Congratulations on your purchase of a
high-quality Insignia product. Your new digital
picture frame represents the state of the art in
digital picture frame design and is designed
for reliable and trouble-free performance.
Always follow these basic safety precautions when using
your digital picture frame. This will reduce the risk of fire,
electric shock, and injury.
Warnings
To reduce the risk of fire or shock hazard, do not
expose the frame to rain or moisture and unplug
the digital picture frame during lightning storms.
To prevent the risk of electric shock, do not
remove the cover. There are no user-serviceable
parts inside. Refer all servicing to qualified
personnel.
There is a risk of explosion if the battery is
incorrectly replaced. Replace only with the same
or equivalent type of battery.
Placement—To prevent fire or electric shock, do not
expose this digital picture frame to rain or moisture. To
prevent it from falling do not place it on an unstable cart,
stand, tripod, bracket, or table. Keep the unit away from
strong magnets, heat sources, direct sunlight, and
excessive dust.
Installation—Make sure that the digital picture frame is
used in accordance with the instructions and illustrations
provided in this manual.
Objects and liquids—Do not push objects of any kind into
the digital picture frame through openings. Do not spill or
spray liquid of any kind on or in the digital picture frame
(this may result in a fire or electric shock). Do not place
anything heavy on the unit. To ensure proper ventilation
and proper operation, never cover or block the slots and
openings with a cloth or other material.
Disassembly—Do not attempt to disassemble the frame.
There is a risk of electric shock. Contact qualified service
personnel if your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning, make
sure the frame is unplugged from the power source. Use
only cleaners specifically designed to clean LCD panels,
or a cloth slightly dampened with water for cleaning the
exterior of the frame only.
Features
•Displays digital pictures (JPG/JPEG format) and
digital slideshows without a computer.
•Plays music (MP3 or WAV formats) alone or with
a picture slideshow.
•Display pictures directly from a memory card or
USB drive (not included).
•Bright, clear TFT LCD screen.
•Compatible with a wide variety of memory cards,
including SD, MMC, MS, CF, and xD.
•Compatible with USB flash drives.
•Multi-image mode displays multiple pictures at
the same time in a slideshow.
•On-frame button controls and infrared remote
control.
You can use most of the frame’s features by using either
the buttons on top of the frame or by using the remote
control. Selecting files for copying, deleting, or viewing
requires the remote control, and the instructions in this
guide refer to remote control buttons (except where
noted).
#ButtonDescription
1MENUPress to open the Setup menu.
2Left arrowPress to move the menu selection left or to
3Right arrow Press to move the menu selection right or to
•Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will not
work until it is removed.
4 Slide the Power On/Off switch to the ON position
to turn on the frame. The INSIGNIA logo is displayed
for several seconds, then the frame automatically
shows the picture stored in internal memory (when
no memory card is present). If a memory card is
present, the frame shows the picture stored on the
memory card.
To play a slideshow from a memory card
or internal memory - automatic playback:
Insert a memory card or USB device into one of the
1
available memory slots or the USB port. A slideshow
of pictures from the memory card or USB device
automatically starts to play.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a
slot. The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 39.
2 Press (ENTER/PLAY/PAUSE) to pause the
slideshow on a particular picture. Press
(ENTER/PLAY/PAUSE) again to resume the
slideshow.
To play a slideshow from a memory card
or internal memory - manual playback (to
start the slideshow from a specific picture
or file):
1
Insert a memory card (or USB drive) into one of the
available memory slots or the USB port. A slideshow
of pictures from the memory card or USB device
automatically starts to play.
www.insignia-products.com
13
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.