Insignia NS-PNM6103-BK, NS-PNM6103-BK-C Quick Setup Guide

Quick Setup Guide | NS-PNM6103-BK/NS-PNM6103-BK-C

Bluetooth Mouse

PACKAGE CONTENTS

• Bluetooth mouse

• AA battery (1)

• Quick Setup Guide

SYSTEM REQUIREMENTS

• Windows® 10, Windows®8.1, Windows®8, Windows®7, or Mac OS 10.x or higher

• Built-in Bluetooth function or Bluetooth receiver

FEATURES

LED

indicator

Before using your new product, please read these instructions to prevent any damage.

On/o switch

CONNECT button

MOUSE FEATURES INSTALLING THE BATTERY AND CONNECTING THE

FUNCTION

LED indicator

CONNECT button

DESCRIPTION

• Lights for three seconds when you turn on your mouse.

• Blinks two times per second when your mouse is in pairing mode.

• Turns o immediately when pairing is complete.

• Blinks every ve seconds when the battery is low; becomes more rapid when power is almost gone.

Press to put your mouse in pairing mode.

MOUSE

1 Open the battery compartment and insert one AA battery (included).

Make sure that you match the + and – symbols in the battery compartment.

2 Press the CONNECT button on the bottom of the mouse. The LED

indicator blinks twice to indicate your mouse is in pairing mode.

3 Pair your mouse to your computer. PC: 1 Click the Bluetooth icon in your computer’s taskbar. 2 Click Add a Bluetooth device. Your computer searches for your

mouse.

3 Double-click Bluetooth 3.0 Mouse.

Mac: 1 Open System Preferences in the dock.

2 Click the Bluetooth icon. 3 Click + in the lower-left corner. Your computer searches for your mouse. 4 Double-click Bluetooth 3.0 Mouse.

Note: If your computer has never connected to a Bluetooth device, click Set

Up New Device to pair your mouse to your computer.

When pairing is complete, the LED indicator lights for two seconds.

TURNING YOUR MOUSE ON AND OFF

1 The rst time you use your mouse, turn it on by moving the on/o

switch on the bottom of the mouse to the on position.

2 If you don’t use your mouse for ve minutes, it switches to standby

mode to conserve the battery. To wake up your mouse, press any button or move it.

UNPAIRING THE MOUSE FROM YOUR PC OR MAC

PC: 1 Click the Bluetooth icon on your task bar. 2 Click Show Bluetooth Devices. 3 Right-click (Win 7) or click (Win 8) Bluetooth 3.0 Mouse. 4 Click Remove Device to un-pair the mouse. Mac: 1 Open System Preferences in the dock. 2 Click the Bluetooth icon . 3 Click the - in the left-lower corner. 4 When it asks Are you sure you want to remove this device?, click

Remove to un-pair the mouse.

CLEANING YOUR MOUSE

• Wipe the mouse with a damp, lint-free cloth.

SPECIFICATIONS

Mouse:

• Dimension (L × W × H): 3.93 × 2.51 × 1.45 in. (10 × 6.4 × 3.7 cm)

• Weight: 2.05 oz. (.058 kg)(without battery)

• Battery: 1 AA alkaline battery

• Battery life: 3 months (based on two hours moving per day)

• Rating: 1.5V DC - 20mA

TROUBLESHOOTING

My mouse is not working.

• Move your mouse closer to your computer.

• Make sure that your computer meets the system requirements.

• Make sure that your mouse is paired by pressing the blue CONNECT button on the bottom of your mouse, then pair it with your computer.

• Make sure that the Bluetooth function on your computer or your Bluetooth receiver is working.

• Un-pair your mouse from your computer, then re-pair it.

• If the LED indicator on your mouse is blinking every ve seconds, replace the battery.

LEGAL NOTICES

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RSS-Gen and RSS-210 statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

RSS-102 statement

This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.

ONEYEAR LIMITED WARRANTY

For complete warranty, visit www.insigniaproducts.com.

CONTACT INSIGNIA

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

Made in China

V4 ENGLISH 15-0829