Insignia NS-PNM5113, NS-PNM5113-C User Manual
Quick Setup Guide
USB Optical Mouse with Retractable Cord | NS-PNM5113/NS-PNM5113-C
Package contents
• Retractable Wired USB Mouse
• Quick Setup Guide
System requirements
• Windows® 8, Windows® 7, Windows Vista®, Windows® XP, or
Mac OS 10.X or higher
• One available USB port
Features
Right button
Scroll wheel
Retractable USB cord
(cord shown stowed)
Left button
Setting up your mouse
1 Turn the mouse over and hold it in one hand, then pull out the USB
cord to the desired length.
2 Plug your mouse into an available USB port on your computer. The
computer automatically detects the mouse and you can immediately
begin using it.
Caution: Using your mouse on a desk that is red, transparent, or highly
reflective may interfere with the mouse’s optical sensor.
To retract the USB cord
• Slightly pull out the USB cord and the cord automatically rewinds.
Note: To prevent damaging the reel, hold onto the cord and guide it
back into the mouse.
Before using your new product, please read these instructions to prevent any damage.
Cleaning your mouse
• Wipe the mouse with a damp, lint-free cloth.
IC Statement
CAN ICES-3 (B)/NMB-3 (B)
Specications
Dimension (L×W×H): 3.8 × 2.31 × 1.3 in. (9.8 × 5.8 × 3.5 cm)
Weight: 2.1 oz. (.06 kg)
USB speed: USB 2.0, 480Mbps
Cable length: 29.5 in. (75 cm)
Troubleshooting
My mouse is not working.
• Try connecting your mouse to a dierent USB port on your computer.
• Make sure that your computer meets the system requirements.
• Only use the mouse on a clean, at, non-slippery surface to ensure
smooth and accurate cursor action.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
One-year limited warranty
For complete warranty, visit www.insigniaproducts.com.
Contact Insignia
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 14-0239
Loading...