User Guide
8" Digital Picture Frame
NS- DPF0812W
8" Digital Picture Frame
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up your picture frame. . . . . . . . . . . . . . . . . . . . 10
Using your picture frame . . . . . . . . . . . . . . . . . . . . . . . . 12
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6-month limited warranty. . . . . . . . . . . . . . . . . . . . . . . 32
Introduction
Congratulations on your purchase of a high-quality Insignia
product. Your new digital picture frame is designed for
reliable and trouble-free performance.
2
www.insigniaproducts.com
8" Digital Picture Frame
Safety information
Always follow these basic safety precautions when using
your digital picture frame. This will reduce the risk of fire,
electric shock, and injury.
Warn ings
To reduce the risk of fire or shock hazard, do not expose
the frame to rain or moisture and unplug the frame during
lightning storms.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery.
Placement—To prevent fire or electric shock, do not
expose this digital picture frame to rain or moisture. To
prevent it from falling do not place it on an unstable cart,
stand, tripod, bracket, or table. Keep the unit away from
strong magnets, heat sources, direct sunlight, and excessive
dust.
Installation—Make sure that the digital picture frame is
used in accordance with the instructions and illustrations
provided in this manual.
Objects and liquids—Do not push objects of any kind
into the digital picture frame through openings. Do not spill
or spray liquid of any kind on or in the digital picture frame
(this may result in a fire or electric shock). Do not place
anything heavy on the unit. To ensure proper ventilation and
proper operation, never cover or block the slots and
openings with a cloth or other material.
Disassembly—Do not attempt to disassemble the frame.
There is a risk of electric shock. Contact qualified service
personnel if your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning,
make sure the frame is unplugged from the power source.
Use the supplied cleaning cloth, or a cloth slightly
dampened with water, for cleaning the exterior of the frame
only.
www.insigniaproducts.com
3
Features
NS- DPF0812W
• Displays digital pictures (JPEG format) and picture
slideshows without a computer
• Displays pictures directly from a portable memory
device (not included)
• Bright, clear TFT LCD screen
• Compatible with a wide variety of memory cards,
including:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•Memory Stick®
• Memory Stick Pro Duo™ (requires an adapter -
not included)
•xD™
• microSD™ (requires an adapter - not included)
• Compatible with USB flash drives
• Mini-USB port to connect the digital picture frame
to your PC
• Multi-image mode displays multiple pictures at the
same time in a slideshow
• Auto Rotate–pictures are rotated based on your
photos’ embedded EXIF data
Note
EXIF (Exchangeable Image File) data
is information stored by a digital
photo camera as it records a photo.
This information includes what
orientation the camera is in when a
photo is captured.
• On-frame button controls and infrared remote
control
• 2 GB internal memory
4
www.insigniaproducts.com
8" Digital Picture Frame
Package contents
• Digital picture frame
• AC power adapter
•USB cable
•User Guide
•Quick Setup Guide
• Remote control with battery (CR2025)
•Cleaning cloth
Back
Model: NS-DPF0812W
Power: 5VDC, 1.0A (5W)
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
Manufactured for Insignia Products
7601 Penn Avenue South
Portrait
Richfield MN USA 55423
THIS CLASS (B) DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE (B) EST
CONFORME À LA NORME NMB-003 DU CANADA.
Made in China
#Description
1Adjustable stand
2Power On/Off switch
Landscape
www.insigniaproducts.com
5
Sides
#Description
1 Memory card slot, supports:
2USB (type A) port
3 Remote control slot
4Mini USB port
5 DC 5 V power connector
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•Memory Stick®
• Memory Stick Pro Duo™ (adapter required - not
included)
•xD™
• microSD™ (adapter required - not included)
NS- DPF0812W
REMOTE
DC 5V IN
6
www.insigniaproducts.com
8" Digital Picture Frame
Top (b ut to ns )
You can access most of the frame’s features by using either
the buttons on top of the frame or by using the remote
control. Selecting files for copying or deleting requires the
remote control, and the instructions in this guide refer to
remote control buttons (except where noted).
/
#Button Description
1 MENU/ To open the menu, quickly press and release.
2 (left) Press to move the menu selection left or to
3 (right) Press to move the menu selection right or to
4 ENTER/ Press to select menu items. During a slideshow,
5 (up) Press to navigate up.
6 (down) Press to navigate down.
To enter Standy mode, press and hold for two
seconds.
display the previous picture.
display the next picture.
press to pause or resume.
7 BACK Go back to previous selection or screen.
www.insigniaproducts.com
7
Remote control
NS- DPF0812W
RM-NSDPF0812W
DISPLAY
Digital Picture Frame
ZOOM
MENU
TM
# Button Description
1 DISPLAY Press to toggle the multi-image
2 X SLIDESHOW Press to start a slideshow.
3 S (Up) Press to move the selection up.
4 /ENTER Press to select the highlighted option
display mode.
or to pause and resume the slideshow.
8
www.insigniaproducts.com
8" Digital Picture Frame
# Button Description
5 W (Left) PREV Press to move the menu selection left,
6 T (Down) Press to move the menu selection
7 BACK Press to go back a screen.
8 ZOOM Press to magnify the picture.
9 MENU Press to display the Setup menu.
display the previous picture, or select
the previous file.
down.
10 (thumbnail/folder) Press to enter Thumbnail mode, or to
11 X (Right) NEXT Press to move the menu selection
12 INFO Press to display information about the
13 SELECT Press to select a picture or file to copy
14 DEL/COPY When reviewing pictures from
15 ROTATE Press to rotate the picture.
display files and folders.
rig ht, dis play th e next pictu re, or sele ct
the next file.
picture.
or delete.
internal memory, press to delete
selected pictures.
When reviewing pictures from an
external, portable memory device,
press to copy selected pictures.
Note: Pressing this button does not
delete photos on the portable
memory device.
When you are in a thumbnail view, you
can press this button to start a
slideshow.
www.insigniaproducts.com
9
NS- DPF0812W
Setting up your picture frame
Setting up the remote control
To set up the remote control:
• Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will not
work until it is removed.
10
ZOOM
Digital Picture Frame
RM-NSDPF0812W
MENU
TM
DISPLAY
www.insigniaproducts.com
8" Digital Picture Frame
Setting up the frame
To set up the frame:
Pull out the stand to set the frame in landscape
1
orientation.
2 Turn the stand counterclockwise 90° to set the frame in
portrait orientation.
Model: NS-DPF0812W
Power: 5VDC, 1.0A (5W)
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
Manufactured for Insignia Products
7601 Penn Avenue South
Richfield MN USA 55423
THIS CLASS (B) DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE (B) EST
CONFORME À LA NORME NMB-003 DU CANADA.
Made in China
Landspace
Portrait
Model: NS-DPF0812W
Power: 5VDC, 1.0A (5W)
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
Manufactured for Insignia Products
7601 Penn Avenue South
Richfield MN USA 55423
THIS CLASS (B) DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE (B) EST
CONFORME À LA NORME NMB-003 DU CANADA.
Made in China
Landspace
Portrait
3 Plug the AC power adapter into the frame’s DC power
connector and into an AC power outlet.
www.insigniaproducts.com
11
4 Extend the stand from the back of the frame, then place
the frame on a flat surface. Push or pull the stand to
adjust the viewing angle.
5 Slide the power switch to the ON position. The frame
automatically turns on and starts playing a slideshow of
the pictures store d in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control
at the front of the frame and press ENTER.
Using your picture frame
Tip
You can also disable and re -enable Demo mode
from the Setup menu. For instructions, see
“Setup options” on page 25.
You can use your digital picture frame to:
• Play a slideshow of pictures
• Adjust a picture’s view
• Change display settings
NS- DPF0812W
12
www.insigniaproducts.com
8" Digital Picture Frame
Playing slideshows
To play an instant slideshow from a portable
memory device:
Insert a portable memory device into one of the
1
available memory slots or the USB port.
A slideshow of pictures from the portable memory
device automatically starts to play.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a slot.
The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 30.
2 Press ENTER/ to pause the slideshow on a
particular picture. Press ENTER/ again to resume
the slideshow.
www.insigniaproducts.com
13
NS- DPF0812W
To manually play a slideshow from a portable
memory device or from internal memory:
If the pictures you want to use are on a portable
1
memory device, insert the device into one of the
available memory slots or the USB port. A slideshow of
pictures from the portable memory device
automatically starts to play.
2 Press (BACK) repeatedly until the Home menu
opens.
3 Press W or X to select a portable memory device or
internal memory.
Note
The option to select a portable memory device is
disabled if there is no device of that type in the
corresponding slot or port.
4 Press X SLIDESHOW. A slideshow begins that displays
the pictures contained in the portable memory device
or internal memory.
14
Tip
Press DISPLAY during a slideshow to switch to
multi-image slideshow mode. Press DISPLAY
again to return to single-image display mode.
www.insigniaproducts.com
8" Digital Picture Frame
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from a portable memory device to the frame’s
internal memory.
Notes
Using the frame alone, you cannot copy pictures
from the internal memory to a portable memory
device, and you cannot copy pictures from one
portable memory device to another.
Because you cannot copy pictures back from the
frame to a portable memory device using the
frame, the frame should not be considered your
primary picture storage method. Make sure that
you have the pictures stored elsewhere (such as a
memory card).
To copy selected pictures from a portable
memory device:
Press (BACK) repeatedly until the Home screen
1
opens.
www.insigniaproducts.com
15
NS- DPF0812W
2 Press W or X to highlight the portable memory device
you want to copy from, then press ENTER/ . The
Thumbnail screen opens.
Tip
You can press (thumbnail/file list) to switch
between thumbnail mode and file list mode.
Thumbnail mode displays all files in the selected
portable memory device, and file list mode
displays files and folders.
3 Press W or X to highlight each picture you want to copy,
then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to copy.
16
4 Press DEL/COPY, then press S or T to
select Copy Selected (to copy the pictures you select)
or Copy All (to copy all pictures).
www.insigniaproducts.com
8" Digital Picture Frame
5 Press X, press S or T to select Yes, then press
ENTER/ . The pictures are copied.
To copy pictures from your computer to
internal memory or portable memory device:
Make sure that your computer has been started before
1
you begin.
2 Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3 Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory devices appear as “removable
disks.” Each memory area appears as a separate
removable disk.
On a Mac computer, the frame’s internal memory or an
external, a portable memory device appears as a USB
drive.
4 Use your computer's standard drag and drop or copy
and paste procedures to move pictures on your
computer to the frame's internal memory or the
portable memory device.
To copy pictures from your internal memory
or external portable memory device to your
computer:
Make sure that your computer has been started before
1
you begin.
2 Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3 Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory device appear as “removable
disks.” Each memory area appears as a separate
removable disk.
www.insigniaproducts.com
17
NS- DPF0812W
On a Mac computer, the frame’s internal memory or a
portable memory device appears as a USB drive.
4 Use your computer's standard drag and drop or copy
and paste procedures to move pictures from the frame's
internal memory or portable memory device to your
computer.
Deleting pictures from internal memory
Caution
Because you cannot copy pictures back from the
frame to a portable memory device, the frame
should not be considered your primary picture
storage method. Make sure that you have the
pictures stored elsewhere (such as a memory
card).
To delete pictures from internal memory:
Press (BACK) until the Home screen opens.
1
18
www.insigniaproducts.com
8" Digital Picture Frame
2 Press W or X to highlight Internal Memory, then press
ENTER/ . The Thumbnail screen opens.
3 Press W/X/S/T to highlight each picture you want to
delete, then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to delete.
4 Press DEL/COPY, then press S or T to
select Delete Selected (to delete only the pictures you
select) or Delete All (to delete all pictures in memory).
5 Press X to open the submenu, press S or T to select
Yes , then press ENTER/ . The pictures are deleted.
www.insigniaproducts.com
19
NS- DPF0812W
To delete pictures with your PC:
Make sure that your computer is on before you begin.
1
2 Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, and connect
the other end to an available USB port on your
computer.
3 Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any portable memory card devices appear as
“removable disks.” Each memory area appears as a
separate removable disk.
On a Mac computer, the frame’s internal memory or an
portable memory device appears as a USB drive.
4 Find and highlight the pictures you want to delete, then
use your computer's standard procedures to delete
pictures from the frame's internal memory or a portable
memory device.
20
www.insigniaproducts.com
8" Digital Picture Frame
Customizing slideshows
You can set up a slideshow using either all of the pictures or
selected pictures.
To set up a slideshow of selected pictures:
Tip
A slideshow of selected pictures can only be
set up by using the remote control.
Press (thumbnails).
1
- OR If a slideshow is in progress, press (BACK) to
access the thumbnail screen. The Thumbnails screen
opens.
www.insigniaproducts.com
21
NS- DPF0812W
2 Press W or X to highlight the picture you want to
include in the slideshow, then press SELECT. A
check mark appears at the upper-right corner of the
thumbnail.
3 Repeat until all pictures you want to add to the
slideshow are selected.
4 Press DEL/COPY, then press S or T to
select Play Selected.
5 Press X to open the submenu, press S or T to select
Yes , then press ENTER/ . A slideshow of the
selected pictures is played.
6 To end the slideshow and clear the selected items, press
(BACK). This returns you to the Thumbnail
screen. From there, you may select a photo to view or
begin another slideshow.
Customizing the picture display
You can rotate, magnify, and display information about any
picture that the frame displays.
22
To rotate a picture:
1 While a picture is displayed full screen (not as a
thumbnail), press ROTATE. The picture is rotated
90° clockwise with each press of the button.
2 Press ENTER/ to continue the slideshow.
www.insigniaproducts.com
8" Digital Picture Frame
To rotate a picture based on orientation:
Press MENU, then press T Frame Orientation.
1
2 Press W or X to select Landscape or Portrait. Pictures
are rotated based on the Frame Orientation setting.
3 While a picture is displayed full screen (not as a
thumbnail), use the adjustable stand to set the frame in
landscape orientation or turn the stand
counter-clockwise by 90° to set the frame in the portrait
orientation.
To magnify a picture:
While a picture is displayed full screen (not a thumbnail),
1
press (ZOOM). The picture is magnified in size each
time you press the button (there are three zoom levels),
until it returns to the normal size.
Tip
While the picture is magnified, press the arrow
buttons to pan the picture so you can see the
different parts that are off the screen.
2 Press ENTER/ to continue the slideshow. The next
picture is displayed at normal size.
www.insigniaproducts.com
23
Setting viewing options
You can change all of the viewing options in the Setup menu
using the buttons on the top of the frame or on the remote
control. You can display the Setup menu at any time by
pressing MENU. Only the available setup options are
displayed for each menu.
To set viewing options:
Press (BACK) until the Home screen opens.
1
2 Press the arrow buttons to highlight the SETUP icon,
then press ENTER/ . The Setup menu opens.
3 Press S or T to highlight a display option, then press
ENTER/ to select the option. A second menu
opens, listing the available settings. A square icon ( )
to the right of an option shows the current setting.
4 Press S or T to highlight a setting, then press
ENTER/ to select the setting.
5 When you are finished, press (BACK) to close the
Setup menu and return to the previous screen.
NS- DPF0812W
24
www.insigniaproducts.com
8" Digital Picture Frame
Setup options
The following table lists and describes Setup menu options:
Menu
option
Slideshow
Settings
Settings Description
Slideshow interval
•5 Seconds
• 10 Seconds
• 30 Seconds
• 60 Seconds
• 60 Minutes
• 24 Hours
Slideshow transition
•Normal
•Random
•Fade
•Curtain
Left-Right
•Curtain
Top-Bottom
•Open-Door
•Cross-Comb
•Cross-Fade
Slideshow shuffle
•On
•Off
Date/Time stamp
•On
•Off
Color Enhancement
•On
•Off
Sets the interval between each
picture transition in a
slideshow.
Sets the special effects used to
transition from one picture to
the next in a slideshow.
The Normal setting plays
slideshows without any
special transition effects.
The Random setting cycles
through the available special
transition effects during
slideshows.
Displays pictures in a different
(random) order than they
appear on the portable
memory device.
Displays the date and time
that a picture was taken. This
feature is not available in
multi-image display mode.
Corrects colors in the image.
www.insigniaproducts.com
25
NS- DPF0812W
Menu
option
Slideshow
Settings
(continued)
Frame
Orientation
Image display
format
Copy type Normal Maintains the picture's original
Settings Description
Panorama Scroll
•On
•Off
Landscape
Portrait
Normal
Zoom
Resize Optimizes (resizes) a picture
When Panorama Scroll is
enabled, pictures that were
taken in panorama mode are
scrolled across the screen
during slideshows rather than
resized to fit the screen.
Changes the display
orientation of images.
Adjusts how the image is sized
to fit the screen. If the pictures
you are viewing are in 4:3
format, they will have black
bars on the sides of the screen
with the Normal setting
enabled. Zoom hides the
black bars by zooming in on
the image and cropping it.
resolution when a picture file
is copied from a portable
memory device to the frame's
internal memory.
file when it is copied from a
portable memory device to
the frame's internal memory.
Enabling this feature lets you
store more files in your frame's
internal memory. Using this
setting lets you store the
maximum number of pictures
in your frame’s internal
memory.
26
www.insigniaproducts.com
8" Digital Picture Frame
Menu
option
Power saving Off
Language English
Sort image
mode
Fac tor y
Settings
Settings Description
15 Minutes
30 Minutes
1 Hour
2 Hours
4 Hours
Spanish
French
File name A-Z
File name Z-A
Date, oldest to newest
Date, newest to oldest
Demo Mode
•On
•Off
Reset All Settings
•No
•Yes
Erase Internal
Memory
•No
•Yes
Software Version Displays the software
Sets the power save option. If
the buttons on the frame or
remote control are not used
for the specified time, the
frame enters Power Saving
(Standby) mode.
To turn the frame back on,
press any button on the frame.
Sets the language used in the
setup menus.
Lets you sort files in the order
you select.
Displays pictures from internal
memory for demo purposes.
Resets all settings to factory
default values.
Erases all files from the internal
memory.
(firmware) version.
www.insigniaproducts.com
27
NS- DPF0812W
Maintaining
Cleaning the digital picture frame
Make sure the frame is unplugged from the power source.
Use the supplied cleaning cloth, or a cloth slightly
dampened with water, for cleaning the exterior of the frame
only.
Replacing the remote control battery
To replace the remote control battery:
Turn the remote control over.
1
2 While pressing down on the ridged area of the battery
cover, slide the battery tray out and remove the old
battery.
3 Place a new CR2025 (or equivalent) lithium battery in
the tray, with the positive (+) side facing up.
4 Slide the battery tray back into the remote control.
28
www.insigniaproducts.com
8" Digital Picture Frame
Troubleshooting
Problem Solution
The frame will not
turn on.
A portable memory
device is inserted in
the frame, but you
can’t view your
pictures.
The frame displays
some pictures more
slowly than others.
The power adapter is not securely connected to
the picture frame, or the power switch is not on.
Check power adapter connections, then switch
the power on.
• Make sure that the portable memory
device is one of the supported formats
and that the files on the device are JPEG
image files.
• Turn the digital picture frame off and
make sure that the portable memory
device is inserted all the way into the slot
or port and is inserted correctly, then turn
it back on. After a few seconds, you should
see your first picture.
• Try formatting the portable memory
device.
Cautio n: Formatting the device erases all files on
the device. Back up the files on the devi ce to your
computer before attempting to format the
device.
•Some digital cameras save images in
formats other than JPEG. Refer to your
camera’s manual for details.
Higher resolution pictures load more slowly. Try
using lower resolution pictures or
down-sampling (compressing or resizing) them.
See your camera’s user guide for instructions on
down-sampling your pictures, or see “Setting
viewing options” on page 24 for instructions on
automatically resizing and compressing your
pictures while copying them from a portable
memory device to the frame's internal memory.
www.insigniaproducts.com
29
NS- DPF0812W
Specifications
Screen size 8" (203 mm)
Screen format 4:3
Memory card formats • Secure Digital™ (SD)
File formats Standard JPEG
USB USB (type A) port and Mini-USB port
Power input 100 V~240 V AC, 50~60 Hz
Power output 5 V DC, 1 A
Certification FCC/ICES-003 and CUL/International Efficiency
Internal memory 2 GB (1.75 GB user accessible)
•SDHC™
• MultimediaCard (MMC™)
•Memory Stick
• Memory Stick PRO Duo™ (requires an
adapter - not included)
•xD™
• microSD™ (requires adapter - not
included)
Marking Level V (adapter)
®
30
www.insigniaproducts.com
8" Digital Picture Frame
Legal notices
FCC Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/T V technician for
help.
FCC Caution
Changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to operate
the equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Image use restrictions
Use of the images pre-loaded on the digital picture frame is limited to
personal, non-commercial use. Consumer may not modify, duplicate,
distribute, retransmit, republish, reproduce, or create derivative
works from the pre-loaded images.
www.insigniaproducts.com
31
6-month limited warranty
Insignia Products (“Insignia”) warrants to you, the original purchaser
of this new NS-DPF0812W (“Product”), that the Product shall be free
of defects in the original manufacture of the material or
workmanship for a period of 6 months from the date of your
purchase of the Product (“Warranty Period”). This Product must be
purchased from an authorized dealer of Insignia brand products and
packaged with this warranty statement. This warranty does not cover
refurbished Product. If you notify Insignia during the Warranty Period
of a defect covered by this warranty that requires service, terms of
this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 6 months from the date you purchased
the Product. The purchase date is printed on the receipt you received
with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store personnel,
Insignia will (at its sole option): (1) repair the Product with new or
rebuilt parts; or (2) replace the Product at no charge with new or
rebuilt comparable products or parts. Products and parts replaced
under this warranty become the property of Insignia and are not
returned to you. If service of Products or parts are required after the
Warranty Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product during
the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it from.
Make sure t hat you place the Product in its or iginal packaging or
packaging that provides the same amount of protection as the
original packaging. If you purchased the Product from an online web
site, mail your original receipt and the Product to the address listed
on the web site. Make sure that you put the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging.
NS- DPF0812W
32
www.insigniaproducts.com
8" Digital Picture Frame
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in
the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
•Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
•Accident
•Misuse
•Abuse
•Negligence
•Commercial use
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static (non-moving) images
applied for lengthy periods (burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by
Insignia to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
• Products where the factor y applied serial number has been
altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS
MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES,
WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
www.insigniaproducts.com
33
NS- DPF0812W
Contact I nsignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645
© 2011 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand names
are trademarks of their respective owners.
34
www.insigniaproducts.com
8" Digital Picture Frame
www.insigniaproducts.com
35
www.insigniaproducts.com (877) 467-4289
Distributed by Be st Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN 55423-3645 USA
© 2011 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
11-0578
Loading...