CD Play function for audiophile
● Pass 96 kHz PCM digital stream
● RS 232 interface for system control
● Progressive Scan
● VLSC (Vector Linear Shaping Circuitry)
Supplied Accessories
Make sure your box contains everything listed below.
The number of accessories is indicated in brackets [ ].
*1“DTS” and “DTS Digital Out” are trademarks of Digital Theater
Systems, Inc.
*2Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Remote controller (RC-503DV) [1]
Audio/video cable [1]
8
Power cord [1]
Batteries (size AAA/R3) [2]
Preparing the Remote Controller
Inserting the Batteries
1 Remove the battery compartment cover by
pressing the tab and lifting up the cover.
2 Insert the two batteries (size AAA/R3).
Be sure to match the + and – ends of the batteries
with the diagram inside the battery compartment.
3 Replace the battery compartment cover.
Using the Remote Controller
Point the remote controller toward the remote control sensor.
Remote control sensor
30˚
30˚
Approx. 16 feet
Notes
• Place the unit away from strong light such as direct sunlight or inverted
fluorescent light which can prevent proper operation of the remote
controller.
• Using another remote controller of the same type in the same room or using
the unit near equipment which uses infrared rays may cause operational
interference.
• Do not put any object such as a book on the remote controller. The buttons
of the remote controller may be pressed by mistake and drain the batteries.
• Make sure the audio rack doors do not have colored glass. Placing the unit
behind such doors may prevent proper remote controller operation.
• If there is any obstacle between the remote controller and the remote
control sensor, the remote controller will not operate.
Notes
• Do not mix new batteries with old batteries or different kinds of
batteries.
• To avoid corrosion, remove the batteries if the remote controller
is not to be used for a long time.
• Remove dead batteries immediately to avoid damage from
corrosion. If the remote controller does not operate smoothly,
replace both batteries at the same time.
• The life of the batteries supplied is about six months but this
will vary depending on usage.
9
Control Position and Names
Front Panel
For operational instructions, see the page indicated in brackets [ ].
1
23 4 5 6 789
DPC-5.3
-=
0
1 Power button [17]
Turns on the main power supply.
2 Standby indicator [17]
Lights in the standby mode.
3 Standby/On button [17]
Toggle for standby on and off.
4 CD Play button [25]
Press to use the DVD Changer as CD player.
5 Display [12]
6 Disc Skip button [18]
Press to select a disc. When the Disc Skip button is pressed
while the disc tray open, the tray simply rotates.
7 4/¢ buttons [19]
Allow you to move to the previous chapter or track / the next
chapter or track on a disc.
8 Stop 7 button [18]
Stops playing a disc. When disc is playing, if you press 7 and
£, the disc will start resume play. When 7 is pressed again
during stop mode, the resume function is canceled.
9 Play/Pause £/8 button [18]
Begins to play disc (close disc tray first if it is open.)
Temporarily stops playback when a disc is playing. Press this
button again for normal playback.
0 Disc 1-5 buttons [18]
Press to select a disc.
- Disc tray [18]
= Open/Close button [18]
Press to open or close the disc tray.
10
Control Position and Names
Rear Panel
For operational instructions, see the page indicated in brackets [ ].
AC INLET
IR
IN
VIDEO OUTPUT
RS 232
COMPONENT
P
R
P
B
Y
S
VIDEO
VIDEO
AUDIO
OUTPUT
L
R
2134567 98
1 RS 232 port
This port is to be used in conjunction with an external controller
to control the operation of the DPC-5.3 using an external device.
2
VIDEO OUTPUT COMPONENT (PR/PB/Y) jacks [15]
If your TV has component inputs, you can connect a component
video cable to your TV and to your DVD Changer for ideal
video quality. The component video cable only carries the video
signal; remember to connect the left and right audio cables.
If you connect a TV that is compatible with a Progressive scan
signal, you can enjoy both Interlaced and Progressive scan.
3 VIDEO OUTPUT S VIDEO jack [15]
If your TV has a S-Video jack, you can connect an S-Video
cable to your TV and to your DVD Changer for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
4 VIDEO OUTPUT VIDEO jack [14]
Connect a video cable to this jack and to the Video Input jack on
your TV.
DIGITAL OUTPUT
OPTICAL
COAXIAL
OUT
DVD CHANGER
MODEL NO.
DPC-5.3
5 AUDIO OUTPUT jacks [14, 16]
Insert audio cables (left and rights) to these jacks on your DVD
Changer and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
6 DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable to connect your DVD Changer to an AV
component that features digital input capability. If the
component has a Dobly Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
7 DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable to connect your DVD Changer to an AV
component that features digital input capability. If the
component has a Dobly Digital or DTS decoder, you can enjoy
theater-quality multichannel sound.
8 IR IN/OUT jacks [37]
If the DPC-5.3 is located inside a rack or cabinet that will not
allow infrared beams to reach the IR sensor, you will need to
connect a remote sensor to IR IN jack to be able to use the
remote controller. Then install the remote sensor in an
unblocked location where you can easily point the remote
controller.
Using a mini-jack connector, connect IR emitter to the IR OUT
jack on the DPC-5.3 and then place the IR emitter on the remote
sensor of the component or facing it. Refer to page 37.
9 AC INLET [17]
Use to connect the power cord to the wall outlet.
11
CD
TRACK MIN
SEC
Control Position and Names
Display
1234657 8 90 =
!~@
1 Inserted disc indicators
Indicate the type of current disc that is loaded.
2 PROGRESSIVE indicator
Illuminate when the DVD Changer is set to progressive mode.
3 Parental Lock indicator
Illuminates in parental lock mode.
4 TITLE indicator
Illuminates to indicate the current title number.
5 RESUME indicator
Illuminates when the player is ready for resume playback.
6 CHAPTER/TRACK indicators
Indicate display mode of the current chapter of DVD disc or
track number of Video CD or CD.
7 RANDOM indicator
Illuminates during random playback.
8 REPEAT indicators
Illuminate during repeat playback.
9 MEM. indicator
Illuminates during memory playback.
0 PBC indicator
Illuminates when PBC is on for Video CD.
-
■ Display Examples
During DVD-Video playback:
DVD
Playing
disc 1
Notes
• Some discs may not display chapter numbers.
• A time indication not accompanied with a chapter number shows elapsed
time of a segment within the current time.
During Video CD playback:
VCD
Playing
disc 1
Note
Some discs may not display track numbers or elapsed time.
During CD playback:
TITLE CHAPTER MIN
Playing chapter
3 of title 2
TRACK MIN
Playing
track 3
SEC
Elapsed time of
the current title
SEC
Elapsed time of
the current track
- INTRO indicator
Illuminates during intro-scan playback.
= Time indicators
Indicate playing time.
~ Play/Pause indicators
Illuminate in play or pause mode.
! Disc number indicator/CD indicator
Disc number indicators indicate the presence of a disc. CD
indicator illuminates when the DVD Changer is in CD Play
mode.
@ Multifunction indicator
Indicates operating status, messages, etc.
12
Playing
disc 1
During MP3 playback:
DVD
MP3
Playing
disc 1
Playing
track 3
TITLE CHAPTERTRACK MIN
Playing track 105
of forlder 6
Elapsed time of
the current track
SEC
Elapsed time of
the current track
Notes
• If the track is within a folder, the folder number is displayed. For tracks
outside a folder, no folder number is displayed.
• Track number is consecutive.
Loading...