47” Espresso
Gaming TV Stand
NS-13SGAM
USER GUIDE
SAFETY INFORMATION AND SPECIFICATIONS....2
PACKAGE CONTENTS: PARTS.....................................3
PACKAGE CONTENTS: HARDWARE..........................5
ASSEMBLY INSTRUCTIONS.........................................6
CARE AND MAINTENANCE...................................... 24
Before using your new product, please read these instructions to prevent any damage.
47” ESPRESSO GAMING TV STAND
Maximum weight: 95 lbs. (43 kg)
Maximum width: 1-inch overhang on each
side of the top shelf
Overall dimensions (W × H × D):
47.3 × 26.5 × 19.5" (120 × 67.3 × 49.5 cm)
47.3" (120 cm)
19.5" (49.5 cm)
26.5" (67.3 cm)
95 lbs. (43 kg)
30 lbs. (13.6 kg)
25 lbs. (11.3 kg)
45 lbs. (18.1 kg)
Drawer will
hold 15 lbs.
(6.8 kg)
Drawer will
hold 15 lbs.
(6.8 kg)
SAFETY INFORMATION AND SPECIFICATIONS
CAUTION: The top surface of this stand
is designed for use with a product
weighing no more than
95 lbs. (43 kg) and having a width that
permits it to sit evenly on the stand
with no more than a one-inch overhang on each
side of the shelf. Use with products that weigh more
than the maximum weight allowed, or with
dimensions that extend beyond the maximum
width may result in instability, which may result in
injury.
CAUTION: This product contains small
items that could be a choking hazard if
swallowed.
Keep these items away from young
children!
Model #: NS-13SGAM
2
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Phillips screwdriver
Hammer
A Right end (1) B Left end (1) C Right upright (1)
D Left upright (1)
F Top (1)
G Bottom (1)
H Shelf (1)
E Upright (1)
Tools needed:
PACKAGE CONTENTS: PARTS
www.insigniaproducts.com
3
PACKAGE CONTENTS: PARTS (CONTINUED)
I Back (1) J Adjustable shelf (1)
K Front skirt (1) L Side skirt (2)
M Drawer front (2)
R Left front/right
rear foot (2)
S Right front/left
rear foot (2)
T Center
foot (2)
D73 Drawer
back (2)
D16 Right drawer
side (2)
D17 Left
drawer side (2)
D720 Drawer
bottom (2)
47” ESPRESSO GAMING TV STAND
4
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Label Hardware Qty.
U2
V2
W2
X2
Y2 10
Z2 10
AA 1
BB 1
CC 4
DD 3
Right drawer rail
Left drawer rail
Right drawer slide
Left drawer slide
Hidden cam
Cam dowel
Corner cap
Foot bracket
Corner bracket
Metal bracket
Label Hardware Qty.
EE 2
FF 4
GG 4
HH 10
II 4
JJ 1
KK 10
LL 8
MM 2
NN 35
OO 16
PP 48
Knob
Side cam
Cam cover
Metal pin
Rubber sleeve
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death
can occur. The TV and furniture will be
unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
Warning label
Black 1-15/16" flat head screw
Black 1-9/16" flat head screw
Gold 1" machine screw
Black 9/16" large head screw
Gold 5/16" flat head screw
Nail
PACKAGE CONTENTS: HARDWARE
Note: You may receive extra hardware. Make sure you have all the hardware necessary to
assemble your new TV stand:
10 20 30 40 50 60 70 80 90 100mm
1234in
www.insigniaproducts.com
5
47” ESPRESSO GAMING TV STAND
Important: Do not tighten the hidden cams in this step.
Arrow
Arrow
Y2 (10)
Z2 (10)
ASSEMBLY INSTRUCTIONS
Step 1: Assemble the ends and uprights
Note: Assemble your TV stand on carpeted floor or on the empty carton to avoid scratching your stand or the floor.
1 Push two hidden cams (Y2) into the right end (A), left end (B), and right upright (C) and four hidden cams in the
shelf (H). Make sure that the arrows on the hidden cams point to the holes on the edges of the right end, left
end, right upright, and shelf.
2 Insert the metal end of a cam dowel (Z2) into the side of each hidden cam, then press in on the dowel until it
snaps into place.
Z2
Y2
Y2
Z2
6
You’ll need:
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
OO
OO
OO
OO
OO
OO
OO
OO
OO
OO
Rounded
edge
Roller
ends
Finished
edge
Roller
ends
V (2) OO (8)U (2)
Phillips screwdriver
Step 2: Attaching the drawer rails
• Fasten the two right drawer rails (U) to the right end (A) and the two left drawer rails (V) to the right upright (C)
using two gold 5/16" flat head screws (OO) per rail.
You’ll need:
www.insigniaproducts.com
7
47” ESPRESSO GAMING TV STAND
Arrow
Make sure that you turn the
hidden cam a minimum of
190° to a maximum of 210°.
Note the position of the arrow
on the hidden cam.
Arrow
In the illustration below,
the hidden cam has not
been tightened enough.
210°
190°
Phillips screwdriver
Tip: How to tighten hidden cams
In the remaining steps, use these illustrations for instructions on tightening hidden cams.
War ning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not
completely tightened will loosen, and parts may separate.
You’ll need:
8
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
HH
Surface with
holes
Rounded edge
Finished edge
Rounded
edge
Arrow
210°
S
u
r
f
a
c
e
w
i
t
h
h
i
d
d
e
n
ca
m
s
190°
HH (2)
Phillips screwdriver
Step 3: Attach the top to the left end
1 Identify the rounded edge on the left end (B) and the top (F) and the finished edge on the upright (E). Make sure
these edges face the same direction.
2 Place the top (F) face down, then insert the cam dowels on the left end (B) into the holes on the top (F). The side
of the left end (B) that has the hidden cams should face the center of the top (F). Use a Phillips screwdriver to
tighten the two hidden cams in the left end (B).
3 Insert two metal pins (HH) in the upright (E), then insert the other ends of the metal pins into the holes in the
top (F).
You’ll need:
www.insigniaproducts.com
9
Step 4: Attach the shelf
210°
Arrow
Finished edge
190°
KK (2)
Phillips screwdriver
1 Make sure that the side of the shelf (H) with the hidden cams faces up, and the finished edge faces the same
direction as the finished edge on the upright (E).
2 Insert the cam dowels on the edge of the shelf (H) into holes on the left end (B), then use a Phillips screwdriver
to tighten the hidden cams in the shelf (H).
3 Fasten the shelf (H) to the upright (E) using two black 1-15/16" flat head screws (KK).
47” ESPRESSO GAMING TV STAND
KK
KK
10
You’ll need:
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
210°
Arrow
S
u
r
f
a
c
e
W
I
T
H
OU
T
h
o
le
s
S
u
r
f
a
c
e
w
i
t
h
r
a
i
l
s
Finished edges
190°
Phillips screwdriver
HH (2)
Step 5: Install the uprights
1 Make sure that the finished edge on the right upright (C) and on the left upright (D) faces the same direction as
the finished edge on the shelf (H).
2 Insert the two cam dowels on the right upright (C) into the holes on the shelf (H), then use a Phillips screwdriver
to tighten the hidden cams on the right upright (C).
3 Insert two metal pins (HH) into the left upright (D), then insert the other ends of the metal pins into the holes in
the shelf (H).
HH
You’ll need:
www.insigniaproducts.com
11
Step 6: Install the right end
S
u
r
f
a
c
e
w
i
t
h
r
a
i
l
s
Rounded
edge
210°
Arrow
190°
Phillips screwdriver
1 Make sure that the side of right end (A) that has the rails attached faces the center of your TV stand.
2 Insert the cam dowels on the edge of the right end (A) into the holes on the top (F), and insert the cam dowels
on the edge of the shelf (H) into the holes on the right end (A).
3 Use a Phillips screwdriver to tighten the four hidden cams: two in the right end (A) and two in the shelf (H).
47” ESPRESSO GAMING TV STAND
12
You’ll need:
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Rounded edge
Phillips screwdriver
KK (8)
Step 7: Install the bottom
1 Make sure that the rounded edge on the bottom (G) faces forward.
2 Fasten the bottom (G) to the ends (A and B) and uprights (C and D) using eight black 1-15/16" flat head
screws (KK).
KK
KK
KK
KK
KK
KK
KK
KK
You’ll need:
www.insigniaproducts.com
13
Step 8: Install the corner brackets
NN
CC
CC
CC
CC
NN
NN
NN
NN
NN
NN
NN
NN
NN
CC
NN
NN
CC
NN
NN
CC
NN
NN
CC
Finished
edge
Finished
edge
Phillips screwdriver
CC (4)
NN (16)
1 Fasten four corner brackets (CC) to the feet (R and S) using two black 9/16” large head screws (NN) per bracket.
2 Make sure that the narrow edges of the feet (R and S) face the same direction as the finished edges of the side
skirts (L).
3 Fasten the feet (R and S) to the side skirts (L) by inserting two black 9/16" large head screws (NN) through each
corner bracket (CC). Tighten the screws.
47” ESPRESSO GAMING TV STAND
You’ll need:
14
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Holes should be here
F
i
n
i
s
h
e
d
e
d
g
e
Unfinished
edge
Phillips screwdriver
HH (2)
NN (8)
Step 9: Install the skirts
1 Insert a metal pin (HH) into each end of the front skirt (K).
2 Align the front skirt (K) to the front edge of the bottom (G), then insert the ends of the metal pins into the feet (R
and S). Make sure that the finished edges face up and toward the front.
3 Fasten the side skirts (L) to the bottom (G) by inserting two black 9/16" large head screws (NN) through each
corner bracket (CC). Tighten the screws.
NN
NN
CC
CC
NN
CC
NN
NN
NN
CC
NN
HH
NN
You’ll need:
www.insigniaproducts.com
NN
NN
CC
15
Step 10: Install the skirt brackets and the foot
NN
Phillips screwdriver
AA (1)
BB (1)
DD (3) NN (11)
1 Fasten three metal brackets (DD) to the bottom (G) and front skirt (K) using two black 9/16" large head
screws (NN) per bracket.
2 Fas ten t he foot bracket ( BB) to the bottom (G) using three black 9/16" large head screws (NN).
3 Slide the two center feet (T) onto the foot bracket (BB).
4 Use two black 9/16" large head screws (NN) to fasten the foot bracket (BB) to the center feet (T).
Note: There are no pre-drilled holes in the center feet (T). The screws tighten into the grooves.
5 Insert the corner cap (AA) into the grooves in the center feet (T).
47” ESPRESSO GAMING TV STAND
NN
NN
DD
NN
DD
NN
NN
NN
NN
NN
DD
NN
AA
BB
NN
DD
NN
16
You’ll need:
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Do not stand your TV stand upright
without the back attached. Your stand
might collapse.
These holes must line up
over the uprights and shelf.
PP (48) Hammer
Step 11: Install the back
1 Carefully turn your TV stand over onto its front edges. Unfold the back (I) and lay it over your TV stand.
2 Make equal margins along all four edges of the back (I). Push on opposite corners of your TV stand if needed to
make it “square.”
3 Fasten the back (I) to your TV stand using the 48 nails (PP).
Note: Make sure that you tap nails into the holes that line up over the uprights and shelf.
Note: Perforations have been provided for access through the back. Carefully cut out the holes needed.
PP
You’ll need:
www.insigniaproducts.com
17
Step 12: Assemble the drawer
Tab
Slot
Groove
Unfinished surface
The tabs should insert freely
into the slots. Gently tilt the
drawer sides from side to
side until the tabs slip into
the slots.
Be sure the drawer
bottom inserts
into the drawer
front groove.
1 Insert the tab on the right drawer side (D16) at an angle into the slot on the right side of a drawer front (M). The
tab should easily fit into the slot. Gently tilt the drawer side (D16) from side to side until the tab slips into the
slot. Repeat to fasten the left drawer side (D17) to the left side of the drawer front (M).
2 Slide a drawer bottom (D720) into the grooves in the drawer sides (D16 and D17) and drawer front (M).
3 Repeat this step to make the other drawer.
*U.S. Patent No. 6,413,007
47” ESPRESSO GAMING TV STAND
D16
D16
D17
D720
D16
D17
18
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
LL (8)
Phillips screwdriver
Step 13: Assemble the drawer (continued)
1 Fasten a drawer back (D73) to the drawer sides (D16 and D17) using four black 1-9/16" flat head screws (LL).
Note: Make sure that the drawer bottom (D720) inserts into the groove in the drawer back (D73).
2 Repeat this step for the other drawer.
LL
LL
D73
D16
D720
LL
LL
D17
You’ll need:
www.insigniaproducts.com
19
Step 14: Attach the drawer slides
FF
FF
OO
OO
OO
OO
D16
D17
Roller end
Turn t he cam to lin e up
the screw head with
the hole in slide.
Roller end
Turn the cam to line up
the screw head with
the hole in slide.
Phillips screwdriver
W (2) X (2) FF (4) OO (8)
1 Insert a slide cam (FF) into the drawer sides (D16 and D17).
2 Fasten the drawer slides (W and X) to the drawer sides (D16 and D17) using two gold 5/16" flat head
screws (OO) per slide.
Note: The drawer slides are marked “DRAWER RIGHT” and “DRAWER LEFT” for easy identification.
Note: The screw head in the cam must be visible through the slotted hole in the slide.
3 Repeat this step for the other drawer.
47” ESPRESSO GAMING TV STAND
You’ll need:
20
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
EE
MM
Phillips screwdriver
EE (2) MM (2)
Step 15: Attach the drawer knob
1 From the front of the drawer, align the knob (EE) over the hole in the drawer front (M), then fasten a knob (EE) to
the drawer front (M) using a gold 1" machine screw (MM).
2 Repeat this step for the other drawer.
You’ll need:
www.insigniaproducts.com
21
47” ESPRESSO GAMING TV STAND
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death
can occur. The TV and furniture will be
unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
Place the roller on the slide
behind the roller on the rail.
Note: This is a permanent
label intended to last for
the life of the product.
After you apply the label,
do not try to remove it.
Phillips screwdriver
WARNING
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death
can occur. The TV and furniture will be
unstable and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
GG (4)
HH (4)
JJ (1)
II (4)
Step 16: Install the metal shelf pins and the drawers, and attach the warning label
1 Carefully stand your TV stand upright.
2 Push the rubber sleeves (II) over the four remaining metal pins (HH). Insert the metal pins into the hole locations
of your choice in the left end (B) and left upright (D). Set the adjustable shelf (J) onto the metal pins.
3 Tip the front of a drawer down and drop the rollers on the drawer behind the rollers on your TV stand. Lift the
front of the drawer up and slide it into your TV stand. Repeat for the other drawer.
4 Push a cam cover (GG) onto each visible hidden cam.
5 Apply the warning label (JJ) to an area on the top (F) so that the TV will hide the label. Peel off the backing and
apply the label as shown in the diagram.
JJ
HH
II
22
You’ll need:
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
Screw #3
Cam
Phillips screwdriver
Step 17: Adjust the drawers
Note: Adjusting the drawers helps the drawer fronts line up better when the drawers are closed.
1 Loosen the #3 screws in the drawer slides a 1/4 turn, then turn the cams clockwise or counterclockwise. Notice
how the drawer raises or lowers as you turn the cams. The higher the screws in the oblong holes, the higher
your drawer front will be. The lower the screws, the lower the drawer front.
2 Tighten the #3 screws when you finish making adjustments.
32
You’ll need:
www.insigniaproducts.com
23
47” ESPRESSO GAMING TV STAND
CARE AND MAINTENANCE
Wood/Laminate
• Use your favorite type of furniture polish.
• Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand.
• Always test any polish in a discrete location first, such as the back of the stand, to make sure that there is no
adverse reaction.
• Dust frequently with a soft cloth.
• Never slide objects across surfaces. Lift objects from the top surface rather than dragging them across the finish
when moving them.
• Do not expose your stand to direct sunlight, drying heat sources, or dampness.
Glass
• Use a commercial liquid glass cleaner and a soft cloth.
• Do not use harsh powders or any other abrasive substances as they will scratch the glass.
• Clean spills immediately with a soft, damp cloth.
• Protect surfaces by using felt, leather, or cork under accessories.
• Use a protective pad when using your stand as a writing surface (especially when using a ballpoint pen).
• Dust frequently with a soft cloth.
WARNING
Please use your stand correctly and safely. Improper use can cause safety hazards or damage to your furniture or household items. Carefully read
the following chart.
Look out for: What can happen: How to avoid the problem:
• Children climbing on the stand.
• A child may try to reach a toy or other object by climbing
on the stand.
• Children will play and be active near the TV.
• Improper use of the stand to support TVs.
• The stand is designed for use with TVs will specify the
maximum weight rating and recommended size of the
TVs it will safely support.
• Overloaded shelves • Risk of injury.
•Improperly moving the stand. • The stand can tip over or break if improperly moved.
• Risk of injury or death.
• A child climbing on the stand can make it top-heavy and
cause it to tip over.
• A child playing with a TV can cause it to tip over.
• Risk of injury or death.
• TVs can be very heavy. Note, older CRT TVs tend to be
unbalanced and prone to tipping forward.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.
• Risk of injury.
• Never allow children to climb on or play with the stand.
• Do not place toys or food on the top shelves. Children may
try to climb to reach them out of curiosity.
• A TV must onl y be set on furniture specifically designed to
support a television.
• Never use a TV that exceeds the weight ratings or size
guidelines specified for the stand.
• Never exceed the weight limits shown in the instructions.
• Work from the bottom to the top when loading shelves.
• The bottom shelves can only support 25 lbs. while the top
can support 95 lbs.
• Unload shelves from the top to the bottom before moving
the stand.
• Do not push the stand, especially on a carpeted floor. Have a
friend help you lift the item and set it in place.
• Do not lift the stand using the top shelf. Lift from the frame
or leg assembly.
• Remove the TV before moving the TV stand.
24
www.insigniaproducts.com
47” ESPRESSO GAMING TV STAND
ONE-YEAR LIMITED WARRANTY - INSIGNIA
Definitions:
The Distributor* of Insignia branded products warrants to you,
the original purchaser of this new Insignia-branded product
(“Product”), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a
period of one (1) year from the date of your purchase of the
Product (“Warranty Period”).
For this warranty to apply, your Product must be purchased in
the United States or Canada from a Best Buy branded or Future
Shop branded retail store or online at www.bestbuy.com,
www.bestbuy.ca, or www.futureshop.ca and is packaged with
this warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. Your purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy or Future Shop retail
store location, please take your original receipt and the Product
to any Best Buy or Future Shop store. Make sure that you place
the Product in its original packaging or packaging that provides
the same amount of protection as the original packaging. If you
purchased the Product from a Best Buy or Future Shop online
web site (www.bestbuy.com, www.bestbuy.ca, or
www.futureshop.ca), mail your original receipt and the Product
to the address listed on the web site. Make sure that you put the
Product in its original packaging or packaging that provides the
same amount of protection as the original packaging.
To obtain warranty service, in the United States call
1-888-BESTBUY, Canada call 1-866-BESTBUY for Future Shop call
1-800-663-2275. Call agents may diagnose and correct the issue
over the phone.
• Modification of any part of the Product, including the
antenna
• Display panel damaged by static (non-moving) images
applied for lengthy periods (burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Insignia
to service the Product
• Products sold “as is” or “with all faults”
• Consumables, including but not limited to batteries (i.e. AA,
AAA, C etc.)
• Products where the factory applied serial number has been
altered or removed
• Loss or Theft of this product or any part of the product
• Display panels containing up to three (3) pixel failures (dots
that are dark or incorrectly illuminated) grouped in an area
smaller than one tenth (1/10) of the display size or up to
five (5) pixel failures throughout the display. (Pixel based
displays may contain a limited number of pixels that may
not function normally.)
• Failures or Damage caused by any contact including but
not limited to liquids, gels or pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS
OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT
NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT,
LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES
NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE
PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY
AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND
JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in USA with U.S. and imported materials
Where is the warranty valid?
This warranty is valid only in the United States and Canada at
Best Buy or Future Shop branded retail stores or websites to the
original purchaser of the product in the county where the
original purchase was made.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
• Installation
•Set up adjustments
• Cosmetic damage
• Damage due to weather, lightning, and other acts of God,
such as power surges
•Accidental damage
•Misuse
•Abuse
•Negligence
• Commercial purposes/use, including but not limited to use
in a place of business or in communal areas of a multiple
dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.
www.insigniaproducts.com
25
Certificate of Conformity
1. This certificate applies to the Insignia Product
identified by this instruction booklet.
2. This certificate applies to the compliance of this
product with the CPSC Ban on Lead-Containing
Paint (16 CFR 1303).
3. This product was manufactured for:
Insignia
4. Date of Manufacture: _______________
Lot number: 361848
1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproduc ts.com
INSIGNIA is a trademark o f Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in USA with U.S. and imported materials
V1 ENGLISH
14-0248
Loading...