Insignia NS-DLS755BK User Manual
Quick Start Guide | NS-DLS75SBK
6' 3-Section Light Stand
PACKAGE CONTENTS
• Light stand
• Carry bag
• Quick Start Guide
FEATURES
• 3-section design extends up to 6 ft
• Cushioned main pole dampens motion
• Compact design folds to 28.5” for easy
portability
• Stand holds your studio lights, ashes,
umbrellas and reectors such as:
Umbrella Bracket
with Flash Mount
NS-DUBR1S NOT INCLUDED
Dual Layer
Convertible Umbrella
NSDU33DL NOT INCLUDED
# ITEM
1 1/4” mounting
screw
DESCRIPTION
Use this screw to mount
a device such as a studio
light, ash, or umbrella
bracket.
NOTE: Some studio ash heads or umbrella brackets slide
all the way over this mount area and fasten in place with a
locking clamp.
2 Upper screw knob
Lock or loosen the rst
section tube of the light
stand
3 Lower screw knob
Lock or loosen the
second section tube of
the light stand
4 Leg locking
knob
Lock the light stand legs
in place to provide
maximum stability &
strength
USING YOUR LIGHT STAND
1 Loosen the leg locking knob.
Before using your new product, please read these instructions to prevent any damage.
Leg locking knob
2 Pull outward on the legs. Set upright,
then push down on the legs and
tighten the leg locking knob.
3 Loosen the lower screw knob. Then
extend the center column to the
length you want.
SPECIFICATIONS
• Warranty: 12 months parts & labor
• Maximum operating height: 74.8 in. (190cm)
• Minimum operating height: 28.3 in. (72cm)
• Folded height: 28.5in (72.4cm)
• Net weight: 3.4 lbs (1.54 kg)
• Max operating load: 8.8 lbs (4 kg)
• Number of leg sections: 3
• Material: Aluminum & Iron
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
Lower screw knob
4 Tighten the lower screw knob.
5 Loosen the upper screw knob. Then
extend the center column to the
length you want.
Upper screw knob
IMPORTANT SAFETY INSTRUCTIONS
To prevent damage to your lighting equipment or
injury to you or others, read the following safety
precautions in the entirety before using the stand.
1 Read and understand all instructions before
using.
2 Keep these instructions.
3 Close supervision is necessary when any
appliance is used by or near children. Do not
leave the appliance unattended while in use.
4 Do not place the light stand on an uneven
surface. Your stand may tip over and cause
property damage or personal injury.
NOTE: Do not exceed the 8.8 lb maximum load
capacity of this light stand. Avoid mounting heavier
or unbalanced loads on the stand to prevent an
accidental fall, bodily injury or damage to your
equipment.
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
6 Tighten the upper screw knob for the
second section lock.
7 Attach your studio light, ash,
umbrella or other item for use.
V1 ENGLISH 15-0322
Loading...