Insignia NS-DGPK15 Quick Setup Manual
QUICK SETUP GUIDE
Everyday Adventures
Accessory Kit for GoPro®
NS-DGPK15
ITEM
Head strap
Suction cup mount
DESCRIPTION
Use to secure your GoPro to your head. Attach your GoPro using the thumb
screw. Adjust the head strap mount to t comfortably and securely. Can be
worn backwards for a unique perspective.
Use to attach your GoPro to cars, boats, or other vehicles. Screw the tripod
to GoPro mount adapter (see below) into the mount holder, then attach
your GoPro using the thumb screw. Press the suction cup to your vehicle’s
surface, then push the lock down.
Note: Attach the safety cable to prevent your GoPro from falling.
ITEM
Triple-ex handle with tripod
Bicycle handlebar mount
DESCRIPTION
Use to get a shot down low, up high, of yourself, or nearly
anything else. The detachable tripod stores inside the handle
for convenience and versatility.
Use to attach the GoPro camera to handlebars, seatposts, ski
poles, and more. Use with the Tripod to GoPro mount
adapter.
HOW TO USE THE TRIPLEFLEX HANDLE WITH
TRIPOD
• This ultra-versatile mount is a three-in-one design. It can be used as a
camera grip, an extension arm, or a tripod for ultra-versatility and a
variety of shots.
Note: To protect your ngers from being pinched in case the unfolded arm
closes suddenly, press and hold the silver safety button to fully close the mount
once open. The button does not need to be pressed to open the mount.
Camera grip
FEATURES
• Compatible with most GoPro cameras, including the HERO and
Session lines (camera must be in housing or frame to allow attachment to accessories). Also compatible with other equipment adapted
to the standard GoPro mount.
• Perfect for carrying, storing, securing, and using your GoPro camera.
Accessories allow for use on cars, boats, and bikes, as well as
handheld, freestanding, or head mounting.
PACKAGE CONTENTS
• Accessories for GoPro (see table)
Note: Place your GoPro inside its housing (included with or attached to your
GoPro, not included with this kit) to mount with these accessories.
• Quick Setup Guide
Before using your new product, please read these instructions to prevent any damage.
Tripod to GoPro mount
adapter (2)
Safety tether cable
Use with the suction cup and bicycle handlebar mount or any other
standard tripod.
Use in any situation where you risk losing your GoPro if it falls (for
example, while boating or biking). Connect directly to your GoPro and a
xed object such as a boat railing, sideview mirror, or other suitable
location.
Note: Do not attach the safety tether cable to your body, clothing, or safety gear.
Thumb screws (2)
Semi-hard carrying case
Note: The accessories, except the Semi-soft carrying case, are water resistant, but
they must be rinsed with clean, fresh water and allowed to dry completely after
use. Items used in salt water must IMMEDIATELY be rinsed with clean, fresh water
and dried after use. User is responsible for ensuring that the attached camera is
waterproof.
Use to secure your GoPro to mounts or adapters in this kit or
as replacements for other accessories.
Note: Thumb screws will come attached to other accessories. They
can be removed and used where they are needed.
Use to carry your GoPro and a few essential accessories.
Contains a spot for one Hero or Session camera, memory
cards and batteries, as well as a wide range of GoPro
accessories. The front open slot is intended for the triple ex
handle with tripod.
Note: To maintain portability, not all of the included accessories will
t in this case. The intended use is on the go where all accessories
might not be required.
Extension arm
Tripod
• The handle can be detached from the arm and used as a lightweight
camera grip.
1 Rotate the locking thumb screw counterclockwise.
2 Remove the extension arm and the locking thumb screw from the
handle.
3 Place the camera onto the handle, and then rotate the thumb screw
clockwise to secure the camera to the handle.
Note: Use a new thumb screw (included) when attaching the camera.
• Inside the handle is a small tripod that can be removed and used on
its own or combined with the handle.
How to use the integrated tripod individually
1 Remove the top of the integrated tripod. (This may take a bit of effort.)
2 Unfold the tripod arms.
3 Place the camera onto the handle, and then rotate the thumb screw
clockwise to secure the camera to the integrated tripod.
3 Unfold the tripod arms.
Note: In certain positions, the arm will not be stable and the camera will fall
over. Carefully test your conguration and do not trust the tripod to keep
your camera secure in case of bumps, wind, or shifting surfaces.
• The folding arm is perfect for POV or follow-cam footage, and it makes
it easy to capture seles without the mount appearing in the shot.
REMOVING THE INTEGRATED TRIPOD FROM THE
HANDLE
How to remove the integrated tripod
1 Rotate the notch at the base of the handle counterclockwise to
loosen the integrated tripod.
2 Remove the integrated tripod from the handle.
How to use the integrate tripod with the handle
1 Push the notch on the integrate tripod into the base of the handle.
2 Rotate the integrated tripod clockwise.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
GOPRO, HERO, Session, the GOPRO logo, and the GoPro Be a Hero logo are trademarks or registered
trademarks of GoPro, Inc.
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 17-0493
Loading...